Primary production at time series station DYFAMED

Phytoplankton carbon assimilation has been measured near monthly using the 14C method at DYFAMED France JGOFS time-series station from 1993 to 1999. Data were obtained using the "LET GO" technique, which allowed in situ injection of bicarbonate and incubation in enclosures at 10 depths. Incubation duration was 4 h around noon, from which daily production was estimated. The seasonal variation of the depth-integrated carbon assimilation exhibits a marked cycle. Maximum values reach 1.8 g C/m**2/d in March or April; constant lower values were observed from August to January, in the range 100-300 mg C/m**2/d. The annual primary production vary in the range 86-232 g C/m**2/yr, in the upper range of older estimations. Primary production normalized to chlorophyll a shows maximum values in the period of oligotrophy. This increase of carbon assimilation rate per unit of chlorophyll a appears as linked to the period of phosphorus-limited ecosystem, and vertical distribution of taxonomic pigments suggests a possible role of cyanobacteria. Potential export production has been estimated from primary production data and Fp ratio based on pigments concentrations. These estimates (which imply biological steady state conditions) vary in a wide range, from 19 to 71 g C/m**2/yr. There is a decoupling between years with high potential export production and years with high measured particulate fluxes, which highlights the question of balance by resupply of the limiting nutrients and the role of dissolved organic carbon. A possible shift of primary production towards a more regeneration-dominated system is suggested for recent years.

PSV records from Tangra Yumco and Taro Co (Tibetan Plateau)

Magnetostratigraphy has been serving as a valuable tool for dating and confirming chronologies of lacustrine sediments in many parts of the world. Suitable paleomagnetic records on the Tibetan Plateau (TP) and adjacent areas are, however, extremely scarce. Here, we derive paleomagnetic records from independently radiocarbon-dated sediments from two lakes separated by 250 km on the southern central TP, Tangra Yumco and Taro Co. Studied through alternating field demagnetization of u-channel samples, characteristic remanent magnetization (ChRM) directions document similar inclination patterns in multiple sediment cores for the past 4000 years. Comparisons to an existing record from Nam Co, a lake 350 km east of Tangra Yumco, a varve-dated record from the Makran Accretionary Wedge, records from Lakes Issyk-Kul and Baikal, and a stack record from East Asia reveal many similarities in inclination. This regional similarity demonstrates the high potential of inclination to compare records over the Tibetan Plateau and eventually date other Tibetan records stratigraphically. PSV similarities over such a large area (>3000 km) suggest a large-scale core dynamic origin rather than small scale processes like drift of the non-dipole field often associated with PSV records.

Phytoplankton in the Nhatrang Bay, South China Sea

Species composition, phytoplankton abundance, and relative yield of variable fluorescence (F_v/F_m) were determined in the mesotrophic Nhatrang Bay in October-November 2004. Species diversity (250 taxonomic units) and heterogeneity of the phytoplankton structure were high. With respect to number of species and their abundance, diatoms prevailed. In selected parts of the bay, dinoflagellates dominated. Average biomass in the water column under 1 m**2 (Bt) varied from 2.3 to 64.4 mg C/m**3 (av. 31.0 mg C/m**3). Bt values were the lowest at stations nearest to the river mouth. Seaward, Bt increased. Bt values increased with depth at some stations and decreased at others. In surface layers biomass was lower than that in the underlying waters. F_v/F_m values ranged from 0.10 to 0.64 (av. 0.49). The lowest F_v/F_m values were observed in the area close to the seaport. Over greater part of the bay, F_v/F_m values were higher than 0.47. Such values are indicative of relatively high potential of photosynthetic activity of phytoplankton. Abundance and species diversity were higher than those in the dry season (March-April).

Average fluorescence and dissolved iron and Fe-binding ligand characteristics during POLARSTERN expedition ANT-XXIV/3 in 2008

Organic complexation of dissolved iron (dFe) was investigated in the Atlantic sector of the Southern Ocean in order to understand the distribution of Fe over the whole water column. The total concentration of dissolved organic ligands ([Lt]) measured by voltammetry ranged between 0.54 and 1.84 nEq of M Fe whereas the conditional binding strength (K') ranged between 10**21.4 and 10**22.8. For the first time, trends in Fe-organic complexation were observed in an ocean basin by examining the ratio ([Lt]/[dFe]), defined as the organic ligand concentration divided by the dissolved Fe concentration. The [Lt]/[dFe] ratio indicates the saturation state of the natural ligands with Fe; a ratio near 1 means saturation of the ligands leading to precipitation of Fe. Reversely, high ratios mean Fe depletion and show a high potential for Fe solubilisation. In surface waters where phytoplankton is present low dissolved Fe and high variable ligand concentrations were found. Here the [Lt]/[dFe] ratio was on average 4.4. It was especially high (5.6-26.7) in the HNLC (High Nutrient, Low Chlorophyll) regions, where Fe was depleted. The [Lt]/[dFe] ratio decreased with depth due to increasing dissolved Fe concentrations and became constant below 450 m, indicating a steady state between ligand and Fe. Relatively low [Lt]/[dFe] ratios (between 1.1 and 2.7) existed in deep water north of the Southern Boundary, facilitating Fe precipitation. The [Lt]/[dFe] ratio increased southwards from the Southern Boundary on the Zero Meridian and from east to west in the Weddell Gyre due to changes both in ligand characteristics and in dissolved iron concentration. High [Lt]/[dFe] ratio expresses Fe depletion versus ligand production in the surface. The decrease with depth reflects the increase of [dFe] which favours scavenging and (co-) precipitation, whereas a horizontal increase in the deep waters results from an increasing distance from Fe sources. This increase in the [Lt]/[dFe] ratio at depth shows the very resistant nature of the dissolved organic ligands.

Calcareous dinoflagellate cysts in surface sediments from the Mediterranean Sea

The distribution of calcareous dinoflagellate cysts in surface sediments from the Mediterranean Sea was quantitatively analysed. The samples contain 11 cyst species and the vegetative coccoid Thoracosphaera heimii. Cyst abundance increases towards the deeper parts of the basins and is generally higher in the eastern Mediterranean Sea. Three major distribution characteristics exist: (1) different assemblages in oceanic and neritic regions, (2) little agreement with the associations of areas studied so far like the Atlantic Ocean, and (3) a unique oceanic assemblage in the eastern Mediterranean Sea. A gradual change in cyst assemblages from the western to the eastern Mediterranean Sea was observed and statistically compared with the main environmental gradients in the upper water column. Temperature, nitrate concentration and possibly salinity appear to be the most important factors controlling cyst production. Three groups containing cysts with similar environmental preferences can be distinguished: (1) an eastern Mediterranean group related to relatively high temperature and salinity but low nitrate concentration, (2) a group of more or less consistently abundant cosmopolitan species tolerating or even preferring relatively low temperature and salinity but high nitrate concentration, and (3) a group containing species that are possibly adapted to neritic environments and have probably been transported from coastal areas into the studied regions. In contrast to other calcareous plankton, calcareous dinoflagellate cysts correlate strongly with the main environmental gradients in the Mediterranean Sea, bearing a high potential for palaeoenvironmental reconstructions.

210Pb dates, radiocarbon ages and sedimentation and accumulation rates of sediment cores JM99-1198 and MD99-2297

The magnitude of Late Holocene climatic variations are less significant than those that took place during ice ages and deglaciations. However, detailed knowledge about this period is vital in order to understand and model future climate scenarios both as a result of natural climate variation and the effects of global warming. Oceanic heat flux is important for the sensitive climate regime of northern Europe. Our aim is to connect hydrographical changes, reflected by the dinoflagellates cyst (dinocysts) assemblages in the sediments in the Malangen fjord, to local and regional climatic phases. Previous studies have shown that dinocyst assemblages are influenced by temperature, salinity, and the availability of nutrients (e.g. de Vernal et al. 2005, doi:10.1016/j.quascirev.2004.06.014; de Vernal et al. 2001, doi:10.1002/jqs.659; Grosfjeld et al. this volume; Rochon et al. 2008, doi:10.1016/j.marmicro.2008.04.001; Solignac et al. this volume). Dinoflagellates are mostly unicellular organisms that make up one of the main groups of phytoplankton. They are able to regulate their depth within the photic zone and to concentrate along oceanic fronts, which provide nutrient-enriched waters. The dinoflagellate cysts are the hypnozygotes of dinoflagellates naturally produced during the life cycle. Their wall is composed of a highly resistant organic material, which has a high potential to fossilize. Because dinocysts species are linked to particular abiotic and biotic parameters, the dinocyst assemblages provide information about past surface water conditions. Since each fjord has its own hydrographic setting, it is necessary to establish a firm link between the dinocyst composition of the sediment surface samples and the surface water conditions. Indeed the modern dinocyst distribution in subarctic fjords is little known. Thus, in addition to detailing dinocyst results from two shallow cores, several sediment surface samples located along a transect running from the head to the mouth of the fjord, and extending onto the shelf, are also presented.

Digital surface model, hillshade and orthophoto of the world's largest fossil oyster reef, links to GeoTIFFs

The world's largest fossil oyster reef, formed by the giant oyster Crassostrea gryphoides and located in Stetten (north of Vienna, Austria) is studied by Harzhauser et al., 2015, 2016; Djuricic et al., 2016. Digital documentation of the unique geological site is provided by terrestrial laser scanning (TLS) at the millimeter scale. Obtaining meaningful results is not merely a matter of data acquisition with a suitable device; it requires proper planning, data management, and postprocessing. Terrestrial laser scanning technology has a high potential for providing precise 3D mapping that serves as the basis for automatic object detection in different scenarios; however, it faces challenges in the presence of large amounts of data and the irregular geometry of an oyster reef. We provide a detailed description of the techniques and strategy used for data collection and processing in Djuricic et al., 2016. The use of laser scanning provided the ability to measure surface points of 46,840 (estimated) shells. They are up to 60-cm-long oyster specimens, and their surfaces are modeled with a high accuracy of 1 mm. In addition to laser scanning measurements, more than 300 photographs were captured, and an orthophoto mosaic was generated with a ground sampling distance (GSD) of 0.5 mm. This high-resolution 3D information and the photographic texture serve as the basis for ongoing and future geological and paleontological analyses. Moreover, they provide unprecedented documentation for conservation issues at a unique natural heritage site.

A stereo-image analysis JAVA software with links to executable and source code

Scientists planning to use underwater stereoscopic image technologies are often faced with numerous problems during the methodological implementations: commercial equipment is too expensive; the setup or calibration is too complex; or the imaging processing (i.e. measuring objects in the stereo-images) is too complicated to be performed without a time-consuming phase of training and evaluation. The present paper addresses some of these problems and describes a workflow for stereoscopic measurements for marine biologists. It also provides instructions on how to assemble an underwater stereo-photographic system with two digital consumer cameras and gives step-by-step guidelines for setting up the hardware. The second part details a software procedure to correct stereo-image pairs for lens distortions, which is especially important when using cameras with non-calibrated optical units. The final part presents a guide to the process of measuring the lengths (or distances) of objects in stereoscopic image pairs. To reveal the applicability and the restrictions of the described systems and to test the effects of different types of camera (a compact camera and an SLR type), experiments were performed to determine the precision and accuracy of two generic stereo-imaging units: a diver-operated system based on two Olympus Mju 1030SW compact cameras and a cable-connected observatory system based on two Canon 1100D SLR cameras. In the simplest setup without any correction for lens distortion, the low-budget Olympus Mju 1030SW system achieved mean accuracy errors (percentage deviation of a measurement from the object's real size) between 10.2 and -7.6% (overall mean value: -0.6%), depending on the size, orientation and distance of the measured object from the camera. With the single lens reflex (SLR) system, very similar values between 10.1% and -3.4% (overall mean value: -1.2%) were observed. Correction of the lens distortion significantly improved the mean accuracy errors of either system. Even more, system precision (spread of the accuracy) improved significantly in both systems. Neither the use of a wide-angle converter nor multiple reassembly of the system had a significant negative effect on the results. The study shows that underwater stereophotography, independent of the system, has a high potential for robust and non-destructive in situ sampling and can be used without prior specialist training.

Long chain diols and diol indices of surface sediments of the Iberian Atlantic margin

Long chain diols are lipids that have gained interest over the last years due to their high potential to serve as biomarkers and diol indices have been proposed to reconstruct upwelling conditions and sea surface temperature (SST). However, little is known about the sources of the diols and the mechanisms impacting their distribution. Here we studied the factors controlling diol distributions in the Iberian Atlantic margin, which is characterized by a dynamic continental shelf under the influence of upwelling of nutrient-rich cold deep waters, and fluvial input. We analyzed suspended particulate matter (SPM) of the Tagus river, marine SPM and marine surface sediments along five transects off the Iberian margin, as well as riverbank sediments and soil from the catchment area of the Tagus river. Relatively high fractional abundances of the C32 1,15-diol (normalized with respect to the 1,13- and 1,15-diols) were observed in surface sediments in front of major river mouths and this abundance correlates strongly with the BIT index, a tracer for continental input of organic carbon. Together with an even higher fractional abundance of the C32 1,15-diol in the Tagus river SPM, and the absence of long chain diols in the watershed riverbank sediments and soils, we suggest that this long chain diol is produced in-situ in the river. Further support for this hypothesis comes from the small but distinct stable carbon isotopic difference of 1.3? with the marine C28 1,13-diol. The 1,14-diols are relatively abundant in surface sediments directly along the northern part of the coast, close to the upwelling zone, suggesting that Diol Indices based on 1,14-diols would work well as upwelling tracers in this region. Strikingly, we observed a significant difference in stable carbon isotopic composition between the monounsaturated C30:1 1,14- and the saturated C28 1,14-diol (3.8±0.7 per mil), suggesting different sources, in accordance with their different distributions. In addition, the Long chain Diol Index (LDI), a proxy for sea surface temperature, was applied for the surface sediments. The results correlate well with satellite SSTs offshore but reveal a significant discrepancy with satellite-derived SSTs in front of the Tagus and Sado rivers. This suggests that river outflow might compromise the applicability of this proxy.

Experiment on inter- and intra-specific phenotypic plasticity of three phytoplankton species in response to ocean acidification

Phenotypic plasticity describes the phenotypic adjustment of the same genotype to different environmental conditions and is best described by a reaction norm. We focus on the effect of ocean acidification (OA) on inter - and intraspecific reaction norms of three globally important phytoplankton species (Emiliania huxleyi, Gephyrocapsa oceanica, Chaetoceros affinis). Despite significant differences in growth rates between the species, they all showed a high potential for phenotypic buffering (no significant difference in growth rates between ambient and high CO2 condition). Only three coccolithophore genotypes showed a reduced growth in high CO2. Largely diverging responses to high CO2 of single coc-colithophore genotypes compared to the respective mean species responses, however, raise the question if an extrapolation to the population level is possible from single genotype experiments. We therefore compared the mean response of all tested genotypes to a total species response comprising the same genotypes, which was not significantly different in the coccolithophores. Assessing species reac-tion norm to different environmental conditions on short time scale in a genotype-mix could thus reduce sampling effort while increasing predictive power.

Enviromagnetic, major element, and grain-size analyses of surface sediment samples along the continental margin between East Brazil and Patagonia

Continental margin sediments of SE South America originate from various terrestrial sources, each conveying specific magnetic and element signatures. Here, we aim to identify the sources and transport characteristics of shelf and slope sediments deposited between East Brazil and Patagonia (20°-48°S) using enviromagnetic, major element, and grain-size data. A set of five source-indicative parameters (i.e., chi-fd%, ARM/IRM, S0.3T, SIRM/Fe and Fe/K) of 25 surface samples (16-1805 m water depth) was analyzed by fuzzy c-means clustering and non-linear mapping to depict and unmix sediment-province characteristics. This multivariate approach yields three regionally coherent sediment provinces with petrologically and climatically distinct source regions. The southernmost province is entirely restricted to the slope off the Argentinean Pampas and has been identified as relict Andean-sourced sands with coarse unaltered magnetite. The direct transport to the slope was enabled by Rio Colorado and Rio Negro meltwaters during glacial and deglacial phases of low sea level. The adjacent shelf province consists of coastal loessoidal sands (highest hematite and goethite proportions) delivered from the Argentinean Pampas by wave erosion and westerly winds. The northernmost province includes the Plata mudbelt and Rio Grande Cone. It contains tropically weathered clayey silts from the La Plata Drainage Basin with pronounced proportions of fine magnetite, which were distributed up to ~24° S by the Brazilian Coastal Current and admixed to coarser relict sediments of Pampean loessoidal origin. Grain-size analyses of all samples showed that sediment fractionation during transport and deposition had little impact on magnetic and element source characteristics. This study corroborates the high potential of the chosen approach to access sediment origin in regions with contrasting sediment sources, complex transport dynamics, and large grain-size variability.