94 resultados para Eco efficiency performance
Resumo:
Measuring variations in efficiency and its extension, eco-efficiency, during a restructuring period in different industries has always been a point of interest for regulators and policy makers. This paper assesses the impacts of restructuring of procurement in the Iranian power industry on the performance of power plants. We introduce a new slacks-based model for Malmquist-Luenberger (ML) Index measurement and apply it to the power plants to calculate the efficiency, eco-efficiency, and technological changes over the 8-year period (2003-2010) of restructuring in the power industry. The results reveal that although the restructuring had different effects on the individual power plants, the overall growth in the eco-efficiency of the sector was mainly due to advances in pure technology. We also assess the correlation between efficiency and eco-efficiency of the power plants, which indicates a close relationship between these two steps, thus lending support to the incorporation of environmental factors in efficiency analysis. © 2014 Elsevier Ltd.
Resumo:
Incorporating Material Balance Principle (MBP) in industrial and agricultural performance measurement systems with pollutant factors has been on the rise in recent years. Many conventional methods of performance measurement have proven incompatible with the material flow conditions. This study will address the issue of eco-efficiency measurement adjusted for pollution, taking into account materials flow conditions and the MBP requirements, in order to provide ‘real’ measures of performance that can serve as guides when making policies. We develop a new approach by integrating slacks-based measure to enhance the Malmquist Luenberger Index by a material balance condition that reflects the conservation of matter. This model is compared with a similar model, which incorporates MBP using the trade-off approach to measure productivity and eco-efficiency trends of power plants. Results reveal similar findings for both models substantiating robustness and applicability of the proposed model in this paper.
Resumo:
One of the main objectives in restructuring power industry is enhancing the efficiency of power facilities. However, power generation industry, which plays a key role in the power industry, has a noticeable share in emission amongst all other emission-generating sectors. In this study, we have developed some new Data Envelopment Analysis models to find efficient power plants based on less fuel consumption, combusting less polluting fuel types, and incorporating emission factors in order to measure the ecological efficiency trend. We then applied these models to measuring eco-efficiency during an eight-year period of power industry restructuring in Iran. Results reveal that there has been a significant improvement in eco-efficiency, cost efficiency and allocative efficiency of the power plants during the restructuring period. It is also shown that despite the hydro power plants look eco-efficient; the combined cycle ones have been more allocative efficient than the other power generation technologies used in Iran.
Resumo:
The European telecommunications sector is undergoing major structural change in the face of new technology, privatisation and European Commission directives requiring market liberalisation. This study considers the comparative performance of the major European telecommunications operators between 1978 and 1998. This period encompasses an era of state monopolies, market liberalisation initiatives and a number of privatisations. The objectives are to assess: the extent so far to which market liberalisation and privatisation have impacted on the efficiency with which telecommunications services are provided in Europe; and changes in the performance of the different telecommunications operators over time with a view to providing an insight into the comparative efficiency performance of the different telecommunications operators in Europe. Performance is measured in terms of profit margins and labour and total factor productivity.
Resumo:
In the European Retail Digest, Tenbusch (2002) advised us that, "over the last decade, only discounters have been able to achieve significant revenue growth". The most casual observer of the retail scene in Europe would quickly realise that the author was most certainly not writing about Britain. Indeed he compared the situation in Germany with Britain by noting that grocery prices in the former were on average 20% lower. Interestingly, it was, at least in part, just those types of price comparison data that sparked the current British debate on the state of our market for food shopping. Soon, however, there were other factors brought into consideration. Market power of supermarket/ superstore operators, prices offered to small local farmers, the apparent permanent global summertime for food, food miles and eco-efficiency all became part of the debate. What might be the competing influence of any or all of these factors in the name of better 'choice' for consumers? Are British consumers really being offered better choice compared to what was available in the early 1980s, and might that explain the price differential with Germany and other countries? Or are we simply not comparing like with like? Indeed, as we will shortly argue, can we generalise about Britain at all when we accept, for example, that the Scottish market IS different?
Resumo:
China has achieved significant progress in terms of economic and social developments since implementation of reform and open policy in 1978. However, the rapid speed of economic growth in China has also resulted in high energy consumption and serious environmental problems, which hindering the sustainability of China's economic growth. This paper provides a framework for measuring eco-efficiency with CO2 emissions in Chinese manufacturing industries. We introduce a global Malmquist-Luenberger productivity index (GMLPI) that can handle undesirable factors within Data Envelopment Analysis (DEA). This study suggested after regulations imposed by the Chinese government, in the last stage of the analysis, i.e. during 2011–2012, the contemporaneous frontier shifts towards the global technology frontier in the direction of more desirable outputs and less undesirable outputs, i.e. producing less CO2 emissions, but the GMLPI drops slightly. This is an indication that the Chinese government needs to implement more policy regulations in order to maintain productivity index while reducing CO2 emissions.
Resumo:
This paper analyses the mechanisms through which binding finance constraints can induce debt-constrained firms to improve technical efficiency to guarantee positive profits. This hypothesis is tested on a sample of firms belonging to the Italian manufacturing. Technical efficiency scores are computed by estimating parametric production frontiers using the one stage approach as in Battese and Coelli [Battese, G., Coelli, T., 1995. A model for technical efficiency effects in a stochastic frontier production function for panel data. Empirical Economics 20, 325-332]. The results support the hypothesis that a restriction in the availability of financial resources can affect positively efficiency. © 2004 Elsevier B.V. All rights reserved.
Resumo:
Guest editorial Ali Emrouznejad is a Senior Lecturer at the Aston Business School in Birmingham, UK. His areas of research interest include performance measurement and management, efficiency and productivity analysis as well as data mining. He has published widely in various international journals. He is an Associate Editor of IMA Journal of Management Mathematics and Guest Editor to several special issues of journals including Journal of Operational Research Society, Annals of Operations Research, Journal of Medical Systems, and International Journal of Energy Management Sector. He is in the editorial board of several international journals and co-founder of Performance Improvement Management Software. William Ho is a Senior Lecturer at the Aston University Business School. Before joining Aston in 2005, he had worked as a Research Associate in the Department of Industrial and Systems Engineering at the Hong Kong Polytechnic University. His research interests include supply chain management, production and operations management, and operations research. He has published extensively in various international journals like Computers & Operations Research, Engineering Applications of Artificial Intelligence, European Journal of Operational Research, Expert Systems with Applications, International Journal of Production Economics, International Journal of Production Research, Supply Chain Management: An International Journal, and so on. His first authored book was published in 2006. He is an Editorial Board member of the International Journal of Advanced Manufacturing Technology and an Associate Editor of the OR Insight Journal. Currently, he is a Scholar of the Advanced Institute of Management Research. Uses of frontier efficiency methodologies and multi-criteria decision making for performance measurement in the energy sector This special issue aims to focus on holistic, applied research on performance measurement in energy sector management and for publication of relevant applied research to bridge the gap between industry and academia. After a rigorous refereeing process, seven papers were included in this special issue. The volume opens with five data envelopment analysis (DEA)-based papers. Wu et al. apply the DEA-based Malmquist index to evaluate the changes in relative efficiency and the total factor productivity of coal-fired electricity generation of 30 Chinese administrative regions from 1999 to 2007. Factors considered in the model include fuel consumption, labor, capital, sulphur dioxide emissions, and electricity generated. The authors reveal that the east provinces were relatively and technically more efficient, whereas the west provinces had the highest growth rate in the period studied. Ioannis E. Tsolas applies the DEA approach to assess the performance of Greek fossil fuel-fired power stations taking undesirable outputs into consideration, such as carbon dioxide and sulphur dioxide emissions. In addition, the bootstrapping approach is deployed to address the uncertainty surrounding DEA point estimates, and provide bias-corrected estimations and confidence intervals for the point estimates. The author revealed from the sample that the non-lignite-fired stations are on an average more efficient than the lignite-fired stations. Maethee Mekaroonreung and Andrew L. Johnson compare the relative performance of three DEA-based measures, which estimate production frontiers and evaluate the relative efficiency of 113 US petroleum refineries while considering undesirable outputs. Three inputs (capital, energy consumption, and crude oil consumption), two desirable outputs (gasoline and distillate generation), and an undesirable output (toxic release) are considered in the DEA models. The authors discover that refineries in the Rocky Mountain region performed the best, and about 60 percent of oil refineries in the sample could improve their efficiencies further. H. Omrani, A. Azadeh, S. F. Ghaderi, and S. Abdollahzadeh presented an integrated approach, combining DEA, corrected ordinary least squares (COLS), and principal component analysis (PCA) methods, to calculate the relative efficiency scores of 26 Iranian electricity distribution units from 2003 to 2006. Specifically, both DEA and COLS are used to check three internal consistency conditions, whereas PCA is used to verify and validate the final ranking results of either DEA (consistency) or DEA-COLS (non-consistency). Three inputs (network length, transformer capacity, and number of employees) and two outputs (number of customers and total electricity sales) are considered in the model. Virendra Ajodhia applied three DEA-based models to evaluate the relative performance of 20 electricity distribution firms from the UK and the Netherlands. The first model is a traditional DEA model for analyzing cost-only efficiency. The second model includes (inverse) quality by modelling total customer minutes lost as an input data. The third model is based on the idea of using total social costs, including the firm’s private costs and the interruption costs incurred by consumers, as an input. Both energy-delivered and number of consumers are treated as the outputs in the models. After five DEA papers, Stelios Grafakos, Alexandros Flamos, Vlasis Oikonomou, and D. Zevgolis presented a multiple criteria analysis weighting approach to evaluate the energy and climate policy. The proposed approach is akin to the analytic hierarchy process, which consists of pairwise comparisons, consistency verification, and criteria prioritization. In the approach, stakeholders and experts in the energy policy field are incorporated in the evaluation process by providing an interactive mean with verbal, numerical, and visual representation of their preferences. A total of 14 evaluation criteria were considered and classified into four objectives, such as climate change mitigation, energy effectiveness, socioeconomic, and competitiveness and technology. Finally, Borge Hess applied the stochastic frontier analysis approach to analyze the impact of various business strategies, including acquisition, holding structures, and joint ventures, on a firm’s efficiency within a sample of 47 natural gas transmission pipelines in the USA from 1996 to 2005. The author finds that there were no significant changes in the firm’s efficiency by an acquisition, and there is a weak evidence for efficiency improvements caused by the new shareholder. Besides, the author discovers that parent companies appear not to influence a subsidiary’s efficiency positively. In addition, the analysis shows a negative impact of a joint venture on technical efficiency of the pipeline company. To conclude, we are grateful to all the authors for their contribution, and all the reviewers for their constructive comments, which made this special issue possible. We hope that this issue would contribute significantly to performance improvement of the energy sector.
Resumo:
We demonstrate a simple method to experimentally evaluate nonlinear transmission performance of high order modulation formats using a low number of channels and channel-like ASE. We verify it's behaviour is consistent with the AWGN model of transmission.
Resumo:
The influence of IT investment on hospital efficiency and quality are of great interest to healthcare executives as well as insurers. Few studies have examined how IT investments influence both efficiency and quality or whether there is an optimal IT investment level that influences both in the desired direction. Decision makers in healthcare wonder if there are tradeoffs between their pursuit of hospital operational efficiency and quality. Our study involving a 2-stage double bootstrap DEA analysis of 187 US hospitals over 2. years found direct effects of IT investment upon service quality and a moderating effect of quality upon operational efficiency. Further, our findings indicate a U-shaped relationship between IT investments and operational efficiency suggesting that IT investments have diminishing returns beyond a certain point.
Resumo:
thesis is developed from a real life application of performance evaluation of small and medium-sized enterprises (SMEs) in Vietnam. The thesis presents two main methodological developments on evaluation of dichotomous environment variable impacts on technical efficiency. Taking into account the selection bias the thesis proposes a revised frontier separation approach for the seminal Data Envelopment Analysis (DEA) model which was developed by Charnes, Cooper, and Rhodes (1981). The revised frontier separation approach is based on a nearest neighbour propensity score matching pairing treated SMEs with their counterfactuals on the propensity score. The thesis develops order-m frontier conditioning on propensity score from the conditional order-m approach proposed by Cazals, Florens, and Simar (2002), advocated by Daraio and Simar (2005). By this development, the thesis allows the application of the conditional order-m approach with a dichotomous environment variable taking into account the existence of the self-selection problem of impact evaluation. Monte Carlo style simulations have been built to examine the effectiveness of the aforementioned developments. Methodological developments of the thesis are applied in empirical studies to evaluate the impact of training programmes on the performance of food processing SMEs and the impact of exporting on technical efficiency of textile and garment SMEs of Vietnam. The analysis shows that training programmes have no significant impact on the technical efficiency of food processing SMEs. Moreover, the analysis confirms the conclusion of the export literature that exporters are self selected into the sector. The thesis finds no significant impact from exporting activities on technical efficiency of textile and garment SMEs. However, large bias has been eliminated by the proposed approach. Results of empirical studies contribute to the understanding of the impact of different environmental variables on the performance of SMEs. It helps policy makers to design proper policy supporting the development of Vietnamese SMEs.