Late Cenozoic silicoflagellate biostratigraphy, relative paleotemperature, and distribution of various genera and morphologic subgroups with remarks on noteworthy occurrences at DSDP Leg 86 Holes

A quantitative study of late Cenozoic silicoflagellates from the northwestern Pacific sites of Deep Sea Drilling Project Leg 86 shows a relative paleotemperature (Ts) gradient with lowest values (Ts = 30) in the north. Some new ecostratigraphic relations for the region are indicated, such as the last common occurrence of Dictyocha brevispina at 2.6 - 3.0 m.y. ago during a cool interval. Elements of North Pacific and low-latitude biostratigraphic zonations can be identified, but the mixing of cool- and warm-indicator taxa prompted the definition of the new Miocene Mesocena hexalitha Subzone and Pliocene Distephanus jimlingii Subzone. Scanning-electron microscope study of Leg 86 silicoflagellates was done to determine whether various types of skeletal surface texture are temperature dependent. To conduct the study we organized a new surface-texture descriptive code, which characterizes the apical structure/basal ring/spine sequence using new definitions of the terms crenulate (C), linear (L), nodular (N), reticulate (R), and smooth (S). One new silicoflagellate genus, Caryocha Bukry et Monechi, n. gen., is described and several new combinations are made.

Major ion concentrations and chlorine isotope composition of water-soluble chloride and structurally bound chloride in DSDP/ODP serpentinized ultramafic rocks

Eight DSDP/ODP cores were analyzed for major ion concentrations and d37Cl values of water-soluble chloride (d37Clwsc) and structurally bound chloride (d37Clsbc) in serpentinized ultramafic rocks. This diverse set of cores spans a wide range in age, temperature of serpentinization, tectonic setting, and geographic location of drilled serpentinized oceanic crust. Three of the cores were sampled at closely spaced intervals to investigate downhole variation in Cl concentration and chlorine isotope composition. The average total Cl content of all 86 samples is 0.26±0.16 wt.% (0.19±0.10 wt.% as water-soluble Cl (Xwsc) and 0.09±0.09 wt.% as structurally bound Cl (Xsbc)). Structurally bound Cl concentration nearly doubles with depth in all cores; there is no consistent trend in water-soluble Cl content among the cores. Chlorine isotope fractionation between the structurally bound Cl**- site and the water-soluble Cl**- site varies from -1.08? to +1.16?, averaging to +0.21?. Samples with negative fractionations may be related to reequilibration of the water-soluble chloride with seawater post-serpentinite formation. Six of the cores have positive bulk d37Cl values (+0.05? to +0.36?); the other two cores (173-1068A (Leg-Hole) and 84-570) have negative bulk d37Cl values (-1.26? and -0.54?). The cores with negative d37Cl values also have variable Cl**-/SO4**2- ratios, in contrast to all other cores. The isotopically positive cores (153-920D and 147-895E) show no isotopic variation with depth; the isotopically negative core (173-1068A) decreases by ~1? with depth for both the water-soluble and structurally bound Cl fractions. Non-zero bulk d37Cl values indicate Cl in serpentinites was incorporated during original hydration and is not an artifact of seawater infiltration during drilling. Cores with positive d37Cl values are most likely explained by open system fractionation during hydrothermal alteration, with preferential incorporation of 37Cl from seawater into the serpentinite and loss of residual light Cl back to the ocean. Fluid / rock ratios were probably low as evidenced by the presence of water-soluble salts. The two isotopically negative cores are characterized by a thick overlying sedimentary package that was in place prior to serpentinization. We believe the low d37Cl values of these cores are a result of hydration of ultramafic rock by infiltrating aqueous pore fluids from the overlying sediments. The resulting serpentinites inherit the characteristic negative d37Cl values of the pore waters. Chlorine stable isotopes can be used to identify the source of the serpentinizing fluid and ultimately discern chemical and tectonic processes involved in serpentinization.

The 2008 DGFI Realization of the ITRS: DTRF2008 (data)

The DTRF2008 is a realization of the International Terrestrial Reference System ITRS. The DTRF2008 consists of station positions and velocities of global distributed observing stations of the space geodetic observation techniques VLBI, SLR, GPS and DORIS. The DTRF2008 was released in May 2010 and includes the observation data of the techniques up to and including 2008. The observation data are processed and submitted by the corresponding international services: IGS (International GNSS Service, http://igscb.jpl.nasa.gov) IVS (International VLBI Service, http://ivscc.gsfc.nasa.gov) ILRS (International Laser Ranging Service, http://ilrs.gsfc.nasa.gov) IDS (International DORIS Service, http://ids-doris.org). The DTRF2008 is an independent ITRS realization, which is computed on the basis of the same input data as the ITRF2008 (IGN, Paris). Both realizations differ with respect to their computation strategies: while the ITRF2008 is based on the combination of solutions, the DTRF2008 is computed by the combination of normal equations. The DTRF2008 comprises the coordinates of 559 GPS-, 106 VLBI-, 122 SLR- and 132 DORIS-stations. The reference epoch is 1.1.2005, 0h UTC. The Earth Orientation Parameters (EOP) - that means the coordinates of the terrestrial and the celestial pole, UT1-UTC and the Length of Day (LOD) - were simultaneously estimated with the station coordinates. The EOP time series cover the period of 1983 to 2008. The station names are the official IERS indications: cdp numbers or 4-character IDs and DOMES numbers (http://itrf.ensg.ign.fr/doc_ITRF/iers_sta_list.txt). The solution is available in different file formats (SINEX and SSC), see below. A detailed description of the solution is given by Seitz M. et al. (2012). The results of a comparison of DTRF2008 and ITRF2008 is given by Seitz M. et al. (2013). More information as well as residual time series of the station positions can be made available by request.

Abundance of benthic foraminifera in late Paleocene to eraly Pliocene sediments of DSDP Hole 74-525A on the Walvis Ridge, South Atlantic (Table 1)

Benthic forammifers in the size-fraction greater than 0.073 mm were studied in 88 Paleocene to Pleistocene samples from Deep Sea Drilling Project Site 525 (Hole 525A, Walvis Ridge, eastern south Atlantic). Clustering of the samples on the basis of the 86 most abundant foramimfers (in total, 331 taxa were identified) allowed separating two major assemblage zones: the Paleocene to Eocene interval, and the Oligocene to Pleistocene interval. Each of these, in turn, were subdivided into three minor subzones as follows: lower upper Paleocene (approx. 62.4 to 57 8 Ma); upper upper Paleocene (56.6 to 56 2 Ma), lower and middle Eocene (55.3 to 46 8 Ma); upper Oligocene to middle Miocene (25.3 to 16 Ma), middle Miocene to Pliocene (15.7 to 4.2 Ma), and lower Pleistocene (0.4 to 0.02 Ma), with only minor differences with the previous zone. Some very abundant taxa span most of the column studies (Bolivina huneri, Cassidulina subglobosa, Eponides bradyi, E. weddellensis, Gavelinella micra, Oridorsalis umbonatus, etc.). Several of the faunal breaks recorded coincide with conspicuous minima in the specific diversity curve, thus suggesting that the corresponding turnovers signal the final stages of periods of faunal impoverishment. At least one major bottomwater temperature drop (as derived from delta18O data) is synchronous with a decrease in the forammiferal specific diversity. On the other hand, a specific diversity maximum in the middle Miocene might be associated with a delta13C increase at approx 16 to 12 Ma. Highest foraminiferal abundances (up to 600-800 individuals per gram of dry sediment) occurred in the late Paleocene and in the early Pleistocene, in coincidence with the lowest diversity figures calculated. The magnitude of the most important faunal turnover recorded, between the middle Eocene and the late Oligocene, is magnified in our data set by the large hiatus which separates the middle Eocene from the upper Oligocene sediments. Considerably smaller overturns occurred within the late Paleocene (in coincidence with changes in the specific diversity, absolute abundance of forammiferal tests, and delta13C), and in the middle Miocene (in coincidence with a specific diversity maximum and a delta13C excursion). New reformation on the morphology and the stratigraphic ranges of several species is furnished. For all the taxa recorded the number of occurrences, total number of individuals identified and first and last appearances are listed.

(Table 1) 10 Beryllium and CaCO3 at DSDP Holes 86-576B, 86-576, and 86-578

Extension of the 10Be geochronology for deep-sea sediments beyond the limit of late Pliocene age found in published works has been attempted. The results obtained on sediments from Deep Sea Drilling Project (DSDP) Sites 576 and 578 of Leg 86 suggest the feasibility of dating sediments as old as 12 to 15 m.y. At both sites, there have been large changes in sedimentation rate, with the Pleistocene sediments accumulating several times faster than those of the Pliocene, which in turn were deposited several times more rapidly than the late Miocene sediments. The Pleistocene-Pliocene section is considerably thicker in Hole 578 than in Hole 576B: the respective depths for the 7 m.y. time boundary in the two holes are about 125 and about 25 m. These 10Be-based age estimates are in agreement with the paleomagnetic stratigraphies established for the two sites. The suggested enhancement in the oceanic deposition of 10Be before 7 to 9 m.y. ago, as noticed in manganese crusts, has found tentative support from the present sedimentary records. A preliminary search for 10Be production variation during a geomagnetic field reversal has been conducted. In Hole 578, an enhanced 10Be concentration is found in a sample close to the Brunhes/Matuyama reversal boundary. More detailed and systematic measurements are required to confirm this observation, which bears on the detailed behavior of the geomagnetic field during the reversal.

(Table T1) Trace element concentration and isotopic composition of pore waters from ODP Leg 168 sites

Pore water was collected from each of 10 sites during Ocean Drilling Program (ODP) Leg 168 on the eastern flank of the Juan de Fuca Ridge. These ten sites delineate a transect perpendicular to the present ridge axis and span a crustal age of 0.86-3.59 Ma. At nine of the ten sites the entire sediment section, which ranged from 41.3 to 613.8 m thick, was cored and attempts were made to recover at least one whole round of sediment per section of core for extraction of pore water. Several (2-5) whole-round sediment samples were taken from the uppermost and lowermost cores to constrain the chemical gradient near the sediment/water and sediment/basalt interfaces, respectively. Pore water was extracted from whole-round sediment core sections by squeezing only the most pristine sediment in a titanium squeezer designed by Manheim and Sayles (1974). Two additional water samples were collected in situ using the water-sampler temperature probe (WSTP; Barnes, 1988, doi:10.2973/odp.proc.ir.110.104.1988). Both of these samples were collected in the cased section of the open borehole from ODP Hole 1026B. Formation fluids were flowing up the cased hole into the overlying deep seawater (Fisher et al., 1997, doi:10.1029/97GL01286). Detailed descriptions of the sampling methods that were used to collect fluids are given by the Shipboard Scientific Party (Davis, Fisher, Firth, et al., 1997, doi:10.2973/odp.proc.ir.168.1997).

(Table 1) Sediment temperature and thermal conductivity at DSDP Leg 86 Holes

Using a new temperature recording instrument recently developed at the Woods Hole Oceanographic Institution, downhole temperature measurements were made at five sites during Deep Sea Drilling Project Leg 86. The instrument, which can be installed in the shoe of the hydraulic piston corer, allows measurements of sediment temperature to be made simultaneously with the collection of sediment cores. A numerical procedure was applied to correct the temperature disturbance caused by the corer's friction with the sediment. Detailed temperature profiles constructed from the data were combined with the measurement of thermal conductivity to calculate heat flow. Heat flow values were generally low at all sites of Leg 86, consistent with the age of the lithosphere (>100 m.y.) in the Northwestern Pacific Basin.

Table 1 Core site, fractional abundance of individual isoprenoid GDGTs and TEX86 values

TEXL86 and TEXH86 are organic palaeothermometers based on the lipids of Group 1 Crenarchaeota, recently proposed as a modified version of the original TEX86 index, but with significantly improved geographical coverage. Since few data from the global core top calibration are from the Pacific, this study was carried out to assess whether the global core top calibration is regionally biased or not. The result of principal components analysis of the fractional abundance of GDGTs, an analysis of variance (ANOVA) and the comparison of the residuals of TEXH 86 derived sea surface temperature (SST) estimates of the Pacific subset with that of the global data set suggest that the Pacific subset has a similar TEXH 86-SST relationship with the global data set. However, the regression line through the Pacific data and an ANOVA on the residuals of TEXL 86 derived SST estimates suggest otherwise. The contradictory findings are likely to stem from the large scatter in the Pacific TEXL 86 values in the mid temperature range. While regionality does not seem to exert a strong bias on TEXL 86 and TEXH 86 calibration, it appears that there is a strong need to resolve the large scatter in the global data set, especially in the mid and high latitudes, in order to improve the calibration for a better SST estimation.

Trace element composition of IODP Site 304-U1309 and 305-U1309 (Table A2)

IODP Site U1309 was drilled at Atlantis Massif, an oceanic core complex, at 30°N on the Mid-Atlantic Ridge (MAR). We present the results of a bulk rock geochemical study (major and trace elements) carried out on 228 samples representative of the different lithologies sampled at this location. Over 96% of Hole U1309D is made up of gabbroic rocks. Diabases and basalts cross-cut the upper part of the section; they have depleted MORB compositions similar to basalts sampled at MAR 30°N. Relics of mantle were recovered at shallow depth. Mantle peridotites show petrographic and geochemical evidence of extensive melt-rock interactions. Gabbroic rocks comprise: olivine-rich troctolites (> 70% modal olivine) and troctolites having high Mg# (82-89), high Ni (up to 2300 ppm) and depleted trace element compositions (Yb 0.06-0.8 ppm); olivine gabbros and gabbros (including gabbronorites) with Mg# of 60-86 and low trace element contents (Yb 0.125-2.5 ppm); and oxide gabbros and leucocratic dykes with low Mg# (< 50), low Ni (~65 ppm) and high trace element contents (Yb up to 26 ppm). Troctolites and gabbros are amongst the most primitive and depleted oceanic gabbroic rocks. The main geochemical characteristics of Site U1309 gabbroic rocks are consistent with a formation as a cumulate sequence after a common parental MORB melt, although (lack of systematic) downhole variations indicate that the gabbroic series were built by multiple magma injections. In detail, textural and geochemical variations in olivine-rich troctolites and gabbronorites suggest chemical interaction (assimilation?) between the parental melt and the intruded lithosphere. Site U1309 gabbroic rocks do not represent the complementary magmatic product of 30°N volcanics, although they sample the same mantle source. The bulk trace element composition of Site U1309 gabbroic rocks is similar to primitive MORB melt compositions; this implies that there was no large scale removal of melts from this gabbro section. The occurrence of such a large magmatic sequence implies that a high magmatic activity is associated with the formation of Atlantis Massif. Our results suggest that almost all melts feeding this magmatic system stays trapped into the intruded lithosphere.