Tab. 6+7: Altitudes and variations of altitudes in the area of the Filchner and Neumayer Stations

The determination of the strain and velocity behaviour of the ice surface near the two German Antarctic Stations on Filchner/Ronne and Ekström ice shelves was performed by the use of various geodetic measuring techniques. The relative positions and heights of control points valid for reference data were deduced from terrestrial observations (horizontal and vertical angle selectro optical distances). After a second sampling of data, these values served as the basis for the deformation analyses. Doppler-Satellite-observations (Navy Navigation Satellite System) made absolute positioning (latitude, longitude, height) of special points possible. These Doppler observations, supported by azimuth measurements (gyro-theodolite and sun observations) provided the datum of control networks (translations and orientation). After the repetition of these observations, the drift rates and azimuths of the control points as wenas the rotanon rates of the surface elements could be given. From vertical angles and horizontal distances differences in height end refraction coefficients were calculated. On days without clouds the refraction coefflcients increased by arnounts of up to 3.0 (in extreme cases up to 5.0). Distances over 1 km have to be subdivided to reach a standard deviation level of an heigh: difference better than 0.05 m. In order to determine the heterögeneity of refraction, some height differences should be measured with higher accuracy end-by subdivision of distances.

Point clouds of measurements in the Dechen Cave near Iserlohn, Germany

Modeling natural phenomena from 3D information enhances our understanding of the environment. Dense 3D point clouds are increasingly used as highly detailed input datasets. In addition to the capturing techniques of point clouds with LiDAR, low-cost sensors have been released in the last few years providing access to new research fields and facilitating 3D data acquisition for a broader range of applications. This letter presents an analysis of different speleothem features using 3D point clouds acquired with the gaming device Microsoft® Kinect. We compare the Kinect sensor with terrestrial LiDAR reference measurements using the KinFu pipeline for capturing complete 3D objects (< 4m**3). The results demonstrate the suitability of the Kinect to capture flowstone walls and to derive morphometric parameters of cave features. Although the chosen capturing strategy (KinFu) reveals a high correlation (R2=0.92) of stalagmite morphometry along the vertical object axis, a systematic overestimation (22% for radii and 44% for volume) is found. The comparison of flowstone wall datasets predominantly shows low differences (mean of 1 mm with 7 mm standard deviation) of the order of the Kinect depth precision. For both objects the major differences occur at strongly varying and curved surface structures (e.g. with fine concave parts).