Tariff reductions and labor demand elasticities : evidence from Chinese firm-level data

International production fragmentation has been a global trend for decades, becoming especially important in Asia where the manufacturing process is fragmented into stages and dispersed around the region. This paper examines the effects of input and output tariff reductions on labor demand elasticities at the firm level. For this purpose, we consider a simple heterogenous firm model in which firms are allowed to export their products and to use imported intermediate inputs. The model predicts that only productive firms can use imported intermediate inputs (outsourcing) and tend to have larger constant-output labor demand elasticities. Input tariff reductions would lower the factor shares of labor for these productive firms and raise conditional labor demand elasticities further. We test these empirical predictions, constructing Chinese firm-level panel data over the 2000--2006 period. Controlling for potential tariff endogeneity by instruments, our empirical studies generally support these predictions.

Estimation Technique of International Input-Output Model by Non-survey Method

The Asian International Input-Output (IO) Table that is compiled by Institute of Developing Economies-JETRO (IDE), was constructed in Isard type form. Thus, it required a lot of time to publish. In order to avoid this time-lag problem and establish a more simple compilation technique, this paper concentrates on verifying the possibility of using the Chenery-Moses type estimation technique. If possible, applying the Chenery-Moses instead of the Isard type would be effective for both impact and linkage analysis (except for some countries such as Malaysia and Singapore and some primary sectors. Using Chenery-Moses estimation method, production of the Asian International IO table can be reduced by two years. And more, this method might have the possibilities to be applied for updating exercise of Asian IO table.

Application of the Input-Output Decomposition Technique to China's Regional Economies

Structural decomposition techniques based on input-output table have become a widely used tool for analyzing long term economic growth. However, due to limitations of data, such techniques have never been applied to China's regional economies. Fortunately, in 2003, China's Interregional Input-Output Table for 1987 and Multi-regional Input-Output Table for 1997 were published, making decomposition analysis of China's regional economies possible. This paper first estimates the interregional input-output table in constant price by using an alternative approach: the Grid-Search method, and then applies the standard input-output decomposition technique to China's regional economies for 1987-97. Based on the decomposition results, the contributions to output growth of different factors are summarized at the regional and industrial level. Furthermore, interdependence between China's regional economies is measured and explained by aggregating the decomposition factors into the intraregional multiplier-related effect, the feedback-related effect, and the spillover-related effect. Finally, the performance of China's industrial and regional development policies implemented in the 1990s is briefly discussed based on the analytical results of the paper.

Evaluation of Non-Survey International IO Construction Methods with the Asian-Pacific Input-Output Table

This paper presents four non-survey methods to construct a full-information international input-output table from national IO tables and international import and export statistics, and this paper tests these four methods against the semi-survey international IO table for nine East-Asian countries and the USA, which is constructed by the Institute of Developing Economies in Japan. The tests show that the impact on the domestic flows of using self-sufficiency ratios is small, except for Singapore and Malaysia, two countries with large volumes of smuggling and transit trade. As regards the accuracy of the international flows, all methods show considerable errors, of 10%-40% for commodities and of 10%-70% for services. When more information is added, i.e. going from Method 1 to 4, the accuracy increases, except for Method 2 that generally produces larger errors than Method 1. In all, it seems doubtful whether replacing the semi-survey Asian-Pacific IO table with one of the four non-survey tables is justified, except when the semi-survey table itself is also considered to be just another estimate.

Empirical global value chain analysis in electronics and automobile industries :An application of Asian international input-output tables

This study aims to examine the international value distribution structure among major East Asian economies and the US. The mainstream trade theory explains the gains from trade; however, global value chain (GVC) approach emphasises uneven benefits of globalization among trading partners. The present study is mainly based on this view, examining which economy gains the most and which the least from the East Asian production networks. Two key industries, i.e., electronics and automobile, are our principle focus. Input-output method is employed to trace the creation and flows of value-added within the region. A striking fact is that some ASEAN economies increasingly reduce their shares of value-added, taken by developed countries, particularly by Japan. Policy implications are discussed in the final section.

A New Measurement for International Fragmentation of the Production Process: An International Input-Output Approach

The paper investigates the possibility of constructing a new measurement for analysing international fragmentation of the production process. It asserts that the current usage of relevant data, whether the trade shares of parts and components or the index of Vertical Specialisation, is quite unsatisfactory for measuring the phenomenon, since they critically lack the overall perspective of the entire structure of production chains. 　The new measurement is formulated such that it captures every aspect of the vertical sequence of production linkages. It is based on the input-output model of Average Propagation Lengths, recently developed by Eric Dietzenbacher and others, which show the average number of production stages that are passed through for an exogenous change in one industry to affect another. By applying this model to the data of the Asian International Input-Output Tables, the index is able to measure the international dimension of production sharing and division of labour in East Asia.

Input-Output Based Economic Impact Evaluation System for Small City Development: A Case Study on Saemangeum's Flux City Design

The paper aims to develop a quasi-dynamic interregional input-output model for evaluating the macro-economic impacts of small city development. The features of the model are summarized as follows: (1) the consumption expenditure of households is regarded as an endogenous variable, (2) the technological change is determined by the change of industrial Location Quotient caused by firm's investment activities. (3) a strong feedback function between the city design and the economic analysis is provided. For checking the performance of the model, Saemangeum's Flux City Design Plan is used as the simulation target in our paper.

Production Networks and Spatial Economic Interdependence: An International Input-Output Analysis of the Asia-Pacific Region

The Asia-Pacific Region has enjoyed remarkable economic growth in the last three decades. This rapid economic growth can be partially attributed to the global spread of production networks, which has brought about major changes in spatial interdependence among economies within the region. By applying an Input-Output based spatial decomposition technique to the Asian International Input-Output Tables for 1985 and 2000, this paper not only analyzes the intrinsic mechanism of spatial economic interdependence, but also shows how value added, employment and CO2 emissions induced are distributed within the international production networks.

Shock Transmission Mechanism of the Economic Crisis in East Asia : An Application of International Input-Output Analysis

This paper investigates the impacts of the 2008 economic crisis on industries in East Asia. By using the updated Asian international input-output table for 2008, the paper attempts to identify the transmission mechanism and the magnitude of impact of the crisis on industries in East Asia. The analyses reveal that the crisis significantly affected industrial output of the nine East Asian countries. In particular, the countries which are deeply involved in production networks were affected most seriously. Moreover, the analyses show that the impact was transmitted to East Asian industries considerably through the “triangular trade”, in which China imports parts and components from neighboring East Asian countries and then exports final products to the U.S. and EU markets.

Vertical specialisation indicator based on supply-driven input-output model

“Import content of exports”, based on Leontief’s demand-driven input-output model, has been widely used as an indicator to measure a country’s degree of participation in vertical specialisation trade. At a sectoral level, this indicator represents the share of inter-mediates imported by all sectors embodied in a given sector’s exported output. However, this indicator only reflects one aspect of vertical specialisation – the demand side. This paper discusses the possibility of using the input-output model developed by Ghosh to measure the vertical specialisation from the perspective of the supply side. At a sector level, the Ghosh type indicator measures the share of imported intermediates used in a sector’s production that are subsequently embodied in exports by all sectors. We estimate these two indicators of vertical specialisation for 47 selected economies for 1995, 2000, 2005 using the OECD’s harmonized input-output database. In addition, the potential biases of both indicators due to the treatment of net withdrawals in inventories, are also discussed.

Measuring global value chains and regional economic integration : an international input-output approach

Firms that are expanding their cross-border activities, such as vertical specialization trade, outsourcing, and fragmentation productions, have brought dramatic changes to the global economy during the last two decades. In an attempt to understand the evolution of the interaction among countries or country groups, many trade-statistics-based indicators have been developed. However, most of these statistics focus on showing the direct trade-specific-relationship among countries, rather than considering the roles that intercountry and interindustrial production networks play in a global economy. This paper uses the concepts of trade in value added as measured by the input–output tables of OECD and IDE-JETRO to provide alternative indicators that show the evolution of regional economic integration and global value chains for more than 50 economies. In addition, this paper provides thoughts on how to evaluate comparative advantages on the basis of value added using an international input–output model.

China's regional economies and value chains : an interregional input-output analysis

Attempts to understand China’s role in global value chains have often noted the case of Apple's iPhone production, in particular the fact that the value added during the Chinese portion of the iPhone’s supply chain is no more than 4%. However, when we examine the Chinese economy as a whole in global production networks, China’s share in total induced value added by China’s exports of final products to the USA is about 75% in 2005. This leads us to investigate how Chinese value added is created and distributed not only internationally but also domestically. To elucidate the increasing complexity of China’s domestic production networks, this paper focuses on the measure of Domestic Value Chains (DVCs) across regions and their linkages with global markets. By using China’s 1997 and 2007 interregional input-output tables, we can understand in detail the structural changes in domestic trade in terms of value added, as well as the position and degree of participation of different regions within the DVCs.

Compilation, application and challenge of IDE-JETRO's International Input-Output tables

International input-output tables are among the most useful tools for economic analysis. Since these tables provide detailed information about international production networks, they have recently attracted considerable attention in research on spatial economics, global value chains, and issues relating to trade in value-added. The Institute of Developing Economies at the Japan External Trade Organization (IDE-JETRO) has more than 40 years of experience in the construction and analysis of international input-output tables. This paper explains the development of IDE-JETRO’s multi-regional input-output projects including the construction of the Asian International Input-Output table and the Transnational Interregional Input-Output table between China and Japan. To help users understand the features of the tables, this paper also gives examples of their application.

Input-output-based genuine value added and genuine productivity in China's industrial sectors (1995-2010)

The rapid growth of China's economy has brought about huge losses of natural capital in the form of natural resource depletion and damages from carbon emissions. This paper recalculates value added, capital formation, capital stock, and related multifactor productivity in China's industrial sectors by further developing the genuine savings method of the World Bank. The sector-level natural capital loss was calculated using China's official input–output table and their extensions for tracing final consumers. The capital output elasticity in the productivity estimation was adjusted based on these tables. The results show that although the loss of natural capital in China's industrial sectors in terms of value added has slowed, the impacts on their productivity during the past decades is still quite clear.

Using the input-output approach to measure participation in GVCs : the case of Costa Rica

In order to illustrate how the input-output approach can be used to explore various aspects of a country's participation in GVCs, this paper applies indicators derived from the concept of trade in value-added (TiVA) to the case of Costa Rica. We intend to provide developing countries that seek to foster GVC-driven structural transformation with an example that demonstrates an effective way to measure progress. The analysis presented in this paper makes use of an International Input-Output Table (IIOT) that was constructed by including Costa Rica's first Input-Output Table (IOT) into an existing IIOT. The TiVA indicator has been used to compare and contrast import flows, export flows and bilateral trade balances in terms of gross trade and trade in value-added. The country's comparative advantage is discussed based on a TiVA-related indicator of revealed comparative advantage. The paper also decomposes the domestic content of value added in each sector and measures the degree of fragmentation in the value chains in which Costa Rica participates, highlighting the partner countries that add the most value.