(Table 1) Geochemistry of Nauru Basin basalts from the lower portion of DSDP Hole 61-462A

Atomic-absorption spectrophotometry and instrumental neutron activation analysis were used to determine concentrations of SiO2, Al2O3, FeOt, MgO, CaO, Na2O, K2O, MnO, La, Ce, Sm, Eu, Tb, Yb, Lu, Sc, Co, Cr, Th, Hf, and Ta for 14 basalt samples from the lower portion of Hole 462A in the Nauru Basin. The basalts are similar to normal midocean ridge basalt (MORB) for the elements analyzed, and light rare-earth elements (LREE) are depleted relative to heavy rare-earth elements (HREE). Two samples are extensively altered to smectites and show significant reductions in Al2O3, CaO, MnO, Na2O, REE, Sc, Co, and Hf and gains in MgO and FeOt relative to unaltered samples. The increase in MgO and decrease in CaO indicate that alteration was caused by hydrothermal solutions.

Organic geochemistry of Upper Albian sediments from the Kirchrode I borehole

In the framework of a multidisciplinary research program, an organic geochemical study was carried out on a drill core which comprises a 245 m thick sequence of light-colored, Upper Albian marlstones that were deposited in the central part of the Lower Saxony basin (northern Germany). For part of the Upper Albian sequence, high-resolution measurements of carbonate contents reveal cycles which can be related to earth orbital forcing. Based on these data, sediment accumulation rates were calculated to be in the order of 15 g/m**2/yr. These high accumulation rates contrast with very low organic carbon contents and an extremely poor preservation of the autochthonous organic matter. Most of the sedimentary organic matter is of terrigenous origin and mainly derived from the erosion of older sedimentary rocks. Organic petrography reveals only a very small fraction of marine organic particles. Carbon/sulphur ratios, pristane/phytane ratios as well as the predominance of resedimented organic particles over autochthonous organic particles suggest that aerobic degradation processes rather than anaerobic processes (sulphate reduction) were responsible for the degradation of the organic matter. Furthermore, the scarcity of terrigenous organic particles (vitrinite) indicates that there was little vegetation on nearby land areas. To explain these analytical results, a depositional model was developed which could explain the scarcity of organic matter in the Upper Albian sediments. This model is based on downwelling of oxygen-rich, saline waters of Tethyan origin, which reduces the nutrient content of surface waters and thus primary bioproductivity while degradation of primary organic matter in the water column is enhanced at the same time. These conditions contrast to those which existed in Barremian and early Aptian times in this basin, when limited water exchange with adjacent oceans caused oxygen deficiency and the deposition of numerous organic carbon-rich black shales. The thick, organic matter-poor Upper Albian sequence of northern Germany also contrasts with comparatively thin, time-equivalent, deep-sea black shales from Italy. This discrepancy indicates that local and regional oceanographic factors (at least in this case) have a greater influence on organic matter deposition than global events.

Geochemistry of middle Eocene-lower Oligocene pelagic sediments of ODP Hole 105-647A

Geochemical analyses of the middle Eocene through lower Oligocene lithologic Unit IIIC (260-518 meters below seafloor [mbsf]) indicate a relatively constant geochemical composition of the detrital fraction throughout this depositional interval at Ocean Drilling Program (ODP) Site 647 in the southern Labrador Sea. The main variability occurs in redox-sensitive elements (e.g., iron, manganese, and phosphorus), which may be related to early diagenetic mobility in anaerobic pore waters during bacterial decomposition of organic matter. Initial preservation of organic matter was mediated by high sedimentation rates (36 m/m.y.). High iron (Fe) and manganese (Mn) contents are associated with carbonate concretions of siderite, manganosiderite, and rhodochrosite. These concretions probably formed in response to elevated pore-water alkalinity and total dissolved carbon dioxide (CO2) concentrations resulting from bacterial sulfate reduction, as indicated by nodule stable-isotope compositions and pore-water geochemistry. These nodules differ from those found in upper Cenozoic hemipelagic sequences in that they are not associated with methanogenesis. Phosphate minerals (carbonate-fluorapatite) precipitated in some intervals, probably as the result of desorption of phosphorus from iron and manganese during reduction. The bulk chemical composition of the sediments differs little from that of North Atlantic Quaternary abyssal red clays, but may contain a minor hydrothermal component. The silicon/ aluminum (Si/Al) ratio, however, is high and variable and probably reflects original variations in biogenic opal, much of which is now altered to smectite and/or opal CT. An increase in the sodium/potassium (Na/K) ratio in the upper Eocene corresponds to the beginning of coarsergrained feldspar flux to the site, possibly marking the onset of more vigorous deep currents. Although the Site 647 cores provide a nearly complete high-resolution, high-latitude Eocene-Oligocene record, the high sedimentation rate and somewhat unusual diagenetic conditions have led to variable alteration of benthic foraminifers and fine-fraction carbonate and have overprinted the original stable-isotope records. Planktonic foraminifers are less altered, but on the whole, there is little chance of sorting out the nature and timing of environmental change on the basis of our stable-isotope analyses.

Thorium and uranium isotopes in upper Pleistocene sediments of the Baffin Bay

Concentrations and activity ratios of uranium and thorium isotopes (234U/238U, 230Th/232Th) were determined at about 5-m intervals through the composite top 22-m sequence of Ocean Drilling Program (ODP) Hole 645 in Baffin Bay and, in the Labrador Sea, at 1-m intervals through the top 11 m of Core 84-030-003 (TWC and P) collected by the Hudson during a preliminary survey of Site 647, and also at about 2-m intervals through the composite top 22-m sequence of Hole 646. In the Labrador Sea, surficial sediments show unsupported 230Th having a 230Th/234U activity ratio of about 3. At Site 647, a regular decrease in the 230Th/232Th activity ratio was observed downcore from about 1.2 (at 1 mbsf) to about 0.4 (at ~8 mbsf), through a sequence spanning over 18O stages 2 through 8. The correlative thorium/uranium chronology and 18O stratigraphy indicate relatively constant sedimentation rates throughout the sequence. At Site 646, down Greenland slope, and at Site 645, in Baffin Bay, highly variable uranium and thorium concentrations and isotopic ratios were observed in relation to highly variable sedimentation rates. As a whole, the lower-excess observed in Baffin Bay records is indicative of very high absolute sedimentation rates in comparison with those of the Labrador Sea. These rates are confirmed by the 18O-stratigraphy and a few AMS 14C controls on handpicked foraminifers. At both Labrador Sea sites, a clear indication of an initial 230Th-excess (over the 230Th-rain from the water column) was found.

Temperature and d18O measurements from different ODP Sites at the shelf and upper slope of the Peru Margin

The first experimentally determined temperature dependent oxygen-18 fractionation factor between dolomite and water at low temperatures [Vasconcelos et al. 1995 doi:10.1130/G20992.1] allows now the precise calculation of temperatures during early diagenetic dolomite precipitation. We use d18O values of early diagenetic dolomite beds sampled during ODP Legs 112 and 201 on the Peru continental margin (Sites 1227, 1228 and 1229) [Meister et al. 2007, doi:10.1111/j.1365-3091.2007.00870.x] to calculate paleo-porewater temperatures at the time of dolomite precipitation. We assumed unaltered seawater d18O values in the porewater, which is supported by d18O values of the modern porewater presented in this study. The dolomite layers in the Pleistocene part of the sedimentary columns showed oxygen isotope temperatures up to 5 °C lower than today. Since Sites 1228 and 1229 are located at 150 and 250 m below sealevel, respectively, their paleo-porewater temperatures would be influenced by considerably colder surface water during glacial sealevel lowstands. Thus, Pleistocene dolomite layers in the Peru Continental margin probably formed during glacial times. This finding is consistent with a model for dolomite precipitation in the Peru Margin recently discussed by Meister et al. [Meister et al. 2007, doi:10.1111/j.1365-3091.2007.00870.x], where dolomite forms episodically at the sulphate methane interface. It was shown that the sulphate methane interface migrates upwards and downwards within the sedimentary column, but dolomite layers may only form when the sulphate-methane interface stays at a fixed depth for a sufficient amount of time. We hypothesize that the sulphate-methane interface persists within TOC-rich interglacial sediments, while this zone is buried by TOC-poor sedimentation during glacial times. Thus, the presented oxygen isotope data provide additional information on the timing of early diagenetic dolomite formation and a possible link between episodicity in dolomite formation and sealevel variations. A similar link between early diagenesis and oceanography may also explain spacing of dolomite layers in a Milankovitch type pattern observed in the geological record, such as in the Miocene Monterey Formation.

Bolboforma of Eocene and lower Oligocene sediments of Maud Rise, Weddell Sea

Five species of Bolboforma have been found in middle Eocene to lower Oligocene sediments from Maud Rise, Weddel Sea, Antarctica (Leg 113, Holes 689B and 690B), the first reported Bolboforma from the Antarctic Paleogene. The previous oldest known occurrences of Bolboforma in the world's oceans were of late Eocene age and this study extends the known range to the middle middle Eocene (~ 44 Ma). Highest species diversity of Bolboforma in the Weddell Sea region of Antarctica occurred during the late Eocene, after which all but one important species disappeared before the Eocene/Oligocene boundary (36.5 Ma). The remaining species, B. irregularis, disappeared soon after, during the earliest Oligocene. The disappearance of Bolboforma in this region of Antarctica coincided with significant climatic cooling that occurred at the end of the Eocene and during the earliest Oligocene, when subpolar replaced temperate conditions. Bolboforma is not known from younger sediments in the Antarctic except for a brief interval during the late early Miocene, an interval of Neogene climatic warmth. The presence of Bolboforma in Eocene to lower Oligocene sequences in the Weddell Sea region of Antarctica is therefore consistent with this taxon's previously recognized association with temperate water masses. Bolboforma is of limited biostratigraphic value at present, because of relatively long stratigraphic ranges and diachronous extinctions. Previous suggestions that Bolboforma represents an encystment stage of phytoplankton require further critical study because the deposition, in large numbers, at paleodepths up to 2250 m in the open ocean, is an unlikely strategy for an encystment phase of a phytoplanktonic organism. A new species, Bolboforma antarctica, is described, exhibiting a stratigraphic range from middle middle Eocene to the upper Eocene (~ 44 to 39 Ma).

Upper Maestrichtian to Eocene benthic foraminifera in ODP Leg 121 holes

Late Maestrichtian to late Eocene bathyal benthic foraminiferal faunas at Sites 752,753, and 754 on Broken Ridge in the eastern Indian Ocean were analyzed as to their stratigraphic distribution of species to clarify the relation between faunal turnovers and paleoceanographic changes. Based on Q-mode factor analysis, eight varimax assemblages were distinguished: the Stensioina beccariiformis assemblage in the upper Maestrichtian to upper Paleocene; the Cibicidoides hyphalus assemblage in the upper Maestrichtian; the Cibicidoides cf. pseudoperlucidus assemblage in the upper Paleocene; the Anomalinoides capitatusldanicus assemblage in the uppermost Paleocene to lower Eocene; the Cibicidoides subspiratus assemblage in the lower Eocene; the Nuttallides truempyi assemblage in the lower and middle Eocene; the Osangularia sp. 1 - Hanzawaia ammophila assemblage in the upper Eocene; and the Lenticulina spp. assemblage in the uppermost Eocene, Oligocene, and lower Miocene. The presence of the Osangularia sp. 1 - Hanzawaia ammophila assemblage is related to the shallowing episode on Broken Ridge (upper bathyal), as a result of the rifting event that occurred in the middle Eocene. The most distinct faunal change (the disappearance of about 37% of the species) occurred between the S. beccariiformis assemblage and the A. capitatusldanicus assemblage, at the end of the upper Paleocene. A. capitatusldanicus, Lenticulina spp., and varied forms of Cibicidoides replaced the Velasco-type fauna at this time. The timing of this event is well correlated with the known age at South Atlantic sites (Thomas, 1990 doi:10.2973/odp.proc.sr.113.123.1990; Kennett and Stott, 1990 doi:10.2973/odp.proc.sr.113.188.1990; Katz and Miller, 1990 doi:10.2973/odp.proc.sr.114.147.1991). The primary cause of the extinction of the Stensioina beccariiformis assemblage is elusive, but may have resulted from the cessation of deep-water formation in the Antarctic (Katz and Miller, 1990), and subsequent arrival of warm saline deep water (Thomas, 1990; Kennett and Stott, 1990). Another possibility may be a weakened influence of high-salinity water formed at the low latitudes such as the Tethys Sea. The extinction event corresponds to the change from higher delta13C values in benthic foraminifers to lower ones. An interpretation of delta13C values is that the eastern Indian deep water, characterized by young and nutrient-depleted water, became old water which was devoid of a supply of new water during the latest Paleocene to early Eocene. Prior to this benthic event, signals of related faunal change were detected in the following short periods: early and late Paleocene, near the boundary of nannofossil Zone CP4, and Zone CP5 of the late Paleocene at Site 752. Among common taxa in the upper Maestrichtian, only seven species disappeared or became extinct at the Cretaceous/ Tertiary boundary at Site 752. The benthic foraminiferal population did not change for up to 2 m above the boundary, in contrast to the rapid decrease of the plankt onic foraminiferal population at the boundary. A decrease in the number of benthic foraminifers occurs after that level, corresponding to an interval of decreased numbers of planktonic foraminifers and higher abundance of volcanic ash. Reduced species diversity (H') suggests a secondary effect attributable to the dissolution of foraminiferal tests. The different responses of planktonic and benthic foraminifers to the event just above the boundary suggest that the Cretaceous/Tertiary event was a surface event as also suggested by Thomas (1990). In addition, a positive shift of delta13C in benthic foraminifers after the event indicates nutrient-depleted bottom water at Site 752.

Illustrations of manganese nodules dredged from the Upper Jarvis Inlet

Manganese-iron oxide concretions are presently forming on Patrick Sill in upper Jervis Inlet. The marine geology of Patrick Sill and the adjoining basins (Queen's Reach and Princess Royal Reach) was studied to define the environment in which the concretions form. The river at the inlet head is the principal source of sediment to the upper basin. The average grain size of surficial bottom sediments within this basin decreases uniformly with distance from the source. Patrick Sill separates the upper from the lower basin. The sediment distribution pattern within the lower basin differs markedly from the upper basin as there is no dominant source of material but rather many localized sources. Abundant shallow marine faunal remains recovered in deep water sediment samples indicate that sediments deposited as deltas off river and stream mouths periodically slump to the basin floors. Geologic and optical turbidity information for the upper basin can best be explained by slumping from the delta at the inlet head with the initiation of turbidity or density currents. Patrick Sill appears to create a downstream barrier to this flow. The mineralogy of the bottom sediments indicates derivation from a granitic terrain. If this is so, the sediments presently being deposited in both basins are reworked glacial materials initially derived by glacial action outside the present watershed. Upper Jervis Inlet is mapped as lying within a roof pendant of pre-batholithic rocks, principally slates. Patrick Sill is thought to be a bedrock feature mantled with Pleistocene glacial material. The accumulation rate of recent sediments on the sill is low especially in the V-notch or medial depression. The manganese-iron oxide concretions are forming within the depression and apparently nowhere else in the study area. Also forming within the depression are crusts of iron oxide and what are tentatively identified as glauconite-montmorillonoid pellets. The concretions are thought to form by precipitation of manganese-iron oxides on pebbles and cobbles lying at the sediment water interface. The oxide materials are mobile in the reducing environment of the underlying clayey-sand sediment but precipitate on contact with the oxygenating environment of the surficial sediments. The iron crusts are thought to be forming on extensive rocky surfaces above the sediment water interface. The overall appearance and evidence of rapid formation of the crusts suggests they formed from a gel in sea water. Reserves of manganese-iron concretions on Patrick Sill were estimated to be 117 metric tons. Other deposits of concretions have recently been found in other inlets and in the Strait of Georgia but, to date, the extent of these has not been determined.

Mud, sand, heavy and light minerals composition in lower Cretaceous at DSDP Hole 93-603B

During the drilling of Hole 603B on Deep Sea Drilling Project Leg 93, an unexpected series of sand-, silt-, and claystone turbidites was encountered from Cores 603B-45 through -76 (1224-1512 m sub-bottom depth). Complete and truncated Bouma sequences were observed, some indicating deposition by debris flows. Sand emplacement culminated with the deposition of a 30-m-thick, unconsolidated sand unit (Cores 603B-48 through -45). The purpose of this preliminary study is to determine the nature of the heavy mineral suites of this sediment in order to make tentative correlations with onshore equivalents. The heavy mineralogy of Lower Cretaceous North American mid-Atlantic coastal plain sediment has been extensively studied. This sediment is classified as the Potomac Group, which has a varied heavy mineral suite in its lower part (Patuxent Formation), and a limited suite in its upper part (Patapsco Formation). The results of this study reveal a similar trend in the heavy mineral suites of sediment in Hole 603B. Hauterivian through lower Barremian sediment has a heavy mineral suite that is dominated by zircon, apatite, and garnet, with minor amounts of staurolite and kyanite. Beginning in the mid-Barremian, a new source of sediment becomes dominant, one which supplies an epidote-rich heavy mineral suite. The results of the textural analyses show that average grain size of the light mineral fraction increases upsection, whereas sorting decreases. The epidote-rich source may have delivered sediment with a slightly coarser mean grain size. This sediment may represent a more direct continental input at times of maximum turbidite activity (mid-Barremian) and during deposition of the upper, unconsolidated sand unit.

Upper Cretaceous sediments of ODP Hole 122-762C

Well-developed Campanian to Maestrichtian pelagic cyclic sediments were recovered from Hole 762C on the Exmouth Plateau, off northwest Australia, during Ocean Drilling Program Leg 122. The cycles consist of nannofossil chalk (light beds) and clayey nannofossil chalk (dark beds). Both light and dark beds are strongly to moderately bioturbated, alternate on a decimeter scale, and exhibit gradual boundaries. Bioturbation introduces materials from a bed of one color into an underlying bed of another color, indicating that diagenesis is not responsible for the cyclicity. Differences in composition between the light and dark beds, revealed by calcium carbonate measurement and X-ray diffraction analysis, together with trace fossil evidence, indicate that the cycles in the sediments are a depositional feature. Diagenetic processes may have intensified the appearance of the cycles. Spectral analysis was applied to the upper Campanian to lower Maestrichtian cyclic sediments to examine the regularity of the cycles. Power spectra were calculated from time series using Walsh spectral analysis. The most predominant wavelengths of the color cycles are 34-41 cm and 71-84 cm. With an average sedimentation rate of 1.82 cm/k.y. in this interval, we found the time durations of the cycles to be around 41 k.y. and 21 k.y., respectively, comparable to the obliquity and precession periods of the Earth's rotation, which strongly suggests an orbital origin for the cycles. On the basis of sedimentological evidence and plate tectonic reconstruction, we propose the following mechanism for the formation of the cyclic sediments from Hole 762C. During the Late Cretaceous, when there was no large-scale continental glaciation, the cyclic variations in insolation, in response to cyclic orbital changes, controlled the alternation of two prevailing climates in the area. During the wetter, equable, and warmer climatic phases under high insolation, more clay minerals and other terrestrial materials were produced on land and supplied by higher runoff to a low bioproductivity ocean, and the dark clayey beds were deposited. During the drier and colder climatic phases under low insolation, fewer clay minerals were produced and put into the ocean, where bioproductivity was increased and the light beds were deposited.

Upper Cretaceous agglutinated foraminifers from the western Pacific Ocean

Abyssal agglutinated foraminifers allow biostratigraphic correlation of Upper Cretaceous brown zeolitic claystones in Deep Sea Drilling Project Holes 196A and 198A and Ocean Drilling Program Holes 800A and 801 A. Three agglutinated foraminiferal zones subdivide the strata overlying the Campanian to Cenomanian cherts. The lower zone is characterized by Hormosina gigantea, which is a Campanian zonal marker in the North Atlantic Ocean and western Tethys. A major correlation level, which was observed in all holes studied, is based on the acme of evolute Haplophragmoides spp. This acme zone was observed in Sample 129-801A-6R-CC, about 9 m above the first occurrence of H. gigantea in Sample 129-801A-7R-1, 62-67 cm (approximately middle Campanian). The uppermost zone is characterized by dominant Paratrochamminoides spp. and in some instances common Bolivinopsis parvissimus (late Campanian to Maestrichtian). The available biostratigraphic data for the Upper Cretaceous of Sites 196, 198, 800, and 801 are correlated with the biochronologic framework of the North Atlantic, western Mediterranean, and Carpathians. Additionally, we use quantitative estimates of the diversity and abundance of agglutinated foraminiferal species to monitor general faunal trends with time in the western Pacific.