Results from Purgatory Conglomerate investigations

Quartz Crystallographic Preferred Orientation (CPO) patterns are most commonly a result of deformation by dislocation creep. We investigated whether Dissolution-Precipitation Creep (DPC) a process that occur at lower differential stresses and temperatures, may result in CPO in quartz. Within the Purgatory Conglomerate, DPC led to quartz dissolution along cobble surfaces perpendicular to the shortening direction, and quartz precipitation in overgrowths at the ends of the cobbles (strain shadows), parallel to the maximum extension direction. The Purgatory Conglomerate is part of the SE Narragansett basin where strain intensity increases from west to east and is associated with top-to-the-west transport and folding during the Alleghanian orogeny. Quartz c-axis orientations as revealed by Electron Backscatter Diffraction (EBSD) methods, were random in all analyzed domains within the cobbles and strain shadows irrespective of the intensity of strain or metamorphic grade of the sample. Quartz dissolution probably occurred exclusively along the cobbles' margins, leaving the remaining grains unaffected by DPC. The fact that quartz precipitated in random orientations may indicate that the strain shadows were regions of little or no differential stress.

Sedimentverteilung im Seegebiet bei Bokniseck, Eckernförder Bucht, westliche Ostsee (sediment distribution at Bokniseck, western Baltic Sea; map)

A detailed topographic survey was carried out in the "Hausgarten"-area of the Joint Research Programm 95 of the University of Kiel by the Deutsches Hydrographisches Institut. Based on this information a sediment distribution map was constructed. A horizontal section extending from 0 to 27 m of water depth was investigated showing the distribution of pebbles and boulders, of algal growth, and exposed areas of glacial marl; the grain size distribution was determined for the various sediment types.

The Gepatschferner from 1850 - 2006, with links to digital elevation models and glacier margins

This theses investigates changes at Gepatschferner in length, area and volume since the last glacier maximum in 1850. Changes are discussed for the following time periods: 1850-1922, 1922-1971, 1971-1997, 1997-2006. Digital elevation models were created for 1850 from geomorphological data and for 1922 and 1971 from historical maps. Existing DEMs for 1997 and 2006 were further analysed. Since 1850 Gepatschferner has retreated by 2 km in length and has lost 32% of its area and 36% of its volume. The rate of loss of volume is increasing faster than the rate of loss of area and losses in the upper regions of the glacier are becoming increasingly more important to overall losses. The largest losses per 50 m elevation increment occur at the tongue. These losses are greatest in the most recent time step studied, 1997-2006, and exceed previous values by 40% and more. The data base includes the glacier margins, elevations models as they have been compiled within the thesis (DEMs of 1997 and 2006 are part of the glacier inventories, length changes are part of the length change data base of the Austrian Alpine Club).

Gravity mapping in the southern Weddell Sea region, Antarctica (Scale 1:2 000 000)

New maps of free-air and the Bouguer gravity anomalies on the Weddell Sea sector (70-81° S, 6-75° W) of Antarctica are presented. These maps are based on the first computer compilation of available gravity data collected by ''Sevmorgeologia'' in 1976-89 in the southern Weddell Sea and adjacent coasts of western Dronning Maud Land (WDML) and Coats Land. The accomplished gravity studies comprise airborne observations with a line spacing of about 20 km and conventional measurements at over-the-ice points, which were spaced at 10-30 km and supplemented by seismic soundings. Hence, anomalies on the maps represent mainly large-scale and deep crustal features. The dominant feature in free-air gravity map is a large dipolar gravity anomaly stretching along the continental margin. Following the major grain of seabed morphology this shelf-edge/slope anomaly (SESA) is clearly divided into three segments characterized by diverse anomaly amplitudes, wavelengths and trends. They are associated with continental margins of different geotectonic provinces of Antarctica surrounding the Weddell Sea. Apparent distinctions in the SESA signatures are interpreted as the gravity expression of tectonic, deep crustal structure segmentation of the continental margin. The prominent gravity highs (100-140 mGal) of the shelf edge anomaly mapped along WDML are assumed to represent high-density mantle injections intruded into the middle/lower crust during initial rifting of continental breakup. Enlarged wavelengths and diminished amplitudes of the gravity anomaly westwards, along the Weddell Sea embayment (WSE) margin, reflect a widening of the continental slope and a significant increase in thickness of underlying sediment strata. Low amplitude, negative free-air anomalies in the Filchner-Ronne Ice Shelves (FRIS) contrast sharply with the dominating positive anomalies offshore. This indicates a greater sedimentary thickness of the basin in this area. Crustal response to the enlarged sediment load is impressed in mostly positive features of the Bouguer gravity field observed here. Two pronounced positive Bouguer anomalies of 50-70 mGal and an average widths of 200 km dominate the Weddell Sea embayment margins towards the Antarctic Peninsula and the East Antarctic craton. They correlate well with very deep seabed troughs (> 1000 m below sea level). The gravity highs are most likely caused by a shallow upper mantle underneath graben-rift structures evolved at the margins of the WSE basin. A regional zone (> 100 km in width) of the prominent Bouguer and free-air negative anomalies (-40 to -60 mGal) adjacent Coats Land to the north of the ice shelf edge may indicate the presence of the thick old cratonic crust far offshore beneath the Weddell Sea Embayment.

Radio-echo sounding investigation of the western Dronning Maud Land and north-eastern Coats Land, East Antarctica (Scale 1:2 500 000)

During two Antarctic field seasons, western Dronning Maud Land and eastern Coats Land were covered by airborne radio-echo sounding surveys, conducted in combination with magnetic and gravity measurements along the 50 NW-SE-directed tracks, totaling about 11200 km and spaced 20 km apart. The data were collected in analogue form and then processed to compile ice surface, ice thickness and bedrock topography maps in I : 2 500 000 scale which gave a new and/or more detailed information on the region than previous compilations. The maps show that western Dronning Maud Land is dominated by a large mountainous area with altitudes up to 2800 m including rock outcrops of Annandagstoppane, Borgmassivet, Kirwanveggen and Heimefrontfjella. Upland terrains of Vestfjella and Mannefallknausane have an isolated position and are surrounded by a plain with bedrock depressions of 600 m deep below sea level. A narrow strip of north-eastern Coats Land studied by radio-echo soundings exhibits a smooth subice relief with altitudes close to sea level. The structural style of bedrock topography was mostly determined by extensional tectonics.

Survey of Western Palestine 1880, Palestine Exploration Fund 1:63,360 mosaicked map

The Palestine Exploration Fund (PEF) Survey of Western Palestine (1871-1877) is highly praised for its accuracy and completeness; the first systematic analysis of its planimetric accuracy was published by Levin (2006). To study the potential of these 1:63,360 maps for a quantitative analysis of land cover changes over a period of time, Levin has compared them to 20th century topographic maps. The map registration error of the PEF maps was 74.4 m using 123 control points of trigonometrical stations and a 1st order polynomial. The median RMSE of all control and test points (n = 1104) was 153.6 m. Following the georeferencing of each of the 26 sheets of the PEF maps of the Survey of Western Palestine, a mosaicked file has been created. Care should be taken when analysing historical maps, as it cannot be assumed that their accuracy is consistent at different parts or for different features depicted on them.

Daily MODIS composites of thin-ice thickness and ice-surface temperatures for the Southern Weddell Sea

Based upon high-resolution thermal-infrared Moderate-Resolution Imaging Spectroradiometer (MODIS) satellite imagery in combination with ERA-Interim atmospheric reanalysis data, we derived long-term polynya parameters such as polynya area, thin-ice thickness distribution and ice-production rates from daily cloud-cover corrected thin-ice thickness composites. Our study is based on a thirteen year investigation period (2002-2014) for the austral winter (1 April to 30 September) in the Antarctic Southern Weddell Sea. The focus lies on coastal polynyas which are important hot spots for new-ice formation, bottom-water formation and heat/moisture release into the atmosphere. MODIS has the capability to resolve even very narrow coastal polynyas. Its major disadvantage is the sensor limitation due to cloud cover. We make use of a newly developed and adapted spatial feature reconstruction scheme to account for cloud-covered areas. We find the sea-ice areas in front of Ronne and Brunt Ice Shelf to be the most active with an annual average polynya area of 3018 ± 1298 and 3516 ± 1420 km2 as well as an accumulated volume ice production of 31 ± 13 and 31 ± 12 km**3, respectively. For the remaining four regions, estimates amount to 421 ± 294 km**2 and 4 ± 3 km**3 (Antarctic Peninsula), 1148 ± 432 km**2 and 12 ± 5 km**3 (Iceberg A23A), 901 ± 703 km**2 and 10 ± 8 km**3 (Filchner Ice Shelf) as well as 499 ± 277 km**2 and 5 ± 2 km**3 (Coats Land). Our findings are discussed in comparison to recent studies based on coupled sea-ice/ocean models and passive-microwave satellite imagery, each investigating different parts of the Southern Weddell Sea.

A virtual species set for robust and reproducible Species Distribution Modelling tests

Predicting species potential and future distribution has become a relevant tool in biodiversity monitoring and conservation. In this data article we present the suitability map of a virtual species generated based on two bioclimatic variables, and a dataset containing more than 700.000 random observations at the extent of Europe. The dataset includes spatial attributes such as, distance to roads, protected areas, country codes, and the habitat suitability of two spatially clustered species (grassland and forest species) and a wide spread species.

Global LAI uncertainty and relative uncertainty datasets derived from a Triple Collocation Error Model (TCEM)

Uncertainty information for global leaf area index (LAI) products is important for global modeling studies but usually difficult to systematically obtain at a global scale. Here, we present a new method that cross-validates existing global LAI products and produces consistent uncertainty information. The method is based on a triple collocation error model (TCEM) that assumes errors among LAI products are not correlated. Global monthly absolute and relative uncertainties, in 0.05° spatial resolutions, were generated for MODIS, CYCLOPES, and GLOBCARBON LAI products, with reasonable agreement in terms of spatial patterns and biome types. CYCLOPES shows the lowest absolute and relative uncertainties, followed by GLOBCARBON and MODIS. Grasses, crops, shrubs, and savannas usually have lower uncertainties than forests in association with the relatively larger forest LAI. With their densely vegetated canopies, tropical regions exhibit the highest absolute uncertainties but the lowest relative uncertainties, the latter of which tend to increase with higher latitudes. The estimated uncertainties of CYCLOPES generally meet the quality requirements (± 0.5) proposed by the Global Climate Observing System (GCOS), whereas for MODIS and GLOBCARBON only non-forest biome types have met the requirement. Nevertheless, none of the products seems to be within a relative uncertainty requirements of 20%. Further independent validation and comparative studies are expected to provide a fair assessment of uncertainties derived from TCEM. Overall, the proposed TCEM is straightforward and could be automated for the systematic processing of real time remote sensing observations to provide theoretical uncertainty information for a wider range of land products.

A numerical discrete element study on the influence of an embedded viscoelastic-plastic layer at different viscosity values

The major aim of this study was to examine the influence of an embedded viscoelastic-plastic layer at different viscosity values on accretionary wedges at subduction zones. To quantify the effects of the layer viscosity, we analysed the wedge geometry, accretion mode, thrust systems and mass transport pattern. Therefore, we developed a numerical 2D 'sandbox' model utilising the Discrete Element Method. Starting with a simple pure Mohr Coulomb sequence, we added an embedded viscoelastic-plastic layer within the brittle, undeformed 'sediment' package. This layer followed Burger's rheology, which simulates the creep behaviour of natural rocks, such as evaporites. This layer got thrusted and folded during the subduction process. The testing of different bulk viscosity values, from 1 × 10**13 to 1 × 10**14 (Pa s), revealed a certain range where an active detachment evolved within the viscoelastic-plastic layer that decoupled the over- and the underlying brittle strata. This mid-level detachment caused the evolution of a frontally accreted wedge above it and a long underthrusted and subsequently basally accreted sequence beneath it. Both sequences were characterised by specific mass transport patterns depending on the used viscosity value. With decreasing bulk viscosities, thrust systems above this weak mid-level detachment became increasingly symmetrical and the particle uplift was reduced, as would be expected for a salt controlled forearc in nature. Simultaneously, antiformal stacking was favoured over hinterland dipping in the lower brittle layer and overturning of the uplifted material increased. Hence, we validated that the viscosity of an embedded detachment strongly influences the whole wedge mechanics, both the respective lower slope and the upper slope duplex, shown by e.g. the mass transport pattern.

Der Pegel steigt - Studentisches Medienprojekt zur Internationalen REKLIM Konferenz in Kooperation mit der DEKRA-Hochschule Berlin, Links zum Viralfilm in unterschiedlichen Auflösungen

Der Pegel steigt: Zeit, die Angel auszuwerfen - oder etwas zu unternehmen! Trockener Humor gegen den Meerespiegelanstieg: mehr als 45 % der globalen Weltbevölkerung leben in Küstengebieten. Durch den Klimawandel wird der Meeresspiegel steigen, mit ungewissen Konsequenzen für die Küstenbevölkerung.