Theory of a Flowchart Approach to Industrial Cluster Policy

A flowchart approach to industrial cluster policy emphasizes the importance ofthe ordering of policy measures. The flow of policy implementation is to establish an industrial zone, to invite an anchor company, and to promote its related companies to invest in the industrial zone. This article delineated "a flowchart approach to industrial cluster policy" by proposing sufficient conditions for forming industrial clusters typical in the manufacturing industry in Asia to enhance regional economic growth. The typical industrial cluster policy was theorized by defining an industrial zone as "quasi-public goods", and it was shown that the policy enhances economic growth under a production function of "increasing returns to scale" of an anchor company. Critical amounts of the production of "scale economies" that are used by the related companies to decide whether or not to invest in clusters were also shown.

Industrialization in Indonesia since the 1970s

Introduction: During the period from the latter half of the 1980s until just before the Asian currency crisis in 1997, Indonesia’s economic development had drawn expectations and attention from various quarters, along with Malaysia and Thailand within the same Association of Southeast Asian Nations (ASEAN). In fact, the 1993 report by the World Bank, entitled “East Asian Miracle: Economic Growth and Public Policy,” recognized Indonesia as one of the East Asian economies with the strong economic performance, i.e. sustained economic growth (World Bank [1993]). And it was the manufacturing industry that had been the driving force behind Indonesia’s economic growth during that period. Since the 1997 outbreak of the Asian currency crisis, however, the manufacturing sector in Indonesia has been mired in a situation that rules out the kind of bright prospects it had emanated previously. The Indonesian economy is still in the developing stage, and in accordance with the history of industrial structural changes in other countries, Indonesia’s manufacturing industry can still be expected to serve as the engine of the country’s economic development. But is it really possible in an environment where economic liberalization and globalization are forging ahead? And, what sort of problems have to be dealt with to make it possible? To answer these questions, it is necessary to know the current conditions of Indonesia’s manufacturing sector, and to do that, it becomes important to think back on the history of the country’s industrialization. Thus, this paper is intended to retrace and unlock the track of Indonesia’s industrialization up until the establishment of the manufacturing sector in its present form, with the ultimate goal being to give answers to the above-mentioned questions. Subject to an analysis in this paper is the period from the installment of President Soeharto’s administration onward when industrialization of the modern industrial sector2 moved into high gear. 　　　The composition of this paper is outlined below. Section 1 first shows why it is important to examine import substitution and export orientation, both of which are used as the measures of the analysis in this paper, in tracking the history of the industrialization, and then discuss indicators of import substitution and export orientation as well as statistical data and resources needed to develop those indicators. Section 2 clarifies the status of the manufacturing industry among all industries by looking at the composition ratio of the manufacturing industry in terms of value added, imports and exports. Section 3 to 5 cover three periods between 1971 and 1995 and make an analysis of import substitution, export orientation and changes in the industrial structure for each period. Section 3 analyzes the period from 1971 through 1985, when Indonesia pursued the import substitution policy amid the oil boom. Section 4 covers the period from 1985 through 1990, when the packages of deregulatory measures were announced successively under structural adjustment policies made necessary by the fall in oil prices. Section 5 examines the period from 1990 through 1995, which saw the alternate shifts between the overheating of the economy by sharply rising investment by both domestic and foreign investors in the wake of the liberalization of investment, trade and financial services, and polices to cool down the economy. Section 6, which covers the 1995-1999 period straddling the economic crisis, is designed for an analysis of the changes in production trends before and after the economic crisis as well as the changes in the industrial structure. Section 7, after summing up the history of Indonesia’s industrialization examined in the previous sections, discusses problems found in respective sectors and attempts to present future prospects for the country’s manufacturing industry.

Role of laboratories for adapting product-related environmental regulations (PRERs)

This paper examines how a country which has been successful in creating agglomeration of a manufacturing industry has faced various types of product-related environmental regulations. Then the paper shows how the government and testing laboratory have taken measures to adapt to PRERs overseas in response to the needs by firms affected by regulations. In reaction to the introductions of PRERs overseas, Malaysia also has introduced equivalent policies domestically, proving that PRERs have spread to Malaysia.

Role of laboratories for adapting product-related environmental regulations (PRERs)

This paper examines how a country which has been successful in creating agglomeration of a manufacturing industry has faced various types of product-related environmental regulations. Then the paper shows how the government and testing laboratory have taken measures to adapt to PRERs overseas in response to the needs by firms affected by regulations. In reaction to the introductions of PRERs overseas, Malaysia also has introduced equivalent policies domestically, proving that PRERs have spread to Malaysia.

Role of laboratories for adapting product-related environmental regulations (PRERs)

This paper examines how a country which has been successful in creating agglomeration of a manufacturing industry has faced various types of product-related environmental regulations. Then the paper shows how the government and testing laboratory have taken measures to adapt to PRERs overseas in response to the needs by firms affected by regulations. In reaction to the introductions of PRERs overseas, Malaysia also has introduced equivalent policies domestically, proving that PRERs have spread to Malaysia.

Role of laboratories for adapting product-related environmental regulations (PRERs)

This paper examines how a country which has been successful in creating agglomeration of a manufacturing industry has faced various types of product-related environmental regulations. Then the paper shows how the government and testing laboratory have taken measures to adapt to PRERs overseas in response to the needs by firms affected by regulations. In reaction to the introductions of PRERs overseas, Malaysia also has introduced equivalent policies domestically, proving that PRERs have spread to Malaysia.

Role of laboratories for adapting product-related environmental regulations (PRERs)

This paper examines how a country which has been successful in creating agglomeration of a manufacturing industry has faced various types of product-related environmental regulations. Then the paper shows how the government and testing laboratory have taken measures to adapt to PRERs overseas in response to the needs by firms affected by regulations. In reaction to the introductions of PRERs overseas, Malaysia also has introduced equivalent policies domestically, proving that PRERs have spread to Malaysia.

Diverging Development Paths of the Electronics Industry in Korea and Taiwan

This paper examines the process and mechanism of economic development in the Republic of Korea and Taiwan through a comparative analysis of the electronics industry in each country. The paper will show that in its initial stage of development, the electronics industry in both economies had the same type of dual structure: a domestic demand sector based on the protected domestic market, and an export sector intended to capitalize on low-wage labor for the international market. However, this dual structure in the two economies faded away after the mid-1970s as their respective indigenous export-oriented enterprises began to develop. But the primary industrial players in each economy were very different. In Korea they were comprehensive electronics manufacturers affiliated with chaebols, and in Taiwan they were small and medium-size enterprises. Differences in the two economies' development mechanisms have brought about this divergence in development paths. In Korea this mechanism has been characterized by the government's positive role and the chaebol's readiness to react to the government's leadership. In Taiwan the development mechanism has been based on the private sector independent from the government. As an extension of such diverged development paths, ICs and personal computers showed spectacular growth in Korea and Taiwan after the 1980s. The development of ICs in Korea was primarily the result of a decisive role played by the chaebol's sizable financial resources, while the competitiveness in personal computers largely reflected the agility and flexibility of Taiwanese small and medium-size enterprises.

The Impact of United States Sanctions on the Myanmar Garment Industry

The United States imposed trade sanctions against the military regime in Myanmar in July 2003. The import ban damaged the garment industry in particular. This industry exported nearly half of its products to the United States, and more than eighty percent of United States imports from Myanmar had been clothes. The garment industry was probably the main target of the sanctions. Nevertheless, the impact on the garment industry and its workers has not been accurately evaluated or closely examined. The purpose of this paper is to evaluate the impact of the sanctions and to further understand the present situation. This is done using several sources of information, including the author's field and questionnaire surveys. This paper also describes the process of selection and polarization underway in the garment industry, an industry that now has more severe competition fueled by the sanctions. Through such a process, the impact was inflicted disproportionately on small and medium-sized domestic firms and their workers.

International Competitiveness of Manufacturing Firms in sub-Saharan Africa

As the success of East Asian countries has shown, labor-intensive industry is recognized to lead economic growth in the early stages of development, utilizing relatively low labor costs. This same growth process has already started in South and South East Asian LDCs since the mid-1990s. However, the manufacturing sector in sub-Saharan Africa has been underdeveloped and manufacturing exports, in particular labour-intensive goods, have stagnated. This paper investigates the international competitiveness of the African manufacturing sector and its determinants through an analytical survey of empirical studies and a comparison with Asian low income countries. Empirical evidences indicate that primary factors of competitiveness, namely productivity, labour cost and exchange rate are unfavorable in sub-Saharan Africa. Representative arguments attribute the weak competitiveness to problems in the business environment, factor endowment, and the exchange rate. However, careful review shows that labour cost is beyond the range explained by endowment and misalignment of exchange rates have been reduced in Africa. Moreover, comparison with Asian low income countries which have competitiveness in labour-intensive goods shows no difference in the quality of business environment, while the labour cost is significantly lower than sub-Saharan African countries. Although results should be considered tentative, high labour cost beyond endowment and conservative investment behavior emerge as important factors for the weak competitiveness in sub-Saharan Africa when controlling income level.

A Divergent Path of Industrial Upgrading: Emergence and Evolution of the Mobile Handset Industry in China

Starting from almost null in the late 1990s, China's mobile phone handset industry has grown to account for more than 40 percent of the current world production. While export growth has been overwhelmingly led by multi-national corporations (MNCs), increasingly fierce competition in the domestic market ignited by the advent of local handset makers has induced unique industrial evolution: (1) outgrowth of independent design houses specialized in handset development and (2) emergence of IC fabless ventures that design core ICs for handsets. In the background of this evolutionary industrial growth there are factors such as, the scale and increasing diversity of China's domestic market that advantages local firms vis-a-vis MNCs; modularization of handset and semiconductor technologies; policy interventions that supports local startups. The emergence and evolution of China's handset industry is likely to have international implications as the growth of the global demand for low-cost and multi-function mobile phone handsets is expected to accelerate. Thus, our case suggests that the conventional view of latecomer industrialization and upgrading that emphasizes the key role of international production networks organized by MNCs needs to be modified in order to accommodate China's rise into perspective.

Causality Relationships between Total Exports with Agricultural and Manufacturing GDP in Tanzania

This paper, investigates causal relationships among agriculture, manufacturing and export in Tanzania by using time series data for the period between 1970 and 2005. The empirical results show in both sectors there is Granger causality where agriculture causes both exports and manufacturing. Exports also cause both agricultural GDP and manufacturing GDP and any two variables out of three jointly cause the third one. There is also some evidence that manufacturing does not cause export and agriculture. Regarding cointegration, pairwise agricultural GDP and export are cointegrated, export and manufacture are cointegrated. Agriculture and manufacture are cointegrated but they are lag sensitive. However, three variables, manufacturing, export and agriculture both together are cointegrated showing that they share long run relation and this has important economic implications.

Exploiting the Modularity of Value Chains: Inter-firm Dynamics of the Taiwanese Notebook PC Industry

This paper explores the inter-firm dynamics that govern the rise of capabilities of latecomer firms operating in global value chains. By extending and modifying the model proposed by Gereffi, Humphrey and Sturgeon [2005], I present a framework in which the rise of supplier capabilities is determined by interactions among the strategies of the firms. Based on a case study of the Taiwanese notebook PC industry, the paper will explore how the interactions among outsourcing strategies by lead firms from the developed countries, the learning strategies of Taiwanese suppliers, and the product strategy of powerful component vendors have driven the explosive growth of the industry after the 1990s. By so doing, the paper attempts to highlight the active roles firms play in determining the speed and direction of the rise in supplier capabilities.