How did the crisis affect small and medium-sized enterprises? -- from a field study of the metal-working industry in Java

This paper focuses on the impact of Indonesia's economic crisis on small and medium-sized enterprises (SMEs). It shows how the performance of SMEs during the crisis varied widely even in the same industrial subsector, and found that the factors most affecting performance have been market orientation and the linkages that the SMEs have formed with the buyers of their products. Well-performing SMEs were found to have utilized putting-out linkages with wholesalers which enabled them to switch to products having better markets. On the other hand, the SMEs which had subcontracting linkages with assemblers or contracting linkages with user-factories (with the exception of SMEs having export-oriented linkages) suffered badly in the crisis because of specificity of products with little room for switching. The paper also found that exposure to debt due to borrowing for investment has been another factor affecting performance, but that enterprise size has had no linear correlation with performance.

Unlocking the Potential of Zambian Micro, Small and Medium Enterprises "Learning from the international best practices - the Southeast Asian Experience"

This paper examines the SMEs performance in Zambia and attempts to identify some practical lessons that Zambia can learn from Southeast Asian countries (with reference to Malaysia) in order to facilitate industrial development through unlocking the potential of its SMEs sector. Malaysia and Zambia were at the same level of economic development as evidenced by similar per capita incomes but Zambia has remained behind economically and its manufacturing sector has stagnated as if both countries did not have similar initial endowments. It therefore, becomes imperative that Zambia learns from such countries on how they managed to take-off economically with a focus on SME development. Training (education), research & development, market availability and technological advancement through establishment of industrial linkages coupled with cluster formation were some of the outstanding strategies identified that Zambia could use as a “key” to unlock its SMEs’ potential as it strives to meet the UN MDGs in particular halving its poverty levels by 2015 and also realizing its vision of becoming a middle income earner by 2030.

Financing Small and Medium Enterprises in Myanmar

Small and medium enterprises (SMEs) share the biggest part in Myanmar economy in terms of number, contribution to employment, output, and investment. Myanmar economic growth is thus totally dependent on the development of SMEs in the private sector. Today, the role of SMEs has become more vital in strengthening national competitive advantage and the speedy economic integration into the ASEAN region. However, studies show that SMEs have to deal with a number of constraints that hinder their development potential, such as the shortage in power supply, unavailability of long-term credit from external sources and many others. Among them, the financing problem of SMEs is one of the biggest constraints. Such is deeply rooted in demand and supply issues, macroeconomic fundamentals, and lending infrastructure of the country. The government’s policy towards SMEs could also lead to insufficient support for the SMEs. Thus, focusing on SMEs and private sector development as a viable strategy for industrialization and economic development of the country is a fundamental requirement for SME development. This paper recommends policies for stabilizing macro economic fundamentals, improving lending infrastructures of the country and improving demand- and supply-side conditions from the SMEs financing perspective in order to provide a more accessible financing for SMEs and to contribute in the overall development of SMEs in Myanmar thereby to sharpen national competitive advantage in the age of speedy economic integration.

Empirical global value chain analysis in electronics and automobile industries :An application of Asian international input-output tables

This study aims to examine the international value distribution structure among major East Asian economies and the US. The mainstream trade theory explains the gains from trade; however, global value chain (GVC) approach emphasises uneven benefits of globalization among trading partners. The present study is mainly based on this view, examining which economy gains the most and which the least from the East Asian production networks. Two key industries, i.e., electronics and automobile, are our principle focus. Input-output method is employed to trace the creation and flows of value-added within the region. A striking fact is that some ASEAN economies increasingly reduce their shares of value-added, taken by developed countries, particularly by Japan. Policy implications are discussed in the final section.

Chapter 7 Clusters of Modern and Local Industries in Vietnam

Since the introduction of the Doi Moi ('renovation') economic reform in 1986, Vietnam has experienced a transformation of its economic management, from a central planning economy to a market-oriented economy. High economic growth, created by the liberalization of activities in all sectors of the economy, has changed the economic structure of the country, and the once agriculture-based and poverty-stricken land now generates a midlevel income and possesses many industrial bases. Economic growth has also changed the landscape of the country. Business complexes have been built in metropolises like Ho Chi Minh City and Hanoi, and rice fields have been converted into industrial zones. As the number of enterprises increased, areas began to emerge where many enterprises agglomerated. Some of these 'clusters' were groups of cottage industry households, while many others were large-scale industrial clusters. As Porter [1998] argues, industrial clusters are the source of a nation's 'competitive advantage'. McCarty et al. [2005] indicate that in some key industries in Vietnam, some clusters of enterprises have been created, although the degree of agglomeration differs from one industry to another. Using industry census data from 2001, they include dot density maps for the 12 leading manufacturing industries in Vietnam. They show that most of the industries analyzed are clustered either in Hanoi or Ho Chi Minh City (or both). Among these 12 industries, the garments industry has the greatest tendency to cluster, followed by textile, rice, seafood, and paper industries. The fact that industrial clusters have begun to form in some areas could be a positive sign for Vietnam's future economic development. What is lacking in McCarty et al. [2005], however, is the identification of the participants in the industrial clusters. Some argue for the importance of small and medium enterprises (SMEs) in Vietnam's economic development (e.g. Nguyen Tri Thanh [2007], Tran Tien Cuong et al. [2008]), while others stress the impact of foreign direct investments (FDI) (for example, Tuan Bui [2009]). Adding information about the participants in the above cluster study (and in other studies of spatial patterns of location of enterprises) may broaden the scope for analysis of economic development in Vietnam. This study aims to reveal the characteristics of industrial clusters in terms of their participants and locations. The findings of the study may provide basic information for evaluating the effects of agglomeration and the robustness of the effects in the industrial clusters in Vietnam. Section 1 describes the characteristics of economic entities in Vietnam such as ownership, size of enterprise, and location. Section 2 examines qualitative aspects of industrial clusters identified in McCarty et al. [2005] and uses information on the size and ownership of clusters. Three key industries (garments, consumer electronics, and motor vehicle) are selected for the study. Section 3 identifies another type of cluster commonly seen in Vietnam, composed of local industries and called 'craft villages'. Many such villages have been developed since the early 1990s. The study points out that some of these villages have become industrialized (or are becoming industrialized) by introducing modern modes of production and by employing thousands of laborers.

Regional Cooperation of Small & Medium Firms in Japanese Industrial Clusters

This study examines the effects of intra-regional cooperation among firms and institutions on the growth of firms, using the unique data set of questionnaire survey collected in the three major industrial clusters in Japan. In contrast to the existing studies on regional innovations or agglomeration economies, this study explicitly focuses on the detailed contents of cooperative activities with two specific viewpoints: 1) the contents of regional cooperation in each of the three production stages of R&D, commercialization, and marketing, and 2) the detailed types of alliance partners. Our results demonstrate three points: 1) positive correlations are observed between the intensity of regional cooperation and the firm growth rate and R&D expenditure, 2) horizontal cooperation such as alliances with universities and cross-industry exchange organizations has positive significant effects on the growth rate of firms, which is in contrast with the previous studies that stressed only the role of vertically integrated inter-firm linkages in Japan, and 3) contents and partners of regional cooperation are different among the three clusters based on different dominant industries.

Diverging Development Paths of the Electronics Industry in Korea and Taiwan

This paper examines the process and mechanism of economic development in the Republic of Korea and Taiwan through a comparative analysis of the electronics industry in each country. The paper will show that in its initial stage of development, the electronics industry in both economies had the same type of dual structure: a domestic demand sector based on the protected domestic market, and an export sector intended to capitalize on low-wage labor for the international market. However, this dual structure in the two economies faded away after the mid-1970s as their respective indigenous export-oriented enterprises began to develop. But the primary industrial players in each economy were very different. In Korea they were comprehensive electronics manufacturers affiliated with chaebols, and in Taiwan they were small and medium-size enterprises. Differences in the two economies' development mechanisms have brought about this divergence in development paths. In Korea this mechanism has been characterized by the government's positive role and the chaebol's readiness to react to the government's leadership. In Taiwan the development mechanism has been based on the private sector independent from the government. As an extension of such diverged development paths, ICs and personal computers showed spectacular growth in Korea and Taiwan after the 1980s. The development of ICs in Korea was primarily the result of a decisive role played by the chaebol's sizable financial resources, while the competitiveness in personal computers largely reflected the agility and flexibility of Taiwanese small and medium-size enterprises.

Bank Borrowing and Financing of Medium-sized Firms in Indonesia

The improvement of financial intermediation functions is crucial for a robust banking system. When lending, banks have to cope with such problems as information asymmetry and adverse selection. In order to mitigate these problems, banks have to product information and improve their techniques of lending. During the 1998 financial crisis, Indonesia's banking system suffered severe damage and revealed that the country's banking intermediation functions did not work well. This paper examines the financial intermediation functions of banks in Indonesia and analyzes the importance of bank lending to firms. The focus is on medium-sized firms, and "relationship lending", one of the bank lending techniques, is used to examine financial intermediation in Indonesia. The results of logit regressions show that the relationship between a bank and a firm affects the probability of bank lending. The amount of borrowing and collateral are also affected by a firm's relationship with a bank. When viewed from the standpoint of relationship lending to medium-sized firms, Indonesian banks cannot be criticized for any malfunction of financial intermediation.

A Distributive Comparison of Enterprise Size in Korea and Taiwan

Research to date on the economic development of the Republic of Korea and Taiwan has frequently contrasted the two economies by depicting the former as centered on large-scale enterprises and the latter on small and medium-size enterprises (SMEs). The purpose of this study is to see if the appropriateness of this perception will also be verified by the statistical data. In Section I the authors utilized census data on the Korean and Taiwanese manufacturing sectors to compare the distribution pattern of the sizes of enterprises in the two economies. However, on examining the available data for making this comparison, the authors discovered that for Korea the statistics provided are those at the level of the establishment (a physical unit engaging in industrial activities such as a factory, workshop, office, or mine) while the statistics for Taiwan are those at the enterprise level. Mindful of this difference, the authors looked at the portion of the economy accounted for by large-scale establishments in Korea that employed 500 workers or more and by enterprises in Taiwan employing the same number of workers, and they discovered that the portion that these large-scale businesses account for, especially in the area of output, has steadily declined since the 1980s. When comparing the share of total production that these large-scale establishments/enterprises account for in the two economies, the authors concluded that those in Korea accounted for a larger share of that economy's production than did their counterparts in Taiwan. The authors then compared the portion of the economy accounted for by establishments in Korea and enterprises in Taiwan that employed less than ten workers, and they found that the portion of the two economies that these very small-scale production units accounted for has also been on the decline. Section II compares the portions of the two economies accounted for by large business groups. After comparing the percentage of GDP accounted for by the total sales of these business groups, the authors found that large business groups in Korea have played a far more important role in Korean economy than has been the case for such groups in Taiwan. This difference in the importance of such business groups in the two economies has also played an significant part in fostering the perceived dichotomy of large-scale enterprises playing the important role in Korea versus SMEs being the important players in Taiwan. Section III compares the percentage of total exports accounted for by SMEs, and shows that SMEs in Taiwan account for a larger share of exports than do their counterparts in Korea. This section also shows that in Taiwan the share of export sales for SMEs has consistently exceeded that for non-SMEs, while in Korea the relationship between enterprise size and the rate of export sales has been directly proportional. This difference in the size of the major export players is another factor fostering the perception of the Korean economy being centered on big business while Taiwan's is on SMEs. Although there were difficulties and limitations when comparing the data of the two economies, the statistical comparison undertaken in this study shows that in general big business has played the major role in the development of the Korean economy while in Taiwan's economic development this role has been played by SMEs. Thus the statistical data also verifies the perceived dichotomy of these two economies.

Explaining the Persistence of State-ownership in China

In the recent decade China witnessed an upsurge of privatization of small and medium state-owned enterprises (SOEs). In contrast to the consequent sharp reduction in the number of firms, however, the estimated share of broadly-defined SOEs that includes limited liabilities companies controlled by the State has shown virtually no sign of decline. We explain the backgrounds of this seemingly paradoxical persistence of state-ownership by looking into two distinctive types of large SOEs: traditional SOEs that remain dominant in oligopolistic industries and manager-controlled SOEs surviving in competitive industries. The two types exemplify several factors constraining further progress of SOE reform such as, financing the costs of restructuring, redefining the role of the State as the single dominant shareholder, and balancing the interests of the State and managers as entrepreneurs. Sorting these issues out will take time, which means that instabilities associated with state corporate ownership will remain in place in the foreseeable future in China.

The Impact of United States Sanctions on the Myanmar Garment Industry

The United States imposed trade sanctions against the military regime in Myanmar in July 2003. The import ban damaged the garment industry in particular. This industry exported nearly half of its products to the United States, and more than eighty percent of United States imports from Myanmar had been clothes. The garment industry was probably the main target of the sanctions. Nevertheless, the impact on the garment industry and its workers has not been accurately evaluated or closely examined. The purpose of this paper is to evaluate the impact of the sanctions and to further understand the present situation. This is done using several sources of information, including the author's field and questionnaire surveys. This paper also describes the process of selection and polarization underway in the garment industry, an industry that now has more severe competition fueled by the sanctions. Through such a process, the impact was inflicted disproportionately on small and medium-sized domestic firms and their workers.

米国経済制裁によるミャンマー縫製産業への影響－苦しむのは誰か？－

2003年7月、米国はミャンマー製品の全面的な輸入禁止という、厳しい経済制裁を発動した。この制裁の最大の被害者は、ミャンマー縫製産業であった。制裁発動前、ミャンマーの対米輸出の８割以上は衣料品だったからである。多くの企業が倒産し、多くの労働者が職を失った。しかし、これまでその影響を包括的かつ正確に評価した調査・研究は皆無であった。本論文は現地での詳細なフィールド・ワークに基づき、経済制裁がミャンマー縫製産業に与えた影響を分析する。経済制裁で苦しむのは誰か。そして、経済制裁は所期の効果を上げているのか。これらの疑問に答える。

Myanmar Sugar SMEs: History, Technology, Location and Government Policy

Small and medium enterprises (SMEs) engaged in sugar processing in Myanmar appeared in the last decade of the socialist era. An acute sugar deficit, restricted trade in white sugar, and high demand from the conventional dairy business led to the growth of sugar SMEs by appropriate blending of semi-finished products (syrup) in the fields, which were then processed in vacuum pans and centrifugals to obtain white sugar. This became a tradable commodity and sugar SMEs grew in clusters in big cities. They are family-owned businesses. However, they lack the bagasse-based power generation. In recent years, large modern sugar factories operated by private and military companies have emerged as key players. The current shortage of fuel feedstock and competition for raw materials have become driving forces that shift sugar SMEs from market-oriented to raw material-oriented locations. Internal competition among key players made sugar price highly volatile, too. Being placed on a level playing field, the whole industry should be upgraded in terms of price and quality to become export-oriented.

Knowledge spillover in Indian automobile industry : the process and the coverage

In India, as the production of passenger cars increased, many local small and medium enterprises (SMEs) entered the parts and components manufacturing sector. The sources of knowledge for large enterprises and SMEs are different. Naturally, spillover effects among large enterprises and between large enterprises and SMEs are different. This paper focuses on knowledge spillover among large enterprises and from large enterprises to SMEs. Subcontractor can absorb relation-specific skills through repeated interaction with parent company. The results of field survey emphasizes that relation-specific skills are a determinant factor of spillover effects from assemblers and large auto component manufacturers to SMEs. Econometric analysis shows that spillover effects among medium and large automobile units and from medium and large automobile units to small units went beyond boundary of cluster.