Physical properties of ODP Leg 178 sites

We have reanalyzed the porosity, bulk density, and seismic velocity information collected from continental rise Sites 1095, 1096, and 1101 during the drilling of Ocean Drilling Program (ODP) Leg 178 (Fig. F1). The purpose is to provide a comprehensive composite digital set of data readily available for future studies aimed at well-seismic correlation. The work originates from the occurrence of overlapping sets of physical parameters and acoustic velocity collected by different methods (downhole logging, core logging, laboratory determination, and derivation from seismic data) and from different holes at the same site. These data do not always provide the same information because of difficulties encountered at each specific hole or methodological differences. In addition, a basic correlation between these parameters and onsite multichannel seismic (MCS) data is presented.

Physical oceanography and ADCP measurements during METEOR cruise M71/3

Work on M71-3 aimed to answer the question whether phosphate loss and incomplete utilisation of nitrate on the one hand, or dinitrogen fixation on the other hand are responsible for unusual nutrient ratios in the water column of the eastern Mediterranean Sea. We investigated the reason for unusually depleted 15N/14N ratios in dissolved nitrate, suspended matter and surface sediments of that oligotrohic ocean basin. During a total of 18 days of ship time on R/V METEOR, Leg 3 OF M71 performed water column and surface sediment work in the eastern Mediterranean Sea (Heraklion-Istanbul). Stations will be aligned on one E-W and two N-S transects and sampled all major basins and water masses. On stations, CTD casts were obtained and water samples for nutrient concentrations were taken. These samples and those of suspended matter and surface sediment will be analysed for the stable nitrogen isotope composition of dissolved nitrate, suspended matter, and surface sediments. In addition, phytoplankton samples were be taken and experiments were be carried out to determine N2 fixation rates, genetic expressions of nitrogen fixation, and the composition of microbial and algal assemblages. One mooring of sediment traps (Ierapetra Deep) was be deployed and will be recovered in September 2007 to monitor changes in particle flux and its isotope signature over a seasonal cycle.

Physical properties, velocity and attenuation characteristics, and mineralogy of gabbros from ODP Hole 176-735B

Laboratory compressional wave (Vp) and shear wave (Vs) velocities were measured as a function of confining pressure for the gabbros from Hole 735B and compared to results from Leg 118. The upper 500 m of the hole has a Vp mean value of 6895 m/s measured at 200 MPa, and at 500 meters below seafloor (mbsf), Vp measurements show a mean value of 7036 m/s. Vs mean values in the same intervals are 3840 m/s and 3857 m/s, respectively. The mean Vp and Vs values obtained from log data in the upper 600 m are 6520 and 3518 m/s, respectively. These results show a general increase in velocity with depth and the velocity gradients estimate an upper mantle depth of 3.32 km. This value agrees with previous work based on dredged samples and inversion of rare element concentrations in basalts dredged from the conjugate site to the north of the Atlantis Bank. Laboratory measurements show Vp anisotropy ranging between 0.4% and 8.8%, with the majority of the samples having values less than 3.8%. Measurements of velocity anisotropy seem to be associated with zones of high crystal-plastic deformation with predominant preferred mineral orientations of plagioclase, amphiboles, and pyroxenes. These findings are consistent with results on gabbros from the Hess Deep area and suggest that plastic deformation may play an important role in the seismic properties of the lower oceanic crust. In contrast to ophiolite studies, many of the olivine gabbros show a small degree of anisotropy. Log derived Vs anisotropy shows an average of 5.8% for the upper 600 m of Hole 735B and tends to decrease with depth where the overburden pressure and the age of the crustal section suggests closure of cracks and infilling of fractures by alteration minerals. Overall the results indicate that the average shear wave splitting in Hole 735B might be influenced by preferred structural orientations and the average value of shear wave splitting may not be a maximum because structural dips are <90°. The maximum fast-wave orientation values could be influenced by structural features striking slightly oblique to this orientation or by near-field stress concentrations. However, flexural wave dispersion analyses have not been performed to confirm this hypothesis or to indicate to what extent the near-field stresses may be influencing shear wave propagation. Acoustic impedance contrasts calculated from laboratory and logging data were used to generate synthetic seismograms that aid in the interpretation of reflection profiles. Several prominent reflections produced by these calculations suggest that Fe-Ti oxides and shear zones may contribute to the reflective nature of the lower oceanic crust. Laboratory velocity attenuation (Q) measurements from below 500 m have a mean value of 35.1, which is consistent with previous vertical seismic profile (VSP) and laboratory measurements on the upper 500 m.

Physical oceanography and ADCP measurements during POSEIDON cruise P414 (POS414)

Until the eighties the main source of deep water masses in the Ionian Basin was the southern Adriatic Sea. During the nineties a dramatic climatic change took place in the eastern Mediterranean (Eastern Mediterranean Transient); deep water was formed of water originating from the Aegean Sea since then. This change in the deep water had extensive consequences for the whole circulation of the eastern Mediterranean Sea. Expeditions carried out in this region during the last years indicate now that the process of deep water formation might reverse again. The process of this re-reversing deep water formation is a long-term one. Therefore, the characteristics of the today's deep water masses in the Ionian Basin, to which extent these characteristics differ from the deep water masses before the EMT and in which state the re-reversed Eastern Mediterranean deep water circulation is now, must be investigated continuously. The Adriatic deep water finds its way to the Ionian Basin on several routes with different entrainments rates. The entrainment rates might be a deciding factor for the Deep Ionian Waters and the resulting density might influence the role of the Aegean Deep Water for the Ionian Deep Waters as well. Therefore, it is crucial to identify and quantify the routes and entrainment rates of the Adriatic Deep Water. The cruise carried out is a continuation of the work carried out during the cruises POS298, M71/3, MSM13/2, MSM15/4 and M84/3. The objective is to investigate the spatial and temporal variability of dispersion and mixing of the Ionian Deep Water. During the cruise CTD stations were carried out and samples for nutrient, oxygen and oxygen isotopes were taken. Continously measurements were made with the vessel mounted ADCP and thermosalinograph. Additionally, on the cruise students were trained on the use of oceanographic equipment.

Physical oceanography during POLARSTERN cruise ANT-V/3

The work carried out by the physical oceanography group on POLARSTERN Leg ANT-V/3 concentrated on four major topics: A. A large scale survey of the eastern boundary between the Weddell gyre and the open ocean. On the way to the coastal polynya in early October 12 CTD stations were carried out between 54°30'S, 6°E and 70°30'S 8°W. Another set of 16 stations was obtained in early December on the way back north. During this transsect three current meter moorings were recovered at Maud Rise. The path between the current meter arrays was used to run an additional section to the NNE across the top of Maud Rise. B. A large scale survey of the Antarctic Coastal Current along the eastern shelf area. To obtain the water mass characteristics along the eastern Weddell shelf 36 CTD stations were carried out between Atka Bay and the Filchner Trench. Most of the stations were located on the shelf. Cross shelf sections were obtained both near Drescher Inlet and off Halley Bay, in the divergence area of the Coastal Current where the continental slope turns to the west and south of Vestkapp at Neptune's Point. A longshore section over 120 km was run north of Vestkapp. C. A mesoscale survey of the Antarctic Coastal Current off Drescher Inlet. The experimental work consisted of 37 CTD-stations and direct current measurements. The CTD-profiles were grouped into seven sections perpendicular to the coast line off Drescher Inlet extending once over 70 km but normally over 35 km. The profile depth ranged from 300 m on one section to the complete water column at two sections. Most sections consist of five stations providing highest resolution over the upper continental slope with offshore increasing spacing. The stations were chosen to represent the shelf (450 m), the shelf break (800 m), the upper slope (1600 m), the lower slope (2400 m) and the transition to the abyssal plain (3400 m). Rough topography and difficult ice conditions made it impossible to meet those requirements in all cases. D. A small scale survey of the hydrographic conditions under the sea ice. The motivation for these studies arose during the cruise. Consequently a suitable Instrumentation had to be developed at sea. This was done with a NB-Smart CTD which was inserted on an L-shaped lever through a hole in the ice. However, various water intrusions into the instrument resulted in the failure of this technique. In consequence a special lever system was built to position a NB Mark 3b weighing about 40 kg below the ice. Twenty four profiles were obtained reaching from the bottom of the ice down to 2 m below the ice surface with a maximum distance of 1 m from the entry hole. As the conductivity sensor was influenced by nearby ice platelets, salinity samples where drawn to check the sensor.