Lithology and approximate sub-bottom depths and ages of the transition of soft to firm ooze and of firm ooze to chalk at DSDP Leg 89 and 90 Sites

Leg 90 recovered approximately 3705 m of core at eight sites lying at middle bathyal depths (1000-2200 m) (Sites 587 to 594) in a traverse from subtropical to subantarctic latitudes in the southwest Pacific region, chiefly on Lord Howe Rise in the Tasman Sea. This chapter summarizes some preliminary lithostratigraphic results of the leg and includes data from Site 586, drilled during DSDP Leg 89 on the Ontong-Java Plateau that forms the northern equatorial point of the latitudinal traverse. The lithofacies consist almost exclusively of continuous sections of very pure (>95% CaCO3) pelagic calcareous sediment, typically foraminifer-bearing nannofossil ooze (or chalk) and nannofossil ooze (or chalk), which is mainly of Neogene age but extends back into the Eocene at Sites 588, 592, and 593. Only at Site 594 off southeastern New Zealand is there local development of hemipelagic sediments and several late Neogene unconformities. Increased contents of foraminifers in Leg 90 sediments, notably in the Quaternary interval, correspond to periods of enhanced winnowing by bottom currents. Significant changes in the rates of sediment accumulation and in the character and intensity of sediment bioturbation within and between sites probably reflect changes in calcareous biogenic productivity as a result of fundamental paleoceanographic events in the region during the Neogene. Burial lithification is expressed by a decrease in sediment porosity from about 70 to 45% with depth. Concomitantly, microfossil preservation slowly deteriorates as a result of selective dissolution or recrystallization of some skeletons and the progressive appearance of secondary calcite overgrowths, first about discoasters and sphenoliths, and ultimately on portions of coccoliths. The ooze/chalk transition occurs at about 270 m sub-bottom depth at each of the northern sites (Sites 586 to 592) but is delayed until about twice this depth at the two southern sites (Sites 593 and 594). A possible explanation for this difference between geographic areas is the paucity of discoasters and sphenoliths at the southern sites; these nannofossil elements provide ideal nucleation sites for calcite overgrowths. Toward the bottom of some holes, dissolution seams and flasers appear in recrystallized chalks. The very minor terrigenous fraction of the sediment consists of silt- through clay-sized quartz, feldspar, mica, and clay minerals (smectite, illite, kaolinite, and chlorite), supplied as eolian dust from the Australian continent and by wind and ocean currents from erosion on South Island, New Zealand. Changes in the mass accumulation rates of terrigenous sediment and in clay mineral assemblages through time are related to various external controls, such as the continued northward drift of the Indo-Australian Plate, the development of Antarctic ice sheets, the increased desertification of the Australian continent after 14 m.y. ago, and the progressive increase in tectonic relief of New Zealand through the late Cenozoic. Disseminated glass shards and (altered) tephra layers occur in Leg 90 cores. They were derived from major silicic eruptions in North Island, New Zealand, and from basic to intermediate explosive volcanism along the Melanesian island chains. The tephrostratigraphic record suggests episodes of increased volcanicity in the southwest Pacific centered near 17, 13, 10, 5 and 1 m.y. ago, especially in the middle and early late Miocene. In addition, submarine basaltic volcanism was widespread in the southeast Tasman Sea around the Eocene/Oligocene boundary, possibly related to the propagation of the Southeast Indian Ridge through western New Zealand as a continental rift system.

Sedimentology of surface sediments from the continental shelf and slope off West Africa (Table 1)

Samples from sutface sediments of the shell, continental slope, and adjacent deep sea regions off West Africa between 27° N and 15° N were investigated with respect to grain size distribution of the total samples, sand contents of the acid insoluble residues, carbonate content of the total samples, and the separate grain size fractions, specific surfaces, colours and mineralogical composition of the clay fractions. The grain size distributions of the total samples of the sediments of the shelf and the continental slope off Spanish-Sahara are controlled mainly by biogenic components. The supply of terrigeneous material in this area is very low. At deeper parts of the continental slope and in the deep sea areas, the relative amounts of carbonate minerals in the sediments are considerably reduced. The prevailing sand contents of the upper slope changes into clay dominance. On the shelf of Mauritania - represented by profiles extending down to 200 m water depth - the grain size is also controlled mainly by biogenic carbonates. Nevertheless, the admixture of fossil silicate components is important, too. The southern parts of the area is investigated are located in a region influenced by sediments of the Senegal River, which especially control the contents of silt and clay. The silicate sands, predominately of quartz, are fossil and form a mixed sediment with younger deposits. The carbonate contents of the different grain size fractions are formed either by sedimentation of carbonate and silicate particles of the respective grain size or by autochtonous disintegration of coarser sediment particles, as shown by the occurence of Mg-rich calcite and especially aragonite in the clay sized fraction. In the northern parts of the area investigated, which have very minute terrigeneous supply, the latter mechanism is the dominant factor, controlling the carbonate contents of the fine grain sized fractions. In the vicinity of the mouth of the Senegal the carbonate contents are influenced by extremely high dilution with terrigencous silicates. Mg-rich calcite and aragonite are produced preferentially in shallow slope and shelf areas up to 500 m of water depth. The specific surfaces of the carbonate-free clay fractions indicate that the clay fractions of the shelfareas with little terrigenous supply consits of relatively coarser particles. Very fine particles are removed and transported towards the deep sea. Lateral differentiation of this kind was not observed in the area off Senegal. The high surface areas, characterizing the clay fractions of this region, are thought to be due to high montmorillonite contents as was found for deep seas sediments. The mineralogical composition of the clay fraction from the southern parts of the area is characterized by high kaolinite and montmorillonite contents, while in the northern illite is predominating. At least two types of montmorillionites are present: in areas influenced by the Senegal mostly one type was found, which could swell to 17; on the shelves and slopes of the other regions the montmorillonite-group is represented by a montmorillonite-mica-type mixed-layer mineral. A "glauconite", found in the sand fraction, which had very similar properties to those of the montmorillonite-mica mixed-layer, is believed to be the source of this mixed-layer-type mineral. Palygorskite is present in all samples out of range of the Senegal supply. It may be an indicator of eolian transported material. The occurence of rich palygorskit deposits in the arid hinterlands emphasizes the terrestrial origin.

Fig. 2. Lithology, water and total carbon content, cumulative grain-size distribution, and quartz, feldspar, and mica contents of core sequence Lz1013 from south-western Beaver Lake

A 100 cm long sediment sequence was recovered from Beaver Lake in Amery Oasis, East Antarctica, using gravity and piston corers. Sedimentological and mineralogical analyses and the absence of micro and macrofossils indicate that the sediments at the base of the sequence formed under glacial conditions, probably prior to c. 12 500 cal. yr BP. The sediments between c. 81 and 31 cm depth probably formed under subaerial conditions, indicating that isostatic uplift since deglaciation has been substantially less than eustatic sea-level rise and that large areas of the present-day floor of Beaver Lake must have been subaerially exposed following deglaciation. The upper 31 cm of the sediment sequence were deposited under glaciomarine conditions similar to those of today, supporting geomorphic observations that the Holocene was a period of relative sea-level highstand in Amery Oasis.

Sedimentology of the northwestern Weddel Sea continental shelf and slope

Geologie cores on two profiles oriented normaly to the continental shelf and slope, have been investigated to reconstruct the Quaternary sedimentary history of the southeast continental border of South Orkney (NW Weddell Sea). The sediments were described macroscopically and their fabric investigated by use of X-radiographs. Laboratory work comprised detailed grain-size analysis, determination of the watercontent, carbonate, organic carbon and sand fraction.composition. Stable oxygen and carbon isotopes have been measured On planktonic foraminifera. Palaeomagnetism, analysis of 230Th-content and detailed comparison of the lithlogic Parameters with the oxygen isotope stages (Martinson curve) were used for stratigraphic classification of the sediments. The sediment cores from the continental slope comprise a maximum age of 300,000 years B. P.. Bottom currents, ice rafting and biogenic input are the main sources of sediment. Based on lithologic parameters a distinction between glacial and interglacial facies is possible. Silty clays without microfossils and few bioturbation characterise the sediments of the glacial facies. Only small amounts of icerafted debris can be recognized. This type of sediment was accumulated during times of lower sea-level and drastically reduced rate of bottom water production. Based on grain-size distribution, bottom current velocities of 0.01 cmls were calculated. Thick sea-ice coverage reduced biogenic production in the surface water, and as consequence benthic communities were depleted. Because of the reduced benthic life, sediments are only slithly bioturbated. At the beginning of the interglacial Stage, the sea-level rised rapidly, and calving rate of icebergs, combined with input of ice-rafted material, increased considerably. Sediments of this transition facies are silty cliiys with a high proportion of coarse ice-rafted debris, but without microfossils. With the onset of bottom water production in connection with shelf ice water, sediments of interglacial facies were formed. They consist of silty clays to clayey silts with considerable content of sand and gravel. Sediments are strongly bioturbated. Based On the sediment caracteristics, current velocities of the bottom water were calculated to be of 0.96 cmls for interglacials. At the southern slope of a NW/SE-striking ridge, bottom water current is channelized, resulting in a drastic increase of current velocities. Current velocities up to 7.5 cm/s lead to formation of residual sediments. While the continental slope has predominantly fine sediments, the South Orkney shelf are mainly sandy silts and silty sands with a high proportion of gravel. These sediments were formed dominantly by ice-rafting during Brunhes- and Matuyama-Epoch. Currents removed the fine fraction of the sediments. Based on microfossil contents it was not possible to differentiate sediments from glacial to interglacial. In the upper Parts of the cores graded sequences truncated by erosion were observed. These sequences were formed during Brunhes-Epoch by strong currents with velocities decreasing periodically from about 7.5 cm/s to about 1 cm/s. Sediments with a high proportion of siliceous microfossils but barren of foraminifera compose the lower part of the shelf cores. These sediments have formed during the warmer Matuyama-Epoch.

Distribution of opal and quartz in surface sediments from the subtropical southeastern Pacific (Table 1)

The distribution patterns of opal and quartz on the ocean floor of the subtropical southeastern Pacific have been defined by analyzing 59 surface-sediment samples. The opal distribution resembles that of primary productivity in the surface waters, except along the Peruvian and northern Chilean coasts, where dilution reduces opal values. The distribution pattern of quartz represents both eolian and fluvial transport. Quartz distribution extends out as a tongue in the same direction and position as the prevailing southeast trade winds. Along the South American coast, high quartz concentrations are found in patches near shore and decrease rapidly seaward.

(Table 2) Grain composition of sediments from ODP Hole 161-974B and from beach samples

Miocene to Pleistocene sand and sandstone were recovered at Ocean Drilling Program Site 974 in the Tyrrhenian Basin and Sites 976 and 977 in the Alboran Basin. Sand detrital modes were determined for 45 samples from these sites, as well as 10 samples of Spanish beach sand. At Site 974, the Pleistocene section includes a number of volcaniclastic (vitric ash) and terrigenous sand layers; the latter are heterogeneous and contain sedimentary and metamorphic lithic fragments. Submarine canyon and onshore drainage patterns suggest that the most likely source of this sediment is the Tiber River drainage basin in central Italy, where a Pleistocene volcanic field is superimposed on Apennine orogenic rocks. In contrast, the Miocene sand in Unit III at Site 974 may have been derived from local basement highs. The quartzolithic composition and preponderance of metamorphic and sedimentary lithic debris in sand samples from Unit II at Site 976, Unit I at Sites 977 and 978, and Unit I at Site 979 are consistent with derivation from metamorphic rocks and sedimentary cover sequences that crop out in the Betic Cordillera of southern Spain (976-978) and in the Rif of Northern Africa (979). The sedimentary to metamorphic lithic fragment ratios in these samples reflect the relative proportion of metamorphic and sedimentary rocks exposed in onshore source terranes. In contrast, the source of the few quartzose Pleistocene sands at Site 976 was likely the Flysch Trough Units that crop out near Gibraltar. The significant volcanic component in certain intervals at Sites 976 (upper Miocene) and 977 (lower Pliocene to Miocene) is consistent with widespread volcanic activity during basin inception and development. Mean sand detrital modes for sand subgroups from both the Alboran and Tyrrhenian Basin sites plot in the Recycled Orogenic and Magmatic Arc compositional fields of Dickinson et al. (1983, doi:10.1130/0016-7606(1983)94<222:PONAPS>2.0.CO;2), reflecting the hybrid tectonic histories of these basins.

Behavior of trace elements in quartz from plutons of different geochemical signature: a case study from the Bohemian Massif, Czech Republic

Trace-element content in igneous quartz from granitoids of different geochemical types from Bohemian Massif (Central Evrope) was investigated using the laser ablation ICP-MS technique. Two laboratories (Geological Survey of Norway, Trondheim, and Institute of Geology of the Academy of Science of Czech Republic, Praha) were involved in the trace-element (Li, Be, B, Mn, Ge, Rb, Ba, Pb, Mg, Al, P, Ca, Ti, Fe, and Sn) analyses of quartz (altogether, ~300 analyses of 17 rock samples). About 200 representative analyses of quartz are given in Tables 1 and 2.

Settlement characteristics of quartz grains on certain sediment surface forms of tidal beaches along the Baltic and Wadden Sea

Sind in einem Sediment, das unter dem Einfluß einer Strömung abgelagert wurde, richtungsanzeigende Indikatoren vorhanden, so werden sie je nach den momentanen Bedingungen, die zur Zeit der Sedimentation herrschten, ein mehr oder weniger gutes Abbild der Strömungsverhältnisse liefern. Zahlreich sind Strömungsanzeiger organischen Ursprungs, wie z. B. Molluskenschalen u. a. Doch auch anorganische Partikel in Psephiten und Psammiten lassen häufig in ihrer Lagerung eine Abhängigkeit von der Strömungsrichtung erkennen: sie sind "geregelt". Die Autoren der verschiedenen Arbeiten, in denen Regelungen in klastischen Sedimenten untersucht wurden, gingen von der Tatsache aus, daß viele Sedimentpartikel statistisch gesehen keine Kugelform, sondern eine längliche Gestalt besitzen. Die langen Achsen dieser länglich geformten Sedimentkörner werden im folgenden als "Langachsen" bezeichnet. In Sanden sind es vor allem Quarzkörner von annähernd zylindrischer oder ellipsoidischer Form ("Langquarze"), die geeignet sind, durch die Lage ihrer Langachsen strömungsbedingte Regelungen anzuzeigen. Mit der Orientierung solcher Langquarze in marinen und fluviatilen Sanden haben sich bisher vorwiegend amerikanische Autoren befaßt. So untersuchten z. B. Dapples & Rominger (1945) die Sandsohle eines künstlichen Gerinnes. Sie stellten fest, daß die Hauptorientierungsrichtung der Langquarze mit der Strömungsrichtung des fließenden Wassers zusammenfiel. Dabei zeigte das spitze Ende tropfenförmiger ("polarer") Quarze stromab und das stumpfe Ende stromauf. Nanz (1955) maß die Langachsenrichtungen von Langquarzen in Sanden des nassen und trockenen Strandes von Texas und Florida und fand, daß sich diese Achsen vorwiegend parallel zur Auf- und Ablaufrichtung der Wellen und damit senkrecht zum Streichen der Strandlinie einregeln. Curray (1956 b) beobachtete die gleiche Regelung. Er wies ferner darauf hin, daß in Strandwällen und Strandhaken die bevorzugte Richtung der Langquarze senkrecht zum Streichen des Sedimentkörpers liegt. Zahlreiche weitere Autoren beschäftigten sich ebenfalls mit den Fragen der Langquarzregelung, so Schwarzacher (1951), Griffith & Rosenfeld (1953), Vollbrecht (1953), Rusnak (1956), Wendler (1956), Sriramadas (1957). Ganz allgemein war das Ergebnis aller dieser Untersuchungen, daß die aus einer Strömung abgelagerten Langquarze eine Regelung parallel zur Strömungsrichtung zeigen. Eigene Untersuchungen und Überlegungen ergaben, daß die bisher veröffentlichten Ergebnisse und die an sie angeschlossenen Vorstellungen z. T. bestätigt werden können, jedoch z. T. auch erheblich modifiziert werden müssen.

Heavy mineral and bulk mineral compositions of cores from Kumano Basin

Coring during Integrated Ocean Drilling Program Expeditions 315, 316, and 333 recovered turbiditic sands from the forearc Kumano Basin (Site C0002), a Quaternary slope basin (Site C0018), and uplifted trench wedge (Site C0006) along the Kumano Transect of the Nankai Trough accretionary wedge offshore of southwest Japan. The compositions of the submarine turbiditic sands here are investigated in terms of bulk and heavy mineral modal compositions to identify their provenance and dispersal mechanisms, as they may reflect changes in regional tectonics during the past ca. 1.5 Myrs. The results show a marked change in the detrital signature and heavy mineral composition in the forearc and slope basin facies around 1 Ma. This sudden change is interpreted to reflect a major change in the sand provenance, rather than heavy mineral dissolution and/or diagenetic effects, in response to changing tectonics and sedimentation patterns. In the trench-slope basin, the sands older than 1 Ma were probably eroded from the exposed Cretaceous-Tertiary accretionary complex of the Shimanto Belt and transported via the former course of the Tenryu submarine canyon system, which today enters the Nankai Trough northeast of the study area. In contrast, the high abundance of volcanic lithics and volcanic heavy mineral suites of the sands younger than 1 Ma points to a strong volcanic component of sediment derived from the Izu-Honshu collision zones and probably funnelled to this site through the Suruga Canyon. However, sands in the forearc basin show persistent presence of blue sodic amphiboles across the 1 Ma boundary, indicating continuous flux of sediments from the Kumano/Kinokawa River. This implies that the sands in the older turbidites were transported by transverse flow down the slope. The slope basin facies then switched to reflect longitudinal flow around 1 Ma, when the turbiditic sand tapped a volcanic provenance in the Izu-Honshu collision zone, while the sediments transported transversely became confined in the Kumano Basin. Therefore, the change in the depositional systems around 1 Ma is a manifestation of the decoupling of the sediment routing pattern from transverse to long-distance axial flow in response to forearc high uplift along the megasplay fault.

Tab. 1: Proportion of glacial quartz grains contained in the deposits

The Yari-Hotaka Mountain Range is one of the most famous formerly-glaciated areas of Japan. Many glacial landforms remain in three neighbouring U-shaped valleys, named Yarisawa, Yokoo and Migimata. Moraines and outwash terraces can be classified into four groups according to their location and to the amount of glacial quartz grains contained in the deposits. A glaciation is proved for other parts of the Northern Japanese Alps before 100 000 years B.P., but not for the Yari-Hotaka Mountain Range, because the corresponding glacial landforms cannot be found here. The oldest known Ichinomata stage before and after 60 000 years B.P. corresponds to the Yokoo glacial which is proved wirhin the whole Japanese Alps. The three younger stages, Babadaira stage (before 30 000 years B.P.), Yarisawa stage I (about 30000 years B.P.) and Yarisawa stage II (about 15000 years B.P.), belong to the Karasawa glacial. About 10 000 years B.P. the glaciers melted away. At all times the relief-influence was especially important for Ihe mass-balances of Japanese glaciers. Wind-drifted snow from the west-exposed windward slopes to the slopes in eastern (lee) exposition, and a voluminous snow accumulation by avalanches from the high rocky walls onto the glacier surfaces beneath, caused very low situated glaciers as well as low equilibrium-lines. In most cases the snow-lines were situated 100 m or more above the equilibrium-lines. During the Ichinomata stage the snow-line reached an altitude of 2400-2450 m. It rose about 100 m to the Babadaira stage, 300 m to Yarisawa stage I and about 450 m to Yarisawa stage II. At present the snow-line is situated above the Northern Japanese Alps at over 4000 m. Therefore only perennial snow-patches exist. If the snow-line would go down by a few hundred meters, this region would be highly interesting Ifor studies on the beginning of mountain glaciation.

Lithic grain and mineral composition of sand and sandstones from the North Pacific Ocean and the Bering Sea (Table 3)

Sand and sandstone compositions from different types of basins reflect provenance terranes governed by plate tectonics. One hundred and one thin sections of Upper Miocene to Holocene sand-sized material were examined from DSDP/IPOD Sites in the North Pacific Ocean and the Bering Sea. The Gazzi-Dickinson point-counting method was used to establish compositional characteristics of sands from different tectonic settings. Continental margin forearc sands from the western North America continental margin arc system are clearly different from backarc/marginal-sea sands from the Aleutian intraoceanic arc system. The forearc sands have average QFL percentages of 29-42-29, LmLvLst percentages of 32-34-34, 3 Fmwk%M and 0.82 P/F. Aleutian backarc sands have average QFL percentages of 8-22-69. LmLvLst percentages of 9-85-6, 0.5 Fmwk%M and 0.96 P/F. A trend of increasing QFL%Q and decreasing LmLvLst%Lv westward in the backarc region of the Aleutian Ridge reflects the influence of the Asiatic continental margin. Aleutian backarc sands without continental influence have average QFL percentages of 1-20-79, LmLvLst percentages of 1-98-1, 0 Fmwk%M and 0.99 P/F. Of the continental margin forearc samples, sands on the Astoria Fan (west of the Oregon-Washington trench) contain the highest LmLvLst%Lv and lowest P/F; sands from mixed transform-fault and trench settings (Delgada Fan and Gulf of Alaska samples) have slightly higher Qp/Q (0.03); and sands from the Pacific-Juan de Fuca-North America triple junction have the highest Fmwk%M. Delgada Fan and Gulf of Alaska sands have average QFL percentages of 27-38-35, LmLvLst percentages of 37-26-37, 2 Fmwk%M and 0.86 P/F. Astoria Fan sands have average QFL percentages of 35-41-24, LmLvLst percentages of 30-47-23, 3 Fmwk%M and 0.74 P/F. The triple-junction sands have average QFL percentages of 28-59-13, LmLvLst percentages of 25-26-49, 9 Fmwk%M and 0.87 P/F. The petrologic data from the modern ocean basins examined in this study can provide useful analogs for interpretation of ancient oceanic sequences. Our data suggest some refinements of, but generally substantiate, existing petrologic models relating sandstone composition to tectonic setting.

Occurrence of microtextures recorded from quartz sand grains of ODP Hole 178-1101A (Table 1)

Sediment drifts on the continental rise are located proximal to the western side of the Antarctic Peninsula and recorded changes in glacial volume and thermal regime over the last ca. 15 m.y. At Ocean Drilling Program (ODP) Site 1101 (Leg 178), which recovered sediments back to 3.1 Ma, glacial-interglacial cyclicity was identified based on the biogenic component and sedimentary structures observed in X-radiographs, magnetic susceptibility and lithofacies descriptions. Glacial intervals are dominated by fine-grained laminated mud and interglacial units consist of bioturbated muds enriched in biogenic components. From 2.2 to 0.76 Ma, planktonic foraminifera and calcareous nannofossils dominate in the interglacials suggesting a shift of the Antarctic Polar Front (APF) to the south near the drifts. Prior to 2.2 Ma, cyclicity cannot be identified and diatoms dominate the biogenic component and high percent opal suggests warmer conditions south of the APF and reduced sea ice over the drifts. Analyses of the coarse-grained terrigenous fraction (pebbles and coarse sand) from Sites 1096 and 1101 record glaciers at sea-level releasing iceberg-rafted debris (IRD) throughout the last 3.1 m.y. Analyses of quartz sand grains in IRD with the scanning electron microscope (SEM) show an abrupt change in the frequency of occurrence of microtextures at ~1.35 Ma. During the Late Pliocene to Early Pleistocene, the population of quartz grains included completely weathered grains and a low frequency of crushing and abrasion, suggesting that glaciers were small and did not inundate the topography. Debris shed from mountain peaks was transported supraglacially or englacially allowing weathered grains to pass through the glacier unmodified. During glacial periods from 1.35-0.76 Ma, glaciers expanded in size. The IRD flux was very high and dropstones have diverse lithologies. Conditions resembling those at the Last Glacial Maximum (LGM) have been episodically present on the Antarctic Peninsula since ~0.76 Ma. Quartz sand grains show high relief, fracture and abrasion common under thick ice and the IRD flux is low with a more restricted range of dropstone lithologies.