Sedimentology, organic geochemistry, and stable isotopes of core PS2138-1

We studied variations in terrigenous (TOM) and marine organic matter (MOM) input in a sediment core on the northern Barents Sea margin over the last 30 ka. Using a multiproxy approach, we reconstructed processes controlling organic carbon deposition and investigated their paleoceanographic significance in the North Atlantic-Arctic Gateways. Variations in paleo-surface-water productivity are not documented in amount and composition of organic carbon. The highest level of MOM was deposited during 25-23 ka as a result of scavenging on fine-grained, reworked, and TOM-rich material released by the retreating Svalbard/Barents Sea ice sheet during the late Weichselian. A second peak of MOM is preserved because of sorptive protection by detrital and terrigenous organic matter, higher surface-water productivity due to permanent intrusion of Atlantic water, and high suspension load release by melting sea ice during 15.9-11.2 ka.

Porewater and particulate geochemistry during Maria S. Merian cruise MSM17/4

We present sedimentary geochemical data and in situ benthic flux measurements of dissolved inorganic nitrogen (DIN: NO3-, NO2-, NH4+) and oxygen (O2) from 7 sites with variable sand content along 18°N offshore Mauritania (NW Africa). Bottom water O2 concentrations at the shallowest station were hypoxic (42 µM) and increased to 125 µM at the deepest site (1113 m). Total oxygen uptake rates were highest on the shelf (-10.3 mmol O2 /m2 d) and decreased quasi-exponentially with water depth to -3.2 mmol O2 /m2 d. Average denitrification rates estimated from a flux balance decreased with water depth from 2.2 to 0.2 mmol N /m2 d. Overall, the sediments acted as net sink for DIN. Observed increases in delta 15NNO3 and delta 18ONO3 in the benthic chamber deployed on the shelf, characterized by muddy sand, were used to calculate apparent benthic nitrate fractionation factors of 8.0 pro mille (15epsilon app) and 14.1 pro mille (18epsilon app). Measurements of delta 15NNO2 further demonstrated that the sediments acted as a source of 15N depleted NO2-. These observations were analyzed using an isotope box model that considered denitrification and nitrification of NH4+ and NO2-. The principal findings were that (i) net benthic 14N/15N fractionation (epsilon DEN) was 12.9 ± 1.7pro mille, (ii) inverse fractionation during nitrite oxidation leads to an efflux of isotopically light NO2- (-22 ± 1.9 pro mille), and (iii) direct coupling between nitrification and denitrification in the sediment is negligible. Previously reported epsilon DEN for fine-grained sediments are much lower (4-8 pro mille). We speculate that high benthic nitrate fractionation is driven by a combination of enhanced porewater-seawater exchange in permeable sediments and the hypoxic, high productivity environment. Although not without uncertainties, the results presented could have important implications for understanding the current state of the marine N cycle.

(Tab. XIII.1) TOC content, carbonate content, carbonate mineralogy, percentage of total carbonate, aragonite, low magnesium calcium, and high magnesium calcium, and grain-size contents from samples from the Golfe d'Arguin and from the Western Sahara

Modern carbonate sedimentation takes place on the northern Mauritanian shelf (20°N), where typical tropical components (e.g. hermatypic reefs, calcareous green algae) are absent. Such deposits are reminiscent of extratropical sediment in the geological record. The tropical open shelf of Mauritania is influenced by large siliciclastic dust input and upwelling, highly fertilizing the ocean, as well as strongly limiting the light penetration. In this context, temperature does not appear to be the steering factor of carbonate production. This thesis describes the depositional system of the Golfe d'Arguin off Mauritania and focuses on environmental conditions that control the depositional pattern, in particular carbonate production. The description of this modern analogue provides a tool for paleoenvironmental interpretation of ancient counterparts. The Golfe d'Arguin is a broad shallow shelf comprising extensive shoals (<10 m water depth; i.e. the Banc d'Arguin) on the inner shelf where waters warm up. The sediments collected in water depths between 4 and 600 m are characterized by mixed carbonate and siliciclastic (dust) deposits. They vary from clean coarse-grained, almost pure carbonate loose sediments to siliciclastic-dominated fine-grained sediments. The carbonate content and sediment grain size show a north-south decreasing pattern through the Golfe d'Arguin and are controlled by the hydraulic regime influenced by wind-driven surface currents, swell, and tidal currents. The carbonate grain association is heterozoan. Components include abundant molluscs, foraminifers, and worm tubes, as well as barnacles and echinoderms, elements that are also abundant in extratropical sediments. The spatial distribution of the sedimentary facies of the Golfe d'Arguin does not display a depth zonation but rather a mosaic (i.e. patchy distribution). The depth and climatic signatures of the different sedimentary facies are determined by taxonomic and ecological investigations of the carbonate-secreting biota (molluscs and foraminifers). While certain planktonic foraminifers and molluscs represent upwelling elements, other components (e.g. mollusc and benthic foraminifer taxa) demonstrate the tropical origin of the sediment. The nutrient-rich (and thus also low light-penetration) conditions are reflected in the fact that symbiotic and photosynthetic carbonate-producing organisms (e.g. hermatypic corals) are absent. The Mauritanian deposits represent an environment that is rare in the modern world but might have been more common in the geological past when global temperatures were higher. Taxonomic and ecological studies allow for distinguishing carbonate sediments formed under either tropical high-nutrient or extratropical conditions, thus improving paleoclimate reconstruction.

Radiocarbon dates, grain size measurements and selected foraminifera analysis from sediment cores AvH248260-2 and AvH248260-1, Ameralik Fjord, SW Greenland

Sedimentological and geochemical (XRF) data together with information from diatom and benthic foraminiferal records of a 3.5 m long gravity core from Ameralik Fjord, southern West Greenland, is used for reconstructing late-Holocene environmental changes in this area. The changes are linked to large-scale North Atlantic ocean and climate variability. AMS 14C-dating of benthic foraminifera indicates that the sediment core records the last 4400 years and covers the termination of the Holocene Thermal Maximum (HTM). The late HTM (4.4 3.2 ka BP) is characterized by high accumulation rates of fine (silty) sediments related to strong meltwater discharge from the Inland Ice. The HTM benthic foraminiferal fauna demonstrates the presence of well-ventilated, saline bottom water originating from inflow of subsurface West Greenland Current water of Atlantic (Irminger Sea) origin. The hydrographic conditions were further characterized by limited sea ice probably related to a mild and relatively windy winter climate. After 3.2 ka BP lower fine-grained sedimentation rates, but a larger input from sea-ice rafted or aeolian coarse material prevailed. This can be related to colder atmospheric conditions with a decreased meltwater discharge and more widespread sea-ice cover in the fjord.

Geochemistry of organic carbon at DSDP Sites 75-530 and 75-532

CHN analyses of sediments and rocks sampled during DSDP Leg 75 in the South Atlantic have provided concentrations of organic carbon and atomic C/N ratios of organic matter from two sites. High values of organic carbon were measured in sediments deposited during Neogene and Cretaceous times at Site 530 in the Angola Basin; sediments deposited at other times contain less than 0.5% organic carbon. Development of the Benguela Current and associated upwelling-supported biological productivity is recorded in late Miocene to Holocene sediments which contain 1 to 7% organic carbon. These sediments include debris flows and turbidites composed of predominantly biogenic materials originally deposited on the Walvis Ridge and on the African continental margin. Organic-carbon-rich black shales containing up to 17% organic carbon occur in late Albian to Coniacian turbidite sequences. These Cretaceous black shale layers are commonly several centimeters thick and are separated by bioturbated fine-grained organic-carbon-poor turbidites which are usually much thicker. At Site 532 on the Walvis Ridge, biogenic sediments deposited between late Miocene and Holocene times contain 1 to 9% organic carbon. Fluctuations in the intensity of high biological productivity associated with the Benguela Current are preserved in alternating light and dark layers of sediments. C/N ratios of organic matter in sediments from both sites are typical of marine sources

Mass fluxes and organic carbon fluxes at four stations off Cape Blanc, NW Africa (Mauritania)

Vertical carbon fluxes between the surface and 2500 m depth were estimated from in situ profiles of particle size distributions and abundances me/asured off Cape Blanc (Mauritania) related to deep ocean sediment traps. Vertical mass fluxes off Cape Blanc were significantly higher than recent global estimates in the open ocean. The aggregates off Cape Blanc contained high amounts of ballast material due to the presence of coccoliths and fine-grained dust from the Sahara desert, leading to a dominance of small and fast-settling aggregates. The largest changes in vertical fluxes were observed in the surface waters (<250 m), and, thus, showing this site to be the most important zone for aggregate formation and degradation. The degradation length scale (L), i.e. the fractional degradation of aggregates per meter settled, was estimated from vertical fluxes derived from the particle size distribution through the water column. This was compared with fractional remineralization rate of aggregates per meter settled derived from direct ship-board measurements of sinking velocity and small-scale O2 fluxes to aggregates measured by micro-sensors. Microbial respiration by attached bacteria alone could not explain the degradation of organic matter in the upper ocean. Instead, flux feeding from zooplankton organisms was indicated as the dominant degradation process of aggregated carbon in the surface ocean. Below the surface ocean, microbes became more important for the degradation as zooplankton was rare at these depths.

(Table T3) Vitrinite reflection of samples obtained from ODP Leg 180 sites

Seventy-one samples from Ocean Drilling Program Leg 180 sites were analyzed for vitrinite reflectance and organic type. The objective was to define maximum paleotemperatures across the western Woodlark Basin as a function of depth. The organic matter is of early Pliocene to Holocene age and was recovered from drilled depths of 4.5 to 851.3 meters below seafloor. Organic matter is generally restricted to woody fragments within the sediment, although in a number of fine-grained samples, organic matter is dispersed throughout the sample. Virtually all samples contain vitrinite, part of which may be derived from drifted logs. One sample was found to be barren of organic matter, and two contain only fusinite and semifusinite. Variation of vitrinite reflectance is not systematic with either depth or location, and it appears that formation temperatures have been insufficient to cause an increase in vitrinite reflectance levels. Textural variations within the vitrinite show better correlation with depth. Samples of hypautochthonous peats represent either a terrestrial phase of sedimentation or large peat intraclasts within the section, possibly produced by forest fires in the source areas of the organic matter. The vitrinite and peat-derived samples appear to come from eucalyptus forest settings away from the coastline. Liptinite is not abundant in most of the samples (excluding suberinite associated with woody tissues). Marine liptinite is rare to absent, although many of the samples contain abundant foraminiferal tests. Pyrite is abundant in many of the wood fragments, and some pyritization of woody tissues has taken place.

Planktonic foraminifer abundance and estimated sea surface temperatures and salinities of DSDP Leg 74 holes

Two hydraulic piston cores containing the total Quaternary suite were analyzed quantitatively in their planktonic foraminiferal contents. For the Early Pleistocene, the Caribbean standard zonation (BOLLI & PREMOLI-SILVA) can be adopted and refined by the introduction of an additional subzone at its base (the Globorotalia triangula subzone). Local substages are proposed for the Late Pleistocene because index fossils are missing. The use of the transfer-function technique resulted in paleotemperature and paleosalinity curves with a time resolution of cycles of about 4-68,000 years duration. The Early Pleistocene paleoenvironment is characterized by low oscillations of the surface water temperatures, followed by a distinct cooling trend during the Globorotalia viola subzone, a period of smoothed cycles during the Globorotalia hessi subzone and distinctly developed cycles during the late Pleistocene since the oxygen isotope termination III. Grainsize distribution and several dissolution indices gave evidence for current activities on the top of the Walvis Ridge, where the amount of fine grained components in the sediment is reduced in comparison with that of the flanks.

Chemical compositions of Fe-Mn nodules and host sediments from the Northwest Pacific

A number of regularities of ore element accumulation in iron-manganese nodules along the profile from the Tsugaru Strait to the Wake Atoll is identified in the paper. It is shown that the ore process is enhanced to the pelagic zone: in nodules content of ore material increases and content of mineral insoluble residue decreases from near-shore areas to central parts of the ocean. Diagenetic redistribution of the elements between host sediments and nodules resulting to enrichment of the latter increases from bottom sediments of the ocean periphery to fine grained pelagic muds. At absolute enrichment by Fe, Mn, Cu, Ni, Co, Mo, W, Ti, Zr, and V (as compared to host sediments) nodules are relatively enriched in Mn group elements (Cu, Ni, Co, Mo, W) and consequently depleted in Fe group elements (Ti, V, Zr) in the direction from the periphery to the center of the ocean. The ratio of reactive forms of Fe and Mn in host sediments is a factor determining the ratio of Fe group and Mn group elements in nodules.

Visual estimates of carbonate particles and coccolith abundance at DSDP Hole 75-530A

The upper Albian to Coniacian section (Cores 105 to 89) at Site 530 contains rare and poorly preserved coccoliths at a few levels and fine-fraction carbonate ("micarb") at all the levels studied. Dissolution ranking of the most resistant coccolith species is possible. Changes in the dissolution intensity resulting from variations in the organic carbon and carbonate input seem a likely explanation for changes in the relative abundance of fine-fraction carbonates types.

Mineral, chemical and isotope compositions of clay subfractions from formations of the Srednii Peninsula, Murmansk coast of the Barents Sea

Fine-grained clay subfractions (SFs) with particle size of <0.1, 0.1-0.2, 0.2-0.3, 0.3-0.6, 0.6-2.0, and 2-5 µm separated from claystone of Upper Precambrian Pumanskaya and Poropelonskaya formations on the Srednii Peninsula were studied by transmission electron microscopy, X-ray diffraction, and Rb-Sr methods. All subfractions consist of low-temperature illite and chlorite, and contribution of chlorite decreases with diminishing particle size. The crystallinity index and I002/I001 ratio increase from coarse- to fine-grained SFs. Leaching by ammonium acetate solution and Rb-Sr systematics in combination with mineralogical and morphological data indicate that illite in Upper Proterozoic claystone from the Srednii Peninsula formed during three time intervals: 810-830, 610-620, and about 570 Ma ago. The first generation of this mineral with low Rb/Sr ratio dominates in coarse-grained SFs while the second and third generations with a high Rb/Sr ratio prevail in fine-grained SFs. All of three generations are known in Poropelon claystone, whereas Puman claystone contains only illite of the first and second generations. Geological processes responsible for multistage illite evolution in claystones are discussed.

Distribution of planktic foraminifera in surface sediments and sedimentation rates of sediment cores from the Ibero-Moroccan continental rise and slope

Cores from the Atlantic Ibero-Moroccan continental rise and slope contain fine-grained Late Pleistocene and Holocene sediments. These young sediments cover the continental margin in large lensformed litho- and biostratigraphically well-defined units. The total sedimentation rates range from 4 cm/ 1000 yrs. to 27 cm/1000 yrs. off Portugal and from 6 cm/1000 yrs. to 14 cm/1000 yrs. off Morocco. Only a small proportion of these sediments usually consists of sand-sized particles (>0.063 mm) which are mostly dominated by foraminifera. Both planktonic and benthic foraminifera are much more abundant in Late Pleistocene and Holocene samples from the upper slope in comparison to those from the deeper slope and from the abyssal plains. Total sedimentation rates during cool and warm climatic stages are rather similar for both groups of foraminifera. For example, in Late Holocene sediments 7 x 10**3 benthic and 201 x 10**3 planktonic foraminifera (fraction 0.63 -0.20 mm) per 100 cm**2 and 1000 yrs. are preserved in the Tagus, 10-19 X 10**3 benthic and about 1.3 X 10**6 planktonic foraminifera are preserved in the Seine abyssal plain sediments. Values from the upper slope sediments are higher for benthic foraminifera by a factor of 60 off Portugal and 60 to 70 off Morocco. The values for planktonic ones differ by factors of 6-12 and 6 respectively. These numbers seem to reflect differences in production and preservation. Production rates of planktonic foraminifera generally seem to be somewhat higher during Holocene than during Late Pleistocene, and the rates of benthic foraminifera appear rather higher during Late Pleistocene than during Holocene.

Description of recent sediments of Nile Delta, Red Sea and Gulf of Aden (Table 1-3)

The study of textural, structural, chemical, and physical properties of fine-grained recent marine sediments leads to the conclusion that only a few compositional factors are responsible for significant changes in mass physical characteristics in the upper meters below sea bottom. Fossil-induced porosity increases water content and liquid limit. It also seems to have partially influenced the plastic limit and plasticity index of calcareous sandy silts from the Red Sea and the western Gulf of Aden so that they become similar to the montmorillonite rich prodelta clays from the Nile Delta. Diagrams based on liquid limit and plasticity loose their original meaning in these cases. Activity of sediments rich in microorganisms can be higher than that of montmorillonitic clay. The shear strength-depth relationship of normally consolidated sediments is surprisingly little influenced by changes in sand or clay content and clay mineralogy. Only high lime content, submarine erosion and beginning cementation increase the strength considerably. Erosional disconformities near the present surface can be deduced from the strength-depth curve when as little as 1 or 2 m sediment have been removed. Flat or irregular strength-depth curves indicate beginning cementation and probably discontinuous sedimentation, provided the composition of the material remains in some degree constant. In our samples diagenetic pyrite, but no recristallisation of carbonates could be detected under the microscope. Underconsolidation and excess pore-water pressure, factors which tend to foster submarine slides, mud lumps, and diapiric folding, seem to be restricted Varito areas with mainly rapidly deposited, homogeneous or layered sediments. But where an abundance of burrowing organisms increases the vertical permeability of the sediment, normal consolidation and stable deposits are to be expected, at least in the upper meters below the present surface. According to 14C-determinations on calcareous microorganisms the rate of deposition of the investigated sediments seems to range from 26 to 167 cm per 1000 years.

(Table T2) Remanent anomaly and Koenigsberger ratio of ODP holes

Magnetic field strength and magnetic susceptibility were logged with the geological high-resolution magnetic tool (GHMT) at three of the holes drilled during Ocean Drilling Program Leg 178 to the west of the Antarctic Peninsula. Polarity stratigraphies derived from the GHMT logs bear close resemblance to the polarities determined from core paleomagnetism at two of the holes and were used for magnetostratigraphic dating, especially in intervals where no core was recovered. Polarity is determined in the following way. First, the susceptibility log is used to determine the induced magnetization of the sediment. Then the background field, the field of the metal drill pipe, and the field anomaly of the sediment's induced magnetization are removed from the measured total field to leave the downhole anomaly of the sediment's remanent magnetization. The sign (positive or negative) of this anomaly gave a good polarity stratigraphy for Holes 1095B and 1096C, which are located in sediment drifts. A further step, correlation analysis, is based on the fact that in an interval of normal polarity sediment the remanent anomaly will correlate with the induced anomaly, whereas in reversed polarity sediment they will anticorrelate. The magnetite-rich, fine-grained sediments found in the two holes drilled into the sediment drift have a ratio of remanent to induced magnetization (the Koenigsberger ratio) of ~1. In contrast, the coarser-grained diamict sediments on the shelf have a Koenigsberger ratio of ~0.2, and extracting the remanent part of the downhole anomaly is much more difficult. By the comparison of core and log results, we can assess the viability of the GHMT polarities in detail, what proportion of the overprint in the cores is imparted by the coring process, and whether any paleointensity information is extractable from the GHMT logs.