(Table 1) GRACE-derived mass balance of the Greenland ice sheet 2002-2010

We re-evaluate the Greenland mass balance for the recent period using low-pass Independent Component Analysis (ICA) post-processing of the Level-2 GRACE data (2002-2010) from different official providers (UTCSR, JPL, GFZ) and confirm the present important ice mass loss in the range of -70 and -90 Gt/y of this ice sheet, due to negative contributions of the glaciers on the east coast. We highlight the high interannual variability of mass variations of the Greenland Ice Sheet (GrIS), especially the recent deceleration of ice loss in 2009-2010, once seasonal cycles are robustly removed by Seasonal Trend Loess (STL) decomposition. Interannual variability leads to varying trend estimates depending on the considered time span. Correction of post-glacial rebound effects on ice mass trend estimates represents no more than 8 Gt/y over the whole ice sheet. We also investigate possible climatic causes that can explain these ice mass interannual variations, as strong correlations between GRACE-based mass balance and atmosphere/ocean parallels are established: (1) changes in snow accumulation, and (2) the influence of inputs of warm ocean water that periodically accelerate the calving of glaciers in coastal regions and, feed-back effects of coastal water cooling by fresh currents from glaciers melting. These results suggest that the Greenland mass balance is driven by coastal sea surface temperature at time scales shorter than accumulation.

Current meter data from mooring stations in the English Channel (Table 1)

A new technique for the harmonic analysis of current observations is described. It consists in applying a linear band pass filter which separates the various species and removes the contribution of non-tidal effects at intertidal frequencies. The tidal constituents are then evaluated through the method of least squares. In spite of the narrowness of the filter, only three days of data are lost through the filtering procedure and the only requirement on the data is that the time interval between samples be an integer fraction of one day. This technique is illustrated through the analysis of a few French current observations from the English Channel within the framework of INOUT. The characteristics of the main tidal constituents are given.

First results from stable-istope measurements on ice cores from Dronning Maud Land

The European Project for Ice Coring in Antarctica (EPICA) focuses on the drilling of two deep ice cores, the first at Dome C and the second at Kohnen station (75°00' S, 0°04' E) in Dronning Maud Land (DML). This paper deals with stable-isotope records from ice cores drilled in DML. In the first season, the deep EPICA DML core reached a depth of 450 m, recovering ice approximately 7000 years old. Generally, the d18O record indicates a stable Holocene climate and shows low variability. However, during the last 4000 years (based on a preliminary time-scale) the d18O values decrease continuously by about 0.6%, and the deuterium excess values increase by about 0.5%. The correlation between d18O and the deuterium excess d is investigated for a 50m long core section and the near-surface snow. High-pass filtered profiles are positively correlated, whereas the correlation between low-pass filtered profiles is negative. A post-depositional effect due to diffusion processes can be seen in a sub-annually resolved profile from snow-pit samples. Changes in the seasonality of the evolution of the snow cover and the consequences for stable-isotope content are demonstrated with data from ice core B31.

Seismic Data from MSM21/4 to Knipovich Ridge on the western Svalbard margin

The seismic data were acquired north of the Knipovich Ridge on the western Svalbard margin during cruise MSM21/4. They were recorded using a Geometrics GeoEel streamer of either 120 channels (profiles p100-p208) or 88 channels (profiles p300-p805) with a group spacing of 1.56 m and a sampling rate of 2 kHz. A GI-Gun (2×1.7 l) with a main frequency of ~150 Hz was used as a source and operated at a shot interval of 6-8 s. Processing of profiles p100-p208 and p600-p805: Positions for each channel were calculated by backtracking along the profiles from the GI-Gun GPS positions. The shot gathers were analyzed for abnormal amplitudes below the seafloor reflection by comparing neighboring traces in different frequency bands within sliding time windows. To suppress surface-generated water noise, a tau-p filter was applied in the shot gather domain. Common mid-point (CMP) profiles were then generated through crooked-line binning with a CMP spacing of 1.5625 m. A zero-phase band-pass filter with corner frequencies of 60 Hz and 360 Hz was applied to the data. Based on regional velocity information from MCS data [Sarkar, 2012], an interpolated and extrapolated 3D interval velocity model was created below the digitized seafloor reflection of the high-resolution streamer data. This velocity model was used to apply a CMP stack and an amplitude-preserving Kirchhoff post-stack time migration. Processing of profiles p400-p500: Data were sampled at 0.5 ms and sorted into common midpoint (CMP) domain with a bin spacing of 5 m. Normal move out correction was carried out with a velocity of 1500 m s-1 and an Ormsby bandpass filter with corner frequencies at 40, 80, 600 and 1000 Hz was applied. The data were time migrated using the water velocity.

(Table T4) Final depth vs. velocity and two-way traveltime data, ODP Site 178-1103

Site 1103 was one of a transect of three sites drilled across the Antarctic Peninsula continental shelf during Leg 178. The aim of drilling on the shelf was to determine the age of the sedimentary sequences and to ground truth previous interpretations of the depositional environment (i.e., topsets and foresets) of progradational seismostratigraphic sequences S1, S2, S3, and S4. The ultimate objective was to obtain a better understanding of the history of glacial advances and retreats in this west Antarctic margin. Drilling the topsets of the progradational wedge (0-247 m below seafloor [mbsf]), which consist of unsorted and unconsolidated materials of seismic Unit S1, was very unfavorable, resulting in very low (2.3%) core recovery. Recovery improved (34%) below 247 mbsf, corresponding to sediments of seismic Unit S3, which have a consolidated matrix. Logs were only obtained from the interval between 75 and 244 mbsf, and inconsistencies on the automatic analog picking of the signals received from the sonic log at the array and at the two other receivers prevented accurate shipboard time-depth conversions. This, in turn, limited the capacity for making seismic stratigraphic interpretations at this site and regionally. This study is an attempt to compile all available data sources, perform quality checks, and introduce nonstandard processing techniques for the logging data obtained to arrive at a reliable and continuous depth vs. velocity profile. We defined 13 data categories using differential traveltime information. Polynomial exclusion techniques with various orders and low-pass filtering reduced the noise of the initial data pool and produced a definite velocity depth profile that is synchronous with the resistivity logging data. A comparison of the velocity profile produced with various other logs of Site 1103 further validates the presented data. All major logging units are expressed within the new velocity data. A depth-migrated section with the new velocity data is presented together with the original time section and initial depth estimates published within the Leg 178 Initial Reports volume. The presented data confirms the location of the shelf unconformity at 222 ms two-way traveltime (TWT), or 243 mbsf, and allows its seismic identification as a strong negative and subsequent positive reflection.