Macrofauna biodiversity from ECO2 water-formation experiment

The injection of gas into sub-seabed aquifers may lead to the displacement of hypoxic and hypersaline fluids (reservoir formation water) major environmental risk. To investigate this risk, the impact of formation water release on the macrofaunal community in a mesocosm experiment at Solbergstrand was conducted. 20 boxcores were exposed to 4 treatments (high salinity, hypoxic, mixed and tidal) during two weeks. The abundance of macrofauna was quantified for each treatment and richness, eveness and biodiversity indices calculated. The data are reported in this dataset.

Sedimentology, geochemistry and ostracodes from Lake Ohrid

Ancient Lake Ohrid, located in the southern Balkan Peninsula in Macedonia and Albania is characterized by a high degree of endemism and it is considered to be the oldest lake in Europe. But its exact age (between one and ten million years) and also its origin are so far not known. To unravel these uncertainties an ICDP (International Continental Scientific Drilling Program) drilling project (Scientific Collaboration On Past Speciation Conditions in Ohrid (SCOPSCO)), started in April 2013. In addition to the investigations about the age and origin, other paleolimnological studies, e.g., the reconstruction of past climate and of past lake level changes, should be performed with the drilled cores. Used proxies in such paleolimnological studies are, e.g., ostracodes because they respond sensitively to environmental changes but an accurate knowledge of their preferences and tolerances to specific environmental conditions is necessary for this purpose. So far, this knowledge about the, mostly endemic, Ohrid ostracodes was limited. Thus, within the framework of this thesis, ostracodes and a multiplicity of environmental data were collected in Lake Ohrid and its adjacent waters during four field campaigns. In a total of 47 ostracode species could be detected in the entire study area and 32 of them were found alive in Lake Ohrid. Multivariate statistic identified that water depth, salinity, conductivity, pH, and dissolved oxygen were the main determining factors for ostracode distribution in the entire study area. In Lake Ohrid, the distribution was mainly controlled by water depth, water temperature, and pH. Some ostracodes were identified as strong indicator species for important environmental variables, e.g., water temperature and water depth. A distinctive feature of Lake Ohrid was the finding of the ostracode genus Amnicythere whose species normally inhabit oligo-(meso-)haline waters and this could point to a marine origin of the lake. So far, the specialized endemic ostracodes show the highest abundances and the greatest spatial distribution in Lake Ohrid but during the sampling eight widespread species were found for the first time in the lake. They inhabited mainly the northern part of the lake, where two cities are located and industry and agriculture play a major role, and they were limited to water depths above 50 m and this could be an evidence for an increasing anthropogenic pressure because widespread ostracode species often replace endemic species. To unravel the human impact on Lake Ohrid during the last decades short sediment cores were taken and the multi-proxy study indicated that the lake productivity between the early 1920s and the late 1980s was relatively low. Diatom assemblages indicate a rising productivity in the southern part of Lake Ohrid since the mid 1970s and geochemical proxies and ostracodes point to an increasing productivity since the late 1980s in the southern and in the northern part. A slight increase in the productivity continued until 2009. Noticeable is the fact that since the early 1990s, the increasing productivity and the increasing concentrations of heavy metals correspond to a decreasing number of ostracodes in the northern part of Lake Ohrid. Perhaps, this indicates that living conditions in this lake part became less favorable for the mostly endemic ostracode species. Furthermore, the sediment samples from the cores show relatively high concentrations of arsenic, iron, and nickel. Fluctuations in ostracode assemblages from three longer sediment cores, the longest spans approximately 136 ka, taken in Lake Ohrid, correspond to fluctuations in the productivity, in the carbonate content, of the lake level, and of climate changes. Between the marine isotope stage (MIS) 6 and MIS 2 the number of ostracode valves is very low or the valves were completely absent. This corresponds to a low lake productivity, a low carbonate content, and a low lake level. At the onset of the Holocene, the number of valves increased markedly and this correlates with an increased productivity and carbonate content and a warmer climate. But during the Little Ice Age (LIA), the number of valves dropped again and species which prefer warmer waters disappeared completely. This drop corresponds also to a low productivity. After the LIA, the number of species increased again but since 1895 AD a strong and abrupt decrease is visible. A reason for this could be an increase in the heavy metal concentrations.

Aboveground community and species-specific plant biomass from the Jena Experiment (Main Experiment, year 2004)

This data set contains aboveground community biomass (Sown plant community, Weed plant community, Dead plant material, and Unidentified plant material; all measured in biomass as dry weight) and species-specific biomass from the sown species of the main experiment plots of a large grassland biodiversity experiment (the Jena Experiment; see further details below). In the main experiment, 82 grassland plots of 20 x 20 m were established from a pool of 60 species belonging to four functional groups (grasses, legumes, tall and small herbs). In May 2002, varying numbers of plant species from this species pool were sown into the plots to create a gradient of plant species richness (1, 2, 4, 8, 16 and 60 species) and functional richness (1, 2, 3, 4 functional groups). Plots were maintained by bi-annual weeding and mowing. Aboveground community biomass was harvested twice in 2004 just prior to mowing (during peak standing biomass in late May and in late August) on all experimental plots of the main experiment. This was done by clipping the vegetation at 3 cm above ground in four rectangles of 0.2 x 0.5 m per large plot. The location of these rectangles was assigned prior to each harvest by random selection of coordinates within the core area of the plots (i.e. the central 10 x 15 m). The positions of the rectangles within plots were identical for all plots. The harvested biomass was sorted into categories: individual species for the sown plant species, weed plant species (species not sown at the particular plot), detached dead plant material (i.e., dead plant material in the data file), and remaining plant material that could not be assigned to any category (i.e., unidentified plant material in the data file). All biomass was dried to constant weight (70°C, >= 48 h) and weighed. Sown plant community biomass was calculated as the sum of the biomass of the individual sown species. The data for individual samples and the mean over samples for the biomass measures on the community level are given. Overall, analyses of the community biomass data have identified species richness as well as functional group composition as important drivers of a positive biodiversity-productivity relationship.

Mean cover and frequencies of vascular plant species during three decades around Abisko Scientific Research Station

Plant species distributions are expected to shift and diversity is expected to decline as a result of global climate change, particularly in the Arctic where climate warming is amplified. We have recorded the changes in richness and abundance of vascular plants at Abisko, sub-Arctic Sweden, by re-sampling five studies consisting of seven datasets; one in the mountain birch forest and six at open sites. The oldest study was initiated in 1977-1979 and the latest in 1992. Total species number increased at all sites except for the birch forest site where richness decreased. We found no general pattern in how composition of vascular plants has changed over time. Three species, Calamagrostis lapponica, Carex vaginata and Salix reticulata, showed an overall increase in cover/frequency, while two Equisetum taxa decreased. Instead, we showed that the magnitude and direction of changes in species richness and composition differ among sites.

Aboveground community and species-specific plant biomass from the Jena Experiment (Main Experiment, year 2007)

This data set contains aboveground community biomass (Sown plant community, Weed plant community, Dead plant material, and Unidentified plant material; all measured in biomass as dry weight) and species-specific biomass from the sown species of the main experiment plots of a large grassland biodiversity experiment (the Jena Experiment; see further details below). In the main experiment, 82 grassland plots of 20 x 20 m were established from a pool of 60 species belonging to four functional groups (grasses, legumes, tall and small herbs). In May 2002, varying numbers of plant species from this species pool were sown into the plots to create a gradient of plant species richness (1, 2, 4, 8, 16 and 60 species) and functional richness (1, 2, 3, 4 functional groups). Plots were maintained by bi-annual weeding and mowing. Aboveground community biomass was harvested twice in 2007 just prior to mowing (during peak standing biomass in early June and in late August) on all experimental plots of the main experiment. This was done by clipping the vegetation at 3 cm above ground in four (May) or three (August) rectangles of 0.2 x 0.5 m per large plot. The location of these rectangles was assigned prior to each harvest by random selection of coordinates within the core area of the plots (i.e. the central 10 x 15 m). The positions of the rectangles within plots were identical for all plots. The harvested biomass was sorted into categories: individual species for the sown plant species, weed plant species (species not sown at the particular plot), detached dead plant material (i.e., dead plant material in the data file), and remaining plant material that could not be assigned to any category (i.e., unidentified plant material in the data file). All biomass was dried to constant weight (70°C, >= 48 h) and weighed. Sown plant community biomass was calculated as the sum of the biomass of the individual sown species. The data for individual samples and the mean over samples for the biomass measures on the community level are given. Overall, analyses of the community biomass data have identified species richness as well as functional group composition as important drivers of a positive biodiversity-productivity relationship.

Aboveground community and species-specific plant biomass from the Jena Experiment (Main Experiment, year 2006)

This data set contains aboveground community biomass (Sown plant community, Weed plant community, Dead plant material, and Unidentified plant material; all measured in biomass as dry weight) and species-specific biomass from the sown species of the main experiment plots of a large grassland biodiversity experiment (the Jena Experiment; see further details below). In the main experiment, 82 grassland plots of 20 x 20 m were established from a pool of 60 species belonging to four functional groups (grasses, legumes, tall and small herbs). In May 2002, varying numbers of plant species from this species pool were sown into the plots to create a gradient of plant species richness (1, 2, 4, 8, 16 and 60 species) and functional richness (1, 2, 3, 4 functional groups). Plots were maintained by bi-annual weeding and mowing. Aboveground community biomass was harvested twice in 2006 just prior to mowing (during peak standing biomass in early June and in late August) on all experimental plots of the main experiment. This was done by clipping the vegetation at 3 cm above ground in four rectangles of 0.2 x 0.5 m per large plot. The location of these rectangles was assigned prior to each harvest by random selection of coordinates within the core area of the plots (i.e. the central 10 x 15 m). The positions of the rectangles within plots were identical for all plots. The harvested biomass was sorted into categories: individual species for the sown plant species, weed plant species (species not sown at the particular plot), detached dead plant material (i.e., dead plant material in the data file), and remaining plant material that could not be assigned to any category (i.e., unidentified plant material in the data file). All biomass was dried to constant weight (70°C, >= 48 h) and weighed. Sown plant community biomass was calculated as the sum of the biomass of the individual sown species. The data for individual samples and the mean over samples for the biomass measures on the community level are given. Overall, analyses of the community biomass data have identified species richness as well as functional group composition as important drivers of a positive biodiversity-productivity relationship.

Distribution models for mountain plant species: The value of elevation

The climatic conditions of mountain habitats are greatly influenced by topography. Large differences in microclimate occur with small changes in elevation, and this complex interaction is an important determinant of mountain plant distributions. In spite of this, elevation is not often considered as a relevant predictor in species distribution models (SDMs) for mountain plants. Here, we evaluated the importance of including elevation as a predictor in SDMs for mountain plant species. We generated two sets of SDMs for each of 73 plant species that occur in the Pacific Northwest of North America; one set of models included elevation as a predictor variable and the other set did not. AUC scores indicated that omitting elevation as a predictor resulted in a negligible reduction of model performance. However, further analysis revealed that the omission of elevation resulted in large over-predictions of species' niche breadths-this effect was most pronounced for species that occupy the highest elevations. In addition, the inclusion of elevation as a predictor constrained the effects of other predictors that superficially affected the outcome of the models generated without elevation. Our results demonstrate that the inclusion of elevation as a predictor variable improves the quality of SDMs for high-elevation plant species. Because of the negligible AUC score penalty for over-predicting niche breadth, our results support the notion that AUC scores alone should not be used as a measure of model quality. More generally, our results illustrate the importance of selecting biologically relevant predictor variables when constructing SDMs.

Aboveground community and species-specific plant biomass from the Jena Experiment (Main Experiment, year 2003)

This data set contains aboveground community biomass (Sown plant community, Weed plant community, Dead plant material, and Unidentified plant material; all measured in biomass as dry weight) and species-specific biomass from the sown species of the main experiment plots of a large grassland biodiversity experiment (the Jena Experiment; see further details below). In the main experiment, 82 grassland plots of 20 x 20 m were established from a pool of 60 species belonging to four functional groups (grasses, legumes, tall and small herbs). In May 2002, varying numbers of plant species from this species pool were sown into the plots to create a gradient of plant species richness (1, 2, 4, 8, 16 and 60 species) and functional richness (1, 2, 3, 4 functional groups). Plots were maintained by bi-annual weeding and mowing. Aboveground community biomass was harvested twice in 2003 just prior to mowing (during peak standing biomass in late May and in late August) on all experimental plots of the main experiment. This was done by clipping the vegetation at 3 cm above ground in four rectangles of 0.2 x 0.5 m per large plot. The location of these rectangles was assigned prior to each harvest by random selection of coordinates within the core area of the plots (i.e. the central 10 x 15 m). The positions of the rectangles within plots were identical for all plots. The harvested biomass was sorted into categories: individual species for the sown plant species, weed plant species (species not sown at the particular plot), detached dead plant material (i.e., dead plant material in the data file), and remaining plant material that could not be assigned to any category (i.e., unidentified plant material in the data file). All biomass was dried to constant weight (70°C, >= 48 h) and weighed. Sown plant community biomass was calculated as the sum of the biomass of the individual sown species. The data for individual samples and the mean over samples for the biomass measures on the community level are given. Overall, analyses of the community biomass data have identified species richness as well as functional group composition as important drivers of a positive biodiversity-productivity relationship.

List of plant species found on Victoria Island

While engaged in geoecological field work on Victoria Island, 277 new plants could be recorded for the vicinities of Holman, Cambridge Bay, Wellington Bay, Mt. Pelly, Richardson Islands, Hadley Bay, and Minto lnlet; 8 of them were new for Victoria Island, 6 for the western Canadian arctic archipelago.

Spatial database of canopy plant densities created from satellite images over Galapagos in 2011, with intent to manage invasive species

Mapping is an important tool for the management of plant invasions. If landscapes are mapped in an appropriate way, results can help managers decide when and where to prioritize their efforts. We mapped vegetation with the aim of providing key information for managers on the extent, density and rates of spread of multiple invasive species across the landscape. Our case study focused on an area of Galapagos National Park that is faced with the challenge of managing multiple plant invasions. We used satellite imagery to produce a spatially-explicit database of plant species densities in the canopy, finding that 92% of the humid highlands had some degree of invasion and 41% of the canopy was comprised of invasive plants. We also calculated the rate of spread of eight invasive species using known introduction dates, finding that species with the most limited dispersal ability had the slowest spread rates while those able to disperse long distances had a range of spread rates. Our results on spread rate fall at the lower end of the range of published spread rates of invasive plants. This is probably because most studies are based on the entire geographic extent, whereas our estimates took plant density into account. A spatial database of plant species densities, such as the one developed in our case study, can be used by managers to decide where to apply management actions and thereby help curtail the spread of current plant invasions. For example, it can be used to identify sites containing several invasive plant species, to find the density of a particular species across the landscape or to locate where native species make up the majority of the canopy. Similar databases could be developed elsewhere to help inform the management of multiple plant invasions over the landscape.

Aboveground community and species-specific plant biomass from the Jena Experiment (Dominance Experiment, year 2006)

This data set contains aboveground community plant biomass (Sown plant community, Weed plant community, Dead plant material, and Unidentified plant material; all measured in biomass as dry weight) and species-specific biomass from the sown species of the dominance experiment plots of a large grassland biodiversity experiment (the Jena Experiment; see further details below). In the dominance experiment, 206 grassland plots of 3.5 x 3.5 m were established from a pool of 9 plant species that can be dominant in semi-natural grassland communities of the study region. In May 2002, varying numbers of plant species from this species pool were sown into the plots to create a gradient of plant species richness (1, 2, 3, 4, 6, and 9 species). Plots were maintained by bi-annual weeding and mowing. Aboveground community biomass was harvested twice in May and August 2006 on all experimental plots of the dominance experiment. This was done by clipping the vegetation at 3 cm above ground in two rectangles of 0.2 x 0.5 m per experimental plot. The location of these rectangles was assigned by random selection of coordinates within the central area of the plots (excluding an outer edge of 50cm). The positions of the rectangles within plots were identical for all plots. The harvested biomass was sorted into categories: individual species for the sown plant species, weed plant species (species not sown at the particular plot), detached dead plant material, and remaining plant material that could not be assigned to any category. All biomass was dried to constant weight (70°C, >= 48 h) and weighed. Sown plant community biomass was calculated as the sum of the biomass of the individual sown species. The mean of both samples per plot and the individual measurements are provided in the data file. Overall, analyses of the community biomass data have identified species richness and the presence of particular species as an important driver of a positive biodiversity-productivity relationship.