185 resultados para Reception and integration
Resumo:
The study site was located in the Disko Bay off Qeqertarsuaq, western Greenland. Due to land-connected sea ice coverage during winter, 2 sampling sites were combined. At the first site in winter (21 February to 23 March 2008), sampling was conducted through a hole in the ice at ca. 65 to 160 m depth approximately 0.5 nautical mile (n mile) south of Qeqertarsuaq (69° 14' N, 53° 29' W). In spring and summer (9 April to 18 July), sampling was done at a monitoring station 1 n mile south from Qeqertarsuaq (69° 14' N, 53° 23' W) at 300 m depth. Sampling was carried out between 10:00 and 17:00 h. During sampling from the ice, mesozooplankton was collected using a modified WP-2 net (45 µm) equipped with a closing mechanism (Hydrobios). Samples were collected in 3 depth strata (0-50, 50-100, and 100-150 m). During ship-based sampling, mesozooplankton was collected with a multinet (50 µm) equipped with a flow meter (Multinet, Hydrobios type midi), and 2 additional depth strata (150-200m and 200-250 m) were included. In addition to the seasonal study one diurnal investigation with sampling every 6 h was conducted from 29 April at 12:00 h to 30 April 30 at 12:00 h. Samples were immediately preserved in buffered formalin (5% final concentration) for later analyses. Biomass values of the different copepod species were calculated based on measurements of prosome length, and length/weight relationships. Two regressions for Calanus spp. were established for biomass calculations: one applicable prior to and during the phytoplankton bloom until 4 May, and another from 9 May onwards.
Resumo:
The study site was located in the Disko Bay off Qeqertarsuaq, western Greenland. Due to land-connected sea ice coverage during winter, 2 sampling sites were combined. At the first site in winter (21 February to 23 March 2008), sampling was conducted through a hole in the ice at ca. 65 to 160 m depth approximately 0.5 nautical mile (n mile) south of Qeqertarsuaq (69° 14' N, 53° 29' W). In spring and summer (9 April to 18 July), sampling was done at a monitoring station 1 n mile south from Qeqertarsuaq (69° 14' N, 53° 23' W) at 300 m depth. Sampling was carried out between 10:00 and 17:00 h. During sampling from the ice, mesozooplankton was collected using a modified WP-2 net (45 µm) equipped with a closing mechanism (Hydrobios). Samples were collected in 3 depth strata (0-50, 50-100, and 100-150 m). During ship-based sampling, mesozooplankton was collected with a multinet (50 µm) equipped with a flow meter (Multinet, Hydrobios type midi), and 2 additional depth strata (150-200m and 200-250 m) were included. In addition to the seasonal study one diurnal investigation with sampling every 6 h was conducted from 29 April at 12:00 h to 30 April 30 at 12:00 h. Samples were immediately preserved in buffered formalin (5% final concentration) for later analyses. Biomass values of the different copepod species were calculated based on measurements of prosome length, and length/weight relationships. Two regressions for Calanus spp. were established for biomass calculations: one applicable prior to and during the phytoplankton bloom until 4 May, and another from 9 May onwards.
Resumo:
The goal of this work has been to examine the influence of upper ocean food web structure and functioning on both the natural and artificially enhanced sequestration of carbon within the ocean. Data obtained in the mesocosm experiment run in the Bay of Hopavågen in August 2012 are used to assess the extent to which organic matter produced within four different food webs is retained in the upper ocean food web versus remineralized back to carbon dioxide and inorganic nutrients (ammonium, dissolved silicon, phosphate) versus exported from the system in the form of rapidly sinking particles. The experiment was carried out in a set of 12 mesocosms covering, in triplicate, 2 different phytoplankton communities (diatom versus non-diatom) exposed to 2 different zooplankton communities (-copepod and +copepod). These starting conditions were established by first filling the bags, roughly simultaneously, with seawater from the Bay of Hopavågen. Mesozooplankton were then removed to the most complete extent possible immediately removed from half of the mesocosms through repeated vertical hauls of a plankton net (200 µm mesh). Nitrate and phosphate was added to half mesocosms daily to promote the growth of non-siliceous phytoplankton (e.g. dinoflagellates or coccolithophores). To the other half of the mesocosms, nitrate, phosphate, and silicate were added to promote the growth of diatoms. Material was allowed to settle and the two distinct phytoplankton populations were allowed to develop for 4 days, after which copepods collected from the Bay of Hopavågen were added back to the half of the N+P mesocosms and to the half of the N+P+Si mesocosms from which mesozooplankton had not been removed at the beginning. This yielded a set of four initial starting conditions (N+P-copepods, N+P+copepods, N+P+Si-copepods, and N+P+Si+copepods). In the primary mesocosms, samples for a set of core parameters were taken every time the mesocosms were sampled. Samples for particulates (PIC, BSi, POC, PON) were collected on GF/F or 0.4 µm polycarbonate.
Resumo:
Mesopelagic fish were collected using a 1 m**2 Double-MOCNESS (Multiple Opening and Closing Net and Environmental Sensing System) and 4.5 m**2 IKMT (Isaacs-Kidd midwater trawl). The main portion of the IKMT was 20 mm knotted nylon, and the tail bag was 3 mm knotless nylon. Oblique IKMT tows were made to a maximum depth of 500 m at a tow speed of 3.5 knots. The original cruise plan intended for nighttime IKMT tows, but tow times varied due to operational constraints. The MOCNESS was equipped with 20 nets of 333 µm mesh size; 10 nets per side. The towing speed was 2 knots. Samples were collected to a maximum depth of 1250 m. The first oblique nets sampled from the surface to the max depth, and the other nets sampled depth stratified bins of the water column. MOCNESS hauls were performed during day and night to investigate diel vertical migrations. Mesoplelagic fish were processed on board. All fish were picked from all IKMT nets, most oblique MOCNESS nets, and the left side nets of the depth stratified MOCNESS samples. The Depth stratified nets from the right side of the MOCNESS frame were preserved in 5 % formalin for future quantitative analyses of the nekton. Fish were identified to the lowest possible taxa using Whitehead et al. (1984) and Fahay (2007). Standard length of each fish was measured to the nearest 0.1 mm using a digital caliper. Measured and identified fish were frozen in an -80 °C freezer, and shipped to the University of Hamburg at the end of the cruise.
Resumo:
Oxygen concentration and rate of change of oxygen were measured using the Unisense Oxygen Microsensor System. Water from different depth was taken from CTD attached niskin bottle. Measurements were conducted in 2 ml vials provided by Unisense and lasted for a minimum of two minutes after a stable rate was achieved. The sampling interval was 6 seconds. Transport containers, tubes and vials for measurements were covered with light proof black foil for dark-measurements. Measurements labeled "unfiltered" were passed through a 200 µm sieve in order to remove potential biases stemming from individual meso-zooplankton. Measurements labeled "filtered" were passed through a 0.8 µm polycarbonate filter placed on top of a wetted GF/F filter.
Resumo:
Zooplankton samples were taken in five depth strata using a Multinet type Midi, with 50 µm nets. The samples were taken during the second leg only, three times at station 1, two times at station 2 and once at station 3. Zooplankton were identified to species / genus and life-stage, and at least 300 individuals were counted per sample. 10 individuals of each stage / species were measured and the numbers of eggs counted.
Resumo:
Slow-sinking particles were sampled using the Marine Snow Catcher (MSC). For a full description of the MSC and flux calculations see Riley et al. (2012). The MSC was deployed at four depths between 50 - 650 m during four visit at Stations 1 (63°3' N 11°0' W) and three visits at Station 2 (62°5' N 2°3' W) to obtain depth profiles of slow-sinking material. The MSC was further deployed at 50 m during two visits at Station 3 (60°2' N 1°0' E). A total of 33 MSC were deployed. Slow-sinking particles were analysed for particulate organic carbon (POC), particulate inorganic carbon (PIC), biogenic silica (BSi), and Chlorophyll a (total, >10 µm).
Resumo:
The track of the cruise, and the location of the different stations cover a large range of water masses, many of which take part in the exchange across the Greenland-Scotland Ridge, and of importance for the biogeochemical fluxes in the region. These water masses are of very different origins, which can be observed in the concentration of the different biogeochemical parameters. The concentrations are a result of the combination of the physical and biogeochemical environment in each formation region, and the processes acting on the water masses as they are transported away from the formation areas. The aim of the biogeochemistry measurements was to achieve a better understanding of the strength and variability of the biological carbon pump in the North Atlantic and Nordic Seas.
Resumo:
Zooplankton samples were taken in five depth strata using a Multinet type Midi, with 50 µm nets. The samples were taken during the second leg only, three times at station 1, two times at station 2 and once at station 3. Zooplankton were identified to species / genus and life-stage, and at least 300 individuals were counted per sample. 10 individuals of each stage / species were measured and the numbers of eggs counted.
Resumo:
For the determination of water-soluble protein content of C. finmarchicus of the different stations the Qubit® Protein Assay Kit (Invitrogen) was used. Analysis was performed with extracts of 10 copepods. Working solution was prepared with Qubit® protein reagent and Qubit® protein buffer (1:200). 190 µL working solution was pipetted into each well of a micro plate and 10 µL of sample or Qubit® protein standard (0, 200 and 400 ng/µL) was added. Solutions were mixed and incubated for 15 min at room temperature. Measurements were conducted with a micro plate reader (TriStar LB 941, Berthold Technologies) at 485 nm excitation and 590 nm emission, using the software MikroWin2000 (Berthold Technologies).
Resumo:
Oxygen concentration and rate of change of oxygen were measured using the Unisense Oxygen Microsensor System. Water from different depth was taken from CTD attached niskin bottle. Measurements were conducted in 2 ml vials provided by Unisense and lasted for a minimum of two minutes after a stable rate was achieved. The sampling interval was 6 seconds. Transport containers, tubes and vials for measurements were covered with light proof black foil for dark-measurements.