The case for aluminium as the neurotoxin in sporadic Alzheimer's disease

The flash-pattern evoked potential difference (F - P) in man increases with age (93 subjects), correlates with decreasing cognitive ability and when it exceeds a unique critical level the subject is clinically diagnosed as having Alzheimer's disease. Aluminium accumulates in the human brain with age, increases the F - P value close to the critical value in a dose dependent manner, and at such a rate that normal environmental exposure to aluminium accounts for all or nearly all the F - P increases in man. Aluminium neurotoxicity is therefore a major cause of sporadic Alzheimer's disease.

Cleavage initiation in the intercritically reheated coarse-grained heat affected zone:Part II. Failure criteria and statistical effects

In part 1 of this article, cleavage initiation in the intercritically reheated coarse-grained heat affected zone (IC CG HAZ) of high-strength low-alloy (HSLA) steels was determined to occur between two closely spaced blocky MA particles. Blunt notch, crack tip opening displacement (CTOD), and precracked Charpy testing were used in this investigation to determine the failure criteria required for cleavage initiation to occur by this mechanism in the IC CG HAZ. It was found that the attainment of a critical level of strain was required in addition to a critical level of stress. This does not occur in the case of high strain rate testing, for example, during precracked Charpy testing. A different cleavage initiation mechanism is then found to operate. The precise fracture criteria and microstructural requirements (described in part I of this article) result in competition between potential cleavage initiation mechanisms in the IC CG HAZ.

Self-organization in social tagging systems

Individuals often imitate each other to fall into the typical group, leading to a self-organized state of typical behaviors in a community. In this paper, we model self-organization in social tagging systems and illustrate the underlying interaction and dynamics. Specifically, we introduce a model in which individuals adjust their own tagging tendency to imitate the average tagging tendency. We found that when users are of low confidence, they tend to imitate others and lead to a self-organized state with active tagging. On the other hand, when users are of high confidence and are stubborn to change, tagging becomes inactive. We observe a phase transition at a critical level of user confidence when the system changes from one regime to the other. The distributions of post length obtained from the model are compared to real data, which show good agreement. © 2011 American Physical Society.

Critical noise levels for LDPC decoding

We determine the critical noise level for decoding low density parity check error correcting codes based on the magnetization enumerator , rather than on the weight enumerator employed in the information theory literature. The interpretation of our method is appealingly simple, and the relation between the different decoding schemes such as typical pairs decoding, MAP, and finite temperature decoding (MPM) becomes clear. In addition, our analysis provides an explanation for the difference in performance between MN and Gallager codes. Our results are more optimistic than those derived via the methods of information theory and are in excellent agreement with recent results from another statistical physics approach.

Public health and pharmacy:A critical review

Community pharmacy in the UK is often described as the most accessible of all primary healthcare providers, situated on the 'high street' and requiring no appointment. But what does the new public health movement mean for pharmacy, and where is pharmacy in terms of the new public health agenda? In this paper, the authors provide a critical assessment of pharmacy's response to this agenda through a review of key pharmacy relevant policy documents. In particular, in the context of pharmacy's re-professionalization agenda, they assess the contribution of pharmacy to public health from a micro- and macro-level framework. The aim is to provide a critical context in light of current proposals for the profession to develop a public health strategy.

Selling, resistance and reconciliation:a critical discursive approach to subsidiary role evolution in MNEs

Studies of political dynamics between multinational enterprise (MNE) parents and subsidiaries during subsidiary role evolution have focused largely on control and resistance. This paper adopts a critical discursive approach to enable an exploration of subtle dynamics in the way that both headquarters and subsidiaries subjectively reconstruct their independent-interdependent relationships with each other during change. We draw from a real-time qualitative study of a revealing case of charter change in an important European subsidiary of an MNE attempting to build closer integration across European country operations. Our results illustrate the role of three discourses – selling, resistance and reconciliation – in the reconstruction of the subsidiary–parent relationship. From this analysis we develop a process framework that elucidates the important role of these three discourses in the reconstruction of subsidiary roles, showing how resistance is not simply subversive but an important part of integration. Our findings contribute to a better understanding of the micro-level political dynamics in subsidiary role evolution, and of how voice is exercised in MNEs. This study also provides a rare example of discourse-based analysis in an MNE context, advancing our knowledge of how discursive methods can help to advance international business research more generally.

Police interviews with women reporting rape: a critical discourse analysis

This study investigates the discursive patterns of interactions between police interviewers and women reporting rape in significant witness interviews. Data in the form of video recorded interviews were obtained from a UK police force for the purposes of this study. The data are analysed using a multi-method approach, incorporating tools from micro-sociology, Conversation Analysis and Discursive Psychology, to reveal patterns of interactional control, negotiation, and interpretation. The study adopts a critical approach, which is to say that as well as describing discursive patterns, it explains them in light of the discourse processes involved in the production and consumption of police interview talk, and comments on the relationship between these discourse processes and the social context in which they occur. A central focus of the study is how interviewers draw on particular interactional resources to shape interviewees? accounts in particular ways, and this is discussed in relation to the institutional role of the significant witness interview. The discussion is also extended to the ways in which mainstream rape ideology is both reflected in, and maintained by, the discursive choices of participants. The findings of this study indicate that there are a number of issues to be addressed in terms of the training currently offered to officers at Level 2 of the Professionalising Investigation Programme (PIP) (NPIA, 2009) who intend to conduct significant witness interviews. Furthermore, a need is identified to bring the linguistic and discursive processes of negotiation and transformation identified by the study to the attention of the justice system as a whole. This is a particularly pressing need in light of judicial reluctance to replace written witness statements, the current „end product? of significant witness interviews, with the video recorded interview in place of direct examination in cases of rape.

Meta level component-based framework for distributed computing applications

Adaptability for distributed object-oriented enterprise frameworks is a critical mission for system evolution. Today, building adaptive services is a complex task due to lack of adequate framework support in the distributed computing environment. In this thesis, we propose a Meta Level Component-Based Framework (MELC) which uses distributed computing design patterns as components to develop an adaptable pattern-oriented framework for distributed computing applications. We describe our novel approach of combining a meta architecture with a pattern-oriented framework, resulting in an adaptable framework which provides a mechanism to facilitate system evolution. The critical nature of distributed technologies requires frameworks to be adaptable. Our framework employs a meta architecture. It supports dynamic adaptation of feasible design decisions in the framework design space by specifying and coordinating meta-objects that represent various aspects within the distributed environment. The meta architecture in MELC framework can provide the adaptability for system evolution. This approach resolves the problem of dynamic adaptation in the framework, which is encountered in most distributed applications. The concept of using a meta architecture to produce an adaptable pattern-oriented framework for distributed computing applications is new and has not previously been explored in research. As the framework is adaptable, the proposed architecture of the pattern-oriented framework has the abilities to dynamically adapt new design patterns to address technical system issues in the domain of distributed computing and they can be woven together to shape the framework in future. We show how MELC can be used effectively to enable dynamic component integration and to separate system functionality from business functionality. We demonstrate how MELC provides an adaptable and dynamic run time environment using our system configuration and management utility. We also highlight how MELC will impose significant adaptability in system evolution through a prototype E-Bookshop application to assemble its business functions with distributed computing components at the meta level in MELC architecture. Our performance tests show that MELC does not entail prohibitive performance tradeoffs. The work to develop the MELC framework for distributed computing applications has emerged as a promising way to meet current and future challenges in the distributed environment.

Scenario planning at business unit level

The scenario planning literature is focused on corporate level interventions. There is a general consensus on the method, but there is little debate about the stages involved in building and using the scenarios. This article presents a case study of a scenario planning intervention, which was conducted at a business unit of the British division of one of the largest beauty and cosmetic products multinationals. The method adopted in this case study has some fundamental differences to the existing models used at corporate level. This research is based on the principles of autoethnography, since its purpose is to present self-critical reflections, enhanced by reflective and reflexive conversations on a scenario planning method used at business unit level. The critical reflections concern a series of critical incidents which distinguish this method from existing intuitive logic scenario planning models which are used at corporate level planning. Ultimately this article contributes to the scenario planning method literature by providing insights into its practice at business unit level. © 2012 Elsevier Ltd.

When does leverage hurt productivity growth? A firm-level analysis:a firm-level analysis

In the wake of the global financial crisis, several macroeconomic contributions have highlighted the risks of excessive credit expansion. In particular, too much finance can have a negative impact on growth. We examine the microeconomic foundations of this argument, positing a non-monotonic relationship between leverage and firm-level productivity growth in the spirit of the trade-off theory of capital structure. A threshold regression model estimated on a sample of Central and Eastern European countries confirms that TFP growth increases with leverage until the latter reaches a critical threshold beyond which leverage lowers TFP growth. This estimate can provide guidance to firms and policy makers on identifying "excessive" leverage. We find similar non-monotonic relationships between leverage and proxies for firm value. Our results are a first step in bridging the gap between the literature on optimal capital structure and the wider macro literature on the finance-growth nexus. © 2012 Elsevier Ltd.

Survival or success? A critical exploration of the use of 'double-voiced discourse' by women business leaders in the UK

This article considers whether using leadership language may be one under-explored reason why there continues to be a significant lack of women at executive level. Do women make less of a linguistic impact in the boardroom than men? By analysing linguistic data from senior management meetings and follow-up interviews in seven multinational UK companies, we suggest that senior women and men use a very similar range of linguistic strategies to lead their teams except in one key respect. Women appear to monitor and regulate their use of language more than men, adjusting what they say in the light of their colleagues’ concerns and agendas. This use of ‘double-voiced discourse’ (Bakhtin, 1994/1963) enables women to survive in a male-dominated business world, but this can sometimes make their voice ‘harder to hear’. However, double-voiced discourse is also a form of linguistic expertise and potentially might offer women leaders a strategy for success.

Critical noise levels for low-density parity check decoding

We determine the critical noise level for decoding low-density parity check error-correcting codes based on the magnetization enumerator (M), rather than on the weight enumerator (W) employed in the information theory literature. The interpretation of our method is appealingly simple, and the relation between the different decoding schemes such as typical pairs decoding, MAP, and finite temperature decoding (MPM) becomes clear. In addition, our analysis provides an explanation for the difference in performance between MN and Gallager codes. Our results are more optimistic than those derived using the methods of information theory and are in excellent agreement with recent results from another statistical physics approach.

An examination of the determinants of entrepreneurship at the regional level:the case of East Midlands region

Despite the importance of new firms to the economy, determinants of start-ups have mainly been examined at a country level and discussion of regional entrepreneurial activity has received less attention. Since there are significant variations in entrepreneurship rates across and within countries, such an investigation at a regional level would help in gaining an in depth understanding of the impact of the individual level resource endowments and neighbourhood characteristics on an individual’s decision to engage in entrepreneurial activity. The main aim of the thesis is to explore various theories of entrepreneurship and develop integrated frameworks for examining the determinants of entrepreneurial activity at a neighbourhood level in the East Midlands region in England. The specific objectives of the thesis are to examine how the individual level resources and the neighbourhood characteristics: (i) combine to influence an individual to engage in the different stages of the entrepreneurial process, (ii) influence natives and migrants to engage in start up activity and (iii) influence women and men to become self-employed and ambitious entrepreneurs. In terms of the methodology, the empirical analysis is based on two databases combined: 2006 to 2009 GEM East Midlands region and the English Index of Multiple Deprivation dataset. Based on the critical review of the literature on entrepreneurship the thesis develop theoretical frameworks which led to formulate hypotheses related to the differentiated impact of both individual and neighbourhood level factors on the propensity of an individual to be involved in entrepreneurial activity. The findings indicate that the determinants of entrepreneurial activity vary with human, financial and the local environment factors affecting the entrepreneurial process. Finally, the thesis calls for caution when developing and applying generic and specific policy measures aimed at promoting entry into entrepreneurship.

High performance liquid level monitoring system based on polymer fiber Bragg gratings embedded in silicone rubber diaphragm

Liquid-level sensing technologies have attracted great prominence, because such measurements are essential to industrial applications, such as fuel storage, flood warning and in the biochemical industry. Traditional liquid level sensors are based on electromechanical techniques; however they suffer from intrinsic safety concerns in explosive environments. In recent years, given that optical fiber sensors have lots of well-established advantages such as high accuracy, costeffectiveness, compact size, and ease of multiplexing, several optical fiber liquid level sensors have been investigated which are based on different operating principles such as side-polishing the cladding and a portion of core, using a spiral side-emitting optical fiber or using silica fiber gratings. The present work proposes a novel and highly sensitive liquid level sensor making use of polymer optical fiber Bragg gratings (POFBGs). The key elements of the system are a set of POFBGs embedded in silicone rubber diaphragms. This is a new development building on the idea of determining liquid level by measuring the pressure at the bottom of a liquid container, however it has a number of critical advantages. The system features several FBG-based pressure sensors as described above placed at different depths. Any sensor above the surface of the liquid will read the same ambient pressure. Sensors below the surface of the liquid will read pressures that increase linearly with depth. The position of the liquid surface can therefore be approximately identified as lying between the first sensor to read an above-ambient pressure and the next higher sensor. This level of precision would not in general be sufficient for most liquid level monitoring applications; however a much more precise determination of liquid level can be made by linear regression to the pressure readings from the sub-surface sensors. There are numerous advantages to this multi-sensor approach. First, the use of linear regression using multiple sensors is inherently more accurate than using a single pressure reading to estimate depth. Second, common mode temperature induced wavelength shifts in the individual sensors are automatically compensated. Thirdly, temperature induced changes in the sensor pressure sensitivity are also compensated. Fourthly, the approach provides the possibility to detect and compensate for malfunctioning sensors. Finally, the system is immune to changes in the density of the monitored fluid and even to changes in the effective force of gravity, as might be obtained in an aerospace application. The performance of an individual sensor was characterized and displays a sensitivity (54 pm/cm), enhanced by more than a factor of 2 when compared to a sensor head configuration based on a silica FBG published in the literature, resulting from the much lower elastic modulus of POF. Furthermore, the temperature/humidity behavior and measurement resolution were also studied in detail. The proposed configuration also displays a highly linear response, high resolution and good repeatability. The results suggest the new configuration can be a useful tool in many different applications, such as aircraft fuel monitoring, and biochemical and environmental sensing, where accuracy and stability are fundamental. © (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.

A comparative study to evaluate surface microbial contamination associated with copper-containing and stainless steel pens used by nurses in the critical care unit

A clinical study was undertaken to compare the surface microbial contamination associated with pens constructed of either a copper alloy or stainless steel used by nurses on intensive care units. A significantly lower level of microbial contamination was found on the copper alloy pens. Copyright © 2011 by the Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.