Description and composition iron-manganese concretions from the Pacific

One the most interesting features of ocean sedimentation is the manganese formations on the surface of the ocean floor in some areas. These are especially widespread in the Pacific Ocean as concretions, grains, and crusts on rock fragments and bedrock outcrops. Iron-manganese concretions are the most abundant as they completely cover about 10% of the bottom of the Pacific Ocean where there are ore concentrations. The concretions occupy from 20-50% of the bottom and up to 80-90% on separate submarine rises. Such concretions are found in different types of bottom deposits, from abyssal red clays to terrigenous muds, but they occur most widely in red clays and quite often in carbonate muds. Their shape and their dimensions are very diverse and change from place to place, from station to station, varying from 0.5-20 cm. They may be oval, globular, reniform, or slaggy and often they are fiat or isometric concretions of an indefinite shape. The concretions generally have nuclei of pumice, basalt fragments, clayey and tuffaceous material, sharks' teeth, whale ossicles, and fossil sponges. Most concretions have concentric layers, combined with dendritic ramifications of iron and manganese oxides.

Chemical composition of a manganese nodule from the Tiki Basin, Touamotou Archipelago, Pacific Ocean

The text studies the deep-sea red clays in the East-Central Pacific ocean (Tahiti-Touamotou Archipelago), their authigenic formation, transport and diagenetic character in particular through their composition in REE.

Annotated record of the detailed examination of Mn deposits from DSDP Site 160, Leg 16 (Cores 16-160-1, 16-160-2 and 16-160-3)

DSDP 160 forms part of a series of sites in the eastern equatorial Pacific on the west flank of the East Pacific Rise. Earlier legs of the Deep Sea Drilling Project, in particular Legs 5 and 9, have reported sediments rich in oxides of iron and perhaps other transition metals just above basement in the eastern Pacific. These occurrences roughly define a broad zone on the west flank of the rise. Site DSDP 160 lies on this trend and were selected by the Pacific Site Selection Panel to test the extent of such deposits.

Annotated record of the detailed examination of Mn deposits from DSDP Site 161, Leg 16 (Cores 16-161-1 and 16-161A-14)

DSDP 161 is located on the lower west flank of the East Pacific Rise about midway between the Clipperton and Clarion fracture zones which define the boundaries of a large structural block in the eastern Pacific. The site is about 4,000 km west of the present crest of the Rise. It is located near the northern edge of a zone of thick Cenozoic sediments which marks the general location of the equatorial zone of high biological productivity.

Chemical composition of manganese micronodules from expedition VA-05/1 in the Pacific Ocean

A radioisotope energy-dispersive X-ray (EDX) system has been used on board the German research vessel "Valdivia" during an exploration expedition in the northern equatorial Pacific in 1973. The instrumentation used consisted of an X-ray detection system incorporating a 30 mm2 effective-area Si (Li) detector with a measured energy resolution of 195 eV for Mn K alpha X-rays, standard nuclear electronics, a 1024-channel analyser and a data read-out unit. The X-ray spectra in the manganese-nodule samples were excited by a 30-mCi 238Pu source. The six elements Mn, Fe, Co, Ni, Cu and Zn were analysed on board. Precision values for the analyses were less than 3% for Mn, Fe, Ni, Cu and Zn and about 5% for Co. A total amount of 350 analyses was carried out during a one-month cruise. Average contents of 190 analysed whole manganese-nodule samples from all the sampling sites of the covered area were 23.3% Mn, 6.7% Fe, 0.23% Co, 1.16% Ni, 0.94% Cu and 0.10% Zn. The average content of the base metals expressed as the sum of the Co, Ni, Cu and Zn contents was 2.48%. A linear relationship between Mn and Ni in all analysed samples, including whole manganese-nodule samples, zones of manganese nodules and manganese crusts, was observed. The Mn/Ni ratio calculated by regression analysis was 23.0. Zonal variations of the chemical contents of the six elements in the manganese nodules were found. A size classification of the manganese nodules has been suggested. Geochemical correlations of Cu and Ni versus Mn/Fe in the investigated samples are given.

Manganese nodule geochemistry from the Challenger Expedition

C. W. Gümbel received nodules from J. Murray which were collected at a depth of 2740 fathoms, between Japan and the Sandwich Islands, by the "Challenger" Expedition. They were either round or long in shape, with a dull, dirty-brown coloured surface, and enclosed fragments of pumice-stone, and more rarely teeth of sharks or fragments of mussels. They were analysed by A. Schwager.

Bomb-tritium input function calculated from the details of the nuclear atmospheric bomb tests released by the UNSCEAR [2000]

Improving the representation of the hydrological cycle in Atmospheric General Circulation Models (AGCMs) is one of the main challenges in modeling the Earth's climate system. One way to evaluate model performance is to simulate the transport of water isotopes. Among those available, tritium (HTO) is an extremely valuable tracer, because its content in the different reservoirs involved in the water cycle (stratosphere, troposphere, ocean) varies by order of magnitude. Previous work incorporated natural tritium into LMDZ-iso, a version of the LMDZ general circulation model enhanced by water isotope diagnostics. Here for the first time, the anthropogenic tritium injected by each of the atmospheric nuclear-bomb tests between 1945 and 1980 has been first estimated and further implemented in the model; it creates an opportunity to evaluate certain aspects of LDMZ over several decades by following the bomb-tritium transient signal through the hydrological cycle. Simulations of tritium in water vapor and precipitation for the period 1950-2008, with both natural and anthropogenic components, are presented in this study. LMDZ-iso satisfactorily reproduces the general shape of the temporal evolution of tritium. However, LMDZ-iso simulates too high a bomb-tritium peak followed by too strong a decrease of tritium in precipitation. The too diffusive vertical advection in AGCMs crucially affects the residence time of tritium in the stratosphere. This insight into model performance demonstrates that the implementation of tritium in an AGCM provides a new and valuable test of the modeled atmospheric transport, complementing water stable isotope modeling.

Chemical composition of nodules from two locations in the Pacific Ocean using different methods

Manganese nodules recovered in the Pacific Ocean by the U. S. Bureau of Mines and by DeepSea Ventures Ltd. are studied for their chemical composition using X microprobe and X-ray fluorescence methods.

Stable isotope ratios of benthic foraminifera stable from Miocene Pacific sediments, DSDP Leg 29, Site 281 (Table 2)

Seven Miocene Pacific Ocean Deep Sea Drilling Project sites from four different water masses (planktonic foraminiferal biogeographic regions) have been correlated using 18 prominent carbon isotopic events defined in the benthic foraminiferal delta13C records in DSDP Site 289. The correlations are based on the assumption that there are global or at least Pacific-wide controls on the delta13C of deep-water [HCO3]**-. Each of the individual delta13C records is correlated to Site 289 based on the shape of the curves in a manner analogous to that used to correlate sea-floor magnetic anomaly patterns. The results of this correlation experiment confirm that planktonic foraminiferal biostratigraphy and carbon isotopic stratigraphy are consistent within the tropical surface water mass and precise to +/-100,000 years. Correlations between surface water masses suggest that the precision of foraminiferal biostratigraphy is on the average less than +/-200,000 years due to the lack of cosmopolitan marker species and diachronism of species occurrences. Carbon isotope stratigraphy used in conjunction with biostratigraphy has the potential to provide an easily utilized, globally applicable, correlation tool (with an interregional precision of +/-100,000 years or better) as more continuous and undisturbed deep-sea sections become available as a result of the Hydraulic Piston Coring Program.

Depth, age, strontium isotopic ratios and trace elemental ratios of samples from thirteen DSDP and ODP holes

Large variations exist between published mid-Cretaceous (late Barremian to early Turonian stages) seawater Sr-isotope stratigraphies; this has resulted in disparate interpretations of crustal production rates. We report on a detailed investigation of seawater Sr-isotope stratigraphy based on foraminifers and, where available, on inoceramid bivalves from 12 mid-Cretaceous Deep Sea Drilling Project and Ocean Drilling Program sections. The effects of diagenesis are assessed using scanning electron microscope observations and trace-elemental analyses, but are best distinguished by comparing the 87Sr/86Sr values of similar-age samples from different sites. Strontium-isotope analyses compiled from 9 of 12 sites that have detailed age control define one band of common values. This band is used as a composite curve, which presumably represents seawater 87Sr/86Sr values. The composite curve shows a "trough" of markedly lower 87Sr/86Sr values in the Aptian and early Albian stages, higher but constant values for the middle Albian-Cenomanian stages, followed by a decrease in 87Sr/86Sr values in the early Turonian. Variations between published mid-Cretaceous Sr-isotope records result from diagenetic alteration, analytical problems, and the diverse biostratigraphic approaches and assumptions used to estimate sample ages. When preexisting age data are made consistent, the composite record shows close similarities with data sets derived from measurements of macrofossils in land sections of Europe and North America. The interval of decreased 87Sr/86Sr values in the Aptian-Albian stages overlaps with the pulse of mid-plate volcanic activity that produced the Ontong Java, Manihiki, and Kerguelen Plateaus. The exact age and the shape of the trough, however, are consistent with increased spreading rates at oceanic ridges, given the existing data on the timing of mid-plate volcanic activity.