Uppermost Jurassic to lower Cretaceous benthic foraminifera from ODP Hole 123-765C

Benthic foraminifers were studied in 99 samples collected from the lower 200 m of Hole 765C. The studied section ranges from the Tithonian to Aptian, and benthic foraminifers can be subdivided into five assemblages on the basis of faunal diversity and stratigraphic ranges of distinctive species. Compared with deep-water assemblages from Atlantic DSDP sites and Poland, assemblages from the Argo Abyssal Plain display a higher diversity of agglutinated forms, which comprise the autochthonous assemblages. Assemblages at the base of Hole 765C are wholly composed of agglutinated forms, reflecting deposition beneath the carbonate compensation depth (CCD). Most calcareous benthic species are found in turbidite layers, and the presence of an upper Valanginian Praedorothia praehauteriviana Assemblage may indicate deposition at or just below the CCD. The P. praehauteriviana Assemblage from Hole 765C is the temporal equivalent of similar assemblages from DSDP Holes 534A, 416A, 370, 105, and 101 in the Atlantic Ocean and Hole 306 in the Pacific Ocean. Stratigraphic ranges of cosmopolitan agglutinated species at Site 765 generally overlap with their reported ranges in the Atlantic and in the bathyal flysch sequences of the Carpathians; however, several species from Hole 765C have not been previously reported from Uppermost Jurassic to Lower Cretaceous abyssal sediments.

Chemical composition of ferromanganese nodules from the Black Sea

Ferruginate shells and tubular worm burrows from the oxygenated zone of the Black Sea (Kalamit Bay and Danube River mouth) are studied by transmission and scanning electron microscopy combined with analyses of elemental composition. Iron and manganese oxyhydroxide nodules considered here are enriched in phosphorus. They contain variable amounts of terrigenous and biogenic material derived from host sediments. Oxyhydroxides are mainly characterized by colloform structure, whereas globular and crystalline structures are less common. The dominating iron phase is represented by ferroxyhite and protoferroxyhite, whereas the manganese phase is composed of Fe-free vernadite. Concentrations of Mn, As, and Mo are 12-18 times higher relative to sediments, while concentrations of Fe, P, Ni, and Co increase 5-7 times during nodule formation.

Chemical composition of Fe-Mn ores from the North Pacific seamounts

Ore crusts from the Mid-Pacific Seamounts were studied by scanning electron microscopy and by atomic-absorption and chemical analysis. Characteristic ultramicroscopic structures of ore material of these crusts are globular, fibrous, conchoidal and cellular. Non-ore components are represented by fragments of bedrocks, zeolites, biogenic carbonates, and apatite. Contents of ore elements are: Fe 5.53-15.82%; Mn 14.92-23.45%; Co 0.32-0.82%; Ni 0.22-0.70%; Cu 0.02-0.12%, Mn/Fe ratio varies from 1.02 to 3.39. In general elevated contents of Co (>0.55%) in Fe-Mn crusts correspond to elevated (>1) Mn/Fe ratios.

(Table 1) Crystal sizes of measured samples

Due to experimental difficulties grain size distributions of gas hydrate crystallites are largely unknown in natural samples. For the first time, we were able to determine grain size distributions of six natural gas hydrates for samples retrieved from the Gulf of Mexico and from Hydrate Ridge offshore Oregon from varying depths. High-energy synchrotron radiation provides high photon fluxes as well as high penetration depth and thus allows for investigation of bulk sediment samples. The gas hydrate crystallites appear to be (log-) normally distributed in the natural samples and to be of roughly globular shape. The mean grain sizes are in the range from 300-600 µm with a tendency for bigger grains to occur in greater depth, possibly indicating a difference in the formation age. Laboratory produced methane hydrate, starting from ice and aged for 3 weeks, shows half a log-normal curve with a mean value of ~40 µm. This one order-of-magnitude smaller grain sizes suggests that care must be taken when transposing grain-size sensitive (petro-)physical data from laboratory-made gas hydrates to natural settings.

Organic carbon and amino acid concentration of Karelian shungite rocks from the lake Onego area, Russia

The study of amino acids in the Precambrian shungite rocks of Karelia showed that their contents vary within 25-89 µg/g depending on proportions between shungite and mineral components. It was established that the amino acids exhibit an excess of L-enantiomers. In the shungite rocks, they form organomineral complexes with silica and aluminosilicates, being built in the globular structure of shungite matter. There are several sources of amino acids in shungites: secondary synthesis, microbial pollution, and original amino acids of organic matter in shungite rocks.

(Table 1) Distribution of Lower Cretaceous calcareous nannofossils at DSDP Hole 93-603B

Upper Berriasian to lower Aptian calcareous nannofossil assemblages have been studied from a siliciclastic deep-sea fan complex and a subjacent limestone sequence drilled beneath the lower continental rise in the western North American Basin, 270 miles (435 km) off Cape Hatteras, North Carolina (USA). Sharp lithologic facies changes and reworking by turbidites complicate the biostratigraphic interpretation, but provide an excellent opportunity to better distinguish "nearshore" from open-ocean nannofossil species, and to investigate the introduction of neritic taxa into the deep-see environment, a phenomenon that appears to have been widespread within the circum-North Atlantic during Neocomian times. Well-preserved assemblages in dark, carbonaceous claystones were probably displaced from the oxygen minimum zone along the upper slope or outer shelf. Neritic, continental margin species prevalent in this facies include the holococcolith Zebrashapka vanhintei n. gen., n. sp., Lithraphidites alatus magnus n. spp., Pickelhaube furtiva n. gen., and a host of nannoconids and micrantholiths. A qualitative evaluation of widely used guide fossils suggests that the triad of proposed markers for the base of Roth's Zone NC3 make their first appearances in the following (ascending) order: Diadorhombus rectus, TUbodiscus verenae, Calcicalathina oblongata. Of these, we chose the nominative species for the zone, T. verenae, to mark its base and to approximate the Berriasian/Valangian boundary. Cyclagelosphaera deflandrei is strongly affected by diagenesis and is therefore not a reliable index species for the base of Zone NC4 near the Valanginian/Hauterivian boundary (the last occurrence of T. verenae is also not suitable there). In addition, Lithraphidites bollii, a form apparently confined to the low latitudes of the Tethyan region, was absent at the more temperate Site 603 and not available as a subzonal marker for the upper Hautervian-lower Barremian (mid-NC4 and mid-NC5, respectively). Cruciellipsis cuvillieri, however, provides a reliable datum just below the Hauterivian/Barremian boundary (base of NC5), despite the potential for reworking in this section. Nannoconids tend to be reworked in this section, and do not provide trustworthy forms to mark the Barremian/Aptian boundary (base of NC6). Hayesites irregularis n. comb, probably does provide a useful first appearance datum within the lower Aptian, if it is not confused with a more birefringent and globular form, Rucinolithus terebrodentarius n. sp. Rhagodiscus angustus is mimicked by a similar form (Zeughrabdotusl pseudoangustus n. sp.), which apparently ranges down to the Hauterivian, thus Lithastrinus floralis provides a more useful first appearance datum for the base of the middle-upper Aptian Rhagodiscus angustus Zone (NC7). Aside from the new taxa mentioned above, the following are also described: Cretarhabdusl delicatus n. sp. and Cyclagelosphaera jiangii n. sp.

(Table 1) Crystal sizes of measured samples from the Bush Hill region in the Gulf of Mexico and from ODP Leg 204 at the Hydrate Ridge offshore Oregon

The grain sizes of gas hydrate crystallites are largely unknown in natural samples. Single grains are hardly detectable with electron or optical microscopy. For the first time, we have used high-energy synchrotron diffraction to determine grain sizes of six natural gas hydrates retrieved from the Bush Hill region in the Gulf of Mexico and from ODP Leg 204 at the Hydrate Ridge offshore Oregon from varying depth between 1 and 101 metres below seafloor. High-energy synchrotron radiation provides high photon fluxes as well as high penetration depth and thus allows for investigation of bulk sediment samples. Gas hydrate grain sizes were measured at the Beam Line BW 5 at the HASYLAB/Hamburg. A 'moving area detector method', originally developed for material science applications, was used to obtain both spatial and orientation information about gas hydrate grains within the sample. The gas hydrate crystal sizes appeared to be (log-)normally distributed in the natural samples. All mean grain sizes lay in the range from 300 to 600 µm with a tendency for bigger grains to occur in greater depth. Laboratory-produced methane hydrate, aged for 3 weeks, showed half a log-normal curve with a mean grain size value of c. 40 µm. The grains appeared to be globular shaped.

Early Cretaceous planktonic foraminifera from the Tethys

Early Cretaceous planktonic foraminiferal assemblages include rare planispiral and pseudoplanispiral morphotypes with elongate chambers that BouDagher-Fadel et al. assigned to Schackoina or accommodated in the new genus Claviblowiella. New findings of well-preserved planktonic foraminiferal faunas from the Lesches en Diois (SE France) section, the Cismon core (NE Italy), the Calabianca (NW Sicily) section and the Upper Aptian of Deep Sea Drilling Project (DSDP) Site 545 drilled off Morocco, have allowed a better understanding of the morphological features of these rare, unevenly distributed taxa. Our data demonstrate that each small planispiral species with globular chambers has a corresponding "clavate" morphotype which (as the "normal" forms) exhibits a smooth, finely perforate wall. Consequently, the latter have been assigned here to the genus Globigerinelloides and treated as subspecies of the "non-clavate" taxa. The (clavate) subspecies belonging to the genus Globigerinelloides here retained are G. duboisi sigali Longoria, G. maridalensis elongatus subsp. nov., G. blowi lobatus subsp. nov. and G. paragottisi clavatus subsp. nov., while Globigerinelloides minai Obregòn de la Parra is not retained. In addition, a new genus, Pseudoschackoina, type species Planomalina saundersi Bolli (senior synonym of Hastigerinoides cepedai Obregòn de la Parra, has been formalised for individuals possessing elongate, pointed, laterally compressed chambers, bearing tubulospines arranged on a pseudoplanispiral (dysaxial) coiling mode. Stratigraphically, in the sections studied the first taxon to appear is Pseudoschackoina saundersi, in the uppermost part of the Selli Level (=OAE1a), immediately followed, just above the OAE1a, by all the "clavate" globigerinelloidids. Regarding the last occurrences, Pseudoschackoina saundersi and G. maridalensis elongatus disappear in the lower part of the Globigerinelloides algerianus Zone, Globigerinelloides paragottisi clavatus at the top of the same zone, while Globigerinelloides blowi lobatus and G. duboisi sigali range up to the lower part of the Ticinella bejaouaensis Zone.

Cladoceran functional assemblages and functional diversity indices from Mallusjärvi and Tiiläänjärvi (southern Finland) sediment cores

will be submitted by the author

Description and composition iron-manganese concretions from the Pacific

One the most interesting features of ocean sedimentation is the manganese formations on the surface of the ocean floor in some areas. These are especially widespread in the Pacific Ocean as concretions, grains, and crusts on rock fragments and bedrock outcrops. Iron-manganese concretions are the most abundant as they completely cover about 10% of the bottom of the Pacific Ocean where there are ore concentrations. The concretions occupy from 20-50% of the bottom and up to 80-90% on separate submarine rises. Such concretions are found in different types of bottom deposits, from abyssal red clays to terrigenous muds, but they occur most widely in red clays and quite often in carbonate muds. Their shape and their dimensions are very diverse and change from place to place, from station to station, varying from 0.5-20 cm. They may be oval, globular, reniform, or slaggy and often they are fiat or isometric concretions of an indefinite shape. The concretions generally have nuclei of pumice, basalt fragments, clayey and tuffaceous material, sharks' teeth, whale ossicles, and fossil sponges. Most concretions have concentric layers, combined with dendritic ramifications of iron and manganese oxides.

Table 1. Concentration of rare earth elements in ferromanganese nodule (crust), sediment and rock of the South China Sea

Based on the X-ray fluorescence spectrum analysis of 15 rare earth elements in 6 ferromanganese nodu1es and 5 ferro mangane se crusts from the South China Sea, their abundances, distribution patterns, sources and relationships with associated elements are discussed in detail in this paper. The results show that: 1) The average abundance of rare earth elements in ferromanganese nodu1es and crusts is 1. 625 g/kg and 2. 167 g/kg respectively, which is 1-2 tim es , 5-6 times and 15-20 times higher than that in the Pacific, in the sediments of the North Pacific and the South China Sea, respectively; 2) The distribution patterns of rare earth elements standardized by the globular aerolite in ferro mangane se nodules and crusts are basically similar, that is, Ce is positively abnormal and Eu is in deficit slightly; 3) The relationships between rare earth elements and associated elements, sediments and rocks show that the source of rare earth elements in ferromanganese nodules and crusts have mainly come from slow deposition caused by weathering and leaching of medium acidic rock of the South China Sea.