Species differential regulation of COX2 can be described by an NFκB-dependent logic AND gate

Cyclooxygenase 2 (COX2), a key regulatory enzyme of the prostaglandin/eicosanoid pathway, is an important target for anti-inflammatory therapy. It is highly induced by pro-inflammatory cytokines in a Nuclear factor kappa B (NFκB)-dependent manner. However, the mechanisms determining the amplitude and dynamics of this important pro-inflammatory event are poorly understood. Furthermore, there is significant difference between human and mouse COX2 expression in response to the inflammatory stimulus tumor necrosis factor alpha (TNFα). Here, we report the presence of a molecular logic AND gate composed of two NFκB response elements (NREs) which controls the expression of human COX2 in a switch-like manner. Combining quantitative kinetic modeling and thermostatistical analysis followed by experimental validation in iterative cycles, we show that the human COX2 expression machinery regulated by NFκB displays features of a logic AND gate. We propose that this provides a digital, noise-filtering mechanism for a tighter control of expression in response to TNFα, such that a threshold level of NFκB activation is required before the promoter becomes active and initiates transcription. This NFκB-regulated AND gate is absent in the mouse COX2 promoter, most likely contributing to its differential graded response in promoter activity and protein expression to TNFα. Our data suggest that the NFκB-regulated AND gate acts as a novel mechanism for controlling the expression of human COX2 to TNFα, and its absence in the mouse COX2 provides the foundation for further studies on understanding species-specific differential gene regulation.

Nuclear translocation of cytochrome c during apoptosis

Release of cytochrome c from mitochondria is a major event during apoptosis. Released cytochrome c has been shown to activate caspase-dependent apoptotic signals. In this report, we provide evidence for a novel role of cytochrome c in caspase-independent nuclear apoptosis. We showed that cytochrome c, released from mitochondria upon apoptosis induction, gradually accumulates in the nucleus as evidenced by both immunofluorescence and subcellular fractionation. Parallel to nuclear accumulation of cytochrome c, acetylated histone H2A, but not unmodified H2A, was released from the nucleus to the cytoplasm. Addition of purified cytochrome c to isolated nuclei recapitulated the preferential release of acetylated, but not deacetylated, histone H2A. Cytochrome c was also found to induce chromatin condensation. These results suggest that the nuclear accumulation of cytochrome c may be directly involved in the remodeling of chromatin. Our results provide evidence of a novel role for cytochrome c in inducing nuclear apoptosis.

The spatial distribution and temporal dynamics of brain regions activated during the perception of object and non-object patterns

Both animal and human studies suggest that the efficiency with which we are able to grasp objects is attributable to a repertoire of motor signals derived directly from vision. This is in general agreement with the long-held belief that the automatic generation of motor signals by the perception of objects is based on the actions they afford. In this study, we used magnetoencephalography (MEG) to determine the spatial distribution and temporal dynamics of brain regions activated during passive viewing of object and non-object targets that varied in the extent to which they afforded a grasping action. Synthetic Aperture Magnetometry (SAM) was used to localize task-related oscillatory power changes within specific frequency bands, and the time course of activity within given regions-of-interest was determined by calculating time-frequency plots using a Morlet wavelet transform. Both single subject and group-averaged data on the spatial distribution of brain activity are presented. We show that: (i) significant reductions in 10-25 Hz activity within extrastriate cortex, occipito-temporal cortex, sensori-motor cortex and cerebellum were evident with passive viewing of both objects and non-objects; and (ii) reductions in oscillatory activity within the posterior part of the superior parietal cortex (area Ba7) were only evident with the perception of objects. Assuming that focal reductions in low-frequency oscillations (< 30 Hz) reflect areas of heightened neural activity, we conclude that: (i) activity within a network of brain areas, including the sensori-motor cortex, is not critically dependent on stimulus type and may reflect general changes in visual attention; and (ii) the posterior part of the superior parietal cortex, area Ba7, is activated preferentially by objects and may play a role in computations related to grasping. © 2006 Elsevier Inc. All rights reserved.

Profit sharing in a manufacturing plant in a developing country : communication and organisational dynamics

The adaptation of profit sharing creates a fundamental change in employee compensation by making a portion of total compensation directly dependent upon the total profits of the firm and the performance of the employee. The major goal of this study is to test for and measure the impact of the independent variable, a profit sharing plan implemented at Shahvand Industrial Company, upon communication behaviour, communication outcomes, and organisational outcomes as dependent variables. A quasi-experimental non-equivalent control group design with pre and posttest was the research design used to test the effects of profit sharing participation on permanent-part-time operative employees implemented by SIC. Several conclusions were reached as a result of the statistical analysis of the data collected in this study. Overall, few of the hypothesised effects of profit sharing participation appeared to have been realised according to the empirical results of this study. The finding that certain communication behaviours were more favourable for profit sharing participants than for non-participants support the general hypothesis of the integrated profit sharing model. The observed changes in communication behaviours indicate that information sharing and idea generation are important components of the profit sharing process. The results of this study did not reveal any changes in either communication or organisational outcomes. A significant finding of this study is that the implementation of profit sharing plans require a relatively long period of time. Patience is required to achieve high levels of success and management must make long-term commitment to profit sharing. Findings of this study should be interpreted with caution, taking into consideration that most of the previo.us researches on profit sharing have been conducted in Western European or American countries, while the current study was based on data collected from an organisation in a developing country. This implies that the findings reported in this thesis may not be comparable in certain respects to results derived from companies in major industrialised economies.

Investigating viscous fluid flow in an internal mixer using computational fluid dynamics

This thesis presents an effective methodology for the generation of a simulation which can be used to increase the understanding of viscous fluid processing equipment and aid in their development, design and optimisation. The Hampden RAPRA Torque Rheometer internal batch twin rotor mixer has been simulated with a view to establishing model accuracies, limitations, practicalities and uses. As this research progressed, via the analyses several 'snap-shot' analysis of several rotor configurations using the commercial code Polyflow, it was evident that the model was of some worth and its predictions are in good agreement with the validation experiments, however, several major restrictions were identified. These included poor element form, high man-hour requirements for the construction of each geometry and the absence of the transient term in these models. All, or at least some, of these limitations apply to the numerous attempts to model internal mixes by other researchers and it was clear that there was no generally accepted methodology to provide a practical three-dimensional model which has been adequately validated. This research, unlike others, presents a full complex three-dimensional, transient, non-isothermal, generalised non-Newtonian simulation with wall slip which overcomes these limitations using unmatched ridding and sliding mesh technology adapted from CFX codes. This method yields good element form and, since only one geometry has to be constructed to represent the entire rotor cycle, is extremely beneficial for detailed flow field analysis when used in conjunction with user defined programmes and automatic geometry parameterisation (AGP), and improves accuracy for investigating equipment design and operation conditions. Model validation has been identified as an area which has been neglected by other researchers in this field, especially for time dependent geometries, and has been rigorously pursued in terms of qualitative and quantitative velocity vector analysis of the isothermal, full fill mixing of generalised non-Newtonian fluids, as well as torque comparison, with a relatively high degree of success. This indicates that CFD models of this type can be accurate and perhaps have not been validated to this extent previously because of the inherent difficulties arising from most real processes.

Modelling the dynamics of cutting during turning

This thesis presents an approach to cutting dynamics during turning based upon the mechanism of deformation of work material around the tool nose known as "ploughing". Starting from the shearing process in the cutting zone and accounting for "ploughing", new mathematical models relating turning force components to cutting conditions, tool geometry and tool vibration are developed. These models are developed separately for steady state and for oscillatory turning with new and worn tools. Experimental results are used to determine mathematical functions expressing the parameters introduced by the steady state model in the case of a new tool. The form of these functions are of general validity though their coefficients are dependent on work and tool materials. Good agreement is achieved between experimental and predicted forces. The model is extended on one hand to include different work material by introducing a hardness factor. The model provides good predictions when predicted forces are compared to present and published experimental results. On the other hand, the extension of the ploughing model to taming with a worn edge showed the ability of the model in predicting machining forces during steady state turning with the worn flank of the tool. In the development of the dynamic models, the dynamic turning force equations define the cutting process as being a system for which vibration of the tool tip in the feed direction is the input and measured forces are the output The model takes into account the shear plane oscillation and the cutting configuration variation in response to tool motion. Theoretical expressions of the turning forces are obtained for new and worn cutting edges. The dynamic analysis revealed the interaction between the cutting mechanism and the machine tool structure. The effect of the machine tool and tool post is accounted for by using experimental data of the transfer function of the tool post system. Steady state coefficients are corrected to include the changes in the cutting configuration with tool vibration and are used in the dynamic model. A series of oscillatory cutting tests at various conditions and various tool flank wear levels are carried out and experimental results are compared with model—predicted forces. Good agreement between predictions and experiments were achieved over a wide range of cutting conditions. This research bridges the gap between the analysis of vibration and turning forces in turning. It offers an explicit expression of the dynamic turning force generated during machining and highlights the relationships between tool wear, tool vibration and turning force. Spectral analysis of tool acceleration and turning force components led to define an "Inertance Power Ratio" as a flank wear monitoring factor. A formulation of an on—line flank wear monitoring methodology is presented and shows how the results of the present model can be applied to practical in—process tool wear monitoring in • turning operations.

Size dependent enhancement of helium ion irradiation tolerance in sputtered Cu/V nanolaminates

We have investigated the evolution of radiation damage and changes in hardness of sputter-deposited Cu/V nanolaminates upon room temperature helium ion irradiation. As the individual layer thickness decreases from 200 to 5 nm, helium bubble density and radiation hardening both decrease. The magnitude of radiation hardening becomes negligible for individual layer thickness of 2.5 nm or less. These observations indicate that nearly immiscible Cu/V interface can effectively absorb radiation-induced point defects and reduce their concentrations.

Size-dependent radiation tolerance in ion irradiated TiN/AlN nanolayer films

Interface effects on ion-irradiation tolerance properties are investigated in nanolayered TiN/AlN films with individual layer thickness varied from 5 nm to 50 nm, prepared by pulsed laser deposition. Evolution of the microstructure and hardness of the multilayer films are examined on the specimens before and after He ion-implantation to a fluence of 4 × 10 m at 50 keV. The suppression of amorphization in AlN layers and the reduction of radiation-induced softening are observed in all nanolayer films. A clear size-dependent radiation tolerance characteristic is observed in the nanolayer films, i.e., the samples with the optimum layer thickness from 10 nm to 20 nm show the best ion irradiation tolerance properties, and a critical layer thickness of more than 5 nm is necessary to prevent severe intermixing. This study suggests that both the interface characteristics and the critical length scale (layer thickness) contribute to the reduction of the radiation-induced damages in nitride-based ceramic materials. © 2013 Elsevier B.V. All rights reserved.

Inhibition of activation of dsRNA-dependent protein kinase and tumour growth inhibition

Inhibition of dsRNA-activated protein kinase (PKR), not only attenuates muscle atrophy in a murine model of cancer cachexia (MAC16), but it also inhibits tumour growth. In vitro the PKR inhibitor maximally inhibited growth of MAC16 tumour cells at a concentration of 200 nM, which was also maximally effective in attenuating phosphorylation of PKR and of eukaryotic initiation factor (eIF)2 on the a-subunit. There was no effect on the growth of the MAC13 tumour, which does not induce cachexia, even at concentrations up to 1,000 nM. There was constitutive phosphorylation of PKR and eIF2a in the MAC16, but not in the MAC13 tumour, while levels of total PKR and eIF2a were similar. There was constitutive upregulation of nuclear factor-?B (NF-?B) in the MAC16 tumour only, and this was attenuated by the PKR inhibitor, suggesting that it arose from activation of PKR. In MAC16 alone the PKR inhibitor also attenuated expression of the 20S proteasome. The PKR inhibitor potentiated the cytotoxicity of both 5-fluorouracil and gemcitabine to MAC16 cells in vitro. These results suggest that inhibitors of PKR may be useful therapeutic agents against tumours showing increased expression of PKR and constitutive activation of NF-?B, and may also prove useful in sensitising tumours to standard chemotherapeutic agents.

Attenuation of muscle atrophy in a murine model of cachexia by inhibition of the dsRNA-dependent protein kinase

Atrophy of skeletal muscle is due to a depression in protein synthesis and an increase in degradation. Studies in vitro have suggested that activation of the dsRNA-dependent protein kinase (PKR) may be responsible for these changes in protein synthesis and degradation. In order to evaluate whether this is also applicable to cancer cachexia the action of a PKR inhibitor on the development of cachexia has been studied in mice bearing the MAC16 tumour. Treatment of animals with the PKR inhibitor (5 mg kg-1) significantly reduced levels of phospho-PKR in muscle down to that found in non-tumour-bearing mice, and effectively attenuated the depression of body weight, with increased muscle mass, and also inhibited tumour growth. There was an increase in protein synthesis in skeletal muscle, which paralleled a decrease in eukaryotic initiation factor 2α phosphorylation. Protein degradation rates in skeletal muscle were also significantly decreased, as was proteasome activity levels and expression. Myosin levels were increased up to values found in non-tumour-bearing animals. Proteasome expression correlated with a decreased nuclear accumulation of nuclear factor-κB (NF-κB). The PKR inhibitor also significantly inhibited tumour growth, although this appeared to be a separate event from the effect on muscle wasting. These results suggest that inhibition of the autophosphorylation of PKR may represent an appropriate target for the attenuation of muscle atrophy in cancer cachexia. © 2007 Cancer Research UK.

Molecular dynamics simulations:bring biomolecular structures alive on a computer

The molecular dynamics (MD) simulations play a very important role in science today. They have been used successfully in binding free-energy calculations and rational design of drugs and vaccines. MD simulations can help visualize and understand structures and dynamics at an atomistic level when combined with molecular graphics programs. The molecular and atomistic properties can be displayed on a computer in a time-dependent way, which opens a road toward a better understanding of the relationship of structure, dynamics, and function. In this chapter, the basics of MD are explained, together with a step-by-step description of setup and running an MD simulation.

The influence of pH and fluid dynamics on the antibacterial efficacy of 45S5 Bioglass

In recent years, there has been considerable interest in the potential antibacterial properties that bioactive glasses may possess. However, there have been several conflicting reports on the antibacterial efficacy of 45S5 Bioglass®. Various mechanisms regarding its mode of action have been proposed, such as changes in the environmental pH, increased osmotic pressure, and ‘needle like’ sharp glass debris which could potentially damage prokaryotic cell walls and thus inactivate bacteria. In this current study, a systematic investigation was undertaken on the antibacterial efficacy of 45S5 Bioglass® on Escherichia coli NCTC 10538 and Staphylococcus aureus ATCO 6538 under a range of clinically relevant scenarios including varying Bioglass® concentration, direct and indirect contact between Bioglass® and microorganisms, static and shaking incubation conditions, elevated and neutralised pH environments. The results demonstrated that under elevated pH conditions, Bioglass® particles has no antibacterial effect on S. aureus whilst, a concentration dependent antibacterial effect against E. coli was observed. However, the antibacterial activity ceased when the pH of the media was neutralised. The results of this current study therefore suggest that the mechanism of antibacterial activity of Bioglass® is associated with changes in the environmental pH; an environment that is less likely to occur in vivo due to buffering of the system.

Use of imaging technology to better understand soft contact lens fit dynamics

The principal theme of this thesis is the identification of additional factors affecting, and consequently to better allow, the prediction of soft contact lens fit. Various models have been put forward in an attempt to predict the parameters that influence soft contact lens fit dynamics; however, the factors that influence variation in soft lens fit are still not fully understood. The investigations in this body of work involved the use of a variety of different imaging techniques to both quantify the anterior ocular topography and assess lens fit. The use of Anterior-Segment Optical Coherence Tomography (AS-OCT) allowed for a more complete characterisation of the cornea and corneoscleral profile (CSP) than either conventional keratometry or videokeratoscopy alone, and for the collection of normative data relating to the CSP for a substantial sample size. The scleral face was identified as being rotationally asymmetric, the mean corneoscleral junction (CSJ) angle being sharpest nasally and becoming progressively flatter at the temporal, inferior and superior limbal junctions. Additionally, 77% of all CSJ angles were within ±50 of 1800, demonstrating an almost tangential extension of the cornea to form the paralimbal sclera. Use of AS-OCT allowed for a more robust determination of corneal diameter than that of white-to-white (WTW) measurement, which is highly variable and dependent on changes in peripheral corneal transparency. Significant differences in ocular topography were found between different ethnicities and sexes, most notably for corneal diameter and corneal sagittal height variables. Lens tightness was found to be significantly correlated with the difference between horizontal CSJ angles (r =+0.40, P =0.0086). Modelling of the CSP data gained allowed for prediction of up to 24% of the variance in contact lens fit; however, it was likely that stronger associations and an increase in the modelled prediction of variance in fit may have occurred had an objective method of lens fit assessment have been made. A subsequent investigation to determine the validity and repeatability of objective contact lens fit assessment using digital video capture showed no significant benefit over subjective evaluation. The technique, however, was employed in the ensuing investigation to show significant changes in lens fit between 8 hours (the longest duration of wear previously examined) and 16 hours, demonstrating that wearing time is an additional factor driving lens fit dynamics. The modelling of data from enhanced videokeratoscopy composite maps alone allowed for up to 77% of the variance in soft contact lens fit, and up to almost 90% to be predicted when used in conjunction with OCT. The investigations provided further insight into the ocular topography and factors affecting soft contact lens fit.

The structure and dynamics of saxicolous lichen communities

The saxicolous lichen vegetation on Ordovician slate rock at the mouth of the River Dovey, South Merionethshire, Wales was described in relation to several environmental variables which include aspect, slope angle, light intensity, rock porosity, rock microtopography and rock stability. Each of the measured environmental variables was shown to influence the lichen vegetation. A number of groups of species which were characteristic of certain environments were described. The data from the saxicolous lichen communities were analysed using multivariate analysis. Qualitative and quantitative data were ordinated, the qualitative data being easier to interpret ecologically, and site number (which reflects distance from the sea and altitude), rock porosity and light intensity were shown to be important environmental variables. A classification of the data was also carried out. The results of the ordination and classification were combined together and a model constructed which describes saxicolous lichen vegetation. A method which uses the model as an aid to the design and interpretation of field experiments is described. The model is applied to an experiment which investigates the effect on growth of transplanting four saxicolous lichens to different aspects. Growth was inhibited in Physcia orbicularis and Parmelia conspersa on rock surfaces of northwest aspect compared with growth on rock surfaces of southeast aspect. Growth was inhibited in Parmelia glabratula ssp. fuliginosa on rock surfaces of southeast aspect compared with rock surfaces of northwesr aspect. The growth of Parmelia saxatilis was similar at both southeast and northwesr aspects. Growth inhibition or stimulation in thalli of Physcia orbicularis, Parmelia conspersa and Parmelia glabratula ssp. fuliginosa after transplantation was consistent with the predictions of the model while the results for Parmelia saxatilis were not as expected. There was evidence that the frequency of Parmelia conspersa and Parmelia glabratula at a site is related to an effect of the environment on the growth of the thalli. There was also evidence that the frequency of Physcia orbicularis at a site is related to an effect of the environment on the establishment phase of the thalli and for the competitive exclusion of Parmelia saxatilis thalli from southeast facing rock surfaces. The distribution of lichens in relation to height on nine rock surfaces was investigated. It was suggested that the distribution of the lichens was influenced by microclimatic factors which are related to height on the rock, environmental variables which are associated with the rock substratum (e.g. rock porosity and rock microtopography) and by historical factors. The pattern of one crustose and one foliose lichen on four rock surfaces of different aspect and slope was investigated. On the vertically inclined surface the density of small thalli of Buellia aethalea and Parmelia glabratula ssp fuliginosa was correlated with the microtopography of the surface in transects horizontally across the rock surface but not in transects vertically down the rock surface. there were consitent differences in the scale and intensity of pattern horizontally and vertically and also a decrease in the intensity of pattern vertically as the slope of the rock surface decreased. These results were consistent with the suggestion of a gradient of microclimatic factors up the rock. The differences in the scale and intensity of pattern in different size classes in the population were consistent with the changes in pattern with time which have been shown to occur during succession in sand dune and salt marsh vegetation. The relationship between thallus size and height on a rock surface and between the radial growth rate and location of a thallus on a rock surface were investigated. Thalli of Parmelia glabratula ssp. fuliginosa were larger at the top of the rock surface than at the bottom and the data were consistent with the suggestion that the colonisation of the rock surface began at the top and, in time, spread downwards. The radial growth rate of the thalli could not be related to variation in slope, porosity, microtopography or directly to height on the rock but could be related to the horizontal location of the thalli on the rock. These results were consistent with the suggestion that here is a gradient of microclimatic factors across the rock surface which is also modified by height on the rock surface. The succession of lichen communities was described by relating the vegetation to rock porosity, rock microtopography, species diversity and rock stability. An initial stage dominated by crustose lichens leads to communities dominated by crustose, foliose and fruticose species. In the late stages of the succession on some rock surfaces crustose species again become dominant. The occurrence of the climax state and cyclic vegetation change in lichen communities are discussed. A mthod of estimating the age structure of a lichen population by relating thallus size to growth rate is described. The sources of error in the method are discussed in some detail and several refinements suggested to increase the accuracy of the method. The population dynamics of Parmelia glabratula ssp. fuliginosa was investigated by applying life tables to the age structures of eight different populations. The data were consistent with a period of relatively constant recruitment of thalli into the populations. Mortality in lichen populations was divided into deaths which occur after fragmentation of the thallus and deaths which occur after catastrophic environmental events. THe data suggest that the rate of fragmenting death is dependent on the age of the thallus while the rate of catastrophic death is dependent on the number of thalli established in an age class. A comparison of the numbers of thalli in each age class in the eight populations suggested that population density is controlled firstly, by climate and secondly, by variables related to the local rock surface environment. The rate of fragmenting death is related to the diversity of the community and the influence of diversity together with environmental variables in fluctuating or cyclic changes in population number.