Distribution, genesis and age of the Schlagwasser breccia (Warstein anticline, Rhenish massif)

The name "Schlagwasser breccia" is a synopsis of several debris flows in the Warstein area, which can be derived from the Warstein carbonate platform and the Scharfenberg reef. Though only locally developed, the breccia is important for the understanding of paleogeography and sedimentology in the Eastern Sauerland. Considering this breccia some gravitational-resedimentary slide movements between a high, consisting of reef carbonates, and a basin with flinz beds can be pointed out. From the uppermost Middle Devonian to the lowermost Lower Carboniferous several slides yielded the sedimentary components building up the 30 to 50 m thick polymict breccia. Some breccias were redeposited repeatedly as can be verified by different conodont maxima in single samples. Supplying area was the western part of the Warstein high, from which the slide masses glided off to the East and Southeast, more seldom to the West and Westsouthwest. All conodont zones from the upper Middle Devonian up to the lowermost Carboniferous could be identified in the Schlagwasser breccia. Therefore, an uninterrupted continuous sedimentation must have been prevalent in the supplying area; today this area nearly is denuded of flinz beds and cephalopod limestones. The slide masses spread transgressively to the East up to a substratum consisting of different units as massive limestone, flinz beds and cephalopod limestone; they are overlapped by Hangenberg beds, alum schists and siliceous rocks of the Lower Carboniferous. Parts of the substratum were transported during the progress of the slide masses. Proximal and distal parts of the flow masses can be distinguished by the diameter of the pebbles. Graded bedding and banking structures are marked only rarely. Way of transport was up to 3 km. Differently aged slide masses do not always overlap, but are placed side by side, too. Usually the slide masses do not spread out upon a greater area during sedimentation, but form closely limited debris flows. Synsedimentary fracturing and tilting of the reef platform, epirogenetic movements and seaquakes caused the slides. The entire formation period of the breccia includes about 20 millions of years. The longevity of the events points to solid paleomorphological situations around the eastern margin of the carbonate platform.

Selected Devonian/Carboniferous boundary profiles in the Sauerland area (Rhenish massif)

Selected sections, containing Devonian/Carboniferous boundary beds, are described from the northern and northeastern margin of the Rhenish massif, especially from the Seiler region near Iserlohn and the Warstein area. These sections are from prospecting trenches, quarries and road cuts. The dominantly carbonate sequences were investigated in regard to the development of conodonts. The Devonian/Carboniferous boundary could be placed precisely in both areas by means of the phylogenetic transition from Siphonodella praesulcata to S. sulcata. Compared investigations lead to the following conclusions: - The basal part of the Hangenberg limestone is heterochronous. - The Devonian/Carboniferous boundary lies distinctly below the Hangenberg limestone, i. e. at the same stratigraphical level as the Stockum limestone. - The Imitoceras limestone lens of Stockum and the Stockum limestone represent a special facies within the Hangenberg schists. 80th belong either to the praesulcata- and sulcata-zone or are restricted only to the sulcata-zone. - Protognathodus kuehni appears together with Siphonodella sulcata. Where S. sulcata is lacking, P. kuehni may be considered as a valid index conodont indicating the beginning of the Carboniferous. - The upper part of the Wocklum beds, following above the Wocklum limestone, usually consists up to the lower Carbonilerous boundary in a more or less consistent facies, that of the Hangenberg schists. Only in the section 01 the northeastern wall of the eastern Provincial Quarry at Drewer and in the road profile Rüthen - Nuttlar, the Devonian/Carboniferous boundary is to be placed in a continuous carbonate sequence. - The eastern Provincial Quarry at Drewer is therefore proposed as a new candidate section for the Devonian/Carboniferous boundary stratotype. - In many places the carbonates at the Devonian / Carboniferous boundary and the Hangenberg limestone are characterized by an impoverished conodont fauna. - Using platform conodonts, biofacies models are developed, permitting to conclude on the position of the respective setting 01 sedimentation area, either close to a rise or a basin.

Neptunian dikes and their fillings in carbonates of the Warstein area (northeastern Rhenish massif)

Neptunian dikes and cavities as weil as their fillings are described from Middle to Upper Devonian carbonates of the Warstein area. The genesis of the pre-Upper Carboniferous dikes is due to pre-orogenic synsedimentary tensional movements. Lifting, subsidence and tilting caused joints and cracks, which are enlarged to dikes and cavities on submarine conditions. The post-Upper Carboniferous dikes are based on the orogenesis during Upper Carboniferous time, causing numerous tectonical divisional planes in the sediments. Along these planes a far-reaching karstification took place since mesozoic time. According to their size the cavities are subdivided into macro-, mega- and microdikes. With the exception of one macrodike all the others are limited to the massive limestone. Megadikes especially occur in Upper Devonian cephalopod limestone and in the Erdbach limestone, microdikes can be found in all carbonatic rocks. The dikes follow pre-orogenic, tectonical and sedimentary divisional planes and are orientated to ac-, bc- as well as bedding planes and diagonal directions. The fillings happened down from above either in a solitary event or repeatedly in long-lived dikes during a span of several ten millions of years. More seldom the fillings took place laterally or upside from beneath. The dikes contain - without regard to autochthonous conodont faunas - older and/or younger mixed faunas, too. Occasionally they were used as life district by a trilobite fauna adapted to the dikes. The dikes represent sedimentary pitfalls and conserve sediments eroded in other places. Therefore, by aid of the fillings, it can be demonstrated, that stratigraphic gaps are not absolutely due to primary interruptions of sedimentation, but were caused by reworking. Some dikes contain the distal offsets of slides and suspension streams. Relations between condensation and development of dikes could not be derived in the Warstein area. However, an increase of the frequency of dikes towards east to the eastern margin of the Warstein carbonate platform could be pointed out. This margin is a slope, persisting more than 10 millions of years, between a block and a basin. Evidently cracks and dikes, which were caused by settlements, slides and earth quakes, occured there frequently. The Warstein dikes and cavities, caused by karstification, are filled with terrestrial Lower Cretaceous, marine Upper Cretaceous and terrestrial Pleistocene to Holocene sediments. Tertiary sediments could not be detected.

(Table A1) Calcium carbonate content of boreholes Kirchrode I and II

The technical details of drilling and coring at the Kirchrode I and II sites are presented. At these sites, a sequence of claystones and marlstones from an Albian shelf basin was recovered. Constraints on the ages of the sediments in the two boreholes are provided by the occurrence of the inoceramid bivalve Actinoceramus sulcatus, the first appearance of which is used to define the Middle/Upper Albian boundary and by observed facies changes that can be correlated to the established lithostratigraphy. The cores from the two boreholes provide a rather complete, 285-m-long sequence of the Upper Albian, with a 155.5-m-long overlap. Analysis of the tectonic structures showed considerable shortening in the Middle and Lower Albian part of the sequence due to normal faulting. Of the Upper Albian, only the lowermost part is affected by faults. The increase in sedimentation rates of terrigenous detritus and of marine biogenic carbonate, which occurs in the basal part of the C. auritus Subzone, is interpreted to reflect a regional change to a more humid climate and regional tectonic movements (uplift of the Rhenish Bohemian massif, subsidence of the Lower Saxony basin intensified locally by halokinetic movements). The further increase in marine productivity in the latest Albian may be related to upwelling of more nutrient-rich deep water along submarine relief in this shelf sea. Identification of Milankovitch cyclicity documented by the fluctuating CaCO3 contents of the sediments is used (i) to constrain the minimum time represented by the Upper Albian deposits, and (ii) to determine the duration of the sea level cycles (Cycle V: >=1.6 Ma, Cycle VI: >=2 Ma), and (iii) to establish the duration of the Late Albian ammonite subzones (e.g. Callihoplites auritus Subzone: 2.1 Ma). Average sedimentation rates determined from the identified 100-ka eccentricity cycles show a stepwise increase in sedimentation rates from 1-2 cm/1000 a in the Lower Albian dark claystones to 7-13 cm/1000 a in the late Late Albian. In addition to the general deepening trend through the Late Albian, two, nearly completely documented 3rd-order sea-level cycles in the Upper Albian of Kirchrode I were recognised, plus another one, cut short by faulting, at the base of the Upper Albian (documented in Kirchrode II). These global sea-level cycles were identified on the basis (a) of the sequence of the abundance maxima of selected benthos and plankton groups, (b) of trends in the fluctuations of the CaCO3 content, and (c) of the abundance of glauconite. The transgression periods in this Upper Albian deep shelf-basin are characterised by intensified circulation. This intensified circulation is found to have affected first the surface-near waters, resulting e.g. in an increase in the abundance of immigrant plankton and nekton species from the Tethys. At a later stage the deep water was affected, supporting then an increased population of suspension-feeding benthos, and causing condensation and erosion in the sediment at the sea floor.