Detrital zircon geochronology data, petrographic point count data and paleocurrent indicator data of Triassic turbidites in the Nanpanjiang Basin, South China

Triassic turbidites of the Nanpanjiang basin of south China represent the most expansive and voluminous siliciclastic turbidite accumulation in south China. The Nanpanjiang basin occurs at a critical junction between the southern margin of the south China plate and the Indochina, Siamo and Sibumasu plates to the south and southwest. The Triassic Yangtze carbonate shelf and isolated carbonated platforms in the basin have been extensively studied, but silicilastic turbidites in the basin have received relatively little attention. Deciphering the facies, paleocurrent indicators and provenance of the Triassic turbidites is important for several reasons: it promises to help resolve the timing of plate collisions along suture zones bordering the basin to the south and southwest, it will enable evaluation of which suture zones and Precambrian massifs were source areas, and it will allow an evaluation of the impact of the siliciclastic flux on carbonate platform evolution within the basin. Turbidites in the basin include the Early Triassic Shipao Formation and the Middle-Late Triassic Baifeng, Xinyuan, Lanmu Bianyang and Laishike formations. Each ranges upward of 700 m and the thickest is nearly 3 km. The turbidites contain very-fine sand in the northern part of the basin whereas the central and southern parts of the basin also commonly contain fine and rarely medium sand size. Coarser sand sizes occur where paleocurrents are from the south, and in this area some turbidites exhibit complete bouma sequences with graded A divisions. Successions contain numerous alternations between mud-rich and sand-rich intervals with thickness trends corresponding to proximal/ distal fan components. Spectacularly preserved sedimentary structures enable robust evaluation of turbidite systems and paleocurrent analyses. Analysis of paleocurrent measurements indicates two major directions of sediment fill. The northern part of the basin was sourced primarily by the Jiangnan massif in the northeast, and the central and southern parts of the basin were sourced primarily from suture zones and the Yunkai massif to the south and southeast respectively. Sandstones of the Lower Triassic Shipao Fm. have volcaniclastic composition including embayed quartz and glass shards. Middle Triassic sandstones are moderately mature, matrix-rich, lithic wackes. The average QFL ratio from all point count samples is 54.1/18.1/27.8% and the QmFLt ratio is 37.8/ 18.1/ 44.1%. Lithic fragments are dominantly claystone and siltstone clasts and metasedimentary clasts such as quartz mica tectonite. Volcanic lithics are rare. Most samples fall in the recycled orogen field of QmFLt plots, indicating a relatively quartz and lithic rich composition consistent with derivation from Precambrian massifs such as the Jiangnan, and Yunkai. A few samples from the southwest part of the basin fall into the dissected arc field, indicating a somewhat more lithic and feldspar-rich composition consistent with derivation from a suture zone Analysis of detrial zircon populations from 17 samples collected across the basin indicate: (1) Several samples contain zircons with concordant ages greater than 3000 Ma, (2) there are widespread peaks across the basin at 1800 Ma and 2500, (3) a widespread 900 Ma population, (3) a widespread population of zircons at 440 Ma, and (5) a larger population of younger zircons about 250 Ma in the southwestern part which is replaced to the north and northwest by a somewhat older population around 260-290 Ma. The 900 Ma provenance fits derivation from the Jiangnan Massif, the 2500, 1800, and 440 Ma provenance fits the Yunkai massif, and the 250 Ma is consistent with convergence and arc development in suture zones bordering the basin on the south or southwest. Early siliciclastic turbidite flux, proximal to source areas impacted carbonate platform evolution by infilling the basin, reducing accommodation space, stabilizing carbonate platform margins and promoting margin progradation. Late arrival, in areas far from source areas caused margin aggradation over a starved basin, development of high relief aggradational escarpments and unstable scalloped margins.

(Appendix) Petrographic record from excavation profiles in Old-Luebeck (Liubice), north Germany

Die Frage einer Küstensenkung spielt seit Jahrzehnten bei der geologischen Erforschung des norddeutschen und niederländischen Flachlandes eine große Rolle. Der Schwerpunkt der bisherigen Arbeiten lag im südlichen Nordseeraum. Gerade dieses Gebiet bereitet aber wegen seines Aufbaues aus jungen, teilweise stark setzungsfähigen Gesteinen, des von Ort zu Ort und im Laufe der Zeit unterschiedlichen Einflusses der Gezeiten sowie wegen mancher anderer Bedingungen sehr große methodische Schwierigkeiten. Deshalb überrascht es nicht, daß die einzelnen Untersuchungen noch in den letzten beiden Jahrzehnten für die verschiedenen Abschnitte zu sehr abweichenden Folgerungen kamen, so daß die heute bekannten Einzeltatsachen nur ein recht widerspruchsvolles Gesamtbild ergeben. Da eine Klärung der Probleme durch eine Neubearbeitung an der Nordsee zunächst wenig erfolgversprechend erscheint, wird die Aufmerksamkeit unvermeidlich auf die Verhältnisse im südwestlichen Ostseeraum gelenkt. Hier bestehen in mancher Hinsicht einfachere Bedingungen, die eine derartige Untersuchung begünstigen. Vor allem die Nachbarschaft des skandinavischen Hebungsgebietes am gleichen Wasserbecken, die sehr geringen Gezeitenwirkungen und die hier weit verbreiteten Sandschüttungen bieten bessere Vergleichsmöglichkeiten und schalten viele Fehlerquellen aus. In der voliegenden Arbeit wurden die litorinazeitlichen und die nachlitorinazeitlichen Vertikalbewegungen des Landes und die eustatischen Schwankungen des Wasserstandes im südwestlichen Ostseeraum mit geologisch-morphologischen Methoden und durch die Auswertung von Lage und Verbreitung ur- und frühgeschichtlicher Funde sowie unter Auswertung von pollenanalytisch datierten Bohrprofilen und Pegelaufzeichnungen untersucht.

(Table 3) Description of petrographic profiles in Mittelholstein, Germany

In der vorliegenden Arbeit wird nach morphologischen und sedimentpetrographischen Methoden die Entwässerung der würmzeitlichen Eisrandlagen Mittelholsteins untersucht. Das Untersuchungsgebiet liegt im Mittelteil des nördlichen Holsteins. Im Norden und Osten schließt es etwa mit den Orten Gr. Vollstedt-Blumenthal-Stolpe-Tensfeld, im Süden mit dem Tal der Tensfelder und Oster- bzw. Bram-Au, während es im Westen durch die Höhen der Riß-Moränen zwischen Kellinghusen und Brammer abgegrenzt wird. Morphologisch zeigt sich eine Dreiteilung: im Norden und Osten die würmzeitliche Jungmoräne, im Westen und Süden die rißzeitliche Altmoräne, zwischen beiden die Sander- und Abflussebenen der Würm-Vereisung.

Magnetic and petrographic properties of ODP Site 120-747 (Table 1)

Carbonate sediments from the Kerguelen Plateau (ODP Leg 120) of Eocene to Pliocene age were investigated with rock magnetic, petrographic and geochemical methods to determine the carriers of remanent magnetization. Magnetic methods showed that the major magnetic minerals were titanomagnetites slightly larger than single domain particles. Submicrometre to micrometre-size grains of titanomagnetite were identified as inclusions in volcanic glass particles or as crystals in lithic clasts. Volcanic fallout ash particles formed the major fraction of the magnetic extract from each sediment sample. Three groups of volcanic ashes were identified: trachytic ashes, basaltic ashes with sideromelane and tachylite shards, and palagonitic ashes. These three groups could be equally well defined based on their magnetic hysteresis properties and alternating field demagnetization curves. The highest coercivities of all samples were found for the tachylite, due to the submicrometre-size titanomagnetite inclusions in the matrix. Trachytic ashes had intermediate magnetic properties between the single-domain-type tachylites and the palagonitic (altered) basaltic ashes with low coercivities. Samples which contained mixtures of these different volcanic ashes could be distinguished from the three types of ashes based on their magnetic characteristics. There was neither evidence of biogenic magnetofossils in the transmission electron micrographs nor did we find magnetic particles derived from continental Antarctica. The presence of dispersed volcanic fallout ashes between visible ash layers suggests continuous explosive volcanic activity on the Kerguelen Plateau in the South Indian Ocean since the early Eocene. The continuous fallout of volcanic ash from explosive volcanism on the Kerguelen Archipelago is the source of the magnetic particles and thus responsible for the magnetostratigraphy of the nannofossil oozes drilled during Leg 120.

(Table 1) Maceral composition and organic carbon chemistry of ODP Leg 104 samples

The Cenozoic sediments sampled in ODP Leg 104 on the Vøring Plateau show a distinct variability of the total organic carbon content (TOC) and the accumulation rates of TOC. Based on the geochemical and organic-petrographic characterization of the sedimentary organic matter (OM), the allochthonous and autochthonous proportion of the OM could be quantified. The results clearly demonstrate that high TOC percentages and TOC accumulation rates in Cenozoic sediment sections display a generally high input of allochthonous organic matter. Oxidized and partly well-rounded organic particles built up the main portion of OM within the Miocene, TOC-rich sediments. The most probable source of this oxidized OM are reworked sediments from the Scandinavian shelf. Changes in the input of these organic particles are to some degree correlative with sea-level changes. The Cenozoic accumulation of autochthonous OM is low and does not reveal a clear variation during the Miocene and early Pliocene. In spite of a high accumulation rate of biogenic opal during the Early Miocene, the accumulation rate of autochthonous TOC is low. The autochthonous particle assemblage is dominated by relatively inert OM, like dinoflagellate cysts. This points to an intensive biological and/or early diagenetic degradation of the marine OM under well oxidized bottom water conditions during the last 23 Myr. Nevertheless, a continuation of marine OM degradation during later stages of diagenesis cannot be excluded. A prominent dominance of allochthonous OM over autochthonous is documented with the beginning of the Pliocene. At 2.45 Ma the episodic occurrence of ice-rafted, thermally mature OM reflects the onset of the glacial erosion of Mesozoic, coal and black shale bearing sediments on the Scandinavian and Barents Sea shelves. The first occurrence of these, in view of the actual burial depth, thermally overmature OM particles is, therefore, a marker for the beginning of the strong Scandinavian glaciation and the advance of the glacial front toward the shelves.

(Table 2) Geochemistry of ore minerals and magnetization properties at the DSDP Leg 73 Holes

The samples investigated in this study come from DSDP Leg 73 Drill Holes 519A, 522B, and 524, all of which are in the South Atlantic. A general petrographic description of the basalts is given by Carman et al. (1984; doi:10.2973/dsdp.proc.73.120.1984).

Chemical composition of basalts from the Atlantic Ocean

Basalt recovered beneath Jurassic sediments in the western Atlantic at Deep Sea Drilling Project sites 100 and 105 of leg 11 has petrographic features characteristic of water-quenched basalt extruded along modern ocean ridges. Site 100 basalt appears to represent two or three massive cooling units, and an extrusive emplacement is probable. Site 105 basalt is less altered and appears to be a compositionally homogeneous pillow lava sequence related to a single eruptive episode. Although the leg 11 basalts are much more closely related in time to the Triassic lavas and intrusives of eastern continental North America, their geochemical features are closely comparable to those of modern Mid-Atlantic Ridge basalts unrelated to postulated "mantle plume" activity. Projection of leg 11 sites back along accepted spreading "flow lines" to their presumed points of origin shows that these origins are also outside the influence of modern" plume" activity. Thus, these oldest Atlantic seafloor basalts provide no information on the time of initiation of these "plumes". The Triassic continental diabases show north to south compositional variations in Rb, Ba, La, and Sr which lie within the range of " plume "-related basalt on the Mid-Atlantic Ridge (20° - 40° N) This suggests that these diabases had mantle sources similar in composition to those beneath the present Mid-Atlantic Ridge. "Plumes" related to deep mantle sources may have contributed to the LIL-element enrichment in the Triassic diabase and may also have been instrumental in initiating the rifting of the North Atlantic. Systematically high values for K and Sr87/Sr86 in the Triassic diabases may reflect superimposed effects of crustal contamination in the Triassic magmas.

Stable oxygen and carbon isotope compositions of Campanian grainstones and rudstones

Petrographic descriptions and stable oxygen and carbon isotope compositions of microsamples of Campanian-age sediment gravity-flow deposits from Northeast Providence Channel, Bahamas, indicate deep-marine cementation of shallow-marine skeletal grains that were transported to the channel during the Late Cretaceous. Shallow-marine components are represented by mollusks, especially rudists, and shallow-water benthic foraminifers as well as sparse echinoderm and algal grains. The sole evidence of diagenesis in shallow-marine environments consists of micrite envelopes around skeletal grains. Shallow-marine skeletal grains have mean stable isotope values of -3.1 per mil d18O and +2.6 per mil d13C. The d18O values are consistent with precipitation in equilibrium with warm (20°-30°C), shallow-marine water. Deep-marine components are represented by equant calcite spar cements and rip-up clasts of slope sediments. Spar cements, exhibiting hexagonal morphology with scalenohedral terminations, most commonly occur as thin isopachous linings in the abundant porosity. Deep-marine cements have mean stable isotope values of - 1.1 per mil d18O and +2.7 per mil d13C. Deep-marine cements are 18O-enriched relative to shallow-marine skeletal grains, consistent with precipitation in equilibrium with colder (10°-20°C), deep-marine waters. The cement .source during lithification appears to have been dissolution of aragonite and high-magnesium calcite skeletal grains, which made up part of the transported sediment. Interbedded periplatform ooze remains uncemented, or poorly cemented, probably because of lower permeability. Equant spar cements that occur in gravity-flow deposits recovered from Hole 634A have stable isotope compositions similar to spars in Lower and mid-Cretaceous shallow-water limestones exposed on the Bahama Escarpment, to Campanian-Paleocene deep-marine hardgrounds recovered during DSDP Leg 15 in the Caribbean, and to spars in Aptian-Albian talus deposits at the base of the Campeche Escarpment recovered during DSDP Leg 77.

(Table 2) Mineralogy and carbon, oxygen, and hydrogen isotope ratios for secondary mineral samples from igneous rocks from ODP Hole 128-794D

The basaltic rocks of Hole 794D drilled during Leg 128 are strongly altered. Microprobe analyses and XRD spectra on small quantities of matter extracted from thin sections show that primary minerals and glassy zones of the groundmass are totally or partially replaced by clay minerals with chlorite/saponite mixed-layer composition whatever the rock sample considered. This mixed-layer was also identified in veins and vesicles where it crystallizes in spheroidal aggregates. The largest veins and vesicles are filled by a zoned deposit: the chlorite/saponite mixed-layer always occupies the central part and is rimmed by pure saponite. Calcite crystallizes in secondary fractures which crosscut the clayey veins and vesicles. Chemographic analysis based on the M+-4Si-3R2+ projection shows that the chemical composition of the saponite component in the mixed-layer is identical to that of the free saponite. This indicates that the clay mineral crystallization was controlled by the chemical composition of the alteration fluids. From petrographic evidence, it is suggested that both chlorite/saponite mixed-layer and free saponite belong to the same hydrothermal event and are produced by a temperature decrease. This is supported by the stable isotopic data. The isotopic data show very little variation: d18O saponite ranges from 13.1 per mil to 13.5 per mil, and dD saponite from -73.6 per mil to -70.0 per mil. d18O calcite varies from +19.7 per mil to +21.9 per mil vs SMOW and d13C from -3.2 per mil to +0.4 per mil vs. PDB. These values are consistent with seawater alteration of the basalt. The formation of saponite took place at 150°-180°C and the formation of calcite at about 65°C.