Long-term environmental time series of continuously collected data in hydroelectric reservoirs in Brazil

Long-term environmental time series of continuously collected data are fundamental to identify and classify pulses and determine their role in aquatic systems. This paper presents a web based archive for limnological and meteorological data collected by integrated system for environmental monitoring (SIMA). The environmental parameters that are measured by SIMA are: chlorophyll-a (µg/L), water surface temperature (ºC), water column temperature by a thermistor string (ºC), turbidity (NTU), pH, dissolved oxygen concentration (mg/L), electric conductivity (µS/cm), wind speed (m/s) and direction (º), relative humidity (%), short wave radiation (W/m**2), barometric pressure (hPa). The data are collected in preprogrammed time interval (1 hour) and are transmitted by satellite in quasi-real time for any user in a range of 2500 km from the acquisition point. So far 11 hydroelectric reservoirs being monitored using the SIMA buoy. A basic statistics (mean and standard deviation) for some parameters and an example of time series were displayed. The main observed problem are divided into sensors and satellite. The sensors problems is due to the environmental characteristics of each water body. In acid waters the sensors of water quality rapidly degrade, and the collected data are invalid. Another problem is the infestation of periphyton in the sensor. SIMA buoy makes the parameters readings every hour, or 24 readings per day. However, not always received all readings because the system requires satellites passing over the buoy antenna to complete the transfer and due to the satellite constellation position, some locations inland are not met as often as necessary to complete all transmissions. This is the more often causes for lack in the time series.

Supplemental Data - Bioremediation of polluted air from an industrial plant using rotating biofilter reactor-based technology

Two microbial isolates (HDB, Hydrogen-Degrading Bacteria) obtained from industrial wastewater were inoculated into the rotating biofilter reactor 'Biowheel 2.0' and tested for the ability to purify gaseous flows containing benzene and non-methane volatile organic compounds (NMVOCs) released at an industrial plant. Different classes of gaseous flow were tested, namely 'cold box', 'in shell', and 'mix', all of them associated with the industrial process of 'mold-casting'. A significant increase in Removal Efficiency (RE) was recorded for benzene and NMVOCs in the inoculated 'Biowheel 2.0' biofilter, compared to uninoculated control. For each type of gaseous flow, odor impact was evaluated in the inlet and outlet flows at the industrial plant, using the test panel method and electronic nose technology. A significant drop in the amount of Olfactometric Units (O.U.) m-3 occurred in the gaseous flows treated with the bacterial consortium. The reported data demonstrate the ability of the consortium to degrade hydrocarbons, revealing its potential for bioremediation of polluted air emissions occurring at industrial plants.

Sediment temperatures of the Håkon Mosby mud volcano measured continuously with a short temperature lance (LOOME)

The short sediment temperature probe were deployed and recovered with the LOOME observatory in 2009 and 2010, respectively. In addition to temperature, the loggers also recorded bottom water pressure at a sampling interval of 20 minutes. Even though the data obtained from the short temperature probe was strongly disturbed by leakage through a corroded connector, the data shows clearly that the probe was pulled out of the sediment on October 26, 2009, presumably by advancing mud flows.