222 resultados para Turbidites


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Drill core recovered at Ocean Drilling Program Site 808 (Leg 131) proves that the wedge of trench sediment within the central region of the Nankai Trough comprises approximately 600 m of hemipelagic mud, sandy turbidites, and silty turbidites. The stratigraphic succession thickens and coarsens upward, with hemipelagic muds and volcanic-ash layers of the Shikoku Basin overlain by silty and sandy trench-wedge deposits. Past investigations of clay mineralogy and sand petrography within this region have led to the hypothesis that most of the detritus in the Nankai Trough was derived from the Izu-Honshu collision zone and transported southwestward via axial turbidity currents. Shipboard analyses of paleocurrent indicators, on the other hand, show that most of the ripple cross-laminae within silty turbidites of the outer marginal trench-wedge facies are inclined to the north and northwest; thus, many of the turbidity currents reflected off the seaward slope of the trench rather than moving straight down the trench axis. Shore-based analyses of detrital clay minerals demonstrate that the hemipelagic muds and matrix materials within sandy and silty turbidites are all enriched in illite; chlorite is the second-most abundant clay mineral, followed by smectite. In general, the relative mineral percentages change relatively little as a function of depth, and the hemipelagic clay-mineral population is virtually identical to the turbidite-matrix population. Comparisons between different size fractions (<2 µm and 2-6 µm) show modest amounts of mineral partitioning, with chlorite content increasing in the coarser fraction and smectite increasing in the finer fraction. Values of illite crystallinity index are consistent with conditions of advanced anchimetamorphism and epimetamorphism within the source region. Of the three mica polytypes detected, the 2M1 variety dominates over the 1M and 1Md polytypes; these data are consistent with values of illite crystallinity. Measurements of mica bo lattice spacing show that the detrital illite particles were eroded from a zone of intermediate-pressure metamorphism. Collectively, these data provide an excellent match with the lithologic and metamorphic character of the Izu-Honshu collision zone. Data from Leg 131, therefore, confirm the earlier interpretations of detrital provenance. The regional pattern of sediment dispersal is dominated by a combination of southwest-directed axial turbidity currents, radial expansion of the axial flows, oblique movement of suspended clouds onto and beyond the seaward slope of the Nankai Trough, and flow reflection back toward the trench axis.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The location of the seaward tip of a subduction thrust controls material transfer at convergent plate margins, and hence global mass balances. At approximately half of those margins, the material of the subducting plate is completely underthrust so that no accretion or even subduction erosion takes place. Along the remaining margins, material is scraped off the subducting plate and added to the upper plate by frontal accretion. We here examine the physical properties of subducting sediments off Costa Rica and Nankai, type examples for an erosional and an accretionary margin, to investigate which parameters control the level where the frontal thrust cuts into the incoming sediment pile. A series of rotary-shear experiments to measure the frictional strength of the various lithologies entering the two subduction zones were carried out. Results include the following findings: (1) At Costa Rica, clay-rich strata at the top of the incoming succession have the lowest strength (µres = 0.19) while underlying calcareous ooze, chalk and diatomite are strong (up to µres = 0.43; µpeak = 0.56). Hence the entire sediment package is underthrust. (2) Off Japan, clay-rich deposits within the lower Shikoku Basin inventory are weakest (µres = 0.13-0.19) and favour the frontal proto-thrust to migrate into one particular horizon between sandy, competent turbidites below and ash-bearing mud above. (3) Taking in situ data and earlier geotechnical testing into account, it is suggested that mineralogical composition rather than pore-pressure defines the position of the frontal thrust, which locates in the weakest, clay mineral-rich (up to 85 wt.%) materials. (4) Smectite, the dominant clay mineral phase at either margin, shows rate strengthening and stable sliding in the frontal 50 km of the subduction thrust (0.0001-0.1 mm/s, 0.5-25 MPa effective normal stress). (5) Progressive illitization of smectite cannot explain seismogenesis, because illite-rich samples also show velocity strengthening at the conditions tested.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Gravity cores obtained from isolated seamounts located within, and rising up to 300 m from the sediment-filled Peru-Chile Trench off Southern Central Chile (36°S-39°S) contain numerous turbidite layers which are much coarser than the hemipelagic background sedimentation. The mineralogical composition of some of the beds indicates a mixed origin from various source terrains while the faunal assemblage of benthic foraminifera in one of the turbidite layers shows a mixed origin from upper shelfal to middle-lower bathyal depths which could indicate a multi-source origin and therefore indicate an earthquake triggering of the causing turbidity currents. The bathymetric setting and the grain size distribution of the sampled layers, together with swath echosounder and sediment echosounder data which monitor the distribution of turbidites on the elevated Nazca Plate allow some estimates on the flow direction, flow velocity and height of the causing turbidity currents. We discuss two alternative models of deposition, both of which imply high (175-450 m) turbidity currents and we suggest a channelized transport process as the general mode of turbidite deposition. Whether these turbidites are suspension fallout products of thick turbiditic flows or bedload deposits from sheet-like turbidity currents overwhelming elevated structures cannot be decided upon using our sedimentological data, but the specific morphology of the seamounts rather argues for the first option. Oxygen isotope stratigraphy of one of the cores indicates that the turbiditic sequences were deposited during the last Glacial period and during the following transition period and turbiditic deposition stopped during the Holocene. This climatic coupling seems to be dominant, while the occurrence of megathrust earthquakes provides a trigger mechanism. This seismic triggering takes effect only during times of very high sediment supply to the shelf and slope.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Five sites were drilled on the Iberia Abyssal Plain, west of the Iberian Peninsula. Four holes (897C, 897D, 899B, and 900A) yielded Eocene sediments that consist of turbidites and contourites. The Eocene section above the continental crust at Site 900 is continuous (from nannofossil Zones NP10 to NP20) and considerably expanded because of the site's relatively shallow depth, which remained consistently above the carbonate compensation depth (CCD). Sites 897 and 898, situated in deeper water above the ocean/continent transition, on the other hand, have noncontinuous, relatively short Eocene sections (from Zones NP14 to NP20 at Site 897 and from Zones NP19 to NP20 at Site 899). Nannofossils are abundant, diverse, and moderately to poorly preserved; they provide the primary means of dating the Eocene sediments recovered during Leg 149.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In ocean margin sediments both marine and terrestrial organic matter (OM) are buried but the factors governing their relative preservation and degradation are not well understood. In this study, we analysed the degree of preservation of marine isoprenoidal and soil-derived branched glycerol dialkyl glycerol tetraethers (GDGTs) upon long-term oxygen exposure in OM-rich turbidites from the Madeira Abyssal Plain by analyzing GDGT concentrations across oxidation fronts. Relative to the anoxic part of the turbidites ca. 7-20% of the soil-derived branched GDGTs were preserved in the oxidized part while only 0.2-3% of the marine isoprenoid GDGT crenarchaeol was preserved. Due to these different preservation factors the Branched Isoprenoid Tetraether (BIT) index, a ratio between crenarchaeol and the major branched GDGTs that is used as a tracer for soil-derived organic matter, substantially increases from 0.02 to 0.4. Split Flow Thin Cell (SPLITT) separation of turbidite sediments showed that the enhanced preservation of soil-derived carbon was a general phenomenon across the fine particle size ranges (<38 ?m). Calculations reveal that, despite their relatively similar chemical structures, degradation rates of crenarchaeol are 2-fold higher than those of soil-derived branched GDGTs, suggesting preferential soil OM preservation possibly due to matrix protection.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Siliciclastic turbidites represent huge volumes of sediments, which are of particular significance for (1) petroleum researchers, interested in their potential as oil reservoirs and (2) sedimentologists, who aim at understanding sediment transport processes from continent to deep-basins. An important challenge when studying marine turbidites has been to establish a reliable chronology for the deposits. Indeed, conventional marine proxies applied to hemipelagic sediments are often unreliable in detrital clays. In siliciclastic turbidites, those proxies can be used only in hemipelagic intervals, providing a poor constraint on their chronology. In this study, we have used sediments from the Rhône Neofan (NW Mediterranean Sea) to demonstrate that pollen grains can provide a high-resolution chronostratigraphical framework for detrital clays in turbidites. Vegetation changes occurring from the end of Marine Isotopic Stage 3 to the end of Marine Isotopic Stage 2 (from ~30 to ~18 ka cal. BP) are clearly recorded where other proxies have failed previously, mainly because the scarcity of foraminifers in these sediments prevented any continuous Sea Surface Temperature (SST) record and radiocarbon dating to be obtained. We show also that the use of palynology in turbidite deposits is able to contribute to oceanographical and sedimentological purposes: (1) Pinus pollen grains can document the timing of sea-level rise, (2) the ratio between pollen grains transported from the continent via rivers and dinoflagellate cysts (elutriating) allows us to distinguish clearly detrital sediments from pelagic clays. Finally, taken together, all these tools show evidence that the Rhône River disconnected from the canyon during the sea-level rise and thus evidence the subsequent rapid starvation of the neofan at 18.5 ka cal. BP. Younger sediments are hemipelagic: the frequency of foraminifers allowed to date sediments with radiocarbon. First results of Sea Surface Temperature obtained on foraminifers are in good agreement with the dinoflagellate cysts climatic signal. Both provide information on the end of the deglaciation and the Holocene.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Late Cretaceous and younger sediments dredged from the upper continental slope and canyon walls in the Great Australian Bight Basin between 126° and 136°E broadly confirm the stratigraphy which had been established previously from scattered exploration wells. Late Cretaceous to Early Eocene marine and marginal marine terrigenous sediments are overlain by Middle Eocene and younger pelagic carbonate (fine limestone and calcareous ooze). The samples provide the first evidence of truly marine Maastrichtian sedimentation, with abundant calcareous nannoplankton, on the southern margin of the continent. Other samples of interest include Precambrian sheared granodiorite on the upper slope south of Eyre Terrace, Paleocene phosphatic sediment in 'Eucla' Canyon at 128° 30'E, and terrigenous Early Miocene mudstone at 133° 20' and 134° 50'E. The mudstone is of note as an exception to the uniform pelagic carbonate wackestone and ooze which characterise Middle Eocene and younger sedimentation at all other sites. Fragments of alkali basalt lava of unknown age were recovered in 'Eucla' Canyon. Cores are mostly pelagic calcareous ooze, but those from submarine canyons include terrigenous turbidites.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Commercial exploitation and abrupt changes of the natural conditions may have severe impacts on the Arctic deep-sea ecosystem. The present recolonisation experiment mimicked a situation after a catastrophic disturbance (e.g. by turbidites caused by destabilized continental slopes after methane hydrate decomposition) and investigated if the recolonisation of a deep-sea habitat by meiobenthic organisms is fostered by variations innutrition and/or sediment structure. Two "Sediment Tray Free Vehicles" were deployed for one year in summer 2003 at 2500 m water depth in the Arctic deep-sea in the eastern Fram Strait. The recolonisation trays were filled with different artificial and natural sediment types (glass beads, sand, sediment mixture, pure deep-sea sediment) and were enriched with various types of food (algae, yeast, fish). After one year, meiobenthos abundances and various sediment related environmental parameters were investigated. Foraminifera were generally the most successful group: they dominated all treatments and accounted for about 87% of the total meiobenthos. Colonizing meiobenthos specimens were generally smaller compared to those in the surrounding deep-sea sediment, suggesting an active recolonisation by juveniles. Although experimental treatments with fine-grained, algae-enriched sediment showed abundances closest to natural conditions, the results suggest that food availability was the main determining factor for a successful recolonisation by meiobenthos and the structure of recolonised sediments was shown to have a subordinate influence.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

On the continental rise west of the Antarctic Peninsula there are nine large mounds interpreted as sediment drifts, separated by turbidity current channels. Drift 7 is 150 km long, 70 km wide and up to 700 m high and is asymmetric, with steep sides on the south-east (towards the continent) and south-west, and gentle slopes to north-west and north-east. Cores on the gentle sides of the drift show a cyclicity between brown, bioturbated, diatom-bearing mud with foraminifera and radiolarians, and grey, laminated, barren mud. Biostratigraphic evidence is consistent with a Late Quaternary age. Detailed lithostratigraphy and magnetic susceptibility data allow precise correlation over distances of tens of kilometres. On the basis of chemostratigraphy, the brown sediment is interpreted as interglacial (isotope stages 1 and 5) and the grey as glacial (stages 2-4 and 6). Sedimentation rates are 3.0-5.5 cm/ka. Cores on the steep sides of the drift recovered a condensed section with thinner cycles and hiatuses. Fine grain size, very poor sorting and the absence of a mode in the silt size range indicate deposition from suspension with only weak current activity, There is little evidence for cyclic changes in bottom current strength. Supply of sediment to the benthic nepheloid layer was by entrainment ofmud from turbidity currents, and by settling ofpelagic material (biogenic grains, IRD, sediment suspended in meltwater plumes). Cyclic changes in sediment supply include more biogenic supply in interglacials with less sea ice cover, more terrigenous supply from turbidites in glacials with ice sheets grounded to the shelf edge, and changes in IRD content.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Physical and sedimentological investigations were carried out on a 14 m long gravity core and a 0.5 m long box core from 4440 m water depth off Queen Maud Land, East-Antarctica. Strongly bioturbated hemipelagic muds of predominantly terrigenous origin and a very small biogenic part build up the 'Normal-Facies'. Several sandy to silty layers are inserted in the 'Normal-Facies'. These layers are seperated by lithology, structure and the investigated parameters of this study and are interpreted as turbidites. The source area for the turbidity currents is supposed to be at the uppermost continental margin, close to the shelf break and there is evidenee for this gravity transport within the erosive Ritscher-Canyon, which extends close to the core position. The distribution of biogenic components indicates an age of 1.3 million years or more, with an average sedimentation rate of about 1 cm/1000 years. Early diagenetic proeesses caused water loss by compaction, errosion and dissolution of biogenic components and precipitation and recrystallization of manganese micronodules. Cyclic fluctuations of the sediment-parameters within the 'Normal-Facies' enable the distinction of a 'Glazial'- and an 'Interglazial'-Facies. The 'Glazial'-Facies reflects glacial sedimentary conditions and shows a dark olive gray colour, high susceptibility, low silt/clay-ratios, only a few biogenic components and the regular occurence of interrelated turbidite layers. In contrast, the 'Interglazial'-Facies is dominated by a light olive or olive-brown colour, low susceptibility, high silt/clay-ratios and an increased number of biogenic components. This facies corresponds to interglacial conditions. Three main processes are supposed to have been responsible for the observed facies changes: (1) the bottom water mass circulation, (2) the gravity transport by turbidity currents and (3) the biogenic surface production. These processes are related to the quaternary climatic changes. The extension of the ice shelves directed the gravity transport to the deep sea and the formation of Antarctic Bottom Water, which in turn influenced the silt/clay-ratios in the sediment record. Fluctuations in sea ice coverage controlled the biogenic surface production.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The oceanic carbon cycle mainly comprises the production and dissolution/ preservation of carbonate particles in the water column or within the sediment. Carbon dioxide is one of the major controlling factors for the production and dissolution of carbonate. There is a steady exchange between the ocean and atmosphere in order to achieve an equilibrium of CO2; an anthropogenic rise of CO2 in the atmosphere would therefore also increase the amount of CO2 in the ocean. The increased amount of CO2 in the ocean, due to increasing CO2-emissions into the atmosphere since the industrial revolution, has been interpreted as "ocean acidification" (Caldeira and Wickett, 2003). Its alarming effects, such as dissolution and reduced CaCO3 formation, on reefs and other carbonate shell producing organisms form the topic of current discussions (Kolbert, 2006). Decreasing temperatures and increasing pressure and CO2 enhance the dissolution of carbonate particles at the sediment-water interface in the deep sea. Moreover, dissolution processes are dependent of the saturation state of the surrounding water with respect to calcite or aragonite. Significantly increased dissolution has been observed below the aragonite or calcite chemical lysocline; below the aragonite compensation depth (ACD), or calcite compensation depth (CCD), all aragonite or calcite particles, respectively, are dissolved. Aragonite, which is more prone to dissolution than calcite, features a shallower lysocline and compensation depth than calcite. In the 1980's it was suggested that significant dissolution also occurs in the water column or at the sediment-water interface above the lysocline. Unknown quantities of carbonate produced at the sea surface, would be dissolved due to this process. This would affect the calculation of the carbonate production and the entire carbonate budget of the world's ocean. Following this assumption, a number of studies have been carried out to monitor supralysoclinal dissolution at various locations: at Ceara Rise in the western equatorial Atlantic (Martin and Sayles, 1996), in the Arabian Sea (Milliman et al., 1999), in the equatorial Indian Ocean (Peterson and Prell, 1985; Schulte and Bard, 2003), and in the equatorial Pacific (Kimoto et al., 2003). Despite the evidence for supralysoclinal dissolution in some areas of the world's ocean, the question still exists whether dissolution occurs above the lysocline in the entire ocean. The first part of this thesis seeks answers to this question, based on the global budget model of Milliman et al. (1999). As study area the Bahamas and Florida Straits are most suitable because of the high production of carbonate, and because there the depth of the lysocline is the deepest worldwide. To monitor the occurrence of supralysoclinal dissolution, the preservation of aragonitic pteropod shells was determined, using the Limacina inflata Dissolution Index (LDX; Gerhardt and Henrich, 2001). Analyses of the grain-size distribution, the mineralogy, and the foraminifera assemblage revealed further aspects concerning the preservation state of the sediment. All samples located at the Bahamian platform are well preserved. In contrast, the samples from the Florida Straits show dissolution in 800 to 1000 m and below 1500 m water depth. Degradation of organic material and the subsequent release of CO2 probably causes supralysoclinal dissolution. A northward extension of the corrosive Antarctic Intermediate Water (AAIW) flows through the Caribbean Sea into the Gulf of Mexico and might enhance dissolution processes at around 1000 m water depth. The second part of this study deals with the preservation of Pliocene to Holocene carbonate sediments from both the windward and leeward basins adjacent to Great Bahama Bank (Ocean Drilling Program Sites 632, 633, and 1006). Detailed census counts of the sand fraction (250-500 µm) show the general composition of the coarse grained sediment. Further methods used to examine the preservation state of carbonates include the amount of organic carbon and various dissolution indices, such as the LDX and the Fragmentation Index. Carbonate concretions (nodules) have been observed in the sand fraction. They are similar to the concretions or aggregates previously mentioned by Mullins et al. (1980a) and Droxler et al. (1988a), respectively. Nonetheless, a detailed study of such grains has not been made to date, although they form an important part of periplatform sediments. Stable isotopemeasurements of the nodules' matrix confirm previous suggestions that the nodules have formed in situ as a result of early diagenetic processes (Mullins et al., 1980a). The two cores, which are located in Exuma Sound (Sites 632 and 633), at the eastern margin of Great Bahama Bank (GBB), show an increasing amount of nodules with increasing core depth. In Pliocene sediments, the amount of nodules might rise up to 100%. In contrast, nodules only occur within glacial stages in the deeper part of the studied core interval (between 30 and 70 mbsf) at Site 1006 on the western margin of GBB. Above this level the sediment is constantly being flushed by bottom water, that might also contain corrosive AAIW, which would hinder cementation. Fine carbonate particles (<63 µm) form the matrix of the nodules and do therefore not contribute to the fine fraction. At the same time, the amount of the coarse fraction (>63 µm) increases due to the nodule formation. The formation of nodules might therefore significantly alter the grain-size distribution of the sediment. A direct comparison of the amount of nodules with the grain-size distribution shows that core intervals with high amounts of nodules are indeed coarser than the intervals with low amounts of nodules. On the other hand, an initially coarser sediment might facilitate the formation of nodules, as a high porosity and permeability enhances early diagenetic processes (Westphal et al., 1999). This suggestion was also confirmed: the glacial intervals at Site 1006 are interpreted to have already been rather coarse prior to the formation of nodules. This assumption is based on the grain-size distribution in the upper part of the core, which is not yet affected by diagenesis, but also shows coarser sediment during the glacial stages. As expected, the coarser, glacial deposits in the lower part of the core show the highest amounts of nodules. The same effect was observed at Site 632, where turbidites cause distinct coarse layers and reveal higher amounts of nodules than non-turbiditic sequences. Site 633 shows a different pattern: both the amount of nodules and the coarseness of the sediment steadily increase with increasing core depth. Based on these sedimentological findings, the following model has been developed: a grain-size pattern characterised by prominent coarse peaks (as observed at Sites 632 and 1006) is barely altered. The greatest coarsening effect due to the nodule formation will occur in those layers, which have initially been coarser than the adjacent sediment intervals. In this case, the overall trend of the grain-size pattern before and after formation of the nodules is similar to each other. Although the sediment is altered due to diagenetic processes, grain size could be used as a proxy for e.g. changes in the bottom-water current. The other case described in the model is based on a consistent initial grain-size distribution, as observed at Site 633. In this case, the nodule reflects the increasing diagenetic alteration with increasing core depth rather than the initial grain-size pattern. In the latter scenario, the overall grain-size trend is significantly changed which makes grain size unreliable as a proxy for any palaeoenvironmental changes. The results of this study contribute to the understanding of general sedimentation processes in the periplatform realm: the preservation state of surface samples shows the influence of supralysoclinal dissolution due to the degradation of organic matter and due to the presence of corrosive water masses; the composition of the sand fraction shows the alteration of the carbonate sediment due to early diagenetic processes. However, open questions are how and when the alteration processes occur and how geochemical parameters, such as the rise in alkalinity or the amount of strontium, are linked to them. These geochemical parameters might reveal more information about the depth in the sediment column, where dissolution and cementation processes occur.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Pelagic sedimentation during the Early Cretaceous at Site 603 produced alternations of laminated marly limestone and bioturbated limestone-a facies typical of the "Blake-Bahama Formation" of the western Atlantic. This limestone is a nannofossil micrite, rich in calcified radiolarians, with variable amounts of organic matter, pyritized radiolarian tests, fish debris, and micaceous silt. The laminated marly limestone layers are enriched in organic matter when compared with the intervals of bioturbated limestone. The organic carbon is predominantly terrestrial plant debris; where the organic-carbon content is in excess of 1%, there is also a significant marine-derived component. Laminations can result either from bands of alternately enriched and depleted opaque material and clay, or from bands of elongate lenses (microflasers) of micrite, which could be plastically deformed pellets or diagenetic features. The alternating intervals of laminated and bioturbated structures may have resulted from combined changes in surface productivity, in the influx of terrigenous organic matter, and in the intensity of bottom circulation, which led to episodic oxygen depletion in the bottom water and sediments. Variations in the relative proportions of laminated clay-rich and bioturbated lime-rich limestone and in the development of cycles between these structures make it possible to subdivide the Lower Cretaceous pelagic facies into several subunits which appear to be regional in extent. Bioturbated limestone is dominant in the Berriasian, laminated marly limestone in the Valanginian and Barremian-lower Aptian, and well-developed alternations between these end members in the Hauterivian. The Hauterivian to lower Aptian sediments contain abundant terrigenous clastic turbidites associated with a submarine fan complex. These changes in the general characteristics of the pelagic sediment component of the Blake-Bahama Formation at Site 603 are synchronous with those in the Blake-Bahama Basin (Sites 534 and 391) to the south. Carbonate sedimentation ended in the early Aptian, probably because of a regional shoaling of the carbonate compensation depth.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Sediment descriptions and lithostratigraphy (chapter 6.4) NANSEN BASIN The upperrnost 20-50 cm of sedirnents in the Nansen Basin norrnally cornprise soft dark brown, brown-grayish and brown clay. Except for the toprnost clay, the four piston cores retrieved, contained quite different lithologies: a rnuddy diarnicton with outsized clasts (PS2157-6), sandy-silt beds alternating with clay beds (PS2159-6), and silty clay beds of brownish and grayish colours (PS2161-3). Core PS2208-3 was retrieved frorn a plateau on a searnount. The plateau was serni-encircled by hills. The upper 250 cm of this core cornprise brown and olive brown clays. Below these are several sandlayers and a 74 cm thick unit of a sandy mud with rnud-clasts up to 20 cm in diameter. GAKKEL RIDGE The uppermost 20-50 cm of sediments on the Gakkel Ridge comprise soft dark brown, brown, grayish brown clay. In most of the cores there are two horizons of brown clay separated by olive brown clay. The upper horizon is darker. The older stratigraphy is rather varied. Core PS2165-1 contains several thin gray sandlsilt layers, probably distal turbidites. The sarne is found in Core PS2167-1. This core also has a thick (approx. 2 rn) coarse grained turbidite containing large rnud clasts and basaltic rock fragrnents. The color of the turbiditic layers is dark gray. There are several horizons of hernipelagic sandylsilty clays with quite a variety in colours; black, gray, olive, brown, yellowish brown and reddish. The colour variation rnay be due to hydrotherrnal activity or provenance or a shift in redox potential. Cores PS2168-2 and PS2169-1 have typical sequences of very dark gray sandy mud with sharp lower boundaries grading upwards into olive brown clay. Below the lower boundary is often a thin (1-2 cm) gray clay layer. AMUNDSEN BASIN The giant box cores (GKG) provided in most cases excellently preserved sedirnent surfaces which consisted in the entire Amundsen Basin of dark brown to dark grayish brown silty clay with few dropstones and common calcareous microfossils (foraminifers and calcareous nannofossils). The brown and grayish brown color of the sediment surface is a result of the oxidizing conditions at the seafloor due to the rapid renewal of the bottom water rnasses. Planktic forarninifers and calcareous nannofossils are relatively frequent and well preserved despite the rernote location of the basin and its water depths of >4000 rn. Srnear slide descriptions have shown that the surface sedirnents consist dorninantly of clays to silty rnuds with clay rninerals and quartz as the rnost important constituents. The coarse fractions contained besides planktic and benthic forarninifers and coarse clastic rnaterials, rare bivalves, dropstones and mud clasts. The Station PS2190 at the North Pole is a particular good exarnple of the type of sedirnents deposited at the sea floor surface of the Arnundsen Basin, with hornogenous dark brown soft clay covering a sedirnent sequence of highly variable cornposition. Nurnerous giant box cores also provide insight into the detailed lithostratigraphy of the upperrnost sedirnent layers. Twelve box cores have been collected frorn the Arnundsen Basin. Below the youngest unit of 5-20 crn thick silty clays deposits of variable stratigraphies have been found, rnostly consisting of clays or silty clays. In a few instances turbidites have been observed. Benthic forarninifers have not been found in the surface sedirnents. Other fossils were extrernely rare. Bioturbation is weakly developed on all stations. Benthic anirnals seern to live only in and on the upperrnost 2 cm of the uppermost sediment layer. They cornprise amphipods (on all stations) and holothurians, bryozoans, polychaetes, and porifers at one station each. LOMONOSOV RIDGE Sediments from the Lomonosov Ridge show a variety of colors and textures. Following smear slide analyses they are composed mostly of clay minerals and quartz with mica and feldspars, especially in the siltier and sandier parts. Volcanic glass, microcrystalline carbonate, opaque minerals and green amphibole are occasional accessories. The sediments from the Lomonosov Ridge show a noticeable difference from sediments collected from the surrounding basins. Lomonosov Ridge sediments are richer in silt and sand than basin sediments. Occasional turbidites occur in ridge sediments but these must be of entirely local origin. The ridge sediments include frequent layers of "cottage cheese" texture made up of what appear to be small, angular mud clasts of a variety of colors.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Sediment and interstitial water samples recovered during DSDP Leg 93 at Site 603 (lower continental rise off Cape Hatteras) were analyzed for a series of geochemical facies indicators to elucidate the nature and origin of the sedimentary material. Special emphasis was given to middle Cretaceous organic-matter-rich turbidite sequences of Aptian to Turanian age. Organic carbon content ranges from nil in pelagic claystone samples to 4.2% (total rock) in middle Cretaceous carbonaceous mudstones of turbiditic origin. The organic matter is of marine algal origin with significant contributions of terrigenous matter via turbidites. Maturation indices (vitrinite reflectance) reveal that the terrestrial humic material is reworked. Maturity of autochthonous material (i.e., primary vitrinite) falls in the range of 0.3 to 0.6% Carbohydrate, hydrocarbon, and microscopic investigations reveal moderate to high microbial degradation. Unlike deep-basin black shales of the South and North Atlantic, organic-carbon-rich members of the Hatteras Formation lack trace metal enrichment. Dissolved organic carbon (DOC) in interstitial water samples ranges from 34.4 ppm in a sandstone sample to 126.2 ppm in an organic-matter-rich carbonaceous claystone sample. One to two percent of DOC is carbohydratecarbon.