Enhancing student learning experience through a novel electronic coursework assessment and feedback management system

Recent National Student Surveys revealed that many U.K. university students are dissatisfied with the timeliness and usefulness of the feedback received from their tutors. Ensuring timeliness in marking often results in a reduction in the quality of feedback. In Computer Science where learning relies on practising and learning from mistakes, feedback that pin-points errors and explains means of improvement is important to achieve a good student learning experience. Though suitable use of Information and Communication Technology should alleviate this problem, existing Virtual Learning Environments and e-Assessment applications such as Blackboard/WebCT, BOSS, MarkTool and GradeMark are inadequate to support a coursework assessment process that promotes timeliness and usefulness of feedback while maintaining consistency in marking involving multiple tutors. We have developed a novel Internet application, called eCAF, for facilitating an efficient and transparent coursework assessment and feedback process. The eCAF system supports detailed marking scheme editing and enables tutors to use such schemes to pin-point errors in students' work so as to provide helpful feedback efficiently. Tutors can also highlight areas in a submitted work and associate helpful feedback that clearly links to the identified mistakes and the respective marking criteria. In light of the results obtained from a recent trial of eCAF, we discuss how the key features of eCAF may facilitate an effective and efficient coursework assessment and feedback process.

Techno-economic assessment and uncertainty analysis of thermochemical processes for second generation biofuels

Biomass-To-Liquid (BTL) is one of the most promising low carbon processes available to support the expanding transportation sector. This multi-step process produces hydrocarbon fuels from biomass, the so-called “second generation biofuels” that, unlike first generation biofuels, have the ability to make use of a wider range of biomass feedstock than just plant oils and sugar/starch components. A BTL process based on gasification has yet to be commercialized. This work focuses on the techno-economic feasibility of nine BTL plants. The scope was limited to hydrocarbon products as these can be readily incorporated and integrated into conventional markets and supply chains. The evaluated BTL systems were based on pressurised oxygen gasification of wood biomass or bio-oil and they were characterised by different fuel synthesis processes including: Fischer-Tropsch synthesis, the Methanol to Gasoline (MTG) process and the Topsoe Integrated Gasoline (TIGAS) synthesis. This was the first time that these three fuel synthesis technologies were compared in a single, consistent evaluation. The selected process concepts were modelled using the process simulation software IPSEpro to determine mass balances, energy balances and product distributions. For each BTL concept, a cost model was developed in MS Excel to estimate capital, operating and production costs. An uncertainty analysis based on the Monte Carlo statistical method, was also carried out to examine how the uncertainty in the input parameters of the cost model could affect the output (i.e. production cost) of the model. This was the first time that an uncertainty analysis was included in a published techno-economic assessment study of BTL systems. It was found that bio-oil gasification cannot currently compete with solid biomass gasification due to the lower efficiencies and higher costs associated with the additional thermal conversion step of fast pyrolysis. Fischer-Tropsch synthesis was the most promising fuel synthesis technology for commercial production of liquid hydrocarbon fuels since it achieved higher efficiencies and lower costs than TIGAS and MTG. None of the BTL systems were competitive with conventional fossil fuel plants. However, if government tax take was reduced by approximately 33% or a subsidy of £55/t dry biomass was available, transport biofuels could be competitive with conventional fuels. Large scale biofuel production may be possible in the long term through subsidies, fuels price rises and legislation.

Direct cavity assessment and mode optimisation technique for DFB fibre laser

A technique for direct real-time assessment of a distributed feedback fibre laser cavity conditions during operation is demonstrated and used to provide a cavity mode conditioning feedback mechanism to optimise output performance. Negligible wavelength drift is demonstrated over a 52 mW pump power range.

Examining the relationship between risk assessment and risk management in mental health

Risk assessment is crucial for developing risk management plans to prevent or minimize mental health patients' risks that will impede their recovery. Risk assessments and risk management plans should be closely linked. Their content and the extent to which they are linked within one Trust is explored. There is a great deal of variability in the amount and detail of risk information collected by nurses and how this is used to develop risk management plans. Keeping risk assessment information in one place rather than scattered throughout patient records is important for ensuring it can be accessed easily and linked properly to risk management plans. Strengthening the link between risk assessment and management will help ensure interventions and care is tailored to the specific needs of individual patients, thus promoting their safety and well-being. Thorough risk assessment helps in developing risk management plans that minimize risks that can impede mental health patients' recovery. Department of Health policy states that risk assessments and risk management plans should be inextricably linked. This paper examines their content and linkage within one Trust. Four inpatient wards for working age adults (18-65 years) in a large mental health Trust in England were included in the study. Completed risk assessment forms, for all patients in each inpatient ward were examined (n= 43), followed by an examination of notes for the same patients. Semi-structured interviews took place with ward nurses (n= 17). Findings show much variability in the amount and detail of risk information collected by nurses, which may be distributed in several places. Gaps in the risk assessment and risk management process are evident, and a disassociation between risk information and risk management plans is often present. Risk information should have a single location so that it can be easily found and updated. Overall, a more integrated approach to risk assessment and management is required, to help patients receive timely and appropriate interventions that can reduce risks such as suicide or harm to others. © 2011 Blackwell Publishing.

Direct real-time cavity mode assessment and optimization technique for fiber lasers

A simple technique for direct real-time assessment of a fiber laser cavity-mode condition during operation is demonstrated. Mode stabilization and optimization with this cavity-mode monitoring and conditioning feedback scheme shows significant improvements to the output performance.

Integrated project evaluation and selection using multiple-attribute decision-making technique

The evaluation and selection of industrial projects before investment decision is customarily done using marketing, technical and financial information. Subsequently, environmental impact assessment and social impact assessment are carried out mainly to satisfy the statutory agencies. Because of stricter environment regulations in developed and developing countries, quite often impact assessment suggests alternate sites, technologies, designs, and implementation methods as mitigating measures. This causes considerable delay to complete project feasibility analysis and selection as complete analysis requires to be taken up again and again till the statutory regulatory authority approves the project. Moreover, project analysis through above process often results sub-optimal project as financial analysis may eliminate better options, as more environment friendly alternative will always be cost intensive. In this circumstance, this study proposes a decision support system, which analyses projects with respect to market, technicalities, and social and environmental impact in an integrated framework using analytic hierarchy process, a multiple-attribute decision-making technique. This not only reduces duration of project evaluation and selection, but also helps select optimal project for the organization for sustainable development. The entire methodology has been applied to a cross-country oil pipeline project in India and its effectiveness has been demonstrated. © 2005 Elsevier B.V. All rights reserved.

Social impact assessment of a sewerage project in Barbados

This report investigates why a nationally important and internationally funded infrastructural project within the Caribbean island of Barbados — The South Coast Sewerage Project — spurned a substantial level of negative socio-economic externalities. Primary and secondary research evaluated the presence or effectiveness of social impact assessment as a mitigation tool. The mitigation measures suggested within the appraisal report appear to have been considered by the Project Execution Unit (PEU) of Government of Barbados. The primary obstacle seems to have been the implementation of the mitigation process by the contractor. This highlights the need to foster an interconnected and symbiotic relationship between appraisal and implementation, if an initiative is to be conducted efficiently and effectively. Additionally, the South Coast Sewerage Project exemplifies the importance of establishing and sustaining a monitoring/control mechanism as an integral part of project construction.

FOCUS : frailty management optimisation through EIPAHA commitments and utilisation of stakeholders’ input – an innovative European project in elderly care

The goal of FOCUS, which stands for Frailty Management Optimization through EIPAHA Commitments and Utilization of Stakeholders’ Input, is to reduce the burden of frailty in Europe. The partners are working on advancing knowledge of frailty detection, assessment, and management, including biological, clinical, cognitive and psychosocial markers, in order to change the paradigm of frailty care from acute intervention to prevention. FOCUS partners are working on ways to integrate the best available evidence from frailty-related screening tools, epidemiological and interventional studies into the care of frail people and their quality of life. Frail citizens in Italy, Poland and the UK and their caregivers are being called to express their views and their experiences with treatments and interventions aimed at improving quality of life. The FOCUS Consortium is developing pathways to leverage the knowledge available and to put it in the service of frail citizens. In order to reach out to the broadest audience possible, the FOCUS Platform for Knowledge Exchange and the platform for Scaling Up are being developed with the collaboration of stakeholders. The FOCUS project is a development of the work being done by the European Innovation Partnership on Active and Healthy Ageing (EIPAHA), which aims to increase the average healthy lifespan in Europe by 2020 while fostering sustainability of health/social care systems and innovation in Europe. The knowledge and tools developed by the FOCUS project, with input from stakeholders, will be deployed to all EIPAHA participants dealing with frail older citizens to support activities and optimize performance.

Decision support system for project selection

The evaluation and selection of industrial projects before investment decision is customarily done using marketing, technical, and financial information. Subsequently, environmental impact assessment and social impact assessment are carried out mainly to satisfy the statutory agencies. Because of stricter environment regulations in developed and developing countries, quite often impact assessment suggests alternate sites, technologies, designs, and implementation methods as mitigating measures. This causes considerable delay to complete project feasibility analysis and selection as complete analysis requires to be taken up again and again until the statutory regulatory authority approves the project. Moreover, project analysis through the above process often results in suboptimal projects as financial analysis may eliminate better options as more environment friendly alternative will always be cost intensive. In this circumstance, this study proposes a decision support system which analyses projects with respect to market, technicalities, and social and environmental impact in an integrated framework using analytic hierarchy process, a multiple attribute decision-making technique. This not only reduces duration of project evaluation and selection, but also helps select an optimal project for the organization for sustainable development. The entire methodology has been applied to a cross-country oil pipeline project in India and its effectiveness has been demonstrated. © 2008, IGI Global.

Integrated approach to project feasibility analysis:a case study

Feasibility studies of industrial projects consist of multiple analyses carried out sequentially. This is time consuming and each analysis screens out alternatives based solely on the merits of that analysis. In cross-country petroleum pipeline project selection, market analysis determines throughput requirement and supply and demand points. Technical analysis identifies technological options and alternatives for pipe-line routes. Economic and financial analysis derive the least-cost option. The impact assessment addresses environmental issues. The impact assessment often suggests alternative sites, routes, technologies, and/or implementation methodology, necessitating revision of technical and financial analysis. This report suggests an integrated approach to feasibility analysis presented as a case application of a cross-country petroleum pipeline project in India.

A prediction of outcomes: a psychological investigation into cognitive and affective development within the framework of adult literacy provision

This investigation seeks to explore the hypothesis, derived from observation and practice, that there is a strong relationship between the development of literacy skills and the growth of confidence in adult literacy students. Implicit in the developmental approach is the notion of progression towards some cognitive goal. Such a goal necessitates the establishment of a base line of existing attainment, together with subsequent assessment so that progress and development can be measured. The study includes an evaluation of existing formal and informal methods of initial and subsequent assessment and diagnosis available at the time for Adult Literacy Scheme Co-ordinators. Underlying the funding by Cheshire County Council for the project is the assumption that the results will be available for all practitioners and that the tools of measurement may be used by other Adult Literacy Co-ordinators in the County. It is intended, therefore, that this research should result in practical outcomes in which methods of assessment will involve active participation by students as well as by tutors, becoming part of the learning process. It is hypothesised that this kind of co-operation could lead ultimately to self-directed learning and student-independence. For the purposes of this research, a balance is attempted in the use of assessment tools, between standardised tests and informal methods. The study provides facts about students! reading habits; as well as their reading levels, their spelling levels, their handwriting, their writing skills and their writing habits. The study seeks to show the students' feelings towards education, their educational attainments and the type of school which they attended. The study also attempts to come to some measurement of those aspects of student personality which relate to confidence, by means of tests and questionnaires. The study concludes with an examination of the link between cognitive and affective progress.

Cost and time control of construction project: inhibiting factors and mitigating measures in practice

Despite the availability of various control techniques and project control software many construction projects still do not achieve their cost and time objectives. Research in this area so far has mainly been devoted to identifying causes of cost and time overruns. There is limited research geared towards studying factors inhibiting the ability of practitioners to effectively control their projects. To fill this gap, a survey was conducted on 250 construction project organizations in the UK, which was followed by face-to-face interviews with experienced practitioners from 15 of these organizations. The common factors that inhibit both time and cost control during construction projects were first identified. Subsequently 90 mitigating measures have been developed for the top five leading inhibiting factors—design changes, risks/uncertainties, inaccurate evaluation of project time/duration, complexities and non-performance of subcontractors were recommended. These mitigating measures were classified as: preventive, predictive, corrective and organizational measures. They can be used as a checklist of good practice and help project managers to improve the effectiveness of control of their projects.

Community accessibility of health information and the consequent impact for translation into community languages

This paper reports on a research project that investigated the accessibility of health information and the consequent impact for translation into community languages. This is a critical aspect of the mediation of intercultural and interlingual communication in the domain of public health information and yet very little research has been undertaken to address such issues. The project was carried out in collaboration with the New South Wales Multicultural Health Communication Service (MHCS), which provides advice and services to state-based health professionals aiming to communicate with non-English speaking communities. The research employed a mixed-method and action research based approach involving two phases. The primary focus of this paper is to discuss major quantitative findings from the first pilot phase, which indicated that there is much room to improve the way in which health information is written in English for effective community-wide communication within a multilingual society.

Challenges and emerging solutions in the development of compressed orally disintegrating tablets

Areas covered: The review discusses the main challenges of ODT manufacturing process and the emerging solutions featured at early drug development stages. The research specifically describes the methods reported for taste masking/assessment and solubilisation of unpalatable and poorly soluble drugs, respectively. Furthermore, this review highlights the techniques used for developing modified-release ODTs, an emerging area in the field. In addition, it also discusses the poor flowability and segregation problems of directly compressed powders. Moreover, the review describes the tests reported in the literature for ODT disintegration time assessment since a universal technique is still non-existent. Expert opinion: The approaches used to overcome the manufacturing challenges often have a bearing on the price of the end product. However, despite the technical and regulatory challenges, ODTs can offer many advantages over the conventional dosage forms if accompanied by suitable adjuvant technologies and in vitro analytical tools. © 2014 Informa UK, Ltd. Introduction: Orally disintegrating tablets (ODTs) provide several advantages over conventional tablets such as suitability for patients with swallowing difficulties and faster onset of action. The manufacture of ODTs by compression/tableting offers a practical and cost-effective strategy over the freeze drying (lyophilisation) method. Nonetheless, the FDA recommends a disintegration time of 30 s and a maximum weight of 500 mg for a tablet to be labelled as an ODT. These requirements, alongside other desirable product properties, have created a number of challenges for the formulator to overcome while developing compressed ODTs.

Impacts of flooding on SMEs and their relevance to chartered surveyors:

This is the final report of the RICS Education Trust funded “Developing Flood Expert Knowledge in Chartered Surveyors – DEFENCES” research project. The UK has endured a number of major flood events in recent years, and the UK Environment Agency (2009a) identified that about 5.2million properties in England, amounting to one in six, are at risk of flooding. The impacts of flooding include direct and indirect impacts and can be particularly devastating for small and medium-sized enterprises (SMEs) who are generally more vulnerable to such events than larger business organisations. Recent flood events have established how costly flooding can be to the SME sector (Pitt, 2008, ABI, 2010), which has given greater impetus to the need to improve the resilience of at-risk SMEs. A lack of professional advice on flood protection and adaptation measures represents a potential barrier to the uptake of such interventions by SMEs. A recent Royal Institution of Chartered Surveyors (RICS) survey, as quoted in Defra (2008) notes that, although a majority of chartered surveyors would like to work in this area of practice (flood risk assessment and adaptation), they are conscious of gaps in their competency, knowledge and understanding. The research project sought to contextualise this broader issue and investigate how chartered surveyors can bridge the gap in providing professional flood advice to SMEs. Further, a shift in the UK government policy on flood risk management is evident, where at-risk communities are urged to adapt to flooding. This places greater emphasis on property-level flood adaptation, providing further impetus for Chartered Surveyors to be involved. Findings of the research will be of interest to the RICS, the RICS Flood steering Group, practicing surveyors generally, SMEs, business support and policy making organisations.