(Table 2) Oxygen and carbon isotope composition of planktonic foraminiferal species from DSDP Holes 93-603B and 93-604, and one benthic species from Hole 93-604

Holes 603C and 604 of DSDP Leg 93 were drilled on the western Atlantic continental rise at water depths of 4633 m and 2364 m, respectively. In Hole 603C, a nearly continuous, undisturbed, and complete section of Pliocene and lower Pleistocene sediments was recovered by hydraulic piston coring; in Hole 604, a section of uppermost Miocene to Pleistocene sediments was incompletely recovered by rotary coring. In order to reconstruct the Pliocene and Pleistocene history of isotopic variations, 139 oxygen and carbon isotope values were determined for planktonic and monospecific benthic foraminifer samples from these holes. Large parts of the Pleistocene history could not, however, be documented because sample intervals were large and sediments at Site 604 were redeposited. Time correlation is based on magnetostratigraphic (Hole 603C) and micropaleontologic (Hole 603C, Site 604) interpretation. Stable isotope analyses were carried out on the planktonic foraminiferal species Globigerinoides ruber, G. obliquus, and Globorotalia inflata from Hole 603C (48 analyses) and from Site 604 (48 analyses); at Site 604, the benthic foraminifer Uvigerina peregrina (43 analyses) was also studied through the section. Age calibration for Hole 603C is based on the magnetostratigraphy of Canninga et al. (1987; doi:10.2973/dsdp.proc.93.130.1987), which uses the time scale of Lowrie and Alvarez (1981).

(Table 1) Clay minerals at DSDP Hole 93-603B

Cretaceous sediments encountered in Hole 603B contain a 17 Å smectite as the principal clay mineral, with lesser amounts of illite, kaolinite, and randomly interstratified illite/smectite (I/S). No evidence of smectite to I/S transformation with depth is seen in the interval between 1040 and 1570 m below the sediment surface. Although the presence of some volcanic ash suggests a volcanic origin for the smectite, the nature of associated organic matter together with prevailing sedimentological models for Cretaceous sedimentation on the lower continental rise argue more strongly for a dominantly terrestrial origin for the clays.

Eocene benthic foraminifera of DSDP Hole 93-605

This paper describes and illustrates early to middle Eocene benthic foraminifers from northwest Atlantic Site 605, on the continental rise off New Jersey. Benthic foraminiferal faunas are dominated by Bulitnina spp., Nuttallides truempyi, Lenticulina spp., and Cibicidoides spp. Other common taxa include Oridorsalis spp., Gyroidinoides spp., uniserial taxa, arenaceous taxa, and Globocassidulina subglobosa. Together, these taxa usually make up 70% or more of the total fauna. The assemblages are interpreted as indicating a lower bathyal environment of deposition during the Eocene at Site 605. This is corroborated by an independent water depth estimate through backstripping, indicating a water depth for the beginning of the Eocene to late middle Eocene of approximately 2300 to 2000 m.

(Table 1) Distribution of Lower Cretaceous calcareous nannofossils at DSDP Hole 93-603B

Upper Berriasian to lower Aptian calcareous nannofossil assemblages have been studied from a siliciclastic deep-sea fan complex and a subjacent limestone sequence drilled beneath the lower continental rise in the western North American Basin, 270 miles (435 km) off Cape Hatteras, North Carolina (USA). Sharp lithologic facies changes and reworking by turbidites complicate the biostratigraphic interpretation, but provide an excellent opportunity to better distinguish "nearshore" from open-ocean nannofossil species, and to investigate the introduction of neritic taxa into the deep-see environment, a phenomenon that appears to have been widespread within the circum-North Atlantic during Neocomian times. Well-preserved assemblages in dark, carbonaceous claystones were probably displaced from the oxygen minimum zone along the upper slope or outer shelf. Neritic, continental margin species prevalent in this facies include the holococcolith Zebrashapka vanhintei n. gen., n. sp., Lithraphidites alatus magnus n. spp., Pickelhaube furtiva n. gen., and a host of nannoconids and micrantholiths. A qualitative evaluation of widely used guide fossils suggests that the triad of proposed markers for the base of Roth's Zone NC3 make their first appearances in the following (ascending) order: Diadorhombus rectus, TUbodiscus verenae, Calcicalathina oblongata. Of these, we chose the nominative species for the zone, T. verenae, to mark its base and to approximate the Berriasian/Valangian boundary. Cyclagelosphaera deflandrei is strongly affected by diagenesis and is therefore not a reliable index species for the base of Zone NC4 near the Valanginian/Hauterivian boundary (the last occurrence of T. verenae is also not suitable there). In addition, Lithraphidites bollii, a form apparently confined to the low latitudes of the Tethyan region, was absent at the more temperate Site 603 and not available as a subzonal marker for the upper Hautervian-lower Barremian (mid-NC4 and mid-NC5, respectively). Cruciellipsis cuvillieri, however, provides a reliable datum just below the Hauterivian/Barremian boundary (base of NC5), despite the potential for reworking in this section. Nannoconids tend to be reworked in this section, and do not provide trustworthy forms to mark the Barremian/Aptian boundary (base of NC6). Hayesites irregularis n. comb, probably does provide a useful first appearance datum within the lower Aptian, if it is not confused with a more birefringent and globular form, Rucinolithus terebrodentarius n. sp. Rhagodiscus angustus is mimicked by a similar form (Zeughrabdotusl pseudoangustus n. sp.), which apparently ranges down to the Hauterivian, thus Lithastrinus floralis provides a more useful first appearance datum for the base of the middle-upper Aptian Rhagodiscus angustus Zone (NC7). Aside from the new taxa mentioned above, the following are also described: Cretarhabdusl delicatus n. sp. and Cyclagelosphaera jiangii n. sp.

Calcium carbonate, organic carbon, sediment description and hydrogen and oxygen index at DSDP Sites 93-603, 93-605, 93-604 and 95-603

The organic matter contents of sediments and rocks sampled during DSDP Leg 93 have been characterized by CHN and Rock-Eval analyses. Most samples from Sites 604 and 605 on the New Jersey continental slope and from Site 603 on the Hatteras outer continental rise contained less than 0.5% organic carbon. Some Neogene samples from the slope contained 1 to 2% organic carbon, and Cretaceous samples from the outer rise were as rich as 13.6% organic carbon by weight. Thin layers of black claystones of Santonian, Cenomanian, and Albian age were found interbedded in organiccarbon- lean, bioturbated, turbiditic claystones. Similar layers of turbiditic black marlstones were interspersed among Neocomian limestones and sandstones. Although the organic matter in many of the samples appeared to be detrital continental material, according to Rock-Eval and C/N values, Cenomanian black shales, in particular, contained substantial proportions of marine-derived organic matter.

(Figure 2) Distribution of planktonic foraminifera in the upper Paleocene of DSDP Hole 93-605

Good faunal preservation in the upper part of the Planorotatites pseudomenardii Zone at Deep Sea Drilling Project Site 605, northwestern Atlantic, allows a biometric analysis of the upper Paleocene planktonic foraminiferal species Planorotatites pseudomenardii (Belli), a keeled species that probably developed from a middle Paleocene unkeeled Planorotalites form. Multivariate analysis shows a consistent separation of all Planorotatites specimens into two groups, which are differentiated by the presence or absence of a complete keel; other variables are only of minor importance. The keeled group coincides with P. pseudomenardii. We recognize only one unkeeled species, Planorotalites chapmani (Parr), with Planorotalites ehrenbergi (Bolli), Planorotalites imitata (Subbotina), Planorotalites planoconica (Subbotina), Planorotalites troelseni (Loeblich and Tappan), and Planorotalites hausbergensis (Gohrbrandt) as junior synonyms. P. chapmani ranges from the middle Paleocene to at least the top of the upper Paleocene. The morphology of P. pseudomenardii does not change significantly, and although the frequency of Planorotalites is variable, the proportion of P. pseudomenardii to all Planorotalites varies only slightly around 65% in the upper two-thirds of its range at Site 605. However, in the top 1.5 m of its range the proportion of P. pseudomenardii decreases; in the same section, all Planorotalites specimens show a reduction in the size of their tests, suggesting that a temporary change in environmental conditions led to the exit of P. pseudomenardii\ in Magnetozone C24R at Site 605-apparently higher than expected from current standard zonations. Unkeeled Planorotalites, in contrast to R. pseudomenardii, persisted and regained normal size. The entry of P. pseudomenardii at Site 605 cannot be described in the same detail because of low frequencies of Planorotalites specimens and an erratic distribution of P. pseudomenardii in the lower part of its range. Many of the washed residues of the samples from these sediments are dominated by radiolarians, and the poorly preserved foraminiferal faunas may have abundant benthics, indicating carbonate dissolution. The initially low frequencies of P pseudomenardii relative to the unkeeled Planorotalites show a strong negative correlation with the total amount of radiolarians per sample and could be the result of preferential preservation, as well as of the same environmental conditions that caused the abundance of radiolarians.

(Table 1) Pollen assemblage at DSDP Holes 96-603B and 93-605

The analysis of 104 core-catcher samples from Site 603 resulted in a continuous palynological record from the middle Miocene to early Pleistocene. Two palynological zones could be established (Zone 2, below 380 m: high Pinus, Quercus, and Carya values; Zone 1, above 380 m: high Pinus, and Sphagnum values). The marine pollen record was found to reflect the history of the vegetation of the eastern United States, the flora from Zone 2 indicating a warmer climate than that from Zone 1, which depicts a climatic cooling trend. The onset of Western Boundary Undercurrent deposition had no noticeable effect on the pollen distribution in the marine sediments.

(Table 1) Magnetozone boundaries, age and sedimentation rate at DSDP Hole 93-605

Natural Remanent Magnetization (NRM) was measured for regularly spaced samples from the 620-m-thick, lower middle Eocene to upper Maestrichtian section of DSDP Site 605. The total NRM of the Eocene chalks was too low (5-50 µA/m) to establish a reliable magnetic polarity stratigraphy. However, the results from the somewhat more clayrich Paleocene-upper Maestrichtian section are useful. A fourfold quality classification of the results of progressive demagnetization studies aided in determining the polarity of the original remanence. Two types (1 and 2a) showed a Characteristic Remanent Magnetization (ChRM) direction with reversed and normal polarity, respectively; the third type (2b) can be interpreted as having a reversed ChRM, which could not be cleaned, whereas the fourth type (3) is considered to be unreliable. The Site 605 magnetic polarity stratigraphy compares well with published sections, adding important detail to the correlation with planktonic microfossil zones and, hence, to the resolution of this portion of the time scale (C24-C32 on the Berggren et al., 1985, scale). The Cretaceous/Tertiary boundary occurs in a reversed polarity zone that has been correlated with Subchron C29r. We suspect the presence of an unconformity at the boundary between lithostratigraphic Units Va and IV a location which is also the level of Reflection Horizon A*.

(Table 1) Organic carbon, hydrogen and oxygen index and hydrocarbons at DSDP Hole 93-603B

C2-C8 hydrocarbon concentrations (about 35 compounds identified, including saturated, aromatic, and olefinic compounds) from 27 shipboard-sealed, deep-frozen core samples of DSDP Hole 603B off the east coast of North America were determined by a gas-stripping/thermovaporization method. Total yields representing the hydrocarbons dissolved in the pore water and adsorbed on the mineral surfaces of the sediments vary from 22 to 2400 ng/g of dryweight sediment. Highest yields are measured in the two black shale samples of Core 603B-34 (hydrogen index of 360 and 320 mg/g Corg, respectively). In organic-carbon-normalized units these samples have hydrocarbon contents of 12,700 and 21,500 ng/g Corg, respectively, indicating the immaturity of their kerogens. Unusually high organic-carbonnormalized yields are associated with samples that are extremely lean in organic carbon. It is most likely that they are enriched by small amounts of migrated light hydrocarbons. This applies even to those samples with high organic-carbon contents (1.3-2.2%) of Sections 603B-28-4, 603B-29-1, 603B-49-2, and 603B-49-3, because they have an extremely low hydrocarbon potential (hydrogen index between 40 and 60 mg/g Corg). Nearly all samples were found to be contaminated by varying amounts of acetone that is used routinely in large quantities on board ship during core-cutting procedures. Therefore, 48 samples from the original set of 75 collected had to be excluded from the present study.

(Table 2) Terrigenous, authigenic and biogenic composition of sediments at DSDP Hole 93-603B

Pelagic sedimentation during the Early Cretaceous at Site 603 produced alternations of laminated marly limestone and bioturbated limestone-a facies typical of the "Blake-Bahama Formation" of the western Atlantic. This limestone is a nannofossil micrite, rich in calcified radiolarians, with variable amounts of organic matter, pyritized radiolarian tests, fish debris, and micaceous silt. The laminated marly limestone layers are enriched in organic matter when compared with the intervals of bioturbated limestone. The organic carbon is predominantly terrestrial plant debris; where the organic-carbon content is in excess of 1%, there is also a significant marine-derived component. Laminations can result either from bands of alternately enriched and depleted opaque material and clay, or from bands of elongate lenses (microflasers) of micrite, which could be plastically deformed pellets or diagenetic features. The alternating intervals of laminated and bioturbated structures may have resulted from combined changes in surface productivity, in the influx of terrigenous organic matter, and in the intensity of bottom circulation, which led to episodic oxygen depletion in the bottom water and sediments. Variations in the relative proportions of laminated clay-rich and bioturbated lime-rich limestone and in the development of cycles between these structures make it possible to subdivide the Lower Cretaceous pelagic facies into several subunits which appear to be regional in extent. Bioturbated limestone is dominant in the Berriasian, laminated marly limestone in the Valanginian and Barremian-lower Aptian, and well-developed alternations between these end members in the Hauterivian. The Hauterivian to lower Aptian sediments contain abundant terrigenous clastic turbidites associated with a submarine fan complex. These changes in the general characteristics of the pelagic sediment component of the Blake-Bahama Formation at Site 603 are synchronous with those in the Blake-Bahama Basin (Sites 534 and 391) to the south. Carbonate sedimentation ended in the early Aptian, probably because of a regional shoaling of the carbonate compensation depth.