Cenozoic magnetostratigraphy of ODP holes 113-689B and 113-690B

A detailed paleomagnetic study was carried out on biosiliceous and calcareous sediments drilled on Maud Rise, Antarctica, during ODP Leg 113. High-quality APC sections were retrieved in the upper 220 m of Holes 689B and 690B. Average deposition rates range from 3 to 15 m/m.y. A close (25 cm) paleomagnetic sample spacing provided a medium-resolution magnetostratigraphic sequence for the Paleogene and Neogene. Paleomagnetic samples were demagnetized stepwise by alternating fields, and characteristic remanent magnetization directions were derived from detailed vector and difference vector component analysis. A magnetochronologic framework has been established for the first time for the Southern Ocean sedimentary sequences spanning Paleocene to Oligocene and middle Miocene to early Pliocene times. Biosiliceous and calcareous microfossil stratigraphies were used to constrain magnetostratigraphic age assignments. Although average sedimentation rates were rather low, nearly complete sections of the geomagnetic polarity time scale (e.g., Chrons C5 and C5A) could be correlated with the inferred polarity pattern. Miocene and Pliocene records are marked by a high number of hiatuses mainly identified by diatom biostratigraphy. Good paleomagnetic correlation between the two holes is afforded in particular in the middle to upper Miocene. Oligocene magnetostratigraphy reveals a high-quality paleomagnetic record with a mostly complete Oligocene section in Hole 689B at ~5 m/m.y. deposition rate. Hole 690B exhibits higher deposition rates (7-12 m/m.y.), although two hiatuses are present. Early and late Eocene sedimentary sequences could be analyzed in both holes, but in Hole 689B middle Eocene chrons were disrupted by hiatuses and only incomplete polarity intervals C21 and C24 were encountered. Highest resolution (14 m/m.y.) was achieved in Hole 690B in a complete early Eocene and late Paleocene sequence from Chrons C23 to C26, with a number of short polarity intervals detected within Chrons C24 and C25.

Paleomagnetic reconstructions of sediments at ODP Sites 135-840 and 135-841

The geometry of the Tonga Arc implies that it has rotated approximately 17° clockwise away from the Lau Ridge as the Lau Basin formed in between. Questions have arisen about the timing of the opening, whether the arc behaved rigidly, and whether the opening occurred instead from motion of the Lau Ridge, the remanent arc. We undertook to address these questions by taking paleomagnetic samples from sediment cores drilled on the Tonga Arc at Sites 840 and 841, orienting the samples in azimuth, and comparing the paleodeclinations to expected directions. Advanced hydraulic piston corer (APC) cores from Holes 840C and 841A were oriented during drilling with a tool based on a magnetic compass and attached to the core barrel. Samples from Hole 841B were drilled with a rotary core barrel (RCB) and therefore are azimuthally unoriented. They were oriented by identifying faults and dipping beds in the core and aligning them with the same features in the Formation MicroScanner (FMS) wireline logs, which were themselves oriented with a three-axis magnetometer in the FMS tool. The best results came from the APC cores, which yielded a mean pole at -69.0°S, 112.2°E for an age of 4 Ma. This pole implies a declination anomaly of 20.8° ± 12.6° (95% confidence limit), which appears to have occurred by tectonic rotation of the Tonga Arc. This value is almost exactly that expected from the geometry of the arc and implies that it did indeed rotate clockwise as a rigid body. The large uncertainty in azimuth results from core orientation errors, which have an average standard deviation of 18.6°. The youngest cores used to calculate the APC pole contain sediments deposited during Subchron 2A (2.48-3.40 Ma), and their declinations are indistinguishable from the others. This observation suggests that most of the rotation occurred after their deposition; this conclusion must be treated with caution, however, because of the large azimuthal orientation errors. Poles from late and early Miocene sediments of Hole 841B are more difficult to interpret. Samples from this hole are mostly normal in polarity, fail a reversal test, and yield poles that suggest that the normal-polarity directions may be a recent overprint. Late Miocene reversed-polarity samples may be unaffected by this overprint; if so, they imply a declination anomaly of 51.1° ± 11.5°. This observation may indicate that, for older sediments, Tonga forearc rotations are larger than expected.

Index properties, consolidation characteristics and sediment rebound of ODP Sites 167-1020 and 167-1021 sediments

Drilling during Leg 167 at the California margin was scheduled to recover continuous sedimentary sections. Multiple advanced piston core (APC) holes drilled at different depth offsets provided core overlap in successive APCs. Correlation of high-resolution laboratory physical properties data from adjacent APC holes was used to compile composite depth sections for each site. The composite depth sections were used to confirm continuous recovery and enable high-resolution sampling. The meters composite depth (mcd) scale differs from the shipboard meters below seafloor (mbsf) scale because of (1) core expansion following recovery (MacKillop et al., 1995, doi:10.2973/odp.proc.sr.138.118.1995), (2) coring gaps, and (3) stretching/compression of sediment during coring (Lyle, Koizumi, Richter, et al., 1997, doi:10.2973/odp.proc.ir.167.1997). Moran (1997, doi:10.2973/odp.proc.sr.154.132.1997) calculated that sediment expansion accounted for 90%-95% of the Leg 154 depth offset between shipboard mbsf and the mcd scales. Terzaghi's one-dimensional theory of consolidation (Terzaghi, 1943) describes the response of sediments to stress loading and release. Mechanical loading in marine environments is provided by the buoyant weight of the overlying sediments. The load increases with depth below seabed, resulting in sediment volume reduction as water is "squeezed" out of the voids in the sediment. Stress release during core recovery results in expansion of the sediment and volume increase as water returns to the sediment. The sediment expansion or rebound defines the elastic properties of the sediment. In this study we examine the elastic deformation properties of sediments recovered from Sites 1020 and 1021. These results are used to (1) correct the laboratory index properties measurements to in situ values and (2) determine the contribution of sediment rebound to the depth offset between the mbsf and mcd scales.

Rock-magnetic data of ODP Site 105-645 (Appendix)

We present the rock-magnetic stratigraphy for Ocean Drilling Program (ODP) Leg 105, Site 645 (Baffin Bay). Variations in magnetic mineral concentration (X) and particle size (XAKM/X) are used to correlate advanced piston corer (APC) cores from several holes at Site 645. Downsite variations in rock-magnetic parameters and carbonate content are placed within the framework of inferred changes in sedimentation. These results suggest an initiation of Northern Hemisphere ice rafting in Baffin Bay in the early-late Pliocene (approximately 3.4 Ma).

Polarity chron boundaries and interval sedimentation rates of ODP Leg 162 sites

Magnetic polarity stratigraphies for Sites 980-984 are based on shipboard measurements from the pass-through magnetometer after alternating field (AF) demagnetization at a peak field of 25 mT and shore-based stepwise AF demagnetization of discrete samples. The characteristic magnetization component was determined after AF demagnetization removed the steep downward drill-string-related magnetic overprint. Peak AF fields in the 20-30 mT range were required to resolve the component, carried by magnetite, that was used to produce unambiguous Pliocene-Pleistocene magnetic stratigraphies at all five sites. At Sites 980 and 983, magnetic stratigraphies were resolved to the base of the recovered advanced hydraulic piston corer (APC) section, which lies in the Matuyama Chron (1r.2r) and Olduvai Subchron (2n), respectively. At Sites 981 and 982, magnetization intensities decrease sharply in the normal polarity zone corresponding to the Gauss Chron (2An), and magnetic stratigraphies below this level could not be resolved. At Site 984, the resolution of magnetic stratigraphy was curtailed at ~250 meters below seafloor (Olduvai Subchron) by core deformation at the base of the APC section and in the underlying extended core barrel section. As the magnetic stratigraphies at all four sites are unequivocal, polarity chron interpretations can be made without aid from the biostratigraphy. Mean sedimentation rates within polarity chrons have been calculated and Pliocene-Pleistocene biomagnetostratigraphic correlations tested.

(Table 1) Magnetic susceptibility, lithologic composition and stable isotope record for ODP Hole 132-810C

Site 810 was drilled atop Shatsky Rise during Ocean Drilling Program (ODP) Leg 132. The principal objective at Site 810 was to drill interbedded cherts and chalks of Mesozoic age using the diamond coring system (DCS). The objective was not achieved because of difficulties in setting up the reentry cone on the seafloor; however, a shortened section of Cretaceous-Cenozoic nannofossil ooze was recovered with the advanced piston corer (APC). Although the section is interrupted by hiatuses, the upper 50 m carry detailed information relating to biogenic productivity, water chemistry, and eolian input during the Pliocene and Pleistocene. Four holes were drilled at Site 810. Hole 810A consists of a single mud-line core for an ongoing ODP geriatric study. The second hole (Hole 810B) was washed to 60 mbsf (without core recovery) to provide information required for setting the 16-in. casing attached to the reentry cone. Hole 810C penetrated 136.1 mbsf, mostly with the APC, with a total recovery of 143.81 m of nannofossil ooze. A reentry cone was placed over Hole 810D but no casing was successfully suspended in the hole and no sediment was cored. This data report presents the results of shore-based high-resolution analyses of carbonate and oxygen isotopic variations in the upper 50 m of the section at Site 810 and compares these variations with the shipboard determinations of magnetic susceptibility and GRAPE bulk density from the multisensor track.

Gas, water and volume characteristics during controlled degassing experiments on ODP Leg 164 PCS cores

A pressurized core with CH4 hydrate or dissolved CH4 should evolve gas volumes in a predictable manner as pressure is released over time at isothermal conditions. Incremental gas volumes were collected as pressure was released over time from 29 pressure core sampler (PCS) cores from Sites 994, 995, 996, and 997 on the Blake Ridge. Most of these cores were kept at or near 0ºC with an ice bath, and many of these cores yielded substantial quantities of CH4. Volume-pressure plots were constructed for 20 of these cores. Only five plots conform to expected volume and pressure changes for sediment cores with CH4 hydrate under initial pressure and temperature conditions. However, other evidence suggests that sediment in these five and at least five other PCS cores contained CH4 hydrate before core recovery and gas release. Detection of CH4 hydrate in a pressurized sediment core through volume-pressure relationships is complicated by two factors. First, significant quantities of CH4-poor borehole water fill the PCS and come into contact with the core. This leads to dilution of CH4 concentration in interstitial water and, in many cases, decomposition of CH4 hydrate before a degassing experiment begins. Second, degassing experiments were conducted after the PCS had equilibrated in an ice-water bath (0ºC). This temperature is significantly lower than in situ values in the sediment formation before core recovery. Our results and interpretations for PCS cores collected on Leg 164 imply that pressurized containers formerly used by the Deep Sea Drilling Project (DSDP) and currently used by ODP are not appropriately designed for direct detection of gas hydrate in sediment at in situ conditions through volume-pressure relationships.