Alpine permafrost index map

The objective of this study is the production of an Alpine Permafrost Index Map (APIM) covering the entire European Alps. A unified statistical model that is based on Alpine-wide permafrost observations is used for debris and bedrock surfaces across the entire Alps. The explanatory variables of the model are mean annual air temperatures, potential incoming solar radiation and precipitation. Offset terms were applied to make model predictions for topographic and geomorphic conditions that differ from the terrain features used for model fitting. These offsets are based on literature review and involve some degree of subjective choice during model building. The assessment of the APIM is challenging because limited independent test data are available for comparison and these observations represent point information in a spatially highly variable topography. The APIM provides an index that describes the spatial distribution of permafrost and comes together with an interpretation key that helps to assess map uncertainties and to relate map contents to their actual expression in terrain. The map can be used as a first resource to estimate permafrost conditions at any given location in the European Alps in a variety of contexts such as research and spatial planning. Results show that Switzerland likely is the country with the largest permafrost area in the Alps, followed by Italy, Austria, France and Germany. Slovenia and Liechtenstein may have marginal permafrost areas. In all countries the permafrost area is expected to be larger than the glacier-covered area.

Gletscherstände des Vernagtferner 1889-1969

The Vernagtferner in the Ötztaler Alps (Tirol) has been mapped after terrestrial-photogrammetric surveying by Sebastian Finsterwalder in 1889, Otto von Gruber in 1912, and Heinrich Schatz in 1938. The new, four-colored map in the scale 1: 10.000 enclosed in this issue was composed from aerial photographs of 1969. It was conceived as topographicaI map with additional geodetic and glaciological content. The methods of survey are explained and the means of cartographic representation are discussed.

Reconstructed glaciation limits in Eurasia (digitized from map Fig.1)

Based on field investigations in northern Russia and interpretation of offshore seismic data, we have made a preliminary reconstruction of the maximum ice-sheet extent in the Barents and Kara Sea region during the Early/Middle Weichselian and the Late Weichselian. Our investigations indicate that the Barents and Kara ice sheets attained their maximum Weichselian positions in northern Russia prior to 50 000 yr BP, whereas the northeastern flank of the Scandinavian Ice Sheet advanced to a maximum position shortly after 17000 calendar years ago. During the Late Weichselian (25 000-10000 yr BP), much of the Russian Arctic remained ice-free. According to our reconstruction, the extent of the ice sheets in the Barents and Kara Sea region during the Late Weichselian glacial maximum was less than half that of the maximum model which, up to now, has been widely used as a boundary condition for testing and refining General Circulation Models (GCMs). Preliminary numerical-modelling experiments predict Late Weichselian ice sheets which are larger than the ice extent implied for the Kara Sea region from dated geological evidence, suggesting very low precipitation.

Mean dynamic topography and oceanographic parameters estimated from an inverse model and satellite geodesy, with link to model result in one single NetCDF file (392 MB), including the inverse data error covariance

Geostrophic surface velocities can be derived from the gradients of the mean dynamic topography-the difference between the mean sea surface and the geoid. Therefore, independently observed mean dynamic topography data are valuable input parameters and constraints for ocean circulation models. For a successful fit to observational dynamic topography data, not only the mean dynamic topography on the particular ocean model grid is required, but also information about its inverse covariance matrix. The calculation of the mean dynamic topography from satellite-based gravity field models and altimetric sea surface height measurements, however, is not straightforward. For this purpose, we previously developed an integrated approach to combining these two different observation groups in a consistent way without using the common filter approaches (Becker et al. in J Geodyn 59(60):99-110, 2012, doi:10.1016/j.jog.2011.07.0069; Becker in Konsistente Kombination von Schwerefeld, Altimetrie und hydrographischen Daten zur Modellierung der dynamischen Ozeantopographie, 2012, http://nbn-resolving.de/nbn:de:hbz:5n-29199). Within this combination method, the full spectral range of the observations is considered. Further, it allows the direct determination of the normal equations (i.e., the inverse of the error covariance matrix) of the mean dynamic topography on arbitrary grids, which is one of the requirements for ocean data assimilation. In this paper, we report progress through selection and improved processing of altimetric data sets. We focus on the preprocessing steps of along-track altimetry data from Jason-1 and Envisat to obtain a mean sea surface profile. During this procedure, a rigorous variance propagation is accomplished, so that, for the first time, the full covariance matrix of the mean sea surface is available. The combination of the mean profile and a combined GRACE/GOCE gravity field model yields a mean dynamic topography model for the North Atlantic Ocean that is characterized by a defined set of assumptions. We show that including the geodetically derived mean dynamic topography with the full error structure in a 3D stationary inverse ocean model improves modeled oceanographic features over previous estimates.

Global raster maps indicating the habitat suitability for 7 suborders of cold water octocorals (Octocorallia found deeper than 50m)

This dataset consists of global raster maps indicating the habitat suitability for 7 suborders of cold water octocorals (Octocorallia found deeper than 50m). Maps present a relative habitat suitability index ranging from 0 (unsuitable) to 100 (highly suitable). Two maps are provided for each suborder (Alcyoniina, Calcaxonia, Holaxonia, Scleraxonia, Sessiliflorae, Stolonifera, and Subselliflorae). A publicly accessable low resolution map (grid size 10x10 arc-minutes) and a restricted access high resolution map (grid size 30x30 arc-seconds). Maps are geotiff format incorporating LZW compression to reduce file size. Please contact the corresponding author (Chris Yesson) for access to the high resolution data.

Two historical maps from nineteenth-century Palestine, with links to digitized maps in shapefile format

Reconstructing past landscapes from historical maps requires quantifying the accuracy and completeness of these sources. The accuracy and completeness of two historical maps of the same period covering the same area in Israel were examined: the 1:63,360 British Palestine Exploration Fund map (1871-1877) and the 1:100,000 French Levés en Galilée (LG) map (1870). These maps cover the mountainous area of the Galilee (northern Israel), a region with significant natural and topographical diversity, and a long history of human presence. Land-cover features from both maps, as well as the contours drawn on the LG map, were digitized. The overall correspondence between land-cover features shown on both maps was 59% and we found that the geo-referencing method employed (transformation type and source of control points) did not significantly affect these correspondence measures. Both maps show that in the 1870s, 35% of the Galilee was covered by Mediterranean maquis, with less than 8% of the area used for permanent agricultural cropland (e.g., plantations). This article presents how the reliability of the maps was assessed by using two spatial historical sources, and how land-cover classes that were mapped with lower certainty and completeness are identified. Some of the causes that led to observed differences between the maps, including mapping scale, time of year, and the interests of the surveyors, are also identified.

Probability inundation map for a scenario combining storm surge and sea-level rise

Coastal managers require reliable spatial data on the extent and timing of potential coastal inundation, particularly in a changing climate. Most sea level rise (SLR) vulnerability assessments are undertaken using the easily implemented bathtub approach, where areas adjacent to the sea and below a given elevation are mapped using a deterministic line dividing potentially inundated from dry areas. This method only requires elevation data usually in the form of a digital elevation model (DEM). However, inherent errors in the DEM and spatial analysis of the bathtub model propagate into the inundation mapping. The aim of this study was to assess the impacts of spatially variable and spatially correlated elevation errors in high-spatial resolution DEMs for mapping coastal inundation. Elevation errors were best modelled using regression-kriging. This geostatistical model takes the spatial correlation in elevation errors into account, which has a significant impact on analyses that include spatial interactions, such as inundation modelling. The spatial variability of elevation errors was partially explained by land cover and terrain variables. Elevation errors were simulated using sequential Gaussian simulation, a Monte Carlo probabilistic approach. 1,000 error simulations were added to the original DEM and reclassified using a hydrologically correct bathtub method. The probability of inundation to a scenario combining a 1 in 100 year storm event over a 1 m SLR was calculated by counting the proportion of times from the 1,000 simulations that a location was inundated. This probabilistic approach can be used in a risk-aversive decision making process by planning for scenarios with different probabilities of occurrence. For example, results showed that when considering a 1% probability exceedance, the inundated area was approximately 11% larger than mapped using the deterministic bathtub approach. The probabilistic approach provides visually intuitive maps that convey uncertainties inherent to spatial data and analysis.

Geological map of Geltinger Birk, western Baltic Sea, Germany

The geological structure of a Holocene sand spit system and the adjacent Weichselian glacial deposits in the northeastern part of Schleswig-Holstein have been investigated and presented in a geological map. Thin meltwater deposits overlie the glacial tills in the area of the former Beverö lsland in the west. To its north and northeast, the modern Sand spit system is present. Its basal transgression horizon is composed mainly of gravels and boulders, and directly overlie the Pleistocene deposits. Further up the succession, fine graind sands are present, in turn overlain by the coarser grained sands of the barrier bar. To the east, under the protection of the sand spit, gyttyas and peats which sometimes attain large thicknesses have been deposited under lacustrinellagoonal conditions. Closer to the shore, these sediments are covered by marine sands.