(Table 1) Sea level during storm surges at various sites along the german Baltic Sea coast

A seawall was constructed in 1897 along the steep coast of Streckelsberg, Usedom Island to stop the cliff retreat. It was destroyed several times by storm induced sea floods, reconstructed and gradually extended to a length of 450 m. After the severe storm event of 1/2.3.1949, no more repair work was implemented. The ruins were no longer capable of preventing further erosion of the Streckelsberg cliff. A new protective structure became a necessity against ongoing erosion, and to check the lowering of the abrasion platform. The construction of three breakwaters began in 1995. A severe storm occurred on 3/4.11.1995 before their completion. Coastal bottom sediment mapping using a sidescan-sonar carried out two days later showed that a channel system down to a depth of 1.5 m was cut into the sand layer covering the sea floor on both sides of the Koserow Bank. The bottom of these channels was paved with gravel and boulders. This layer was encountered in the whole surveyed area below a mobile sand layer. Discharged bodies of fine sand half a meter high and erosional cavities several m2 in diameter around boulders led to the conclusion that an intensive sediment movement down to a depth of 11 m had taken place during the storm. A storm related direction of sediment discharge could not be identified. The existing section of the breakwaters withstood the severe storm.

European lobsters (Homarus gammarus) captured around the rocky island of Helgoland (German Bight, North Sea) from 2005 to 2015 - A mark-recapture program -

European lobsters were captured by employees of the Marine Biological Station and local fishermen from the rocky subtidal zone around the island of Helgoland (North Sea, 54°11.3'N, 7°54.0'E) and from the Helgoland Deep Trench, located south west of the island. The animals were captured by pots, traps, trawl and divers. All measured lobsters were tagged and released. A tagged lobster was classified by the absence or presence of colour tag and/or T-bar tag. Data of lobsters contains capture date, fresh weight, carapace lengths, sex and the information if lobsters were egg-bearing and tagged. Furthermore, data of commercial landed lobsters are included.

Results of the sorting of the mikronekton and zooplankton material sampled by the German Antarctic Expedition 1975/1976

A description is given of the taxa sorted out of the zooplanktion and mikronekton material of the 1st German Antarctic Expedition 1975/76 by the Kiel sorting center. The methods employed in the sorting center are describined in detail. Notes for further use of the material are also given.

Box Corer (engineering detail drawing of the large version)

The Box corer is a marine geological and biological sampling tool for soft sediments in lakes or oceans. It is deployed from a research vessel with a deep sea wire and suitable for any water depth. It is designed for a minimum of disturbance of the sediment surface by bow wave effects which is important for quantitative investigations of the benthos micro- to macrofauna, geochemical processes, sampling of bottom water or sedimentology. The large box corer version with an area of 2,500 cm? is frequently used on research vessels since the 1980th years. This data set is a publication of the engeneering drawings.