Estimation Technique of International Input-Output Model by Non-survey Method

The Asian International Input-Output (IO) Table that is compiled by Institute of Developing Economies-JETRO (IDE), was constructed in Isard type form. Thus, it required a lot of time to publish. In order to avoid this time-lag problem and establish a more simple compilation technique, this paper concentrates on verifying the possibility of using the Chenery-Moses type estimation technique. If possible, applying the Chenery-Moses instead of the Isard type would be effective for both impact and linkage analysis (except for some countries such as Malaysia and Singapore and some primary sectors. Using Chenery-Moses estimation method, production of the Asian International IO table can be reduced by two years. And more, this method might have the possibilities to be applied for updating exercise of Asian IO table.

Transport Sector and Regional Price Differentials: A SCGE Model for Chinese Provinces

With regression formulas replaced by equilibrium conditions, a spatial CGE model can substantially reduce data requirements. Detailed regional analyses are thus possible in countries where only limited regional statistics are available. While regional price differentials play important roles in multi-regional settings, transport does not receive much attention in existing models. This paper formulates a spatial CGE model that explicitly considers the transport sector and FOB/CIF prices. After describing the model, performance of our model is evaluated by comparing the benchmark equilibrium for China with survey-based regional I-O and interregional I-O tables for 1987. The structure of Chinese economies is summarized using information obtained from the benchmark equilibrium computation. This includes regional and sectoral production distributions and price differentials. The equilibrium for 1997 facilitates discussion of changes in regional economic structures that China has experienced in the decade.

Vertical specialisation indicator based on supply-driven input-output model

“Import content of exports”, based on Leontief’s demand-driven input-output model, has been widely used as an indicator to measure a country’s degree of participation in vertical specialisation trade. At a sectoral level, this indicator represents the share of inter-mediates imported by all sectors embodied in a given sector’s exported output. However, this indicator only reflects one aspect of vertical specialisation – the demand side. This paper discusses the possibility of using the input-output model developed by Ghosh to measure the vertical specialisation from the perspective of the supply side. At a sector level, the Ghosh type indicator measures the share of imported intermediates used in a sector’s production that are subsequently embodied in exports by all sectors. We estimate these two indicators of vertical specialisation for 47 selected economies for 1995, 2000, 2005 using the OECD’s harmonized input-output database. In addition, the potential biases of both indicators due to the treatment of net withdrawals in inventories, are also discussed.

Measuring global value chains and regional economic integration : an international input-output approach

Firms that are expanding their cross-border activities, such as vertical specialization trade, outsourcing, and fragmentation productions, have brought dramatic changes to the global economy during the last two decades. In an attempt to understand the evolution of the interaction among countries or country groups, many trade-statistics-based indicators have been developed. However, most of these statistics focus on showing the direct trade-specific-relationship among countries, rather than considering the roles that intercountry and interindustrial production networks play in a global economy. This paper uses the concepts of trade in value added as measured by the input–output tables of OECD and IDE-JETRO to provide alternative indicators that show the evolution of regional economic integration and global value chains for more than 50 economies. In addition, this paper provides thoughts on how to evaluate comparative advantages on the basis of value added using an international input–output model.

Evaluation of Non-Survey International IO Construction Methods with the Asian-Pacific Input-Output Table

This paper presents four non-survey methods to construct a full-information international input-output table from national IO tables and international import and export statistics, and this paper tests these four methods against the semi-survey international IO table for nine East-Asian countries and the USA, which is constructed by the Institute of Developing Economies in Japan. The tests show that the impact on the domestic flows of using self-sufficiency ratios is small, except for Singapore and Malaysia, two countries with large volumes of smuggling and transit trade. As regards the accuracy of the international flows, all methods show considerable errors, of 10%-40% for commodities and of 10%-70% for services. When more information is added, i.e. going from Method 1 to 4, the accuracy increases, except for Method 2 that generally produces larger errors than Method 1. In all, it seems doubtful whether replacing the semi-survey Asian-Pacific IO table with one of the four non-survey tables is justified, except when the semi-survey table itself is also considered to be just another estimate.

A New Measurement for International Fragmentation of the Production Process: An International Input-Output Approach

The paper investigates the possibility of constructing a new measurement for analysing international fragmentation of the production process. It asserts that the current usage of relevant data, whether the trade shares of parts and components or the index of Vertical Specialisation, is quite unsatisfactory for measuring the phenomenon, since they critically lack the overall perspective of the entire structure of production chains. 　The new measurement is formulated such that it captures every aspect of the vertical sequence of production linkages. It is based on the input-output model of Average Propagation Lengths, recently developed by Eric Dietzenbacher and others, which show the average number of production stages that are passed through for an exogenous change in one industry to affect another. By applying this model to the data of the Asian International Input-Output Tables, the index is able to measure the international dimension of production sharing and division of labour in East Asia.

Input-Output Based Economic Impact Evaluation System for Small City Development: A Case Study on Saemangeum's Flux City Design

The paper aims to develop a quasi-dynamic interregional input-output model for evaluating the macro-economic impacts of small city development. The features of the model are summarized as follows: (1) the consumption expenditure of households is regarded as an endogenous variable, (2) the technological change is determined by the change of industrial Location Quotient caused by firm's investment activities. (3) a strong feedback function between the city design and the economic analysis is provided. For checking the performance of the model, Saemangeum's Flux City Design Plan is used as the simulation target in our paper.

Trade Coefficients and the Role of Elasticity in a Spatial CGE Model Based on the Armington Assumption

The Armington Assumption in the context of multi-regional CGE models is commonly interpreted as follows: Same commodities with different origins are imperfect substitutes for each other. In this paper, a static spatial CGE model that is compatible with this assumption and explicitly considers the transport sector and regional price differentials is formulated. Trade coefficients, which are derived endogenously from the optimization behaviors of firms and households, are shown to take the form of a potential function. To investigate how the elasticity of substitutions affects equilibrium solutions, a simpler version of the model that incorporates three regions and two sectors (besides the transport sector) is introduced. Results indicate: (1) if commodities produced in different regions are perfect substitutes, regional economies will be either autarkic or completely symmetric and (2) if they are imperfect substitutes, the impact of elasticity on the price equilibrium system as well as trade coefficients will be nonlinear and sometimes very sensitive.

Cost Reduction Effects of "pseudo FTAs" in Asia -Application of a price model based on a multilateral I/O table-

This paper examines the repercussion effects on the production cost of industries in Asian countries when some countries eliminate tariffs and import commodity taxes on all imports. This kind of analysis is related in some sense to that measuring the effects of FTAs on economies, and thus may be considered as an analysis of “pseudo FTAs.” Examining a number of combinations of “pseudo FTAs” between China, Japan, and ASEAN, it is found that the case of China plus Japan plus ASEAN is the most effective “pseudo FTA” of the combinations in terms of production cost reduction. The method is a form of price model based on the Asian International Input-Output Table. Almost no studies on price models related to multilateral I/O tables have been implemented thus far.

How are global value chains fragmented and extended in China's domestic production networks?

Global value chains are supported not only directly by domestic regions that export goods and services to the world market, but also indirectly by other domestic regions that provide parts, components, and intermediate services to final exporting regions. In order to better understand the nature of a country’s position and degree of participation in global value chains, we need to more fully examine the role of individual domestic regions. Understanding the domestic components of global supply chains is especially important for large developing countries like China and India, where there may be large variations in economic scale and development between domestic regions. This paper proposes a new framework for measuring domestic linkages to global value chains. This framework measures domestic linkages by endogenously embedding a country’s domestic interregional input-output (IO) table in an international IO model. Using this framework, we can more clearly describe how global production is fragmented and extended through linkages across a country’s domestic regions. This framework will also enable us to estimate how value added is created and distributed in both domestic and international segments of global value chains. For examining the validity and usefulness of this new approach, some numerical results are presented and discussed based on the 2007 Chinese interregional IO table, China customs statistics at the provincial level, and World Input-Output Tables (WIOTs).

Spatial price equilibrium and the transport sector : a trade-consistent SCGE model

This paper presents a framework for an SCGE model that is compatible with the Armington assumption and explicitly considers transport activities. In the model, the trade coefficient takes the form of a potential function,and the equilibrium market price becomes similar to the price index of varietal goods in the context of new economic geography (NEG). The features of the model are investigated by using the minimal setting, which comprises two non-transport sectors and three regions. Because transport costs are given exogenously to facilitate study of their impacts, commodity prices are also determined relative to them. The model can be described as a system of homogeneous equations, where an output in one region can arbitrarily be determined similarly as a price in the Walrasian equilibrium. The model closure is sensitive to formulation consistency so that homogeneity of the system would be lost by use of an alternative form of trade coefficients.

Adjustment methods of national input-output tables for harmonized and consistent multi-regional input-output databases

Despite the fact that input–output (IO) tables form a central part of the System of National Accounts, each individual country's national IO table exhibits more or less different features and characteristics, reflecting the country's socioeconomic idiosyncrasies. Consequently, the compilers of a multi-regional input–output table (MRIOT) are advised to thoroughly examine the conceptual as well as methodological differences among countries in the estimation of basic statistics for national IO tables and, if necessary, to carry out pre-adjustment of these tables into a common format prior to the MRIOT compilation. The objective of this study is to provide a practical guide for harmonizing national IO tables to construct a consistent MRIOT, referring to the adjustment practices used by the Institute of Developing Economies, JETRO (IDE-JETRO) in compiling the Asian International Input–Output Table.

Compilation of a regionally-extended inter-country input-output table and its application to global value chain analysis

Studies on the rise of global value chains (GVCs) have attracted a great deal of interest in the recent economics literature. However, due to statistical and methodological challenges, most existing research ignores domestic regional heterogeneity in assessing the impact of joining GVCs. GVCs are supported not only directly by domestic regions that export goods and services to the world market, but also indirectly by other domestic regions that provide parts, components, and intermediate services to final exporting regions. To better understand the nature of a country's position and degree of participation in GVCs, we need to fully examine the role of individual domestic regions. Understanding the domestic components of GVCs is especially important for larger economies such as China, the US, India and Japan, where there may be large variations in economic scale, geography of manufacturing, and development stages at the domestic regional level. This paper proposes a new framework for measuring domestic linkages to global value chains. This framework measures domestic linkages by endogenously embedding a target country's (e.g. China and Japan) domestic interregional input–output tables into the OECD inter-country input–output model. Using this framework, we can more clearly understand how global production is fragmented and extended internationally and domestically.