Physical properties and sedimentology on core GeoB1510-1

Detailed information about the sediment properties and microstructure can be provided through the analysis of digital ultrasonic P wave seismograms recorded automatically during full waveform core logging. The physical parameter which predominantly affects the elastic wave propagation in water-saturated sediments is the P wave attenuation coefficient. The related sedimentological parameter is the grain size distribution. A set of high-resolution ultrasonic transmission seismograms (ca. 50-500 kHz), which indicate downcore variations in the grain size by their signal shape and frequency content, are presented. Layers of coarse-grained foraminiferal ooze can be identified by highly attenuated P waves, whereas almost unattenuated waves are recorded in fine-grained areas of nannofossil ooze. Color-encoded pixel graphics of the seismograms and instantaneous frequencies present full waveform images of the lithology and attenuation. A modified spectral difference method is introduced to determine the attenuation coefficient and its power law a = kfn. Applied to synthetic seismograms derived using a "constant Q" model, even low attenuation coefficients can be quantified. A downcore analysis gives an attenuation log which ranges from ca. 700 dB/m at 400 kHz and a power of n = 1-2 in coarse-grained sands to few decibels per meter and n ? 0.5 in fine-grained clays. A least squares fit of a second degree polynomial describes the mutual relationship between the mean grain size and the attenuation coefficient. When it is used to predict the mean grain size, an almost perfect coincidence with the values derived from sedimentological measurements is achieved.

Tab. 1+2: C14-dates cf the older and younger emergence periods

In the neighbourhood of Oobloyah Bay various phenomena ean be eneountered whieh point to a ularge-seale uplift of shorelines, i.e. to an emergence of 200 m. Delta terraces, deltaic fan terraces and glacio-marine sands are regarded by the author as being the most reliable evidence of this. The marine limit documented by glacio-marine sand is to be found at ~170 m a.s.l. Hints of ancient shorelines located at a higher level exist only in the shape of badly preserved raised beaches. They were classified as less reliable records of past sea-levels, due to the lack of marine fossils and/or drift wood, and furthermore because those forms had been strongly influenced by periglacial processes. Deltaic deposits are of more importance in this context. The glacio-marine deltaic sands of several terrace levels contain terrestrial plant remnants which delivered C14dates. Using these dates und the relative elevations of terraces the emergenee of the area investigated could be recorded. This occured in a series of phases (and steps) which were summarized into two periods: an early period of emergenee which took place from at least 25 300 years B.P. to later than 17 340 years B.P. and a later one from at least 12 870 years B.P. up to the present day. The emergence seems to represent a discontinuous but regular sequence of relative sea level movements without intermittent submergence. Since the deltaic fans of the early emergence period were accumulated by sediments through glacio-fluvial channels of an adjacent glacier body the appropriate location of this glacial stage for one of the glaciers delivering meltwater (Nukapingwa Glacier) could be reconstructed. This stage of the glacier appears to belong to a retreating phase of the Mid-Wisconsin (?). The later period of emergence resulted in six rather glacio-marine delta terrace generations at the mouths of the main rivers with glaciofluvial regimen debouching into the Oobloyah Bay. A connection of this emergence with the glacial history of the field area is discussed. If one may rely on the age determinations of land derived plant fossils and their application for the climatic history of the area investigated, it must be concluded that the Heidelberg Valley, to a large extent, was alreaely deglaciated 25 000 years ago. The existence of a "Cockburn"-Phase in the sense of a major readvanee in Late Wisconsin times appears to be doubtful, or has been developed rather weakly.

Petrology at DSDP Leg 66 Holes

The sandstone petrology of Leg 66 samples provides insights into changes through time in the geology of the source regions along the Guerrero portion of the Middle America continental margin. This in turn constrains possible models of the evolution of the Middle America Trench (e.g., de Czerna, 1971; Malfait and Dinkleman, 1972; Karig, 1974). Primarily medium-grained sands and sandstones, representing the widest variety available of trench/trench slope settings and ages, were analyzed in both light and heavy mineral studies. Standard techniques were used as much as possible in order to compare results from other margins and from ancient rocks.

Composition of ODP Leg 126 sandstones

Early diagenesis in Leg 126 forearc and backarc sands/sandstones is characterized by the dissolution of intermediate to mafic brown glass, the alteration of colorless rhyolitic glass to clay minerals, precipitation of thin clay-mineral rim cements, and minor precipitation of clinoptilolite cements. Later, more intense diagenesis is restricted to Oligocene forearc basin sediments at Sites 787,792, and 793. In these sections, the effects of early diagenesis have been intensified and overprinted by later diagenetic effects including (1) large-scale dissolution of feldspar and pyroxene crystals, (2) further dissolution of vitric components, (3) precipitation of minor carbonate cements, and (4) pervasive, multiple-staged zeolite cementation. Zeolite minerals present include analcite, mordenite, natrolite, heulandite, wairakite, chabazite, erionite, herschelite, and phillipsite. The latest diagenetic events appear to be the minor dissolution of zeolite cements and the precipitation of minor carbonate and potassium feldspar(?) cements. Observed porosity types include primary interparticles; primary intraparticles in vesicular glass and foraminifers; primary interparticles reduced by compaction and cementation; secondary intraparticles produced by dissolution of feldspar, nonopaque heavy minerals, volcanic glass, and foraminifer tests; and secondary interparticles produced by the dissolution of zeolite cements. Within forearc Oligocene sections at Sites 787 and 792, diagenetic effects appear to decrease with depth in the Oligocene section; however, at Site 793 the majority of samples are intensely altered.

Magnetic properties and sand composition at DSDP Site 87-582 and Hole 87-583D

At Site 582, DSDP Leg 87, turbidites about 560 m thick were recovered from the floor of the Nankai Trough. A turbidite bed is typically composed of three subdivisions: a lower graded sand unit, an upper massive silt unit, and an uppermost Chondrites burrowed silt unit. The turbidites intercalate with bluish gray hemipelagic mud which apparently accumulated below the calcite compensation depth. In order to investigate the nature and provenance of the turbidites, we studied the grain orientation, based on magnetic fabric measurements and thin-section grain counting, and grain size, using a photo-extinction settling tube and detrital modal analysis. The following results were obtained: (1) grain orientation analysis indicates that the turbidity current transport parallels the trench axis, predominantly from the northeast; (2) Nankai Trough turbidites generally decrease in grain size to the southwest; (3) turbidite sands include skeletal remains indicative of fresh-water and shallow-marine environments; and (4) turbidites contain abundant volcanic components, and their composition is analogous to the sediments of the Fuji River-Suruga Bay area. Considering other evidence, such as physiography and geometry of trench fill, we conclude that the turbidites of Site 582 as well as Site 583 were derived predominantly from the mouth of Fuji River and were transported through the Suruga Trough to the Nankai Trough, a distance of some 700 km. This turbidite transport system has tectonic implications: (1) the filling of the Nankai Trough is the direct consequence of the Izu collision in Pliocene- Pleistocene times; (2) the accretion of trench fill at the trench inner slope observed in the Nankai Trough is controlled by collision tectonics; and (3) each event of turbidite deposition may be related to a Tokai mega-earthquake.

Distribution of benthic foraminifers in surface layer of bottom sediments from the littoral zone of the Kunashir Island, South Kuriles

Composition and abundance of modern benthic foraminifers in the littoral zone of the Kunashir Island (South Kuriles) were studied. This littoral zone was examined on the sides of the Sea of Okhotsk, the Pacific Ocean, and the Izmena Bay. In the littoral zone of the Izmena Bay benthic foraminifers were not found. The highest biodiversity and maximal density of foraminifers were observed at a bench among rocks and blocks, in depressions of various size and depth (baths), at places where algae and water plants were attached, on silty sands, and on sands with admixture of broken shells, silt, and clastic matter composing the coast. The lowest density and biodiversity were found in mouths of creeks and rivers, on rock plates free from sediments and attached algae and water plants, as well as in places not protected from wind and wave activity. It was established that on both sides of the Sea of Okhotsk and of the Pacific Ocean foraminiferal complexes vary both in biodiversity and in density of their distribution in the littoral zone.

Lignin and chemical elements in the surface layer of bottom sediments from the Kandalaksha Bay of the White Sea

Chemical composition of the upper layer of sediments (0-1 cm) in the Kolvits and Knazhaya inlets, and also in the deep-water part of the Kandalaksha Bay is considered. It is shown that silts are richer in Fe, TOC, and heavy metals, than sands. The highest concentration of these elements is found in sediments under mixing zones of riverine and sea waters. Correlations of P, Zn, Cd, and Cu with iron are high, and correlations of Pb and Cu with organic carbon are also high. Very high concentration of Pb in the Kandalaksha Bay indicate technogenic pollution of sediments. Lignin makes significant contribution to formation of organic matter in the sediments. Composition of lignin in bottom sediments of the Kandalaksha Bay is defined by composition of lignin in soils and aerosols. Vanillin and syringyl structures prevail in molecular composition of lignin in bottom sediments. Their sources are coniferous vegetations, soils, and mosses. Ratios of certain types of phenol compounds indicate pollution of the upper layer of sediments by technogenic lignin. Lead and copper correlate well with this technogenic lignin.

Bottom sediment of the Western Baltic Sea - sheet Darß

The sheet "Darß" of the Western Baltic sediment distribution map displays several features of the late- and postglacial sediments in the area between 54°00? and 54°30? northern latitude and 12°00? and 13°00? eastern longitude on a scale of 1: 100,000. The main map shows the surface deposits in this area. Special attention is given to a detailed presentation of the granulometric characteristics of the sandy sedimens which are prevailing here. For this purpose a new way of visualization of grain size data was developed. Six insets provide information on water depth, positions of the sampling sites, areal distribution of median and sorting of sands, depth of the till surface thickness of the late- and postglacial sediments on top of the uppermost till and the bathymetry.

Grain counts and XRD mineralogy of turbidite sand and hemipelagic mud from ODP Leg 168 sites

Sequences of late Pliocene to Holocene sediment lap onto juvenile igneous crust within 20 km of the Juan de Fuca Ridge in northwestern Cascadia Basin, Pacific Ocean. The detrital modes of turbidite sands do not vary significantly within or among sites drilled during Leg 168 of the Ocean Drilling Program. Average values of total quartz, total feldspar, and unstable lithic fragments are Q = 35, F = 35, and L = 30. Average values of monocrystalline quartz, plagioclase, and K-feldspar are Qm = 46, P = 49, and K = 5, and the average detrital modes of polycrystalline quartz, volcanic-rock fragments, and sedimentary-rock plus metamorphic-rock fragments are Qp = 16, Lv = 43, and Lsm = 41. Likely source areas include the Olympic Peninsula and Vancouver Island; sediment transport was focused primarily through the Strait of Juan de Fuca, Juan de Fuca Channel, Vancouver Valley, and Nitinat Valley. Relative abundance of clay minerals (<2-µm-size fraction) fluctuate erratically with depth, stratigraphic age, and sediment type (mud vs. turbidite matrix). Mineral abundance in mud samples are 0%-35% smectite (mean = 8%), 18%-59% illite (mean = 40%), and 29%-78% chlorite + kaolinite (mean = 52%). We attribute the relatively low content of smectite to rapid mechanical weathering of polymictic source terrains, with little or no input of volcanic detritus from the Columbia River. The scatter in clay mineralogy probably was caused by converging of surface currents, turbidity currents, and near-bottom nepheloid clouds from several directions, as well as subtle changes in glacial vs. interglacial weathering products.

Foraminifers from DSDP Leg 87 holes

Leg 87 investigated two sites in the Nankai Trough, off southeastern Japan, and one in the Japan Trench, off northeastern Japan. Several holes at the Nankai Trough sites penetrated mostly Quaternary interbedded sandy turbidites and hemipelagic mud. Foraminifers are common only in certain turbidite sands because both sites are at or just below the carbonate compensation depth. The planktonic assemblages from these sandy layers consist of mixed cool-temperate and warm-water species, and include both solution-resistant and solution-prone species. The benthic assemblages from these same layers are composed of mixtures of shelf to abyssal species. The northward-flowing Kuroshio is important in producing the mixed planktonic faunas, whereas turbidity currents are the primary agents in mixing benthic faunas and in the rapid burial of both planktonic and benthic foraminifers, which protects them from solution. Interbedded hemipelagic muds are barren or contain sparse faunas. Hole 582B penetrated through the trench-fill deposits into hemipelagic sediments that originated in the Shikoku Basin. These muds contain a dissolution facies of solution-resistant planktonic species, partially dissolved tests, and deep bathyal benthic species. Drilling at Site 584, on the landward midslope of the Japan Trench, penetrated a section of dominantly diatomaceous mudstone. This section contains a meager Pliocene calcareous fauna in its upper third and a nearly monospecific assemblage of Martinottiella communis in the lower two-thirds. Diatom biostratigraphy indicates that this change in assemblages occurs near the Miocene/Pliocene boundary. Similar biofacies changes are observed in neighboring sections drilled during Legs 56 and 57. The change from agglutinated to calcareous faunas is probably related to a relative drop in the carbonate compensation depth at the end of the Miocene.

Grain shape of sediment from the Weddell Sea

Very fine quartz sand was examined from Paleogene and Neogene sediments of ODP Sites 693, 694, 695, 696, and 697 to determine their grain roundness using Fourier analysis and SEM surface texture characteristics. The objective of this study was to identify grain roundness and surface texture characteristics unique to East (Site 693) and West (Sites 695, 696, and 697) Antarctica and to glacial regimes. Once identified, these distinguishing features could then be used to determine changes in source area and glacial conditions in the central Weddell Sea Basin (Site 694). Three end members of very fine quartz sand are recognized in the Oligocene to Pleistocene sediments of the Weddell Sea: angular, rounded, and intermediate. End member 1 (angular) consists of extremely angular grains with numerous fracture textures. Previous investigations suggested that these sands are derived from crystalline rocks that fractured during formation or deformation and/or were exposed to weathering by ice. In this study, however, the correlation of angularity with ice activity is problematical as the most angular sands were recovered in the lower Oligocene sediments of the South Orkney Microcontinent, a period of temperate climatic conditions. End member 3 (rounded) consists of rounded grains with chemically and mechanically produced surface textures. These sands are presumed to be derived from the Beacon-type rocks in East Antarctica and the sedimentary deposits of the Northern Antarctic Peninsula. End member 2 (intermediate) grains display crystalline nodes and grain embayments. They are thought to be derived from felsic intrusives, East Antarctic quartzites, basement metamorphics of the South Orkney Microcontinent, and/or the Andean intrusive series of West Antarctica. Unfortunately, no features unique to either the East or West Antarctic sediment sources or to glacial conditions could be isolated. Therefore, the objective of determining provenance changes and sediment erosion and transport mechanisms could not be achieved using this approach.