Medem Channel profiles based on stand-alone model simulation and corrections with nudging

State-of-the-art process-based models have shown to be applicable to the simulation and prediction of coastal morphodynamics. On annual to decadal temporal scales, these models may show limitations in reproducing complex natural morphological evolution patterns, such as the movement of bars and tidal channels, e.g. the observed decadal migration of the Medem Channel in the Elbe Estuary, German Bight. Here a morphodynamic model is shown to simulate the hydrodynamics and sediment budgets of the domain to some extent, but fails to adequately reproduce the pronounced channel migration, due to the insufficient implementation of bank erosion processes. In order to allow for long-term simulations of the domain, a nudging method has been introduced to update the model-predicted bathymetries with observations. The model-predicted bathymetry is nudged towards true states in annual time steps. Sensitivity analysis of a user-defined correlation length scale, for the definition of the background error covariance matrix during the nudging procedure, suggests that the optimal error correlation length is similar to the grid cell size, here 80-90 m. Additionally, spatially heterogeneous correlation lengths produce more realistic channel depths than do spatially homogeneous correlation lengths. Consecutive application of the nudging method compensates for the (stand-alone) model prediction errors and corrects the channel migration pattern, with a Brier skill score of 0.78. The proposed nudging method in this study serves as an analytical approach to update model predictions towards a predefined 'true' state for the spatiotemporal interpolation of incomplete morphological data in long-term simulations.

(Figure 2) Suspended sediment concentration profiles from samples in the outer harbor of Emden, Germany

One particularly complex phenomenon is the episodic, tidally driven variation of navigable depth level as a result of fluid mud settlement. This paper presents results from dynamic cone penetration testing with pore pressure measurement (CPTU) as a nonacoustical, direct device to support surveying and management of these areas. The new technique is modular and uses a disk configuration for fluid mud detection. Both disk resistance and pore pressure measurements accurately identify suspended matter concentrations of 90 g/L or more, and the transition from fluid mud to consolidating mud once concentrations exceed 150 g/L. Hence, the procedure attests the potential for rapid, reliable assessment of a fluid mud layer and concurrent characterization of the underlying consolidated sediment by monitoring the pore pressure and strength changes during penetration.

Sea surface temperature reconstruction on three sediment profiles off Portugal

Sea Surface Temperature (SST), river discharge and biological productivity have been reconstructed from a multi-proxy study of a high-temporal-resolution sedimentary sequence recovered from the Tagus deposition center off Lisbon (Portugal) for the last 2000 years. SST shows 2 °C variability on a century scale that allows the identification of the Medieval Warm Period (MWP) and the Little Ice Age (LIA). High Iron (Fe) and fine-sediment deposition accompanied by high n-alkane concentrations and presence of freshwater diatoms during the LIA (1300-1900 AD) (Science 292 (2001) 662) suggest augmented river discharge, whereas higher total-alkenone concentrations point to increased river-induced productivity. During the MWP (550-1300 AD) (Science 292 (2001) 662) larger mean-grain size and low values of magnetic susceptibility, and concentrations of Fe, n-alkanes, and n-alcohols are interpreted to reflect decreased runoff. At the same time, increased benthic and planktonic foraminifera abundances and presence of upwelling related diatoms point to increased oceanic productivity. On the basis of the excellent match found between the negative phases of the North Atlantic Oscillation (NAO) index and the intensified Tagus River discharge observed for the last century, it is hypothesized that the increased influx of terrigenous material during the LIA reflects a negative NAO-like state or the occurrence of frequent extreme NAO minima. During the milder few centuries of the MWP, stronger coastal upwelling conditions are attributed to a persistent, positive NAO-like state or the frequent occurrence of extreme NAO maxima. The peak in magnetic susceptibility, centered at 90 cm composite core depth (ccd), is interpreted as the result of the well-known 1755 AD Lisbon earthquake. The Lisbon earthquake and accompanying tsunami are estimated to have caused the loss of 39 cm of sediment (355 years of record-most of the LIA) and the instantaneous deposition of a 19-cm sediment bed.

Radiosonde profiles and meteorological observations during Atlantic Expedition M2 in 1965 (IQSY) of RV "Meteor"

A radiosonde is described for measuring the upward and downward fluxes of visible light in the atmosphere. Photoresistors are used as sensors, the optical center of the spectral range beeing at 0.55 µ. The results of these flux-measurements obtained during the Atlantic Expedition 1965 with the research vessel "Meteor" are presented. The datas have been divided into three groups according to the amount of cloudiness. In group a) (small cloudiness) the extinction coefficient of the prevailing linear radiation is derived as a function of the height. Characteristics of airmasses of maritime or continental origin are shown. In group b) (cloud covered sky) microphysical quantities are determined from the radiative lapse rate in the clouds. The average radius of droplets is found to lie between 5.5 µm and 14.4 µm. The albedo of cloud surfaces varies between 25% and 54%, the transmission values are between 58% and 73%. One ascent through a Cirrus cloud of considerable vertical thickness is treated seperately. The observed distribution of extinction is compared with theoretical values in water clouds leading to the same order of magnitude. The relation between the albedo of the surface of the sea and the amount of cloudiness is discussed.

Phosphate d18O pore-water profiles of sediment core GeoB11807-2 and GeoB11804-4

Phosphorus cycling in the ocean is influenced by biological and geochemical processes that are reflected in the oxygen isotope signature of dissolved inorganic phosphate (Pi). Extending the Pi oxygen isotope record from the water column into the seabed is difficult due to low Pi concentrations and small amounts of marine porewaters available for analysis. We obtained porewater profiles of Pi oxygen isotopes using a refined protocol based on the original micro-extraction designed by Colman (2002). This refined and customized method allows the conversion of ultra-low quantities (0.5 - 1 µmol) of porewater Pi to silver phosphate (Ag3PO4) for routine analysis by mass spectrometry. A combination of magnesium hydroxide co-precipitation with ion exchange resin treatment steps is used to remove dissolved organic matter, anions, and cations from the sample before precipitating Ag3PO4. Samples as low as 200 µg were analyzed in a continuous flow isotope ratio mass spectrometer setup. Tests with external and laboratory internal standards validated the preservation of the original phosphate oxygen isotope signature (d18OP) during micro extraction. Porewater data on d18OP has been obtained from two sediment cores of the Moroccan margin. The d18OP values are in a range of +19.49 to +27.30 per mill. We apply a simple isotope mass balance model to disentangle processes contributing to benthic P cycling and find evidence for Pi regeneration outbalancing microbial demand in the upper sediment layers. This highlights the great potential of using d18OP to study microbial processes in the subseafloor and at the sediment water interface.

Radiocarbon dating of peat profiles from the subarctic ecoclimatic region, west-central Canada

Long-term vegetation succession and permafrost dynamics in subarctic peat plateaus of west-central Canada have been studied through detailed plant macrofossil analysis and extensive AMS radiocarbon dating of two peat profiles. Peatland inception at these sites occurred around 5800-5100 yr BP (6600-5900 cal. BP) as a result of paludification of upland forests. At the northern peat plateau site, located in the continuous permafrost zone, palaeobotanical evidence suggests that permafrost was already present under the forested upland prior to peatland development. Paludification was initiated by permafrost collapse, but re-aggradation of permafrost occurred soon after peatland inception. At the southern site, located in the discontinuous permafrost zone, the aggradation of permafrost occurred soon after peatland inception. In the peat plateaus, permafrost conditions have remained very stable until present. Sphagnum fuscum-dominated stages have alternated with more xerophytic communities characterized by ericaceous shrubs. Local peat fires have occurred, but most of these did not cause degradation of the permafrost. Starting from 2800-1100 yr BP (2900-1000 cal. BP) consistently dry surface conditions have prevailed, possibly related to continued frost heave or nearby polygon crack formation.

Lithology and pollen record of 4 profiles from the Bavaria, southern Germany

Palynological investigations of sediments from northern Bavaria (Rhön, Grabfeld, Lange Berge) reveal the Late Glacial and Postglacial history of the regional vegetation. The older sedirnents were found in the Rhön (Schwarzes Moor) and date back into the Bölling Period. At the end of that period pine spread into the Grabfeld. In both areas Lacher Tuff has been found. A radiocarbon date of 10,300 BP was found for the Late Glacial - Postglacial transition and one of 9300 BP for the Preboreal - Boreal transition. Hazel reached its highest values in the Rhön around 7,400 BP. During the Atlanticum a deciduous mixed oak forest covered the Rhön and Grabfeld regions. Beech dominated since the Subatlanticum. In the Lange Berge region, however, a mixed forest with Fagus, Picea, Pinus and Abies developed. In the Rhön first anthropogenic influence was found during the Latene Period. The boundary between zone IX and X has been dated at 820 A.D., and the start of extensive forest clearances at 1000 A. D. A culmination of landuse was found for the Medieval Period. At the end of that period however the Rhön was deserted. New forest clearances started around 1500 A.D., but were interrupted by the 'Thirty Years War'. Afterwards the Rhön got its present appearance.

Grain size composition of 275 sediment profiles from the Arctic seas

This data set contains grain size analyses of bottom sediments collected by scientists from the V.P. Zenkovich Laboratory of Shelf and Sea Coasts (P.P. Shirshov Institute of Oceanology, Russian Academy of Sciences) during the Project ''Arctic Shelf of the Eurasia in the Late Quaternary'' in a number of expeditions to the Barents, Kara, East Siberian and Chukchi Seas on board the research vessels R/V Professor Shtokman, H/V Dmitry Laptev, H/V Malygin, and icebreaker Georgy Sedov since 1978. The analyses have been carried out according to the methods published by Petelin (1967) in the Analytical Laboratory of the P.P. Shirshov Institute of Oceanology. Archiving and electronic publication was performed through a data rescue by Evgeny Gurvich in 2003.

Geochemistry on interstitial water of 5 sediment profiles from the Persian Gulf

The landward part of the 7 km wide sabkha at Umm Said, SE Qatar, is filled with a stagnant brine virtually saturated with halite. Recent dolomite occurs in the sabkha sediments, the quantity being fully accounted for by the amount of Mg++ ions lost from the interstitial brine. The existence of a reflux system in the seaward parts of the sabkha was established. It was not, however, possible to gi ve any unequivocal demonstration of the effect of this potential system for dolomitization . Although both a reflux mechanism and Recent dolomite formation occur in this tidal flat, the first process has apparently not influenced the second sufficiently to permit the demonstration of reflux dolomitization.

Oxygen and silica flux from 9 multicorer profiles

Pore water profiles from 24 stations in the South Atlantic (located in the Guinea, Angola, Cape, Guyana, and Argentine basins) show good correlations of oxygen and silicon, suggesting microbially mediated dissolution of biogenic silica. We used simple analytical transport and reaction models to show the tight coupling of the reconstructed process kinetics of aerobic respiration and silicon regeneration. A generic transport and reaction model successfully reproduced the majority of Si pore water profiles from aerobic respiration rates, confirming that the dissolution of biogenic silica (BSi) occurs proportionally to O2 consumption. Possibly limited to well-oxygenated sediments poor in BSi, benthic Si fluxes can be inferred from O2 uptake with satisfactory accuracy. Compared to aerobic respiration kinetics, the solubility of BSi emerged as a less influential parameter for silicon regeneration. Understanding the role of bacteria for silicon regeneration requires further investigations, some of which are outlined. The proposed aerobic respiration control of benthic silicon cycling is suitable for benthic-pelagic models. The empirical relation of BSi dissolution to aerobic respiration can be used for regionalization assessments and estimates of the silicon budget to increase the understanding of global primary and export production patterns.

PanPlot - software to visualize profiles and core logs

The program PanPlot was developed as a visualization tool for the information system PANGAEA. It can be used as a stand-alone application to plot data versus depth or time or in a ternary view. Data input format is tab-delimited ASCII (e.g. by export from MS-Excel or from PANGAEA). The default scales and graphic features can individualy be modified. PanPlot graphs can be exported in platform-specific interchange formats (EMF, PICT) which can be imported by graphic software for further processing.