Physical properties of deep sea sediments

Erstmals quantitativ bearbeitete Rutschungen aus dem Tiefseebereich des äquatorialen Ostatlantiks liegen auf Hängen von 0,4 Grad und 0,7 Grad - das ist sehr viel flacher als die für statische Rutschungsauslösung benötigte kritische Hangneigung (14 Grad bis 16 Grad ). Im Gegensatz zu Flachwassergebieten kann bei Wassertiefen von über 4000 m natürlich der Einfluß von Wellenwirkung und Tidenhub auf die Hangstabilität vernachlässigt werden. Die Sedimentationsraten sind in diesem Bereich zur Bildung eines Porenwasserüberdruckes vielfach zu niedrig. Nach den Hangstabilitätsanalysen bilden hier Erdbeben den wirksamsten Auslösemechanismus für die Rutschungen. Dies gilt auch für Rutschungen an den Kontinentalrändern von Nordwest- und Westafrika sowie für das europäische Nordmeer und für Rutschungen im nördlichen Fidji-Becken. Das Alter der besonders gut datierten Rutschungen vom nordwestafrikanischen Kontinentalrand und der Tiefsee des äquatorialen Ostatlantiks schwankt zwischen 16,000 J.v.h. und 18,000 J.v.h. sowie etwa 130,000 J.v.h.. Es handelt sich dabei um Phasen des Beginns besonders starker Meeresspiegelschwankungen. Ein Vergleich der Meeresspiegelkurve mit dem Alter älterer Rutschungen zeigt ebenfalls eine Parallele mit Zeiten von Regressionen und Transgressionen. Durch die Meeresspiegelschwankungen werden isostatische Vertikalbewegungen des Tiefseebodens von bis zu 30 m bewirkt, die Spannungen in den Lithosphärenplatten erzeugen. Sie allein sind jedoch nicht groß genug, um Brüche in intakten Plattenbereichen zu verursachen. Entlang alter, ehemals aktiver Transform-Bruchzonen (Fracture Zones) können jedoch die aufgebauten Spannungen eher wieder abgebaut werden. Dabei entstehen kleinere Erdstösse und führen zur Auslösung von Rutschungen. Ein Vergleich der Verbreitung von Transform-Störungen und Rutschungen vor Norwegen, Nordwest- und Westafrika sowie vor dem südlichen Afrika zeigt, daß in diesen Gebieten Rutschmassen tatsächlich besonders häufig entlang und in der Verlängerung von Fracture Zones auftreten. Modellrechnungen, die mit typischen Werten für Hangwinkel (0,5 Grad bis 3 Grad) von Tiefseeböschungen und passive Kontinentalränder sowie für häufig ermittelte Scherfestigkeitsgradienten im Sediment (0,5 kPa/m bis 1,7 kPa/m) durchgeführt wurden, ergaben, daß in Gebieten mit normal konsolidierten Sedimenten (ohne Porenwasserüberdruck) nur Erdbeben Rutschungen ausgelöst haben können.

Geochemistry, fluxes and nitrogen isotopic composition data of traps LP1 and EBC2-1 and cores GeoB4242-4 and Geo4301-1

We compare total and biogenic particle fluxes and stable nitrogen isotope ratios (d15N) at three mooring sites along a productivity gradient in the Canary Islands region with surface sediment accumulation rates and sedimentary d15N. Higher particle fluxes and sediment accumulation rates, and lower d15N were observed in the upwelling influenced eastern boundary region (EBC) compared to the oligotrophic sites north of Gran Canaria [European Station for Time-Series in the Ocean, Canary Islands (ESTOC]] and north of La Palma (LP). The impact of organic matter degradation and lateral particle advection on sediment accumulation was quantified with respect to the multi-year flux record at the ESTOC. Remineralisation of organic matter in the water column and at the sediment surface resulted in an organic carbon preservation of about 0.8% and total nitrogen preservation of about 0.4% of the estimated export production. Higher total and carbonate fluxes and accumulation rates in the lower traps and surface sediment compared to the upper traps indicated that at least 50% of the particulate matter at the ESTOC was derived from allochthonous sources. Low d15N values in the lower traps of the ESTOC and LP point to a source region influenced by coastal upwelling. We conclude from this study that the reconstruction of export production or nutrient regimes from sedimentary records in regions with strong productivity gradients might be biased due to the mixture of particles originating from autochthonous and allochthonous sources. This could result in an imprint of high productivity signatures on sedimentation processes in oligotrophic regions.

Granulometry, biogenic silica content, magnetic susceptibility and bulk densities of ODP Site 188-1165

The Prydz Bay area is a key region for studying and understanding the history of the eastern Antarctic Continental Ice Sheet (O'Brien, Cooper, Richter, et al., 2001, doi:10.2973/odp.proc.ir.188.2001). Ocean Drilling Program (ODP) Site 1165 is situated in a water depth of 3357 m on the continental rise offshore from Prydz Bay and lies in front of the outlet for the Lambert Glacier-Amery Ice Shelf system that today drains 22% of East Antarctica. The site was drilled into mixed pelagic and hemipelagic sediments from the southwestern side of the Wild Drift. The drift is an elongate sediment body formed by the interaction of sediment supplied from continental shelf and slope with westward-flowing bottom currents. The sedimentary sequence is characterized by alternations between a generally gray to dark gray facies and a green to greenish gray facies. The greenish facies are structureless diatom-bearing clays with common bioturbation and larger amounts (>15%-20%) of biogenic silica, dispersed clasts, and lonestones than the dark gray facies, which are mostly less bioturbated clay with some silt laminations (Shipboard Scientific Party, 2001, doi:10.2973/odp.proc.ir.188.103.2001). High-quality advanced piston corer and extended core barrel cores containing nearly complete sections of middle Miocene to early Pliocene age allow a detailed characterization of sedimentary cycles and can provide indications for ice advances of the Lambert Glacier system into Prydz Bay, for the extent of sea ice, and for changes in oceanic circulation. The purpose of this work is to provide a data set of coarse-fraction mass percentage (>63, >125, and >250 µm) and biogenic silica content measured on sediments of late Miocene to early Pliocene age drilled at Site 1165. Additionally, high-resolution records of magnetic susceptibility (MS) and gamma ray attenuation (GRA) bulk density are presented. These shipboard data sets were edited postcruise. Furthermore, I provide a high-resolution dry bulk density record that is derived from GRA bulk density and can be used for the calculation of mass accumulation rates. These sedimentological and physical parameters will be used in future work to understand the depositional pattern of alternating biogenic and terrigenous sediments that was observed at Site 1165 (Shipboard Scientific Party, 2001, doi:10.2973/odp.proc.ir.188.103.2001).

Geochemistry of DSDP Hole 91-596

Geochemical analyses of sediments from the top 24.5 m of Deep Sea Drilling Project hole 596 (23°51.20'S, 169°39.27'W) show great variability in the composition of pelagic clays accumulated in the South Pacific since the late Cretaceous. Elemental associations indicate that most of this variability can be attributed to variations in abundances of six sediment end-member components: detrital (eolian), andesitic (volcanic), hydrothermal, hydrogenous, phosphate (fish debris), and biogenic silica. We develop a sedimentation model which is used to infer processes that might have influenced the accumulation rates of these components over the last 85 million years. The accumulation of eolian detritus in the South Pacific shows some similarities to that observed in the North Pacific and has been largely controlled by global climate trends in the Cenozoic. Much of the variation in the accumulation of other sediment components likely reflects the paleoceanographic evolution of the South Pacific. The most notable change in the sedimentary environment occurred at about the Paleogene/Neogene boundary. At that time, significant changes in the color, mineralogy, and chemistry of the sediment probably reflect major shifts in climate mode as well as oceanic circulation in the central South Pacific region.

Eolian accumulation rates of ODP Leg 121 holes

The late Cenozoic history of eolian sedimentation in the eastern Indian Ocean was developed from samples recovered during drilling of Sites 752, 754, and 756. Temporal changes in the mass accumulation rate of eolian material reflect major climatic shifts in the southern African source region. A significant drop in dust mass flux values occurs near the end of the lower Oligocene. Younger sediments are characterized by a gradual reduction in dust accumulation rates until the middle Miocene after which values remain consistently low throughout the late Cenozoic, although a slight increase in eolian accumulation rate occurs near 2.5 Ma. This pattern of dust mass flux appears related to the supply of dust-sized particles in the source region and represents a shift in the climatic regime of southern Africa to increasingly more arid conditions throughout the late Cenozoic.

Late Cenozoic eolian dust accumulation in the eastern equatorial Pacific Ocean

Sediments recovered during Ocean Drilling Program (ODP) Leg 138 in the eastern equatorial Pacific Ocean were analyzed for variations in eolian accumulation rate and mean grain-size. Latitudinal and temporal patterns of these parameters showed important changes in the intensity of atmospheric circulation and eolian flux associated with the intertropical convergence zone (ITCZ) and suggested that eolian input parameters could be used to define its paleoposition through time. Modern atmospheric circulation in the equatorial region is weakest in the intertropical convergence zone and increases as the trade winds are approached to the north and south. Thus, the expected spatial pattern of eolian grain size would have the finest material deposited beneath the ITCZ and a coarsening of material in both directions away from this zone. Sediments from ODP Leg 138 show this pattern for much of the Pleistocene and Pliocene but, prior to about 4 Ma, begin to lose the northern coarse component suggesting that the ITCZ was located north of its present position during the late Miocene. Eolian flux records also show a latitudinal pattern of deposition associated with the position of the ITCZ that, similar to eolian grain-size variability, suggests a more northerly position of the ITCZ during the late Miocene. Overall, the regional input of eolian material to the equatorial Pacific has decreased throughout the late Neogene. This reduction in eolian input reflects climatic changes to relatively wetter conditions in the continental eolian source regions beginning during the late Pliocene.

Mechanical behavior of ODP Hole 137-504B basalts

Core samples of basalt collected from Hole 504B during Leg 137 were investigated regarding their mechanical behavior. The rock samples were measured for hardness, compression strength, and modulus of elasticity. Abrasion loss of weight and Shore sclerometer methods were used for determining hardness. Static and dynamic methods were used for calculating modulus of elasticity. Test results were compared with shipboard measurements of ultrasonic velocity and dry-bulk density. Test results were interpreted statistically to provide data not only on mechanical behavior changes of the rock but also on the precision of the methods used.

Diffusion transport of water in basalts

Studying diffusive transport in porous rocks is of fundamental importance in understanding a variety of geochemical processes including: element transfer, primary mineral dissolution kinetics and precipitation of secondary phases. Here we report new findings on the relationship between diffusive transport and textural characteristics of the pore systems on the example of mid-oceanic ridge basalts having different degree of alteration but very similar bulk pore volume. Diffusion processes in porous basalts were studied in situ using H2O -> D2O exchange experiments. The effective diffusion coefficients of water molecules increase systematically from 5.05*10**-11 to 1.19*10**-10 m**2/s for fresh and moderately altered basalts and from 2.40*10**-11 to 6.72*10**-11 m**2/s for completely altered basalt as temperature increases from 5 to 50 °C. The activation energy of the diffusion process increases from 12.29 ± 0.71 kJ/mol for fresh and moderately altered basalts to 14.3 ± 1.33 kJ/mol for completely altered basalt. The results indicate that neither the bulk porosity nor the degree of alteration can be used as proxies for the efficiency of element transport during MORB-water interaction. The formation of secondary phases that replace primary minerals and fill the pore space in the rock leads to the formation of tiny pores and phases with large specific surface area. These factors might have a dominant control on the transport properties of altered basaltic rocks.

Coarse-sand ice-rafted debris components and mass accumulation rates of ODP Site 152-918

To understand the late Cenozoic glacial history of the Northern Hemisphere, continuous long-term proxy records from climatically sensitive regions must be examined. Ice-rafted debris (IRD) from Ocean Drilling Program (ODP) Site 918, located in the Irminger Basin, is one such record. IRD in marine sediments is a direct indicator of the presence of glacial ice extending to sea level on adjacent landmasses, and, therefore, is an important paleoclimatic signal from the mid- to high latitudes. The IRD record at Site 918 is the first long-term ice-rafting record available for southeast Greenland, a region that may have been a key nucleation area for widespread glaciation during the late Cenozoic (Larsen et al, 1994, doi:10.2973/odp.proc.ir.152.1994). This data report presents the results of coarse sand-size IRD mass accumulation rate (MAR) analyses for Site 918 from the late Miocene through the Pleistocene. In addition, a preliminary analysis of IRD compositions is included. Detailed discussions of the local, regional, and global paleoclimatic implications of this data, and of the companion Site 919 Pleistocene IRD MAR data (Krissek, 1999, doi:10.2973/odp.proc.sr.163.118.1999), are in preparation. Such future work will include comparisons of these IRD MAR data sets to the Site 919 oxygen isotope stratigraphy developed by Flower (1998, doi:10.2973/odp.proc.sr.152.219.1998).

Diagenesis of siliceous particles in ODP Hole 114-699A

A number of neogenic opaline structures, not previously reported in the literature, as well as other neogenic phases are described from four Oligocene to Pliocene biosiliceous sediment samples from Hole 699A. The possible influence of microbes on the formation or the morphology of some of them is discussed. The samples, which are early Pliocene, early to middle Miocene, and late Oligocene (two) in age, were histologically fixed aboard ship upon retrieval. Investigations of the samples used SEM (with Edax/Tracor) and XRD methods. Diagenesis has affected all four samples, but the most extensive development of neoformed structures occurs in the Miocene and uppermost Oligocene samples, where microbial filaments (0.05 to 10 ?m long), microbial colonies, and siliceous microhemispheroids (0.2 to 0.7 µm diameter) were observed. The latter encrust filaments, diatoms, and detrital grains to varying degrees. Other neoformed structures include (1) flakes formed by coalesced microhemispheroids, some of which are guided by short, stubby filaments, which occur only in the Miocene and uppermost Oligocene samples, and (2) flakes characterized by smooth or microfissured surfaces, which grow on diatom frustules and in pore spaces and have a more widespread distribution. The XRD data indicate possible cristobalite formation in the Miocene and uppermost Oligocene samples; we believe that the neoformed opaline structures (encrusted filaments and microhemispheroids) may represent an early phase of opal-CT. The timing of neoformation of most of these features appears to have been fairly recent, continuing even at the time of sampling. There appears to be no direct correlation of this incipient, lower Miocene-uppermost Oligocene diagenetic layer and the pore-water chemistry profiles; a massive increase in shear strength in these sediments, however, may indicate some cementation. Smectite was identified by XRD as the most prominent clay mineral in these generally clay-poor sediments. Honeycombed minerals with filamentous edges, which could correspond to smectite, were observed with SEM in the pore spaces.

Manganese contents and accumulation rates in reduced bottom sediments of the Sea of Okhotsk

Manganese contents in reduced sediments and accumulation rates were investigated. Their values in sediments of most of cores are background (0.03-0.07 %).Anomalous concentrations (up to 2.5 %) and accumulation rates (up to 60 mg/cm**2/ka) occur near the known region of hydrothermal barite mineralization in the Derugin Basin. High accumulation rates of Mn (>10 mg/cm**2/ka) also occur in Holocene sediments to south-east from the Derugin Basin. It can be assumed that high Mn contents and accumulation rates occur there due to transportation of Mn-rich water from the Derugin Basin in the near-bottom layer under the lower border of the Sea of Okhotsk Intermediate Water. Intensive Mn accumulation is also typical for the South Okhotsk Basin near the Bussol Strait. Mn accumulation rates of glacial sediments of the second oxygen isotope stage are less significant, which is presumed to be caused by paleoceanological reasons.

14C ages of core top samples from Ontong-Java Plateau

Radiocarbon measurements on core tops from the Ontong-Java plateau confirm a previous finding by Berger and Killingley [1982] that at any given water depth, cores taken on the equator have higher accumulation rates and younger core top ages than their off-equator counterparts. Further, these new results fortify the conclusion by Broecker et al. [1991] that the increase in core top radiocarbon age with water depth rules out homogeneous dissolution within the pore waters as the dominant mechanism. Either most of the dissolution must occur prior to burial or it must occur during the first pass through the respiration-CO2-rich upper pore waters after which the calcite grains become armored against further dissolution. A puzzling aspect of this new data set is that despite the sizable difference in accumulation rate, the extent of dissolution as measured by either the CaCO3 content or the ratio of CaCO3 in the >150-µm size fraction to that in the < 63-µm fraction is no different off than on the equator. In order to reconcile the results of this study with those obtained by Hales and Emerson [1996] using in situ electrodes, it is necessary to call upon calcite armoring.

Geochemical provenance analysis of fine-grained sediment of sediment core AND1-1

Bulk chemical fine-grained sediment compositions from southern Victoria Land glacimarine sediments provide significant constraints on the reconstruction of sediment provenance models in the McMurdo Sound during Late Cenozoic time. High-resolution (~ 1 ka) geochemical data were obtained with a non-destructive AVAATECH XRF Core Scanner (XRF-CS) on the 1285 m long ANDRILL McMurdo Ice Shelf Project (MIS) sediment core AND-1B. This data set is complemented by high-precision chemical analyses (XRF and ICP-OES) on discrete samples. Statistical analyses reveal three geochemical facies which are interpreted to represent the following sources for the sediments recovered in the AND-1B core: 1) local McMurdo Volcanic Group (MVG) rocks, 2) Transantarctic Mountain rocks west of Ross Island (W TAM), and 3) Transantarctic Mountain rocks from more southerly areas (S TAM). Data indicate in combination with other sediment facies analyses (McKay et al., 2009, doi:10.1130/B26540.1) and provenance scenarios (Talarico and Sandroni, 2009, doi:10.1016/j.gloplacha.2009.04.007) that diamictites at the drill site are largely dominated by local sources (MVG) and are interpreted to indicate cold polar conditions with dry-based ice. MVG is interpreted to indicate cold polar condition with dry-based ice. A mixture of MVG and W TAM is interpreted to represent polar conditions and the S TAM facies is interpreted to represent open-marine conditions. Down-core variations in geochemical facies in the AND-1B core are interpreted to represent five major paleoclimate phases over the past 14 Ma. Cold polar conditions with major MVG influence occur below 1045 mbsf and above 120 mbsf. A section of warmer climate conditions with extensive peaks of S TAM influence characterizes the rest of the core, which is interrupted by a section from 525 to 855 mbsf of alternating influences of MVG and W TAM.

Phosphorus partition and acumulation rates in sediments of ODP Legs 130 and 138

Understanding phosphorus (P) geochemistry and burial in oceanic sediments is important because of the role of P for modulating oceanic productivity on long timescales. We investigated P geochemistry in seven equatorial Pacific sites over the last 53 Ma, using a sequential extraction technique to elucidate sedimentary P composition and P diagenesis within the sediments. The dominant P-bearing component in these sediments is authigenic P (61-86% of total P), followed in order of relative dominance by iron-bound P (7-17%), organic P (3-12%), adsorbed P (2-9%), and detrital P (0-1%). Clear temporal trends in P component composition exist. Organic P decreases rapidly in younger sediments in the eastern Pacific (the only sites with high sample resolution in the younger intervals), from a mean concentration of 2.3 µmol P/g sediment in the 0-1 Ma interval to 0.4 µmol/g in the 5- 6 Ma interval. Over this same time interval, decreases are also observed for iron-bound P (from 2.1 to 1.1 µmol P/g) and adsorbed P (from 1.5 to 0.7 µmol P/g). These decreases are in contrast to increases in authigenic P (from 6.0-9.6 µmol P/g) and no significant changes in detrital P (0.1 µmol P/g) and total P (12 µmol P/g). These temporal trends in P geochemistry suggest that (1) organic matter, the principal shuttle of P to the seafloor, is regenerated in sediments and releases associated P to interstitial waters, (2) P associated with iron-rich oxyhydroxides is released to interstitial waters upon microbial iron reduction, (3) the decrease in adsorbed P with age and depth probably indicates a similar decrease in interstitial water P concentrations, and (4) carbonate fluorapatite (CFA), or another authigenic P-bearing phase, precipitates due to the release of P from organic matter and iron oxyhydroxides and becomes an increasingly significant P sink with age and depth. The reorganization of P between various sedimentary pools, and its eventual incorporation in CFA, has been recognized in a variety of continental margin environments, but this is the first time these processes have been revealed in deep-sea sediments. Phosphorus accumulation rate data from this study and others indicates that the global pre-anthropogenic input rate of P to the ocean (20x10**10 mol P/yr) is about a factor of four times higher than previously thought, supporting recent suggestions that the residence time of P in the oceans may be as short as 10000-20000 years.