Geochemistry of the oldest Atlantic oceanic crust

Controversy has surrounded the issue of whether mantle plume activity was responsible for Pangaean continental rifting and massive flood volcanism (resulting in the Central Atlantic Magmatic Province or CAMP, emplaced around 200 Ma) preceding the opening of the central Atlantic Ocean in the Early Mesozoic. Our new Sr-Nd-Pb isotopic and trace element data for the oldest basalts sampled from central Atlantic oceanic crust by deep-sea drilling show that oceanic crust generated from about 160 to 120 Ma displays clear isotopic and chemical signals of plume contamination (e.g., 87Sr/86Sr(i) = 0.7032-0.7036, epsilonNd(t) =+6.2 to +8.2, incompatible element patterns with positive Nb anomalies), but these signals are muted or absent in crust generated between 120 and 80 Ma, which resembles young Atlantic normal mid-ocean ridge basalt. The plume-affected pre-120 Ma Atlantic crustal basalts are isotopically similar to lavas from the Ontong Java Plateau, and may represent one isotopic end-member for CAMP basalts. The strongest plume signature is displayed near the center of CAMP magmatism but the hotspots presently located nearest this location in the mantle reference frame do not appear to be older than latest Cretaceous and are isotopically distinct from the oldest Atlantic crust. The evidence for widespread plume contamination of the nascent Atlantic upper mantle, combined with a lack of evidence for a long-lived volcanic chain associated with this plume, leads us to propose that the enriched signature of early Atlantic crust and possibly the eruption of the CAMP were caused by a relatively short-lived, but large volume plume feature that was not rooted at a mantle boundary layer. Such a phenomenon has been predicted by recent numerical models of mantle circulation.

Foraminiferal assemblages of the Mackenzie-Beaufort Sea Slope and Amundsen Gulf

Two cores, one from the Beaufort Sea Slope at 1000 m water depth (core 750) and one from the Amundsen Gulf at 426 m (core 124), were collected to help determine paleo-ice cover in the Holocene and late glacial of this area. Site 750 is particularly sensitive to changes in paleo-ice cover because it rests beneath the present ice margin of the permanent Arctic ice pack. Core 124 was sampled just in front of the former glacier that moved out into the Amundsen Gulf and started to recede about 13 ka B.P. Both cores have a strong occurrence of calcareous foraminifera in the upper few centimeters, but these disappear throughout most of the Holocene, suggesting more open water in that time period than present. In the sediments representing the end of the last glacial period (dated at ~11,500-14,000 calibrated years B.P. (cal B.P.)) a calcareous fauna with an abundant planktic foraminiferal fauna suggests a return to almost permanent ice cover, much like the central Arctic today. Together with the foraminifera there was also abundant ice-rafted debris (IRD) in both cores between 12,000 cal B.P. and ~14,000 cal B.P., but those units are of different ages between cores, suggesting different events. The IRD in both cores appears to have the same magnetic and chemical signals, but their origins cannot be determined exactly until clay mineralogy is completed. There is abundant organic debris in both cores below the IRD units: the organics in core 750 are very diffuse and not visually identifiable, but the organic material in core 124 is clearly identifiable with terrestrial root fragments; these are 14C dated at over 37,000 years B.P. This is a marine unit as it also has glacial front foraminifera in the sediment with the organic debris that must have been originating from subglacial streams. The seismic and multibeam data both indicate glaciers did not cross the core 124 site.

(Table 3) Geochemistry of borehole fluids of ODP Hole 137-504B

Circulation of seawater through basaltic basement for several million years after crustal emplacement has been inferred from studies of surface heat flow, and may play a significant role in the exchange of elements between the oceanic crust and seawater. Without direct observation of the fluid chemistry, interpretations regarding the extent and timing of this exchange must be based on the integrated signal of alteration found in sampled basalts. Much interest has thus been expressed in obtaining and analyzing fluids directly from basaltic formations. It has been proposed that open oceanic boreholes can be used as oceanic groundwater wells to obtain fluids that are circulating within the formation. Water samples were collected from the open borehole in Hole 504B prior to drilling operations on Leg 137, with the original intention of collecting formation fluids from the surrounding basaltic rocks. Past results have yielded ambiguous conclusions as to the origin of the fluids recovered-specifically, whether or not the fluids were true formation fluids or merely the result of reaction of seawater in the borehole environment. The chemistry of eight borehole fluid samples collected during Leg 137 is discussed in this paper. Large changes in major, minor, and isotopic compositions relative to unaltered seawater were observed in the borehole fluids. Compositional changes increased with depth in the borehole. The samples exhibit the effect of simple mixing of seawater, throughout the borehole, with a single reacted fluid component. Analysis and interpretation of the results from Leg 137 in light of past results suggest that the chemical signals observed may originate predominantly from reaction with basaltic rubble residing at the bottom of the hole during the interim between drilling legs. Although this endeavor apparently did not recover formation waters, information on the nature of reaction between seawater and basalt at the prevalent temperatures in Hole 504B (>160°C) has been gained that can be related to reconstruction of the alteration history of the oceanic crust. Isotopic analyses allow calculation of element-specific water/rock mass ratios (Li and Sr) and are related to the extent of chemical exchange between the borehole fluids and basalt.

Seasonally resolved chemical records of six ice cores from the Dronning Maud Land, Antarctica

The ammonium, calcium, and sodium concentrations from three intermediate depth ice cores drilled in the area of Dronning Maud Land, East Antarctica, have been investigated. Since all measurements were performed by a high-resolution Continuous Flow Analysis system, for the first time seasonal signals of chemical trace species could be obtained from the interior of central Antarctica over a period of approximately 2 millennia. Although the elevation as well as the accumulation rate differ between the drilling sites, similar values were obtained by comparing mean concentrations spanning the last 900 years. However, a distinct lack of intersite correlation was found on decadal timescales. Despite a noticeable accumulation change, apparent in one core, no significant concentration change of all three species has occurred. All the measured ions show clear seasonal signals over the whole records. While the sea-salt-related component sodium peaks simultaneously with calcium, the maximum ammonium concentration occurs in the snow with a time lag of 2 months after the sea-salt peak. More than 60% of the calcium concentration can be attributed to an ocean source. Elevated sodium concentrations were found within this millennium compared to mean values of the whole records, but the spatially varying shape of the increase suggests that a possible climatic signal is biased by local deposition effects.

Mean chemical characteristics and volcano signatures of ice cores from Belukha, the Everest and three Svalbard sites

Ice cores from outside the Greenland and Antarctic ice sheets are difficult to date because of seasonal melting and multiple sources (terrestrial, marine, biogenic and anthropogenic) of sulfates deposited onto the ice. Here we present a method of volcanic sulfate extraction that relies on fitting sulfate profiles to other ion species measured along the cores in moving windows in log space. We verify the method with a well dated section of the Belukha ice core from central Eurasia. There are excellent matches to volcanoes in the preindustrial, and clear extraction of volcanic peaks in the post-1940 period when a simple method based on calcium as a proxy for terrestrial sulfate fails due to anthropogenic sulfate deposition. We then attempt to use the same statistical scheme to locate volcanic sulfate horizons within three ice cores from Svalbard and a core from Mount Everest. Volcanic sulfate is <5% of the sulfate budget in every core, and differences in eruption signals extracted reflect the large differences in environment between western, northern and central regions of Svalbard. The Lomonosovfonna and Vestfonna cores span about the last 1000 years, with good extraction of volcanic signals, while Holtedahlfonna which extends to about AD1700 appears to lack a clear record. The Mount Everest core allows clean volcanic signal extraction and the core extends back to about AD700, slightly older than a previous flow model has suggested. The method may thus be used to extract historical volcanic records from a more diverse geographical range than hitherto.

Abundance patterns and isotopic signals of morphotypes of Globigerinoides ruber

The chemical composition of shells of the planktonic foraminifer Globigerinoides ruber (white) is frequently used to determine past sea surface conditions. Recently, it has been shown that arbitrarily defined morphotypes within this species exhibit different chemical and isotopic signatures. Here, we investigate the occurrence through time and in space of morphological types of G. ruber (white) in late Quaternary and Holocene sediments of the central and the eastern Mediterranean Sea. In 115 samples representing two distinct time intervals (MIS 1-2 and MIS 9-12) at ODP Site 964 and the piston core GeoTü-SL96, we have defined three morphological types within this species and determined their relative abundances and stable isotopic composition. A quantitative analysis of morphological variation within G. ruber (white) in four samples revealed that the subjectively defined morphotypes occupy separate segments of a continuous and homogenous morphospace. We further show that the abundance of the morphotypes changes significantly between glacials and interglacials and that the three morphotypes of G. ruber show significant offsets in their stable isotopic composition. These offsets are consistent within glacial and interglacial stages but their sign is systematically reversed between the two Sites. Since the isotopic shifts among the three G. ruber morphotypes are systematic and often exceed 1per mil, their understanding is essential for the interpretation of all G. ruber-based proxy records for the paleoceanographic development of the Mediterranean during the late Quaternary.

Chemical composition of DSDP and ODP cherts

Rare earth element (REE), major, and trace element abundances and relative fractionations in forty nodular cherts sampled by the Deep Sea Drilling Project (DSDP) and Ocean Drilling Program (ODP) indicate that the REE composition of chert records the interplay between terrigenous sources and scavenging from the local seawater. Major and (non-REE) trace element ratios indicate that the aluminosilicate fraction within the chert is similar to NASC (North American Shale Composite), with average Pacific chert including ~7% NASC-like particles, Indian chert ~11% NASC, Atlantic chert ~17% NASC, and southern high latitude (SHL) chert 53% NASC. Using La as a proxy for sum REE, approximations of excessive La (the amount of La in excess of that supplied by the detrital aluminosilicate fraction) indicate that Pacific chert contains the greatest excessive La (85% of total La) and SHL chert the least (38% of total La). As shown by interelement associations, this excessive La is most likely an adsorbed component onto aluminosilicate and phosphatic phases. Accordingly, chert from the large Pacific Ocean, where deposition occurs relatively removed from significant terrigenous input, records a depositional REE signal dominated by adsorption of dissolved REEs from seawater. Pacific chert Ce/Ce* <<1 and normative La/Yb ~ 0.8-1, resulting from adsorption of local Ce-depleted seawater and preferential adsorption of LREEs from seawater (e.g., normative La/Yb ~0.4), which increases the normative La/Yb ratio recorded in chert. Chert from the Atlantic basin, a moderately sized ocean basin lined by passive margins and with more terrigenous input than the Pacific, records a mix of adsorptive and terrigenous REE signals, with moderately negative Ce anomalies and normative La/Yb ratios intermediate to those of the Pacific and those of terrigenous input. Chert from the SHL region is dominated by the large terrigenous input on the Antarctic passive margin, with inherited Ce/Ce* ~1 and inherited normative La/Yb values of ~1.2-1.4. Ce/Ce* does not vary with age, either throughout the entire data base or within a particular basin. Overall, Ce/Ce* does not correlate with P2O5 concentrations, even though phosphatic phases may be an important REE carrier.

Chemical composition of basalts from DSDP Hole 46-396B

Samples of crystalline basalt from Site 396 B are all more or less altered, usually in strongly zoned patterns. Evidence has been found for several related or independent alteration stages, including (1) minor localized deuteric (amphibole and mixed clay minerals in miarolitic voids); (2) minor widespread nonoxidizing (pyrite on walls of vugs and cracks); (3) localized diffusion-controlled rug filling ("glauconite" in black halos); (4) pervasive low level oxidizing (transformation of titanomagnetite to cation-deficient titanomaghemite); (5) localized diffusion-controlled strongly oxidizing (breakdown of olivine and titanomaghemite in brown zones). Plagioclase and pyroxene are essentially unaltered. Detailed analyses of gray and brown zones in pillow basalts show that low temperature oxidation has proceeded in a step-wise fashion, with the relative stabilities of the igneous minerals controlling the steps. Secondary minerals that crystallized from pore fluids on to the walls of vugs may or may not be related to local alteration of primary phases. During the most intense stage of alteration, brown oxidation zones grew into basalt fragments behind diffusion controlled fronts. The specific reactions and products of this stage differ among the lithologic units at the site. A model is proposed whereby efficient seawater circulation through the pillow units maintains the pH and the concentrations of Mg2+ and SiO2 dissolved at low levels in pore fluids, so that olivine is replaced by hydrous ferric oxides, and Mg and SiO2 are removed from the system. In the massive basalt unit, circulation is somewhat less effective and Mg and SiO2 are retained in smectites. Deposition of authigenic minerals in the sequence saponite/Fe-Mn oxides/phillipsite/calcite in vugs and cracks may reflect the gradual closing of the systems and probably signals the end of localized oxidation in parts of the core. Mineral compositions indicate that most of these deposits formed from seawater at very low temperature.

Chemical sensor measurements at the sediment surface of the Håkon Mosby mud volcano (LOOME)

Six sensor units each having a pH, dissolved oxygen (DO) and oxidation reduction potential (ORP) sensor, plus a central logger, and connection cables were purchased from RBR (Ottawa). The sensing loggers were placed at a transect across the hot spot. Unfortunately, 5 of the 7 loggers were drowned. Only the central logger, that collected the data from the 6 sensor loggers, and one of the sensor loggers remained dry and functional. The sensor was positioned at 50 m south of the frame, in the center of the hot spot. The ORP did not show interpretable signals. The DO and pH signals showed good correlation (. At the end of October 2009 both signals decreased, the pH became as low as 4, possibly indicating increased seepage, or burial in expelled sediments. In December both sensors regained seawater values and then decreased again until the end of May 2010. A pH of 4 can only be reached by very high carbondioxide levels. The dynamics of the signals indicate eruptions and sediment movements from October 2009 till the end of the deployment.