Efficiency improvements to the Groupe Special Mobile (GSM) digital mobile radio system

Groupe Spécial Mobile (GSM) has been developed as the pan-European second generation of digital mobile systems. GSM operates in the 900 MHz frequency band and employs digital technology instead of the analogue technology of its predecessors. Digital technology enables the GSM system to operate in much smaller zones in comparison with the analogue systems. The GSM system will offer greater roaming facilities to its subscribers, extended throughout the countries that have installed the system. The GSM system could be seen as a further enhancement to European integration. GSM has adopted a contention-based protocol for multipoint-to-point transmission. In particular, the slotted-ALOHA medium access protocol is used to coordinate the transmission of the channel request messages between the scattered mobile stations. Collision still happens when more than one mobile station having the same random reference number attempts to transmit on the same time-slot. In this research, a modified version of this protocol has been developed in order to reduce the number of collisions and hence increase the random access channel throughput compared to the existing protocol. The performance evaluation of the protocol has been carried out using simulation methods. Due to the growing demand for mobile radio telephony as well as for data services, optimal usage of the scarce availability radio spectrum is becoming increasingly important. In this research, a protocol has been developed whereby the number of transmitted information packets over the GSM system is increased without any additional increase of the allocated radio spectrum. Simulation results are presented to show the improvements achieved by the proposed protocol. Cellular mobile radio networks commonly respond to an increase in the service demand by using smaller coverage areas. As a result, the volume of the signalling exchanges increases. In this research, a proposal for interconnecting the various entitles of the mobile radio network over the future broadband networks based on the IEEE 802.6 Metropolitan Area Network (MAN) is outlined. Simulation results are presented to show the benefits achieved by interconnecting these entities over the broadband Networks.

A spirochete isolated from a case of severe virulent ovine foot disease is closely related to a Treponeme isolated from human periodontitis and bovine digital dermatitis

The isolation of spirochetes from severe ovine foot disease has been reported recently by our research group. In this study we describe the preliminary classification of this spirochete based on nucleotide sequence analysis of the PCR-amplified 16S rRNA gene. Phylogenetic analysis of this sequence in comparison with other previously reported 16S rRNA gene sequences showed that the spirochete belonged to the treponemal phylotype Treponema vincentii which has been associated with bovine digital dermatitis and human periodontal disease. Further work is required to define the common virulence determinants of these closely related treponemes in the aetiology of these tissue destructive diseases.

Application of digital image processing techniques to the photometric testing of vehicle headlamps

The aim of this Interdisciplinary Higher Degrees project was the development of a high-speed method of photometrically testing vehicle headlamps, based on the use of image processing techniques, for Lucas Electrical Limited. Photometric testing involves measuring the illuminance produced by a lamp at certain points in its beam distribution. Headlamp performance is best represented by an iso-lux diagram, showing illuminance contours, produced from a two-dimensional array of data. Conventionally, the tens of thousands of measurements required are made using a single stationary photodetector and a two-dimensional mechanical scanning system which enables a lamp's horizontal and vertical orientation relative to the photodetector to be changed. Even using motorised scanning and computerised data-logging, the data acquisition time for a typical iso-lux test is about twenty minutes. A detailed study was made of the concept of using a video camera and a digital image processing system to scan and measure a lamp's beam without the need for the time-consuming mechanical movement. Although the concept was shown to be theoretically feasible, and a prototype system designed, it could not be implemented because of the technical limitations of commercially-available equipment. An alternative high-speed approach was developed, however, and a second prototype syqtem designed. The proposed arrangement again uses an image processing system, but in conjunction with a one-dimensional array of photodetectors and a one-dimensional mechanical scanning system in place of a video camera. This system can be implemented using commercially-available equipment and, although not entirely eliminating the need for mechanical movement, greatly reduces the amount required, resulting in a predicted data acquisiton time of about twenty seconds for a typical iso-lux test. As a consequence of the work undertaken, the company initiated an 80,000 programme to implement the system proposed by the author.

Asynchronous digital optical regenerator for 4 x 40 Gbit/s WDM to 160 Gbit/s OTDM conversion

We propose and numerically analyse an asynchronous digital optical regenerator using a single-EAM loop and a novel neighbor-combine approach. It effectively re-synchronizes input signals with arbitrary phases to the local clock, and regenerates signals with high amplitude fluctuation and polarization mode dispersion. We demonstrate the application of this regenerator for 4 x 40 Gbit/s WDM to 160 Gbit/s OTDM conversion.

Asynchronous digital optical regenerator for 4 x 40 Gbit/s WDM to 160 Gbit/s OTDM conversion

We propose and numerically analyse an asynchronous digital optical regenerator using a single-EAM loop and a novel neighbor-combine approach. It effectively re-synchronizes input signals with arbitrary phases to the local clock, and regenerates signals with high amplitude fluctuation and polarization mode dispersion. We demonstrate the application of this regenerator for 4 x 40 Gbit/s WDM to 160 Gbit/s OTDM conversion.

Public libraries and the right to the [smart] city

The future of public libraries has been threatened by funding cuts and new digital technologies which have led many people to question their traditional role and purpose. However, freedom of information, ready access to knowledge and information literacy in all its digital and analog guises are more important than ever. Thus, public libraries remain significant spaces and places where people can socially interact and learn. In many countries public libraries are reinventing themselves and part of this process has been the redesign of library services and the design and construction of new library building and facilities that articulate the values, purpose and role of what has been termed 'the next library'. Following discussion of new library developments in London, Birmingham and Worcester in the UK, Aarhus in Denmark and Helsinki in Finland, the article concludes that public libraries are now both social and media spaces as well as being important physical places that can help city dwellers decide what type of urban world they want to see.

Development of a digital tool to overcome the challenges of rural food SMEs

It has been recognised that throughout the UK, rural economies have a significant potential for growth but despite the potential for growth, many rural businesses face barriers that prohibit their expansion. In this study, we focus on one particular group of rural small- to medium-sized enterprises (SMEs): food and drink producers. Through user engagement activities, we identify the issues and needs associated with distributing products to the market, in order to understand the main issues which prevent rural food and drink SMEs from expansion, and to establish the requirements for a digital solution to this challenge.

Writing online:a guide to effective digital communication at work

Online writing plays a complex and increasingly prominent role in the life of organizations. From newsletters to press releases, social media marketing and advertising, to virtual presentations and interactions via e-mail and instant messaging, digital writing intertwines and affects the day-to-day running of the company - yet we rarely pay enough attention to it. Typing on the screen can become particularly problematic because digital text-based communication increases the opportunities for misunderstanding: it lacks the direct audio-visual contact and the norms and conventions that would normally help people to understand each other. Providing a clear, convincing and approachable discussion, this book addresses arenas of online writing: virtual teamwork, instant messaging, emails, corporate communication channels, and social media. Instead of offering do and don’t lists, however, it teaches the reader to develop a practice that is observant, reflective, and grounded in the understanding of the basic principles of language and communication. Through real-life examples and case studies, it helps the reader to notice previously unnoticed small details, question previously unchallenged assumptions and practices, and become a competent digital communicator in a wide range of professional contexts.