(Table 3, Page 417) Table 3. The concentrations of Zn, Cu, Pb, Cd, Ni, Co, Ag, Mn and Fe in a soluble in 1M HCl fraction of ferromanganese nodules of Slupsk Furrow in the southern Baltic sea

The concentration of Zn, Cu, Pb, Cd, Ni, Co, Ag, Mn, Fe, Ca, Mg, K and Na in molluscs Macoma balthica, Mya arenaria, Cardium glaucum, Mytilus edulis and Astarte borealis from the southern Baltic was determined. The surface sediments and ferromanganese concretions associated with the molluscs were also analysed for concentration of these metals. Species- and region-dependent differences in the metal levels of the organisms were observed. The properties of molluscs analysed which have a tendency toward elevated biological tolerance of selected trace metals were specified. The interelement relationship between metal concentrations in the soft tissue and the shell was estimated and was discussed.

Concentrations of Fe, Mn, Cu, Zn, Co, Ni, Pb, Cd, B, and SiO2 in interstitial waters from bottom sediments of the Atlantis II and Discovery Deeps, Red Sea rift zone

Chemical analyzes show that interstitial waters from ore-bearing bottom sediments of the Atlantis II and Discovery Deeps are enriched in Fe, Mn, Cu, Ni, Co, Zn, Pb, and Cd compared to sea water. Enrichment factors of these trace elements in the interstitial waters of the Atlantis II Deep relative to the sea water vary within the following ranges: for Fe from 100 to 7000, for Mn from 19047 to 32738, for Zn from 500 to 1600, for Pb from 78333 to 190000, for Cu from 107 to 654. Comparison of average weighted concentrations of Fe, Mn, Zn, Pb, Cu, Ni in the bottom sediments and the interstitial waters of the Atlantis II Deep indicates common regularities and good relationship in distribution of these elements along sediment cores. Differences in concentrations and distribution of the studied trace elements in the interstitial waters of the Atlantis II and Discovery Deeps result from different chemical compositions of hydrothermal fluids entering these deeps.

(Table 4+5, Page 290) Distribution of Mn, Fe, Cu. Pb, Zn, Ni and Co in single manganese nodules

Chemical analyses of manganese nodules from the Central Pacific Basin show that their chemical composition varies regionally, although that of the associated sediments is markedly uniform throughout the basin. Mn content varies from 16 to 32% in average. Its higher value is generally found in nodules from siliceous clay and a few from deep-sea clay. Fe content tends to enrich in nodules from deep-sea clay area. Most manganese nodules, except those from deep-sea clay, are remarkably depleted in Fe compared with ones from the other Pacific regions. Mostly, Cu and Ni contents exceed 1% in nodules from siliceous clay, and decrease towards the northwest of the basin where deep-sea clay is distributed. The inter-element relationship between manganese nodules and associated sediments suggests that the mechanism of incorporation of major and minor elements in nodules is apparently different from that of the associated sediments. This finding seems to provide a new interpretation on the problem why manganese nodules having low accumulation rate are not buried by the associated sediments with greater sedimentation rate and then occur on sediment-seawater interface.

Heavy metal contents in Fe-Mn nodules and crusts from R/V Vityaz polygons and stations in the East Indian Ocean

Regional variations in abundance, morphology, and chemical composition of Fe-Mn nodules have a zonal character. Due to circumcontinental zonality of terrigenous sedimentation the main mass of the nodules occurs in the pelagic part of the ocean, in areas of minimal sedimentation rates. In spatial variations in morphology and chemical composition of the nodules the latitudinal zonality is very clear and associated with latitudinal changes in facial conditions of sedimentation. Elevated contents of Mn, Ni, and Cu and of Mn/Fe ratio occur in nodules from the radiolarian belt. Changes of chemical composition of the nodules with depth (vertical zonality of mineralization) are confirmed. Local variations in abundance, morphology and chemical composition of the nodules are caused by ruggedness of relief and depth variations, variations in sedimentation rate, age of ore formation, intensity of diagenetic redistribution of metals.

Geochemistry on sediments in Lake Biwa

Thirty sediment cores (30-40 cm in length), 47 Ekman dredge sediments, and Mn concretions were collected from Lake Biwa. The concentrations of 36 elements in the samples were determined by instrumental neutron activation, X-ray fluorescence, atomic absorption, and colorimetric analyses. The elements determined included Mn, P, As, Sb, Fe, Ni, Co, Zn, Cu, Pb, Hg, Cr, Ti, Na, K, Rb, Cs, Mg, Ca, Sr, Ba, Sc, Hf, La, Ce, Sm, Eu, Yb, Lu, U, Th, Au, Ta, Nd, Br and N. Based on statistical considerations and calculation of the concentration factors of the elements, the features of the elemental distribution in Lake Biwa sediment were determined. The main results are summarized as follows : (1) Concentrations of Mn and As were very high in the uppermost oxidized layer of the offshore sediment and Mn concretions. This resulted from the dissolution-deposition cycles of these elements within the sedimentary column and the bottom water. The fixation of As at the sediment surface is mainly attributed to the adsorption of arsenate onto Mn (II) -rich hydrous Mn (IV) oxide. (2) There were high concentrations of Zn, Cu, Pb and Hg in the recent sediments. Although the source of these elements is attributed to human activities, the individual distributions of Zn and Cu in the sediment may result from the deposition of metal-rich planktonic debris and subsequent degradation of the debris. (3) The orders of increasing concentrations of alkali metals and lanthanides in the sediment from the central region compared with the nearshore pediment were identical to the orders of increasing atomic numbers from Na to Cs and from La to Lu, respectively.

Chemistry of Jurassic/Cretaceous black shales

Black shale samples of Jurassic to Cretaceous age recovered during the 'Norwegian Shelf Drilling Program' between 1987 and 1991 from Sites 7430/10-U-01 (Barents Sea), 6814/04-U-02 (Norwegian Shelf near the Lofoten) and 6307/07-U-02 (Norwegian Shelf near Trondheim) were analyzed for major and trace elements. These laminated black shales are characterized by high total organic carbon (TOC) and total sulfur (TS) contents as well as by significant enrichments in several redox-sensitive and/or sulfide-forming trace metals (Ag, Bi, Cd, Co, Cr, Cu, Mo, Ni, Re, Sb, Tl, U, V, and Zn). Enrichment factors relative to 'average shale' are comparable to those found in Cenomanian-Turonian boundary event (CTBE) black shales and Mediterranean sapropels. The Re content is high in the studied black shales, with maximum values up to 1221 ng/g. Re/Mo ratios averaging 2.3*10**-3 are close to the seawater value. High trace metal enrichments and Re/Mo ratios close to the seawater value point to a dominantly anoxic and sulfidic water column during black shale formation. Interbeds with higher Re/Mo ratios, especially in high-resolution sampled core sections, point to brief periods of suboxic conditions. Additionally, enhanced Zn concentrations in the black shales from the Barents Sea support the assumption that hydrothermal activity was also high during black shale deposition. Trace metal signatures of black shales at different drill sites on a transect along the Norwegian Shelf are not only influenced by water depth but also by their location in the boreal realm. Metal enrichments are higher in the northern compared to the southern sites. Volgian (=Tithonian 151-144 Ma BP) black shales exhibit elevated trace metal contents in comparison to their Berriasian (144-137 Ma BP) counterparts. This probably reflects a change in the circulation pattern during periods of black shale formation. Therefore different paleoceanographic conditions, probably controlled by climatic change linked to the transgression of the paleo-sealevel and the North Atlantic opening, may have developed from the Volgian to the Berriasian.

Chemical composition and fluxes of deep sea suspended matter within and over the 9°50'N hydrothermal field, EPR

Results of geochemical studies of suspended matter from the water mass over the hydrothermal field at 9°50'N on the East Pacific Rise are reported. The suspended matter was sampled in background waters, in the buoyant plume, and in the near-bottom waters. Contents of Si, Al, P, Corg, Fe, Mn, Cu, Zn, Ni, Co, As, Cr, Cd, Pb, Ag, and Hg were determined. No definite correlations were found between the elements in the background waters. Many of the chemical elements correlated with Fe and associated with its oxyhydroxides in the buoyant plume. In the near-bottom waters trace elements are associated with Fe, Zn, and Cu (probably, with their sulfides formed during mixing of hydrothermal fluids with seawater). Chemical composition of sediment matter precipitated in a sediment trap was similar to the near-bottom suspended matter.

Concentrations of suspended matter and heavy metals in melted ice- and snow water from the Barents Sea

In September-October 1998, during Cruise 14 of R/V Akademik Fedorov to the Barents Sea, in the region of 82° N between the Spitsbergen and Novaya Zemlya archipelagos samples of snow and ice were collected within four polygons. By means of atomic absorption with an electothermal atomizer (onboard the ship) in filtered (dissolved form) and unfiltered (sum of dissolved and particulate forms) samples of snow melt and ice melt concentrations of Fe, Mn, Cu, Cr, Ni, Co, Pb, and Cd were determined in order to estimate level of potential contamination of snow and ice with these metals. Excluding data on Ni, Cd (and probably Cu) in ice that were regarded to be unsatisfactory because of probable contamination of the ice samples during drilling concentrations of all the elements in snow and ice of the northern part of the Barents Sea appeared to be close to their background values or below. An attempt to identify the main sources of metal supply to snow from the atmosphere by comparison of ratios of metal particulate form to total content in snow of the Barents Sea and the same ratios in snow samples from clean regions of Finland and from contaminated areas of the Kola Peninsula showed that aerosols in the area of the expedition were supplied into the Barents Sea atmosphere from different sources, both natural and anthropogenic.

Chemical composition of mineral phases of serpentinized and steatized peridotite from the Mid Atlantic Ridge (15°20'N Fracture Zone, ODP Leg209)

Serpentinization of abyssal peridotites is known to produce extremely reducing conditions as a result of dihydrogen (H2,aq) release upon oxidation of ferrous iron in primary phases to ferric iron in secondary minerals by H2O.We have compiled and evaluated thermodynamic data for Fe-Ni-Co-O-S phases and computed phase relations in fO2,g-fS2,g and aH2,aq-aH2S,aq diagrams for temperatures between 150 and 400°C at 50MPa.We use the relations and compositions of Fe-Ni-Co-O-S phases to trace changes in oxygen and sulfur fugacities during progressive serpentinization and steatitization of peridotites from the Mid-Atlantic Ridge in the 15°20'N Fracture Zone area (Ocean Drilling Program Leg 209). Petrographic observations suggest a systematic change from awaruite- magnetite-pentlandite and heazlewoodite-magnetite-pentlandite assemblages forming in the early stages of serpentinization to millerite-pyrite-polydymite-dominated assemblages in steatized rocks. Awaruite is observed in all brucite-bearing partly serpentinized rocks. Apparently, buffering of silica activities to low values by the presence of brucite facilitates the formation of large amounts of hydrogen, which leads to the formation of awaruite. Associated with the prominent desulfurization of pentlandite, sulfide is removed from the rock during the initial stage of serpentinization. In contrast, steatitization indicates increased silica activities and that highsulfur-fugacity sulfides, such as polydymite and pyrite-vaesite solid solution, form as the reducing capacity of the peridotite is exhausted and H2 activities drop. Under these conditions, sulfides will not desulfurize but precipitate and the sulfur content of the rock increases. The co-evolution of fO2,g-fS2,g in the system follows an isopotential of H2S,aq, indicating that H2S in vent fluids is buffered. In contrast, H2 in vent fluids is not buffered by Fe-Ni-Co-O-S phases, which merely monitor the evolution of H2 activities in the fluids in the course of progressive rock alteration.The co-occurrence of pentlandite- awaruite-magnetite indicates H2,aq activities in the interacting fluids near the stability limit of water. The presence of a hydrogen gas phase would add to the catalyzing capacity of awaruite and would facilitate the abiotic formation of organic compounds.

Geochemistry of reduction haloes in ODP Holes 135-834A and 135-837A

The sediment column overlying basement in the Lau Basin consists of a sequence of volcaniclastic turbidites interbedded with hemipelagic clayey nannofossil mixed sediments, overlain in turn by a sequence of hemipelagic clayey nannofossil oozes containing sporadic calcareous turbidites. The clayey nannofossil oozes and mixed sediments are pervasively stained by hydrothermally derived iron and manganese oxyhydroxides. Sharply defined, lighter colored bands occur in the hemipelagic sediments, immediately beneath some (but by no means all) volcaniclastic and calcareous turbidites. These are identified as reduction haloes, of a type previously identified in quite different turbidite/pelagic sequences. The haloes are attributed to the burial of labile surficial Corg by turbidites, followed by the remineralization of this Corg with Mn and Fe oxyhydroxides as electron acceptors. The resultant characteristic Mn and Fe concentration/depth profiles are described, and a model is proposed for their development. The color alteration of the halo is ascribed to the removal of Mn oxyhydroxides, because, although the Fe content fluctuates through the haloes, this does not appear to affect their color. Other elements (Co, Cu, and Ni) are also at low concentration levels in the haloes like Mn, consistent with remobilization and migration out of the halo section, although the profile shapes are not identical with those of Mn. The behavior of V is distinctive in that it appears to have migrated into the haloes to be enriched there. Haloes are unlikely to form if turbidite emplacement is erosive and removes the near-surface layer, which generally is the most fluid part of the sediment and contains the highest levels of reactive Corg to drive the reduction process. Conversely, the presence of a halo implies that emplacement of the overlying turbidite did not significantly erode the pre-existing sediment/water interface.

Composition of dissolved, particulate and sinking material in hydrothermal plumes above the TAG and Broken Spur hydrothermal fields

The paper reports data on distribution of dissolved (Mn, Zn, Cu, Pb, and Cd) and particulate (Fe, Mn, Zn, Cu, Pb, Ni, and Co) species of metals in hydrothermal plumes above the active TAG and Broken Spur hydrothermal fields (26° N and 29° N in the MAR rift valley, respectively). Sediment trap data on fluxes of hydrothermal sedimentary material in the areas indicate that (i) the predominant Zn source for metalliferous sediments at the TAG field is material precipitating from the neutrally buoyant plume, and (ii) the predominant source of Fe and Co is re-deposited ore material coming from the area of extensive settling of sulfides.