(Table 1) Density values of ODP Leg 126 samples

Sediment dry-bulk density values are essential components of mass accumulation rate calculations. This manuscript presents three equations to calculate dry-bulk density from laboratory measurements of physical properties that have been corrected for the salt content of the pore fluid. In addition, two equations for use with values not corrected for salt content are included. Derivations of the equations from first principles are presented. The second part of the manuscript briefly examines laboratory measurements of the various properties used in the dry-bulk density equations. A discussion of the problems inherent in the density measurements and recommendations are included. This work represents the first comprehensive compilation of equations of dry-bulk density and should prove useful to all scientists who investigate accumulation rates.

Sediment geochemistry of ODP Leg 127 sites

The relative effects of paleoceanographic and paleogeographic variations, sediment lithology, and diagenetic processes on the final preserved chemistry of Japan Sea sediments are evaluated by investigating the rare earth element (REE), major element, and trace element concentrations in 59 squeeze-cake whole-round and 27 physical-property sample residues from Sites 794, 795, and 797, cored during ODP Leg 127. The most important variation in sedimentary chemical composition is the increase in SiO2 concentration through the Pliocene diatomaceous sequences, which dilutes most other major and trace element components by various degrees. This biogenic input is largest at Site 794 (Yamato Basin), moderately developed at Site 797 (Yamato Basin), and of only minor importance at Site 795 (Japan Basin), potentially reflecting basinal contrasts in productivity with the Yamato Basin recording greater biogenic input than the Japan Basin and with the easternmost sequence of Site 794 lying beneath the most productive waters. There are few systematic changes in solid-phase chemistry resulting from the opal-A/opal-CT or opal-CT/quartz silica phase transformations. Most major and trace element concentrations are controlled by the aluminosilicate fraction of the sediment, although the effects of diagenetic silica phases and manganese carbonates are of localized importance. REE total abundances (Sum REE) in the Japan Sea are strongly dependent upon the paleoceanographic position of a given site with respect to terrigenous and biogenic sources. REE concentrations at Site 794 overall correspond well to aluminosilicate chemical indices and are strongly diluted by SiO2 within the upper Miocene-Pliocene diatomaceous sequence. Eu/Eu* values at Site 794 reach a maximum through the diatomaceous interval as well, most likely suggesting an association of Eu/Eu* with the siliceous component, or reflecting slight incorporation of a detrital feldspar phase. SumREE at Site 795 also is affiliated strongly with aluminosilicate phases and yet is diluted only slightly by siliceous input. At Site 797, SumREE is not as clearly associated with the aluminosilicate fraction, is correlated moderately to siliceous input, and may be sporadically influenced by detrital heavy minerals originating from the nearby rifted continental fragment composing the Yamato Rise. Ce/Ce* profiles at all three sites increase essentially monotonically with depth and record progressive diagenetic LREE fractionation. The observed Ce/Ce* increases are not responding to changes in the paleoceanographic oxygenation state of the overlying water, as there is no independent evidence to suggest the proper oceanographic conditions. Ce/Ce* correlates slightly better with depth than with age at the two Yamato Basin sites. The downhole increase in Ce/Ce* at Sites 794 and 797 is a passive response to the diagenetic transfer of LREE (except Ce) from sediment to interstitial water. At Site 795, the overall lack of correlation between Ce/Ce* and Lan/Ybn suggests that other processes mask the diagenetic behavior of all LREEs. First-order calculations of the Ce budget in Japan Sea waters and sediment indicate that ~20% of the excess Ce adsorbed by settling particles is recycled within the water column and that an additional ~38% is recycled at or near the seafloor. Thus, because the remaining excess Ce is only ~10% of the total Ce, there is not a large source of Ce to the deeply buried sediment, further suggesting that the downhole increase in Ce/Ce* is a passive response to diagenetic behavior of the other LREEs. The REE chemistry of Japan Sea sediment therefore predicts successive downhole addition of LREEs to deeply buried interstitial waters.

Rare earth element data for sediments from ODP Leg 127

The relative effects of paleoceanographic and paleogeographic variations, sediment lithology, and diagenetic processes on the recorded rare earth element (REE) chemistry of Japan Sea sediments are evaluated by investigating REE total abundances and relative fractionations in 59 samples from Ocean Drilling Program Leg 127. REE total abundances (Sum REE) in the Japan Sea are strongly dependent upon the paleoceanographic position of a given site with respect to terrigenous and biogenic sources. REE concentrations at Site 794 (Yamato Basin) overall correspond well to aluminosilicate chemical indices and are strongly diluted by SiO2 within the late Miocene-Pliocene diatomaceous sequence. Eu/Eu* values at Site 794 reach a maximum through the diatomaceous interval as well, most likely suggesting an association of Eu/Eu* with the siliceous component, or reflecting slight incorporation of a detrital feldspar phase. Sum REE at Site 795 (Japan Basin) also is affiliated strongly with aluminosilicate phases, yet is diluted only slightly by siliceous input. At Site 797 (Yamato Basin), REE is not as clearly associated with the aluminosilicate fraction, is correlated moderately to siliceous input, and may be sporadically influenced by detrital heavy minerals originating from the nearby rifted continental fragment composing the Yamato Rise. The biogenic influence is largest at Site 794, moderately developed at Site 797, and of only minor importance at Site 795, reflecting basinal contrasts in productivity such that the Yamato Basin records greater biogenic input than the Japan Basin, while the most productive waters overlie the easternmost sequence of Site 794. Ce/Ce* profiles at all three sites increase monotonically with depth, and record progressive diagenetic LREE fractionation. The observed Ce/Ce* record does not respond to changes in oxygenation state of the overlying water, and Ce/Ce* correlates slightly better with depth than with age. The downhole increase in Ce/Ce* at Site 794 and Site 797 is a passive response to diagenetic transfer of LREE (except Ce) from sediment to interstitial water. At Site 795, the overall lack of correlation between Ce/Ce* and La_n/Yb_n suggests that other processes are occurring which mask the diagenetic behavior of all LREEs. First-order calculations of the Ce budget in Japan Sea waters and sediment indicate that ~20% of the excess Ce adsorbed by settling particles is recycled within the water column, and that an additional ~38% is recycled at or near the seafloor (data from Masuzawa and Koyama, 1989). Thus, because the remaining excess Ce is only ~10% of the total Ce, there is not a large source of Ce to the deeply buried sediment, further suggesting that the downhole increase in Ce/Ce* is a passive response to diagenetic behavior of the other LREEs. The REE chemistry of Japan Sea sediment therefore predicts successive downhole addition of LREEs to deeply-buried interstitial waters.

Correlation between wet bulk density and carbonate content from IODP Hole 321-U1338A, 321-U1338B and 321-U1338C

Sediment cores collected from the Eastern Equatorial Pacific Ocean display a clear positive second-order relationship between wet bulk density (WBD) and carbonate content. This has long interested the paleoceanography community because detailed Gamma Ray Attenuation Porosity Evaluator (GRAPE) measurements, which approximate WBD, might be used to determine records of carbonate content at very high temporal resolution. Although general causes for the relationship are known, they have not been presented and discussed systematically on the basis of first principles. In this study, we measure the mass and carbonate content of 50 sediment samples with known WBD from Site U1338, before and after rinsing with de-ionized water; we also determine the mass related proportion of coarse (> 63 µm) material. Samples exhibit clear relationships between WBD, carbonate content, mass loss upon rinsing, and grain size. We develop a series of mathematical expressions to describe these relationships, and solve them numerically. As noted by previous workers, the second-order relationship between WBD and carbonate content results from the mixing of biogenic carbonate and biogenic silica, which have different grain densities and different porosities. However, at high carbonate content, a wide range in WBD occurs because samples with greater amounts of coarse carbonate have higher porosity. Moreover compaction impacts carbonate particles more than biogenic silica particles. As such, a single two-component equation cannot be used to determine carbonate content accurately across depth intervals where both the porosity and type of carbonate vary. Instead, the WBD-carbonate relationship is described by an infinite series of curves, each which represents mixing of multiple sediment components with different densities and porosities. Dissolved ions also precipitate from pore space during sample drying, which adds mass to the sediment. Without rinsing samples, simple empirical relationships between WBD and carbonate content are further skewed by salt dilution.

Immobilisation dose rates and photogrammetry based mass calculations for southern elephant seals during expedition JUB2010

Immobilization and anaesthesia of adult male southern elephant seals (Mirounga leonina) is potentially risky for animals and scientists. A tiletamine/zolazepam injection is considered the most appropriate drug combination for field application in this species. Since appropriate dosages are difficult to assess due to uncertainties in weight estimation, we used photogrammetry-derived weight estimates to ensure precise post hoc calculations of dosages. We report on 15 intramuscular tiletamine/zolazepam immobilizations of post-moult males of the upper weight class at King George Island/Isla 25 de Mayo, in April 2010. Initial injections were made using blowpipe syringes. Mean tiletamine/zolazepam combined dosages of 0.71 mg/kg (SD ± 0.16) ranged between 0.46 and 1.01 mg/kg. In four cases, ketamine was added in dosages between 0.96 and 2.61 mg/kg. Mean induction period was 23 min (± 15), and the mean duration of the procedures from first injection to release of the animals required 96 min (± 51). Four seals exhibited periods of apnoea, and one case of an extended, repetitive, and potentially critical apnoea (> 25 and 8 min) required intervention in order to successfully re-initiate spontaneous respiration. All procedures resulted in proper immobilizations allowing for the deployment of the satellite tags on the seals' heads. The fact that even substantial deviations between the initial weight estimates and the photogrammetry-derived weight estimates had no apparent effect on the course of the immobilization underlines the drugs' wide safety margin in this species.