51 resultados para Verification and validation technology


Relevância:

100.00% 100.00%

Publicador:

Resumo:

Damage to insulation materials located near to a primary circuit coolant leak may compromise the operation of the emergency core cooling system (ECCS). Insulation material in the form of mineral wool fiber agglomerates (MWFA) maybe transported to the containment sump strainers, where they may block or penetrate the strainers. Though the impact of MWFA on the pressure drop across the strainers is minimal, corrosion products formed over time may also accumulate in the fiber cakes on the strainers, which can lead to a significant increase in the strainer pressure drop and result in cavitation in the ECCS. An experimental and theoretical study performed by the Helmholtz-Zentrum Dresden-Rossendorf and the Hochschule Zittau/Görlitz is investigating the phenomena that maybe observed in the containment vessel during a primary circuit coolant leak. The study entails the generation of fiber agglomerates, the determination of their transport properties in single and multi-effect experiments and the long-term effect that corrosion and erosion of the containment internals by the coolant has on the strainer pressure drop. The focus of this paper is on the verification and validation of numerical models that can predict the transport of MWFA. A number of pseudo-continuous dispersed phases of spherical wetted agglomerates represent the MWFA. The size, density, the relative viscosity of the fluid-fiber agglomerate mixture and the turbulent dispersion all affect how the fiber agglomerates are transported. In the cases described here, the size is kept constant while the density is modified. This definition affects both the terminal velocity and volume fraction of the dispersed phases. Note that the relative viscosity is only significant at high concentrations. Three single effect experiments were used to provide validation data on the transport of the fiber agglomerates under conditions of sedimentation in quiescent fluid, sedimentation in a horizontal flow and suspension in a horizontal flow. The experiments were performed in a rectangular column for the quiescent fluid and a racetrack type channel that provided a near uniform horizontal flow. The numerical models of sedimentation in the column and the racetrack channel found that the sedimentation characteristics are consistent with the experiments. For channel suspension, the heavier fibers tend to accumulate at the channel base even at high velocities, while lighter phases are more likely to be transported around the channel.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

A combination of the two-fluid and drift flux models have been used to model the transport of fibrous debris. This debris is generated during loss of coolant accidents in the primary circuit of pressurized or boiling water nuclear reactors, as high pressure steam or water jets can damage adjacent insulation materials including mineral wool blankets. Fibre agglomerates released from the mineral wools may reach the containment sump strainers, where they can accumulate and compromise the long-term operation of the emergency core cooling system. Single-effect experiments of sedimentation in a quiescent rectangular column and sedimentation in a horizontal flow are used to verify and validate this particular application of the multiphase numerical models. The utilization of both modeling approaches allows a number of pseudocontinuous dispersed phases of spherical wetted agglomerates to be modeled simultaneously. Key effects on the transport of the fibre agglomerates are particle size, density and turbulent dispersion, as well as the relative viscosity of the fluid-fibre mixture.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The verification and validation of engineering designs are of primary importance as they directly influence production performance and ultimately define product functionality and customer perception. Research in aspects of verification and validation is widely spread ranging from tools employed during the digital design phase, to methods deployed for prototype verification and validation. This paper reviews the standard definitions of verification and validation in the context of engineering design and progresses to provide a coherent analysis and classification of these activities from preliminary design, to design in the digital domain and the physical verification and validation of products and processes. The scope of the paper includes aspects of system design and demonstrates how complex products are validated in the context of their lifecycle. Industrial requirements are highlighted and research trends and priorities identified. © 2010 CIRP.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Efficient numerical models facilitate the study and design of solid oxide fuel cells (SOFCs), stacks, and systems. Whilst the accuracy and reliability of the computed results are usually sought by researchers, the corresponding modelling complexities could result in practical difficulties regarding the implementation flexibility and computational costs. The main objective of this article is to adapt a simple but viable numerical tool for evaluation of our experimental rig. Accordingly, a model for a multi-layer SOFC surrounded by a constant temperature furnace is presented, trained and validated against experimental data. The model consists of a four-layer structure including stand, two interconnects, and PEN (Positive electrode-Electrolyte-Negative electrode); each being approximated by a lumped parameter model. The heating process through the surrounding chamber is also considered. We used a set of V-I characteristics data for parameter adjustment followed by model verification against two independent sets of data. The model results show a good agreement with practical data, offering a significant improvement compared to reduced models in which the impact of external heat loss is neglected. Furthermore, thermal analysis for adiabatic and non-adiabatic process is carried out to capture the thermal behaviour of a single cell followed by a polarisation loss assessment. Finally, model-based design of experiment is demonstrated for a case study.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This paper investigates the simultaneous causal relationship between investments in information and communication technology (ICT) and flows of foreign direct investment (FDI), with reference to its implications on economic growth. For the empirical analysis we use data from 23 major countries with heterogeneous economic development for the period 1976-99. Our causality test results suggest that there is a causal relationship from ICT to FDI in developed countries, which means that a higher level of ICT investment leads to an increase inflow of FDI. ICT may contribute to economic growth indirectly by attracting more FDI. Contrarily, we could not find significant causality from ICT to FDI in developing countries. Instead, we have partial evidence of opposite causality relationship: the inflow of FDI causes further increases in ICT investment and production capacity. © United Nations University 2006.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

As information and communications technology (ICT) involves both traditional capital and knowledge capital, potential spillovers through various mechanisms can occur. Having tried to confirm the existence of ICT spillovers across country borders as Park et al. (Inf. Syst. Res., vol. 18, pp. 86-102, 2007), we investigate the patterns and mechanisms of international ICT spillovers. We use panel data on 37 countries from 1996 to 2004. We find that developing countries could reap more benefits from ICT spillovers than developed countries. We also find that the higher the Internet penetration rate in recipient countries, the more international ICT spillovers there might exist. Our findings are important for policy decisions regarding national trade liberalization and economic integration. Developing economies that are more open to foreign trade may have an economic advantage and may develop knowledge-intensive activities, which will lead to economic development in the long run.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Using panel data for 41 developed and developing countries over the period 1998-2004, this paper examines the links between ICT diffusion and human development. We conducted a panel regression analysis of the investments in healthcare, education and information and communication technology (ICT) against human development index (HDI). The results show that these variables can be used to predict HDI scores. In agreement with findings of previous research, it is clear from our analysis that the central focus on ICT as a solution for development will not bring the results that the promoters of ICT as an ‘engine of growth’ are expecting. It is unwise to disaggregate the issues of education and healthcare infrastructure from ICT infrastructure development. ICT policies should be integrated with other national policies in order to find a holistic and structural solution to development.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Our study investigated the impact of ICT expansion on economic freedom in the Middle East (Bahrain, Iran, Jordan, Kuwait, Lebanon, Oman, Qatar, Saudi Arabia, Syria, United Arab Emirates, and Yemen). Our empirical analysis used archival data from 1995 to 2005; it showed that ICT expansion in the Middle East has been effective both in bridging the digital divide and also in promoting economic freedom in a region that was vulnerable to political, social, and global conflict. However, differences between countries, such as the educational attainment of their citizens and institutional resistance to technology acceptance, both enhanced and restricted the relationship between ICT and economic freedom.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

CONTEXT: The homeless are a significant group within society, which is increasing in size. They have demonstrably greater physical and mental health needs than the housed, and yet often have difficulty accessing primary health care. Medical 'reluctance' to look after homeless people is increasingly suggested as part of the problem. Medical education may have a role in ameliorating this. OBJECTIVES: This paper reports on the development and validation of a questionnaire specifically developed to measure medical students' attitudes towards the homeless. METHOD AND RESULTS: The Attitudes Towards the Homeless Questionnaire, developed using the views of over 370 medical students, was shown to have a Pearson test-retest reliability correlation coefficient of 0.8 and a Cronbach's alpha coefficient of 0.74. CONCLUSIONS: The Attitudes Towards the Homeless Questionnaire appears to be a valid and reliable instrument, which can measure students' attitudes towards the homeless. It could be a useful tool in assessing the effectiveness of educational interventions.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Xerox Customer Engagement activity is informed by the "Go To Market" strategy, and "Intelligent Coverage" sales philosophy. The realisation of this philosophy necessitates a sophisticated level of Market Understanding, and the effective integration of the direct channels of Customer Engagement. Sophisticated Market Understanding requires the mapping and coding of the entire UK market at the DMU (Decision Making Unit) level, which in turn enables the creation of tailored coverage prescriptions. Effective Channel Integration is made possible by the organisation of Customer Engagement work according to a single, process defined structure: the Selling Process. Organising by process facilitates the discipline of Task Substitution, which leads logically to creation of Hybrid Selling models. Productive Customer Engagement requires Selling Process specialisation by industry sector, customer segment and product group. The research shows that Xerox's Market Database (MDB) plays a central role in delivering the Go To Market strategic aims. It is a tool for knowledge based selling, enables productive SFA (Sales Force Automation) and, in sum, is critical to the efficient and effective deployment of Customer Engagement resources. Intelligent Coverage is not possible without the MDB. Analysis of the case evidence has resulted in the definition of 60 idiographic statements. These statements are about how Xerox organise and manage three direct channels of Customer Engagement: Face to Face, Telebusiness and Ebusiness. Xerox is shown to employ a process-oriented, IT-enabled, holistic approach to Customer Engagement productivity. The significance of the research is that it represents a detailed (perhaps unequalled) level of rich description of the interplay between IT and a holistic, process-oriented management philosophy.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The aim of this research is to assess the acquisition and absorption technology capabilities of the public sector in developing countries, with specific focus on the State of Kuwait. The assessment process of these two capabilities was conducted using a model originally designed for the private sector. In addition, the research aims to propose a framework to enhance the technological capability of developing countries, as well as the performance of the public sector. To achieve these aims, an investigation of the technology process to three public ministries in Kuwait was conducted. The prime interest of this investigation was to evaluate the role of the transferred technology in enhancing the indigenous technological capability of the public sector. The research is based on a case study approach, comprising a main case study (Ministry of Electricity and Water) and three minor case studies. Based on the outcomes from an extensive literature review and the preliminary sectoral visits, the research question and four hypotheses were formulated. These hypotheses were then tested using interview-based survey and documentation. The findings of the research revealed the weakness of the acquisition and absorption technological capabilities of the public sector. Consequently, the public sector relies extensively on foreign contractors and expatriates to compensate for this weakness. Also, it was found that Kuwait Government has not taken the necessary measures to develop its technological capability. This research has proposed a framework which could lead, if properly managed, to the enhancement of indigenous capability. It has also proposed how to improve performance and productivity in the public sector. Finally, the findings suggest that the assessment model, with minor adjustment, is applicable to the public sector.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The introduction of a micro-electronic based technology to the workplace has had a far reaching and widespread effect on the numbers and content of jobs. The importance of the implications of new technology were recognised by the trade unions, leading to a plethora of advice and literature in the late 70s and early 80s, notably the TUC 'Technology and Employment ' report. However, studies into the union response have consistently found an overall lack of influence by unions in the introduction of technology. Whilst the advent of new technology has coincided with an industrial relations climate of unprecedented hostility to union activity in the post-war period, there are structural weaknesses in unions in coming to terms with the process of technological change. In particular was the identification of a lack of suitable technological expertise. Addressing itself to this perceived weakness of the union response, this thesis is the outcome of a collaborative project between a national union and an academic institution. The thesis is based on detailed case studies concerning technology bargaining in the Civil Service and the response of the Civil and Public Services Associations (CPSA), the union that represents lower grade white collar civil servants. It is demonstrated that the application of expertise to union negotiators is insufficient on its own to extend union influence and that for unions to effectively come to terms with technology and influence its development requires a re-assessment across all spheres of union activity. It is suggested that this has repercussions for not only the internal organisation and quality of union policy formation and the extent, form and nature of collective bargaining with employer representatives, but also in the relationship with consumer and interest groups outside the traditional collective bargaining forum. Three policy options are developed in the thesis with the 'adversarial' and 'co~operative' options representing the more traditional reactive and passive forms of involvement. These are contrasted with an 'independent participative' form of involvement which was a 'pro-active' policy option and utilised the expertise of the Author in the CPSA's response to technological change.

Relevância:

100.00% 100.00%

Publicador:

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Over the years several articles have tracked the impact of technology on various aspects of the sales domain. However, the advent of social media and technologies related to social media has gone largely unnoticed in the literature. This article first provides brief attention to changing aspects of technology within the sales environment, leading to the identification of social media as a dominant new selling tool. A qualitative approach (focus groups) is employed to explore the breadth of current technology usage by sales managers and salespeople. Analysis of the data, collected in the United States and the United Kingdom, reveals six major themes: connectivity, relationships, selling tools, generational, global, and sales/marketing interface. Results provide evidence of a revolution in the buyer-seller relationship that includes some unanticipated consequences both for sales organization performance and needed future research contributions.