Its in her eyes? A barometer for EU accession through female perceptions of role portrayals in advertising:a cross-cultural study of Ukraine and Turkey?

This article examines female response to gender role portrayals in advertising for Ukraine and Turkey. Being both new potential EU candidates, we argue that gender stereotype could also be used as a \u2018barometer\u2019 of progress and closure towards a more generally accepted EU behaviour against women. While their history remains different, both from a political and society values point of views, constraints are currently being faced that require convergence or justification of practices and understanding. Principal components analysis is employed over 290 questionnaires to identify the underlying dimensions. Results indicate overall similarities in perceptions, fragmentation within groups, but seem to provide divergence regarding thresholds.

Multinational enterprises and technological effort by local firms:a case study of the Malaysian electronics and electrical industry

It is often assumed that foreign MNEs are the driving force behind technological development in developing economies but it has become evident in recent years that the actions of MNEs in isolation from the domestic economy. The study, therefore, examines the determinants of local firms' decisions to undertake technological effort, not only in isolation, but also in the context of linkages between domestic firms and MNEs. There is evidence that linkages between MNEs and local firms are important in explaining technological effort by local firms but direct technological assistance from MNEs does not seem to play a major role in fostering increased technological effort by local firms.

Brand equity and purchase intention in fashion industry:a cross-cultural study in Asia and Europe

This research is the leading brand for purchase of assets, and analyzing the factors based on brand asset components and the relationship between the brand and brand assets assets impact factors and purchase intent on uncovering the relationship between components and trademarks centered on South Korea and the United Kingdom, by comparing the asset management plan would generate. The study, information navigation product knowledge affects of constant (+), brand attitudes and knowledge of the brand loyalty and brand value to the constant trademark (+). Brand value and brand loyalty and purchase intent-(+) in the United Kingdom, on the other hand, of the impact that do not affect that.

Biomass fuelled combined heat and power:situation in the UK and the Netherlands

Combined Heat and Power (CHP) is the simultaneous generation of usable heat and power in a single process. Despite its obvious advantages in terms of increased efficiency when compared to a single heat or power generation unit, there are a number of technical and economic reasons that have limited their selection. Biomass resources can be, and actually are used as fuel in CHP installations; however several hurdles have to be sorted beforehand, among the most important is the fact that biomass energy sources are not as energy intense as conventional CHP fuels. The ultimate outcome is a limited number of CHP units making use of biomass as fuel. Even fewer CHP units use bioliquids (e.g.: fast pyrolysis biomass liquids, biodiesel and vegetable oil). The Bioliquid-CHP project is carried out by a consortium of seven European and Russian complementary partners, funded by the EU and by the Federal Agency for Science and Innovation of the Russian Federation. The project aim is to develop microturbine and internal combustion engine adaptations in order to adjust these prime movers to bioliquids for CHP applications. This paper will show a summary of the current biomass CHP installations in the UK and the Netherlands, making reference to number of units, capacity, fuel used, the conversion technology involved and the preferred prime movers. The information will give an insight of the current market, with probable future trends and areas where growth could be expected. A similar paper describing the biomass CHP situation in Italy and Russia will be prepared in the near future.

Mobile phone and e-government in Turkey:practices and technological choices at the cross-road

Enhanced data services through mobile phones are expected to be soon fully transactional and embedded within future mobile consumption practices. While private services will surely continue to take the lead, others such as government and NGOs will become more prominent m-players. It is not yet sure which form of technological standards will take the lead including enhance SMS based operations or Internet based specifically developed mobile phone applications. With the introduction of interactive transactions via mobile phones, currently untapped segment of the populations (without computers) have the potential to be accessed. Our research, as a reflection of the current market situation in an emerging country context, in the case of mobile phones analyzes the current needs or emergence of dependencies regarding the use of m/e-government services from the perspective of municipality officers. We contend that more research is needed to understand current preparatory bottlenecks and front loading activities to be able to encourage future intention to use e-government services through mobile phone technologies. This study highlights and interprets the current emerging practices and praxis for consuming m-government services within government.

The EU's 'transnational power over' Central Asia:Developing and applying a structurally integrative approach to the study of the EU's power over Central Asia

This thesis challenges the consensual scholarly expectation of low EU impact in Central Asia. In particular, it claims that by focusing predominantly on narrow, micro-level factors, the prevailing theoretical perspectives risk overlooking less obvious aspects of the EU?s power, including structural aspects, and thus tend to underestimate the EU?s leverage in the region. Therefore, the thesis argues that a more structurally integrative and holistic approach is needed to understand the EU?s power in the region. In responding to this need, the thesis introduces a conceptual tool, which it terms „transnational power over? (TNPO). Inspired by debates in IPE, in particular new realist and critical IPE perspectives, and combining these views with insights from neorealist, neo-institutionalist and constructivist approaches to EU external relations, the concept of TNPO is an analytically eclectic notion, which helps to assess the degree to which, in today?s globalised and interdependent world, the EU?s power over third countries derives from its control over a combination of material, institutional and ideational structures, making it difficult for the EU?s partners to resist the EU?s initiatives or to reject its offers. In order to trace and assess the mechanisms of EU impact across these three structures, the thesis constructs a toolbox, which centres on four analytical distinctions: (i) EU-driven versus domestically driven mechanisms, (ii) mechanisms based on rationalist logics of action versus mechanisms following constructivist logics of action, (iii) agent-based versus purely structural mechanisms of TNPO, and (iv) transnational and intergovernmental mechanisms of EU impact. Using qualitative research methodology, the thesis then applies the conceptual model to the case of EU-Central Asia. It finds that the EU?s power over Central Asia effectively derives from its control over a combination of material, institutional and ideational structures, including its position as a leader in trade and investment in the region, its (geo)strategic and security-related capabilities vis-à-vis Central Asia, as well as the relatively dense level of institutionalisation of its relations with the five countries and the positive image of the EU in Central Asia as a more neutral actor.

Technology policy and technological innovation in the People's Republic of China

The objective of this research is to unveil the dynamics of technological innovation in planned economies in transition. It is proposed in the thesis that all innovation systems in the world, in fact, consist of certain configurations of market and hierarchy. These systems have always been shifting from one existing market-hierarchy mix to a new one, which is expected to be more conducive to technological innovation and economic development. Current reforms in many planned economies in transition reflect this theoretical proposition. A research framework is constructed to include three main dimensions for the study of a specific innovation system, i.e. Arrangements, Achievements and Actors. China, which has undergone reforms since 1978, is chosen as the empirical basis of the research. The research examined technology policy and technological innovation in China between 1978 to 1988. The thesis starts from Arrangements - R&D System in China and Its Reform. The thesis illustrates reforms in the R&D system in relation to government technology policy. There exist coherent government efforts to promote innovations through various plans, and the planning process incorporates both market and command elements. The institutional structure of Chinese R&D system remains still vertically departmentalised, but horizontal links are created through the market. Secondly, Achievements - Performance of Chinese R&D System is assessed through patterns of technological innovation. Data from National Awards for S&T Progress (1978-1988) are included in a substantial database, which is used to generate patterns of technological innovation and patterns of innovating organisations. These patterns were presented and interpreted in relation to geographical differences, sectoral differences, typological differences, forms of co-operation and the impacts of S&T policy and reform. The third dimension is study on Actors - Innovation in Applied R&D institutes. Through semi-structured interviews and questionnaire survey, internal structure and research management are analysed in the light of ongoing reforms. The reform of R&D funding system greatly affected the way applied R&D institutes operate. Both organisational and individual incentives for innovating are increasingly associated with economic or material benefits. The research suggests there is a need to put reforms in the R&D system into a wider societal and political context. Some general attributes of applied R&D institutes are also discussed in the thesis.

The factors affecting attitudes toward HSDPA service and intention to use:a cross-cultural comparison between Asia and Europe

HSDPA (High-Speed Downlink Packet Access) is a 3.5-generation asynchronous mobile communications service based on the third generation of W-CDMA. In Korea, it is mainly provided in through videophone service. Because of the diffusion of more powerful and diversified services, along with steep advances in mobile communications technology, consumers demand a wide range of choices. However, because of the variety of technologies, which tend to overflow the market regardless of consumer preferences, consumers feel increasingly confused. Therefore, we should not adopt strategies that focus only on developing new technology on the assumption that new technologies are next-generation projects. Instead, we should understand the process by which consumers accept new forms of technology and devise schemes to lower market entry barriers through strategies that enable developers to understand and provide what consumers really want.

Investigation of EDFA power transients in circuit-switched and packet-switched optical networks

Erbium-doped fibre amplifiers (EDFA’s) are a key technology for the design of all optical communication systems and networks. The superiority of EDFAs lies in their negligible intermodulation distortion across high speed multichannel signals, low intrinsic losses, slow gain dynamics, and gain in a wide range of optical wavelengths. Due to long lifetime in excited states, EDFAs do not oppose the effect of cross-gain saturation. The time characteristics of the gain saturation and recovery effects are between a few hundred microseconds and 10 milliseconds. However, in wavelength division multiplexed (WDM) optical networks with EDFAs, the number of channels traversing an EDFA can change due to the faulty link of the network or the system reconfiguration. It has been found that, due to the variation in channel number in the EDFAs chain, the output system powers of surviving channels can change in a very short time. Thus, the power transient is one of the problems deteriorating system performance. In this thesis, the transient phenomenon in wavelength routed WDM optical networks with EDFA chains was investigated. The task was performed using different input signal powers for circuit switched networks. A simulator for the EDFA gain dynamicmodel was developed to compute the magnitude and speed of the power transients in the non-self-saturated EDFA both single and chained. The dynamic model of the self-saturated EDFAs chain and its simulator were also developed to compute the magnitude and speed of the power transients and the Optical signal-to-noise ratio (OSNR). We found that the OSNR transient magnitude and speed are a function of both the output power transient and the number of EDFAs in the chain. The OSNR value predicts the level of the quality of service in the related network. It was found that the power transients for both self-saturated and non-self-saturated EDFAs are close in magnitude in the case of gain saturated EDFAs networks. Moreover, the cross-gain saturation also degrades the performance of the packet switching networks due to varying traffic characteristics. The magnitude and the speed of output power transients increase along the EDFAs chain. An investigation was done on the asynchronous transfer mode (ATM) or the WDM Internet protocol (WDM-IP) traffic networks using different traffic patterns based on the Pareto and Poisson distribution. The simulator is used to examine the amount and speed of the power transients in Pareto and Poisson distributed traffic at different bit rates, with specific focus on 2.5 Gb/s. It was found from numerical and statistical analysis that the power swing increases if the time interval of theburst-ON/burst-OFF is long in the packet bursts. This is because the gain dynamics is fast during strong signal pulse or with long duration pulses, which is due to the stimulatedemission avalanche depletion of the excited ions. Thus, an increase in output power levelcould lead to error burst which affects the system performance.

National system of innovation and technological learning:an integrated framework for understanding technological capability development in the Russian forestry sector

One of the issues in the innovation system literature is examination of technological learning strategies of laggard nations. Two distinct bodies of literature have contributed to our insight into forces driving learning and innovation, National Systems of Innovation (NSI) and technological learning literature. Although both literatures yield insights on catch-up strategies of 'latecomer' nations, the explanatory powers of each literature by itself is limited. In this paper, a possible way of linking the macro- and the micro-level approaches by incorporating enterprises as active learning entities into the learning and innovation system is proposed. The proposed model has been used to develop research hypotheses and indicate research directions and is relevant for investigating the learning strategies of firms in less technologically intensive industries outside East Asia.

Introduction : the role of quality, production and technological innovation in improving competitive performance

Quality, production and technological innovation management rank among the most important matters of concern to modern manufacturing organisations. They can provide companies with the decisive means of gaining a competitive advantage, especially within industries where there is an increasing similarity in product design and manufacturing processes. The papers in this special issue of International Journal of Technology Management have all been selected as examples of how aspects of quality, production and technological innovation can help to improve competitive performance. Most are based on presentations made at the UK Operations Management Association's Sixth International Conference held at Aston University at which the theme was 'Getting Ahead Through Technology and People'. At the conference itself over 80 papers were presented by authors from 15 countries around the world. Among the many topics addressed within the conference theme, technological innovation, quality and production management emerged as attracting the greatest concern and interest of delegates, particularly those from industry. For any new initiative to be implemented successfully, it should be led from the top of the organization. Achieving the desired level of commitment from top management can, however, be a difficulty. In the first paper of this issue, Mackness investigates this question by explaining how systems thinking can help. In the systems approach, properties such as 'emergence', 'hierarchy', 'commnication' and 'control' are used to assist top managers in preparing for change. Mackness's paper is then complemented by Iijima and Hasegawa's contribution in which they investigate the development of Quality Information Management (QIM) in Japan. They present the idea of a Design Review and demonstrate how it can be used to trace and reduce quality-related losses. The next paper on the subject of quality is by Whittle and colleagues. It relates to total quality and the process of culture change within organisations. Using the findings of investigations carried out in a number of case study companies, they describe four generic models which have been identified as characterising methods of implementing total quality within existing organisation cultures. Boaden and Dale's paper also relates to the management of quality, but looks specifically at the construction industry where it has been found there is still some confusion over the role of Quality Assurance (QA) and Total Quality Management (TQM). They describe the results of a questionnaire survey of forty companies in the industry and compare them to similar work carried out in other industries. Szakonyi's contribution then completes this group of papers which all relate specifically to the question of quality. His concern is with the two ways in which R&D or engineering managers can work on improving quality. The first is by improving it in the laboratory, while the second is by working with other functions to improve quality in the company. The next group of papers in this issue all address aspects of production management. Umeda's paper proposes a new manufacturing-oriented simulation package for production management which provides important information for both design and operation of manufacturing systems. A simulation for production strategy in a Computer Integrated Manufacturing (CIM) environment is also discussed. This paper is then followed by a contribution by Tanaka and colleagues in which they consider loading schedules for manufacturing orders in a Material Requirements Planning (MRP) environment. They compare mathematical programming with a knowledge-based approach, and comment on their relative effectiveness for different practical situations. Engstrom and Medbo's paper then looks at a particular aspect of production system design, namely the question of devising group working arrangements for assembly with new product structures. Using the case of a Swedish vehicle assembly plant where long cycle assembly work has been adopted, they advocate the use of a generally applicable product structure which can be adapted to suit individual local conditions. In the last paper of this particular group, Tay considers how automation has affected the production efficiency in Singapore. Using data from ten major industries he identifies several factors which are positively correlated with efficiency, with capital intensity being of greatest interest to policy makers. The two following papers examine the case of electronic data interchange (EDI) as a means of improving the efficiency and quality of trading relationships. Banerjee and Banerjee consider a particular approach to material provisioning for production systems using orderless inventory replenishment. Using the example of a single supplier and multiple buyers they develop an analytical model which is applicable for the exchange of information between trading partners using EDI. They conclude that EDI-based inventory control can be attractive from economic as well as other standpoints and that the approach is consistent with and can be instrumental in moving towards just-in-time (JIT) inventory management. Slacker's complementary viewpoint on EDI is from the perspective of the quality relation-ship between the customer and supplier. Based on the experience of Lucas, a supplier within the automotive industry, he concludes that both banks and trading companies must take responsibility for the development of payment mechanisms which satisfy the requirements of quality trading. The three final papers of this issue relate to technological innovation and are all country based. Berman and Khalil report on a survey of US technological effectiveness in the global economy. The importance of education is supported in their conclusions, although it remains unclear to what extent the US government can play a wider role in promoting technological innovation and new industries. The role of technology in national development is taken up by Martinsons and Valdemars who examine the case of the former Soviet Union. The failure to successfully infuse technology into Soviet enterprises is seen as a factor in that country's demise, and it is anticipated that the newly liberalised economies will be able to encourage greater technological creativity. This point is then taken up in Perminov's concluding paper which looks in detail at Russia. Here a similar analysis is made of the concluding paper which looks in detail at Russia. Here a similar analysis is made of the Soviet Union's technological decline, but a development strategy is also presented within the context of the change from a centralised to a free market economy. The papers included in this special issue of the International Journal of Technology Management each represent a unique and particular contribution to their own specific area of concern. Together, however, they also argue or demonstrate the general improvements in competitive performance that can be achieved through the application of modern principles and practice to the management of quality, production and technological innovation.

Classical and technological convergence:beyond the Solow-Swann model

Recent investigations into cross-country convergence follow Mankiw, Romer, and Weil (1992) in using a log-linear approximation to the Swan-Solow growth model to specify regressions. These studies tend to assume a common and exogenous technology. In contrast, the technology catch-up literature endogenises the growth of technology. The use of capital stock data renders the approximations and over-identification of the Mankiw model unnecessary and enables us, using dynamic panel estimation, to estimate the separate contributions of diminishing returns and technology transfer to the rate of conditional convergence. We find that both effects are important.

Wind power forecasts using Gaussian processes and numerical weather prediction

Since wind at the earth's surface has an intrinsically complex and stochastic nature, accurate wind power forecasts are necessary for the safe and economic use of wind energy. In this paper, we investigated a combination of numeric and probabilistic models: a Gaussian process (GP) combined with a numerical weather prediction (NWP) model was applied to wind-power forecasting up to one day ahead. First, the wind-speed data from NWP was corrected by a GP, then, as there is always a defined limit on power generated in a wind turbine due to the turbine controlling strategy, wind power forecasts were realized by modeling the relationship between the corrected wind speed and power output using a censored GP. To validate the proposed approach, three real-world datasets were used for model training and testing. The empirical results were compared with several classical wind forecast models, and based on the mean absolute error (MAE), the proposed model provides around 9% to 14% improvement in forecasting accuracy compared to an artificial neural network (ANN) model, and nearly 17% improvement on a third dataset which is from a newly-built wind farm for which there is a limited amount of training data. © 2013 IEEE.