It's what you do and the way that you do it:team task, team size, and innovation-related group processes

This article describes a study of the relationships between team inputs (task type and team size) and team processes in 87 cross industry Portuguese teams, some of which had high and some low requirements to innovate. Team processes were measured using the Team Climate Inventory (TCI), which focuses on clarity of and commitment to team objectives, levels of participation, support for innovation, and quality emphases. Three hypotheses were tested. The first proposed that teams carrying out tasks with a high innovation requirement would have high scores on a measure of team processes. This was supported insofar as such teams reported higher levels of participation and support for innovation. The second hypothesis proposed that large teams would have poorer team processes. This hypothesis was confirmed. The third hypothesis concerned the interaction between size and innovation. The results suggested that large teams operating under a relatively high pressure to innovate have poorer team processes than large teams that do not have a high requirement to innovate.

Product variety and just-in-time conflict and challenge

This paper addresses the question of how just-in-time can be implemented within high variety manufacture. To illustrate some of the principles in relation to the high variety-low volume situation the case of a computer manufacturer is considered in detail. For contrast the paper also considers the case of the manufacture of highly-configured four wheel drive vehicles where both variety and volumes are high. The most important issue in high variety/low volume production is that JIT operation should be seen in terms of the tactical holding of inventory in upstream buffers within the supply chain so that value is not added to work in progress prematurely. Tactical buffers ensure that service levels are maintained and the risk of stock-outs is minimized. In high variety/high volume production schedule integrity is the key factor, unreliable schedules being a major inhibitor to the introduction of JIT.

The DRAMA methodology for analysing strategy and its links with production system design

This paper describes a methodology: 'decision rules for analyzing manufacturing activities', which is designed to be a practical system of enquiry linking a strategic analysis to the design of production systems. The paper describes the development of the system, an industry specific design methodology, into DRAMA II which is a model that serves as an analytical tool for studying decision processes and implementation of production systems.

An application of decision process modelling to manufacturing system design

As levels of investment in advanced manufacturing systems increase, effective project management becomes ever more critical. This paper demonstrates how the model proposed by Mintzberg, Raisinghani and Theoret in 1976, which structures complicated strategic decision processes, can be applied to the design of new production systems for both descriptive and analytical research purposes. This paper sets a detailed case study concerning the design and development of an advanced manufacturing system within the Mintzberg decision model and so breaks down the decision sequence into constituent parts. It thus shows how a structured model can provide a framework for the researcher who wishes to study decision episodes in the design of manufacturing facilities in greater depth.

Innovation in teams : a qualitative and quantitative study of team behaviours

This thesis explores the processes of team innovation. It utilises two studies, an organisationally based pilot and an experimental study, to examine and identify aspects of teams' behaviours that are important for successful innovative outcome. The pilot study, based in two automotive manufacturers, involved the collection of team members' experiences through semi-structured interviews, and identified a number of factors that affected teams' innovative performance. These included: the application of ideative & dissemination processes; the importance of good team relationships, especially those of a more informal nature, in facilitating information and ideative processes; the role of external linkages in enhancing quality and radicality of innovations; and the potential attenuation of innovative ideas by time deadlines. This study revealed a number key team behaviours that may be important in successful innovation outcomes. These included; goal setting, idea generation and development, external contact, task and personal information exchange, leadership, positive feedback and resource deployment. These behaviours formed the basis of a coding system used in the second part of the research. Building on the results from the field based research, an experimental study was undertaken to examine the behavioural differences between three groups of sixteen teams undertaking innovative an task to produce an anti-drugs poster. They were randomly assigned to one of three innovation category conditions suggested by King and Anderson (1990), emergent, imported and imposed. These conditions determined the teams level of access to additional information on previously successful campaigns and the degree of freedom they had with regarding to the design of the poster. In addition, a further experimental condition was imposed on half of the teams per category which involved a formal time deadline for task completion. The teams were video taped for the duration of their innovation and their behaviours analysed and coded in five main aspects including; ideation, external focus, goal setting, interpersonal, directive and resource related activities. A panel of experts, utilising five scales developed from West and Anderson's (1996) innovation outcome measures, assessed the teams' outputs. ANOVAs and repeated measure ANOVAs were deployed to identify whether there were significant differences between the different conditions. The results indicated that there were some behavioural differences between the categories and that over the duration of the task behavioural changes were identified. The results, however, revealed a complex picture and suggested limited support for three distinctive innovation categories. There were many differences in behaviours, but rarely between more than two of the categories. A main finding was the impact that different levels of constraint had in changing teams' focus of attention. For example, emergent teams were found to use both their own team and external resources, whilst those who could import information about other successful campaigns were likely to concentrate outside the team and pay limited attention to the internal resources available within the team. In contrast, those operating under task constraints with aspects of the task imposed onto them were more likely to attend to internal team resources and pay limited attention to the external world. As indicated by the earlier field study, time deadlines did significantly change teams' behaviour, reducing ideative and information exchange behaviours. The model shows an important behavioural progression related to innovate teams. This progression involved the teams' openness initially to external sources, and then to the intra-team environment. Premature closure on the final idea before their mid-point was found to have a detrimental impact on team's innovation. Ideative behaviour per se was not significant for innovation outcome, instead the development of intra-team support and trust emerged as crucial. Analysis of variance revealed some limited differentiation between the behaviours of teams operating under the aforementioned three innovation categories. There were also distinct detrimental differences in the behaviour of those operating under a time deadline. Overall, the study identified the complex interrelationships of team behaviours and outcomes, and between teams and their context.

A Generic model for the design and analysis of production systems

This dissertation studies the process of operations systems design within the context of the manufacturing organization. Using the DRAMA (Design Routine for Adopting Modular Assembly) model as developed by a team from the IDOM Research Unit at Aston University as a starting point, the research employed empirically based fieldwork and a survey to investigate the process of production systems design and implementation within four UK manufacturing industries: electronics assembly, electrical engineering, mechanical engineering and carpet manufacturing. The intention was to validate the basic DRAMA model as a framework for research enquiry within the electronics industry, where the initial IDOM work was conducted, and then to test its generic applicability, further developing the model where appropriate, within the other industries selected. The thesis contains a review of production systems design theory and practice prior to presenting thirteen industrial case studies of production systems design from the four industry sectors. The results and analysis of the postal survey into production systems design are then presented. The strategic decisions of manufacturing and their relationship to production systems design, and the detailed process of production systems design and operation are then discussed. These analyses are used to develop the generic model of production systems design entitled DRAMA II (Decision Rules for Analysing Manufacturing Activities). The model contains three main constituent parts: the basic DRAMA model, the extended DRAMA II model showing the imperatives and relationships within the design process, and a benchmark generic approach for the design and analysis of each component in the design process. DRAMA II is primarily intended for use by researchers as an analytical framework of enquiry, but is also seen as having application for manufacturing practitioners.

Investigative framework for research into the design of manufacturing processes

This paper is based a major research project run by a team from the Innovation, Design and Operations Management Research Unit at the Aston Business School under SERC funding. International Computers Limited (!CL), the UK's largest indigenous manufacturer of mainframe computer products, was the main industrial collaborator in the research. During the period 1985-89 an integrated production system termed the "Modular Assembly Cascade'' was introduced to the Company's mainframe assembly plant at Ashton-under-Lyne near Manchester. Using a methodology primarily based upon 'participative observation', the researchers developed a model for analysing this manufacturing system design called "DRAMA". Following a critique of the existing literature on Manufacturing Strategy, this paper will describe the basic DRAMA model and its development from an industry specific design methodology to DRAMA II, a generic model for studying organizational decision processes in the design and implementation of production systems. From this, the potential contribution of the DRAMA model to the existing knowledge on the process of manufacturing system design will be apparent.

Market-driven strategies and the design of flexible production systems: evidence from the electronics industry

Links the concept of market-driven business strategies with the design of production systems. It draws upon the case of a firm which, during the last decade, changed its strategy from being “technology led” to “market driven”. The research, based on interdisciplinary fieldwork involving long-term participant observation, investigated the factors which contribute to the successful design and implementation of flexible production systems in electronics assembly. These investigations were conducted in collaboration with a major computer manufacturer, with other electronics firms being studied for comparison. The research identified a number of strategies and actions seen as crucial to the development of efficient flexible production systems, namely: effective integration of subsystems, development of appropriate controls and performance measures, compatibility between production system design and organization structure, and the development of a climate conducive to organizational change. Overall, the analysis suggests that in the electronics industry there exists an extremely high degree of environmental complexity and turbulence. This serves to shape the strategic, technical and social structures that are developed to match this complexity, examples of which are niche marketing, flexible manufacturing and employee harmonization.

System of integration of modularised assembly FMS

The modularised assembly FMS (Flexible Manufacturing System) cascade is a form of system design which, the authors feel, could be viable in a variety of organisational and operational settings where high product mix manufacture and unitary batch sizing are common features. The philosophy behind the concept is that production facilities are market-driven and customers' orders place a direct demand pull on final assembly which, in turn, triggers all preceeding activities. Greater flexibility~is recognized as a necessary feature in modern manufacture and the implementation of modularised FMS in conjunction with state-of-the-art hardware and computer software systems enable conditions under which more flexible processing can take place.

Effect of catechol derivatives on cell growth and lipoxygenase activity

Derivatives of salicylic acid have been synthesized as potential lipoxygenase inhibitors. Agents containing a phenolic dihydroxy moiety showed potent (IC 5010 -6-10 -7 M) inhibition of the growth of murine colonic tumour cells in vitro, and were effective inhibitors of 5-, 12- and 15-lipoxygenase in intact cells. The catechols were also potent inhibitors of rabbit reticulocyte 15-lipoxygenase (IC 50 ∼1 μM). © 2003 Elsevier Ltd. All rights reserved.