Understanding the role of self-identity in habitual risky behaviours: pedestrian road-crossing decisions across the lifespan

Self-identity as a careful pedestrian has not been fully considered in previous work on predicting intention to cross the road, or actual crossing behaviour, in non-optimal situations. Evidence suggests that self-identity may be a better predictor than attitudes in situations where decision-making styles have become habitual ways to respond. This study compared contributions of self-identity and attitudes to the prediction of intentions in two situations differing in level of habitual crossing expectation, and to crossing behaviour. Three hundred and sixty-two adults (17–92 years) completed a questionnaire measuring self-identity, attitudes, intentions, experience, social identity variables (e.g. age, gender) and personal limitations (mobility). Two hundred and five participants also completed a road-crossing simulation. Self-identity and attitude were both shown as significant independent predictors of intention in both situations. However, self-identity was less effective as a predictor in the higher risk scenario, where intention to perform the behaviour was lower, and for participants aged >75 years who had lower intention across scenarios. Self-identity strongly predicted intention to cross, which in turn predicted behaviour, but self-identity did not directly predict behaviour. Self-identity was strongly predicted by age. Implications for theories of compensation in older age and for design and targeting of pedestrian safety education are discussed.

A study of the relationship between employee participation and safety performance within an industrial organisation

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Employment outcomes and plant closure in a post-industrial city:an analysis of the labour market studies of MG Rover workers three years on

This paper examines how the loss of 6300 jobs from the closure of MG Rover (MGR) in the city of Birmingham (UK) in April 2005 affected the employment trajectories of ex-workers, in the context of wider structural change and efforts at urban renewal. The paper presents an analysis of a longitudinal survey of 300 ex-MGR workers, and examines to what extent the state of local labour markets and workers’ geographical mobility—as well as the effectiveness of the immediate policy response and longer-term local economic strategies—may have helped to balance the impacts of personal attributes associated with workers’ employability and their reabsorption into the labour markets. It is found that the relative buoyancy of the local economy, the success of longer-run efforts at diversification and a strong policy response and retraining initiative helped many disadvantaged workers to find new jobs in the medium term. However, the paper also highlights the unequal employment outcomes and trajectories that many lesser-skilled workers faced. It explores the policy issues arising from such closures and their aftermath, such as the need to co-ordinate responses, to retain institutional capacity, to offer high-quality training and education resources to workers and, where possible, to slow down such closure processes to enable skills to be retained and reused within the local economy.

Relationships, variety & synergy:the vital ingredients for scholarship in engineering education? A case study

This paper begins with the argument that within modern-day society, engineering has shifted from being the scientific and technical mainstay of industrial, and more recently digital change to become the most vital driver of future advancement. In order to meet the inevitable challenges resulting from this role, the nature of engineering education is constantly evolving and as such engineering education has to change. The paper argues that what is needed is a fresh approach to engineering education – one that is sufficiently flexible so as to capture the fast-changing needs of engineering education as a discipline, whilst being pedagogically suitable for use with a range of engineering epistemologies. It provides an overview of a case study in which a new approach to engineering education has been developed and evaluated. The approach, which is based on the concept of scholarship, is described in detail. This is followed by a discussion of how the approach has been put into practice and evaluated. The paper concludes by arguing that within today's market-driven university world, the need for effective learning and teaching practice, based in good scholarship, is fundamental to student success.

The growth and awareness of health and safety at work, 1780-1900

This thesis examines the growth and awareness of health and safety at work between 1780 and 1900. In this period the hazards at work were increased by the intensification of production brought about by the Industrial Revolution, and new risks to health arose from the wider range of toxic substances in use by manufacturing industry. There is discussion in the thesis of the extent to which the problems were identified in an age of short life expectancy and limited medical knowledge. The sources studied have been largely medical, governmental, trade and press reports. The emphasis is on the first effects seen and recommendations made, and where possible, the extent of the problem and the effectiveness of any preventative measures adopted and examined. There is discussion of the growing involvement of the Government in industrial health and safety. The subject is viewed in the light of modern thinking on industrial health but uses a classification appropriate to historical resources. Psychological and minor afflictions, neglected in the 19th century, are not considered. The available literature is reviewed in each section. Three detailed case studies conclude the thesis, two on the notoriously dangerous occupations of metal grinding and pottery, and one on occupational eye injuries. Each study is based on a different type of source material. The thesis overall shows that there was extensive concern for health and safety at work, but no systematic approach and only ad hoc implementation of preventative measures; and that the rate at which conditions improved varied between different industries and different categories of workers . However, some modern principles of health and safety at work can be seen emerging, and the period laid the necessary medical, technical and legal foundations for developments in the present century.

Hearing protectors: a dilemma involving acoustics and personal safety

This thesis is concerned with the optimising of hearing protector selection. A computer model was used to estimate the reduction in noise exposure and risk of occupational deafness provided by the wearing of hearing protectors in industrial noise spectra. The model was used to show that low attenuation hearing protectors con provide greater protection than high attenuation protectors if the high attenuation protectors ore not worn for the total duration of noise exposure; or not used by a small proportion of the population. The model was also used to show that high attenuation protectors will not necessarily provide significantly greater reduction in risk than low attenuation protectors if the population has been exposed to the noise for many years prior to the provision of hearing protectors. The effects of earplugs and earmuffs on the localisation of sounds were studied to determine whether high attenuation earmuffs are likely to have greater potential than the lower attenuation earplugs for affecting personal safety. Laboratory studies and experiments at a foundry with normal-hearing office employees and noise-exposed foundrymen who had some experience of wearing hearing protectors showed that although earplugs reduced the ability of the wearer to determine the direction of warning sounds, earmuffs produced more total angular error and more confusions between left and right. !t is concluded from the research findings that the key to the selection of hearing protectors is to be found in the provision of hearing protectors that can be worn for a very high percentage of the exposure time by a high percentage of the exposed population with the minimum effect on the personal safety of the wearers - the attenuation provided by the protection should be adequate but not a maximum value.

Self-regulation of health and safety in a Local Authority with particular reference to safety representatives, supervisors and safety committees

The Report of the Robens Committee (1972), the Health and Safety at Work Act (1974) and the Safety Representatives and Safety Committees Regulations (1977) provide the framework within which this study of certain aspects of health and safety is carried out. The philosophy of self-regulation is considered and its development is set within an historical and an industrial relations perspective. The research uses a case study approach to examine the effectiveness of self-regulation in health and safety in a public sector organisation. Within this approach, methodological triangulation employs the techniques of interviews, questionnaires, observation and documentary analysis. The work is based in four departments of a Scottish Local Authority and particular attention is given to three of the main 'agents' of self-regulation - safety representatives, supervisors and safety committees and their interactions, strategies and effectiveness. A behavioural approach is taken in considering the attitudes, values, motives and interactions of safety representatives and management. Major internal and external factors, which interact and which influence the effectiveness of joint self-regulation of health and safety, are identified. It is emphasised that an organisation cannot be studied without consideration of the context within which it operates both locally and in the wider environment. One of these factors, organisational structure, is described as bureaucratic and the model of a Representative Bureaucracy described by Gouldner (1954) is compared with findings from the present study. An attempt is made to ascertain how closely the Local Authority fits Gouldner's model. This research contributes both to knowledge and to theory in the subject area by providing an in-depth study of self-regulation in a public sector organisation, which when compared with such studies as those of Beaumont (1980, 1981, 1982) highlights some of the differences between the public and private sectors. Both empirical data and hypothetical models are used to provide description and explanation of the operation of the health and safety system in the Local Authority. As data were collected during a dynamic period in economic, political and social terms, the research discusses some of the effects of the current economic recession upon safety organisation.

Logics, thresholds, strategic power, and the promotion of liberalisation by governments: a case study from British Higher Education

Liberalisation has become an increasingly important policy trend, both in the private and public sectors of advanced industrial economies. This article eschews deterministic accounts of liberalisation by considering why government attempts to institute competition may be successful in some cases and not others. It considers the relative strength of explanations focusing on the institutional context, and on the volume and power of sectoral actors supporting liberalisation. These approaches are applied to two attempts to liberalise, one successful and one unsuccessful, within one sector in one nation – higher education in Britain. Each explanation is seen to have some explanatory power, but none is sufficient to explain why competition was generalised in the one case and not the other. The article counsels the need for scholars of liberalisation to be open to multiple explanations which may require the marshalling of multiple sources and types of evidence.

Experiences on dynamic simulation software in chemical engineering education

Commercial process simulators are increasing interest in the chemical engineer education. In this paper, the use of commercial dynamic simulation software, D-SPICE® and K-Spice®, for three different chemical engineering courses is described and discussed. The courses cover the following topics: basic chemical engineering, operability and safety analysis and process control. User experiences from both teachers and students are presented. The benefits of dynamic simulation as an additional teaching tool are discussed and summarized. The experiences confirm that commercial dynamic simulators provide realistic training and can be successfully integrated into undergraduate and graduate teaching, laboratory courses and research. © 2012 The Institution of Chemical Engineers.

Integrating service user and practitioner expertise within a web-based system for collaborative mental-health risk and safety management

Objectives: To develop a decision support system (DSS), myGRaCE, that integrates service user (SU) and practitioner expertise about mental health and associated risks of suicide, self-harm, harm to others, self-neglect, and vulnerability. The intention is to help SUs assess and manage their own mental health collaboratively with practitioners. Methods: An iterative process involving interviews, focus groups, and agile software development with 115 SUs, to elicit and implement myGRaCE requirements. Results: Findings highlight shared understanding of mental health risk between SUs and practitioners that can be integrated within a single model. However, important differences were revealed in SUs' preferred process of assessing risks and safety, which are reflected in the distinctive interface, navigation, tool functionality and language developed for myGRaCE. A challenge was how to provide flexible access without overwhelming and confusing users. Conclusion: The methods show that practitioner expertise can be reformulated in a format that simultaneously captures SU expertise, to provide a tool highly valued by SUs. A stepped process adds necessary structure to the assessment, each step with its own feedback and guidance. Practice Implications: The GRiST web-based DSS (www.egrist.org) links and integrates myGRaCE self-assessments with GRiST practitioner assessments for supporting collaborative and self-managed healthcare.

Practice based learning approaches in collaborative design and engineering education:a case study investigation into the benefits of a crossdisciplinary practice based learning strategy

This study explores the ongoing pedagogical development of a number of undergraduate design and engineering programmes in the United Kingdom. Observations and data have been collected over several cohorts to bring a valuable perspective to the approaches piloted across two similar university departments while trialling a number of innovative learning strategies. In addition to the concurrent institutional studies the work explores curriculum design that applies the principles of Co-Design, multidisciplinary and trans disciplinary learning, with both engineering and product design students working alongside each other through a practical problem solving learning approach known as the CDIO learning initiative (Conceive, Design Implement and Operate) [1]. The study builds on previous work presented at the 2010 EPDE conference: The Effect of Personality on the Design Team: Lessons from Industry for Design Education [2]. The subsequent work presented in this paper applies the findings to mixed design and engineering team based learning, building on the insight gained through a number of industrial process case studies carried out in current design practice. Developments in delivery also aligning the CDIO principles of learning through doing into a practice based, collaborative learning experience and include elements of the TRIZ creative problem solving technique [3]. The paper will outline case studies involving a number of mixed engineering and design student projects that highlight the CDIO principles, combined with an external industrial design brief. It will compare and contrast the learning experience with that of a KTP derived student project, to examine an industry based model for student projects. In addition key areas of best practice will be presented, and student work from each mode will be discussed at the conference.

Lecturers' experiences of assessing generic skills in an active learning environment for engineering education in Malaysia - Emergent findings

The aim of this paper is to explore the engineering lecturers' experiences of generic skills assessment within an active learning context in Malaysia. Using a case-study methodology, lecturers' assessment approaches were investigated regarding three generic skills; verbal communication, problem solving and team work. Because of the importance to learning of the assessment of such skills it is this assessment that is discussed. The findings show the lecturers' initial feedback to have been generally lacking in substance, since they have limited knowledge and experience of assessing generic skills. Typical barriers identified during the study included; generic skills not being well defined, inadequate alignment across the engineering curricula and teaching approaches, assessment practices that were too flexible, particular those to do with implementation; and a failure to keep up to date with industrial requirements. The emerging findings of the interviews reinforce the arguments that there is clearly much room for improvement in the present state of generic skills assessment.

How do engineering students develop practical competencies during a period of industrial placement? - Students' perceptions

This paper explores engineering students' perceptions of developing practical competencies as experienced in their industrial placements. In addition, it discusses the criticisms in the literature on Problem Based Learning, Project Based Learning and Conceive-Design-Implement-Operate in relation to the evaluation of effective learning and teaching during placements. The paper goes on to discuss a study which examines how undergraduate engineering students develop practical competencies during their industrial placements. A phenomenological research approach is adopted using in-depth interviews and document analysis. The research findings from this PhD study will contribute to the knowledge, theory and practice for the students, the industries and the institutions of higher education as students' practical competencies are developed and graduate employability rises. In conclusion, this study explores students' experiences of developing practical competencies during industrial placements. Hence, the study should be able to contribute to a set of evidence-based guidelines for higher education institutions and industry.

A European competence framework for industrial pharmacy practice in biotechnology

Project Report: The PHAR-IN ("Competences for industrial pharmacy practice in biotechnology") looked at whether there is a difference in how industrial employees and academics rank competences for practice in the biotechnological industry. A small expert panel consisting of the authors of this paper produced a biotechnology competence framework by drawing up an initial list of competences then ranking them in importance using a three-stage Delphi process. The framework was next evaluated and validated by a large expert panel of academics (n = 37) and industrial employees (n = 154). Results show that priorities for industrial employees and academics were similar. The competences for biotechnology practice that received the highest scores were mainly in: . "Research and Development", . "Upstream" and "Downstream" Processing', " . "Product development and formulation", " . "Aseptic processing", ."Analytical methodology", . "Product stability", and . "Regulation". The main area of disagreement was in the category "Ethics and drug safety" where academics ranked competences higher than did industrial employees.