Benthic foraminifera in Northwest Indian Ocean surface sediments

The relationship between the distribution of benthic foraminifera and sediment type and depositional environment in the Arabian Sea is discussed. The benthic foraminiferal fauna were sampled in nineteen Recent surface sediment samples, and geochemical variables of the sediment of the same samples were measured. The water depths for the box core samples varies from 440 to 4040 m. A total of 103 species and six species-complexes were identified. The geochemical properties were found to correspond well to the sediment type and depositional environment and six different sediment/depositional environment types could be distinguished. Analysis of the benthic foraminiferal fauna reveals specific faunal assemblages that are closely related to these sediment/depositional environment types.

Organic geochemistry and sedimentology of lower to mid-Cretaceous at DSDP Leg 77 Holes

Analyses of 40 carbonate core samples - 27 from Site 535, 12 from Site 540, and 1 from Site 538A - have confirmed many of the findings of the Shipboard Scientific Party. The samples, all but one Early to mid-Cretaceous in age (Berriasian to Cenomanian), reflect sequences of cyclically anoxic and oxic depositional environments. They are moderately to very dark colored, dominantly planar-parallel, laminated lime mudstones. Most show the effects of intense mechanical compaction. Visual kerogen characteristics and conventional Rock-Eval parameters indicate that these deep basinal carbonates contain varying mixtures of thermally immature kerogen derived from both marine and terrigenous precursors. However, variations in kerogen chemistry are evident upon analysis of the pyrolysis mass spectral data in conjunction with the other geochemical analyses. Particularly diagnostic is the reduction index, Rl, a measure of H2S produced during pyrolysis. Total organic carbon, TOC, ranges from 0.6 to 6.6%, with an overall average of 2.4%. Average TOCs for these fine-grained mudstones are: late Eocene 2.5% (1 sample), Cenomanian 2.2% (6), Albian 2.0% (10), Aptian 1.3% (1), Barremian-Hauterivian 2.8% (11), late Valanginian 4.8% (3), Berriasian-early Valanginian 1.6% (7). Most of the carbonates have source-potential ratings of fair to very good of predominantly oil-prone to mixed kerogen, with only a few gas-prone samples. The ratings correlate well with the inferred depositional environments, i.e., whether oxic or anoxic. Several new organic-geochemical parameters, especially Rl, based on pyrolysis mass spectrometry of powdered whole-rock samples, support this view. Tar from fractures in laminated to bioturbated limestones of Unit IV (late Valanginian) at 535-58-4, 19-20 cm (530 m sub-bottom) appears to be mature, biodegraded, and of migrated rather than on site indigenous origin.

Elemental and isotopic compositions of metalliferous and pelagic sediments from the Galapagos mounds area, data of DSDP Leg 70

Nontronite, the main metalliferous phase of the Galapagos mounds, occurs at a subsurface depth of ~2-20 m; Mn-oxide material is limited to the upper 2 m of these mounds. The nontronite forms intervals of up to a few metres thickness, consisting essentially of 100% nontronite granules, which alternate with intervals of normal pelagic sediment. The metalliferous phases represent essentially authigenic precipitates, apparently formed in the presence of upwelling basement-derived hydrothermal solutions which dissolved pre-existent pelagic sediment. Electron microprobe analyses of nontronite granules from different core samples indicate that: (1) there is little difference in major-element composition between nontronitic material from varying locations within the mounds; and (2) adjacent granules from a given sample have very similar compositions and are internally homogeneous. This indicates that the granules are composed of a single mineral of essentially constant composition, consistent with relatively uniform conditions of solution Eh and composition during nontronite formation. The Pb-isotopic composition of the nontronite and Mn-oxide sediments indicates that they were formed from solutions which contained variable proportions of basaltic Pb, introduced into pore waters by basement-derived solutions, and of normal-seawater Pb. However, the Sr-isotopic composition of these sediments is essentially indistinguishable from the value for modern seawater. On the basis of 18O/16O ratios, formation temperatures of ~20-30°C have been estimated for the nontronites. By comparison, temperatures of up to 11.5°C at 9 m depth have been directly measured within the mounds and heat flow data suggest present basement-sediment interface temperatures of 15-25°C.

Permeabilities, grain size and carbon composition of sediments from ODP Hole 170-1040C and two Leg 205 holes

Constant-pressure difference and constant-flow permeability tests were conducted on core samples from Ocean Drilling Program Legs 170 and 205 from the Costa Rica subduction zone representing pelagic carbonate and hemipelagic mud lithologies. Seven whole-round core samples from Sites 1040, 1253, and 1255 were tested for vertical permeabilities. The permeabilities of the pelagic carbonate sediments range from ~4 x 10**-16 to ~1 x 10**-15 m**2. The permeabilities of the hemipelagic mud sediments vary from ~2 x 10**-18 to ~4 x 10**-18 m**2. To further characterize the sediments, grain size, total carbon, and total inorganic carbon analyses were conducted.

n-Alkanes and lignin in bottom sediments of the Norwegian Sea

Investigations of bottom sediments from the central and northern parts of the Norwegian Sea including study regions at the Storegga landslide, the Haakon Mosby mud volcano, and Knipovich Ridge were carried out. Concentration of n-alkanes in bottom sediments from these regions ranges from 0.53 to 22.1 µg/g of dry sediments that corresponds to 0.02-1.97% of Corg. Molecular composition of hydrocarbons indicates mixed allochtonous-authochtonous genesis of total organic matter (TOC) formed by hydrobiota and residuals of terrestrial plants. Terrigenous organic mater dominates in bottom sediments. Active redox, microbial and thermolytic processes of organic matter transformation take place in the sedimentary mass. Special character of chromatographic spectra of n-alkane distribution in both low and high-molecular ranges, as well as increased naphtene contents can be interpreted as a sign of oil hydrocarbon generation from maternal organic matter as a result of thermocatalytic reactions within sedimentary mass and their displacement into the upper sedimentary layers. Molecular compositions and concentrations of phenols and lignin were determined in core samples from the Norwegian Sea. Total concentration of phenols in the cores ranges from 8.1 to 101.8 (µg/g of dry sediments that corresponds to 0.15-1.15% of TOC. Lignin concentration was estimated at 21.0-459.0 µg/g of dry sediments (0.59-7.9% of ?org. Phenol compounds of p-hydroxybenzoic, vanillin, syringyl and cinnamyl families as basic components of lignin macromolecules were identified. It was found that sea currents and aerosols are the main contributors of lignin into the abyssal part of the Norwegian Sea.

Annotated record of the detailed examination of Mn and phosphate deposits from GOS74 Expedition stations

The purpose of the cruise was to map the manganese rich pavements of the Blake Plateau area which had been extensively investigated by ships of the Woods Hole Oceanographic Institution since 1956. From August until September 1965, 112 sites were sampled from R/V Gosnold on a joint USGS-WHOI expedition. At most of the stations on the Blake pavement, large slabs of manganese were recovered along with phosphate rich nodules.

Density of 9 sediment cores from the Weddell Sea

The wet bulk density is one of the most important parameters of the physical and geological properties of marine sediments. The density is connected directly with sedimentation history and a few sedirnent properties. Knowledge of the fine scale density-depth structure is the base for many model calculations, for both sedimentological and palaeoclimatic research. A density measurement system was designed and built at the Alfred Wegener Institute in Bremerhaven for measuring the wet buk density of sediment cores with high resolution in a non-destructive way. The density is deterrnined by measuring the absorption of Gamma-rays in the sediment. This principle has been used since the 50's in materials research and in the geosciences. In the present case, Cs137 is used as the radioactive source and the intensity is measured by a detector system (scintillator and photomultiplier). Density values are obtainable in both longitudinal core sections and planar cross-sections (the latter are a function of the axial rotation angle). Special studies on inhomogenity can be applied with core rotation. Detection of ice rafted debris (IRD) is made possible with this option. The processes that run the density measurement system are computer controlled. Besides the absorption measurement the core diameter at every measurement point is determined with a potentiometric system. The data values taken are stored on a personal computer. Before starting routine measurements on the sediment cores, a few experiments conceming the statistical aspects of the gamma-ray signal and its accuracy were carried out. These experiments led to such things as the optimum operational parameters. A high spatial resolution in the mm-range is possible with the 4mm-thin gamma-ray measurements. Within five seconds the wet bulk density can be deterrnined with an absolute accuracy of 1%. A comparison between data measured with the new system and conventional measurements on core samples after core splitting shows an agreement within +I- 5% for most of the values. For this thesis, density determinations were carried out on ten sediment cores. A few sediment characteristics are obtainable from using just the standard measurement results without core rotation. In addition to differentes and steps in the absolute density range, variations in the "frequency" of the density-depth structure can be detected due to the close spatial measurement interval and high resolution. Examples from measurements with small (9°) and great (90°) angle increments show that abrupt and smooth transitional changes of sedirnent layers as well as ice rafted debris of several dimensions can be detected and distiflguished clearly. After the presentation of the wet bulk density results, a comparison with data from other investigations was made. Measurements of the electrical resistivity correlated very well with the density data because both parameters are closely related to the porosity of the sedirnent. Additionally, results from measurements of the magnetic susceptibility and from ultra-sonic wave velocity investigations were considered for a integrative interpretation. The correlation of these both parameters and wet bulk density data is strongly dependent on the local (environmental) conditions. Finally, the densities were compared with recordings from sediment-echographic soundings and an X-ray computer tomography analysis. The individual results of all investigations were then finally combined into an accurate picture of the core. Problems of ambiguity, which exist when just one Parameter is determined alone, can be reduced more or less according to the number of parameters and sedimentary characteristics measured. The important role of the density data among other parameters of such an integrated interpretation is evident. Evidence of this role include the high resolution of the measurement, the excellent accuracy and the key position within methods and parameters concerning marine sediments.

(Table 2) Aragonite, high and low magnesium calcite, major elements, bioclast and planktic foraminifera from ODP Hole 133-817A

Investigation of the Middle Miocene-Pleistocene succession in cores at ODP Site 817A (Leg 133), drilled on the slope south of the Queensland Plateau, identified the various material fluxes contributing to sedimentation and has determined thereby the paleogeographic events which occurred close to the studied area and influenced these fluxes. To determine proportions of platform origin and of plankton origin of carbonate mud, two reference sediments were collected: (1) back-reef carbonate mud from the Young Reef area (Great Barrier Reef); and (2) Late Miocene chalk from the Loyalty Basin, off New Caledonia. Through their biofacies and mineralogical and geochemical characters, these reference sediments were used to distinguish the proportions of platform and basin components in carbonate muds of 25 core samples from Hole 817A. Two "origin indexes" (i1 and i2) relate the proportion in platform and basin materials. The relative sedimentation rate is inferred from the high-frequency cycles determined by redox intervals in the cores. Bulk carbonate deposited in each core has been calculated in two ways with close results: (1) from calcimetric data available in the Leg 133 preliminary reports (Davies et al., 1991); and (2) from average magnetic susceptibility of cores, a value negatively correlated to the average carbonate content. Vertical changes in sedimentation rates, in carbonate content, in origin indexes and in "linear fluxes" document the evolution of sediment origins from platform carbonates, planktonic carbonates and insoluble material through time. These data are augmented with the variations in organic-matter content through the 817A succession. The observed changes and their interpretation are not modified by compaction, and are compatible with major paleogeographic events including drowning of the Queensland Plateau (Middle Miocene-Early Pliocene) and the renewal of shallow carbonate production, (1) during the Late Pliocene, and (2) from the Early Pleistocene. The birth and growth of the Great Barrier Reef is also recorded from 0.5 Ma by a strengthening of detrital carbonate deposition and possibly by a lack of clay minerals in the 4 upper cores, a response to trapping of terrigenous material behind this barrier. In addition, a maximum of biological silica production is displayed in the Middle Miocene. These changes constrain the time of events and the sequence-stratigraphy framework some components of which are transgression surface, maximum flooding surface and low-stand turbidites. Sedimentation rates and material fluxes show cycles lasting 1.75 Myr. Whatever their origin (climatic and/or eustatic) these cycles affected the planktonic production primarily. The changes also show that major carbonate variations in the deposits are due to a dilution effect by insoluble material (clay, biogenic silica and volcanic glasses) and that plankton productivity, controlling the major fraction of carbonate sedimentation, depends principally on terrigenous supplies, but also on deep-water upwelling. Accuracy of the method is reduced by redeposition, reworking, and probable occurrence of hiatuses.

Bulk geochemistry, mass change and alteration intensity of basalts from ODP Leg 187 sites and survey dredges

Shipboard studies during Ocean Drilling Program Leg 187 (Australian Antarctic Discordance, AAD) suggested that there was no discernible coincidence between the interpreted age of rocks recovered and the intensity of alteration observed. Samples from the oldest sites occupied appeared to exhibit the least overall effects of alteration, and the intensity of alteration varied from site to site. Previous investigations of low-temperature alteration in oceanic basement samples have been restricted by the myopic perspective provided by single drill holes or dredge collections. Combining core samples from Leg 187 and dredge samples from the AAD collection at Oregon State University (USA) offers the unique opportunity to investigate mineral and bulk chemical changes attending alteration of basalt over a range of ages from 0 to 28 Ma. Results of this research indicate that there is a general increase in the intensity of alteration as the basalts age and mosve off axis, but that this relationship is somewhat veiled by the dominating control on alteration intensity dictated by variations in permeability.

Paleomagnetic properties of basalts of ODP Hole 111-504B (Table 3)

Downhole magnetic field measurements were conducted in Hole 504B on the Costa Rica Ridge during ODP Leg 111. Three magnetic groups within oceanic basement at this site are tentatively defined, based on the interval mean values of the downhole magnetic field. Statistical analyses show that there are significant differences in the inclinations of natural remanent magnetization (NRM) among the three magnetic groups. Although this could be caused by various factors, we explain the inclination difference among the three groups by simple tectonic displacements of basement by faulting after its formation, about 5.9 Ma ago. Based on the intensities of NRM and inclinations measured in the basement core samples drilled in Hole 504B on DSDP Legs 69, 70, and 83 and ODP Leg 111, the investigated section of basement formation can be divided into three or four magnetic zones that parallel the zones defined by the downhole magnetic field, alteration, and lithology. Downhole magnetic field and paleomagnetic data generally correlate positively, in spite of some discrepancies. The magnetic susceptibility values of the core samples were used to derive the insitu NRM from the downhole magnetic field data.

(Table 1) Organic geochemistry at DSDP Leg 71 Holes

Forty-three core samples from Sites 511 through 514 of DSDP Leg 71 were analyzed geochemically. The black shales at the bottom of Hole 511, in the basin province of the Falkland Plateau, contain an average of 1590 ppm extractable organic matter (EOM) and 120 ppm hydrocarbons. Whereas molecular type-carbon number distributions of mono- and polynuclear aromatic hydrocarbons and their sulphur and oxygen analogues in the black shale "aromatic hydrocarbon" fractions are very similar to those of many crude oils, other data - gas chromatography (GC) fingerprint, pyrolysis GC, visual kerogen analysis, H/C ratio - suggest the black shale section is thermally immature. Together, these observations imply that many of the hydrocarbons were deposited with the original sediments or are diagenetic products of other biological compounds. Pyrograms of the humic acid and kerogen fractions from the black shale interval are typical of geopolymers derived from marine algal material. It appears that these humic acids and kerogens are derived from the same lipid stock.

(Table 1) Pigments isolated from DSDP Leg 56 Holes

A relatively well documented record of intermediate and late chlorophyll diagenesis in marine sediments now exists. Intermediate diagenetic stages include conversion of chlorins to DPEP-series porphyrins and subsequent chelation with nickel, vanadyl, and, in special cases, copper. Increasing thermal stress leads to etio-series generation and transalkylation (Baker, 1969; Baker and Smith, 1975; Baker et al., 1977; Palmer and Baker, in press). In contrast, the early transformations of clorophyll are still largely unknown. Very early diagenetic reactions must certainly include loss of magnesium, deesterification, decarboxylation, reduction of ring-conjugating groups, and finally, oxidative-aromatization of carbons 7 and 8 in ring IV to yield free-base porphyrins (Baker and Smith, 1973; Smith and Baker, 1974). Chlorins (7,8-dihydroporphyrins) are very difficult to isolate and identify, because of hydrocarbon impurities which absorb in the blue to violet region of the electromagnetic spectrum and which co-chromatograph with the pigments. Further complications possibly can arise from artifact formation during isolation. In the present study, twelve DSDP Leg 56 core samples, ranging in sub-bottom depth from 4 to 420 meters and in age from Pleistocene to middle Miocene, were analyzed for tetrapyrrole pigments. Chlorins, in concentrations ranging from about 4 to less than 0.002 µg/g sediment, wet weight, were the only tetrapyrroles found. A carotenoid (tetraterpene) was isolated from Section 434-1-3.

Lithology, mineralogy and geochemistry of ODP Hole 118-735B and 176-735B respectively

Ocean Drilling Program (ODP) Hole 735B, located on Atlantis Bank on the Southwest Indian Ridge, penetrated 1508 meters below seafloor with an average recovery of 87%, providing a nearly continuous sample of a significant part of oceanic Layer 3. Based on variations in texture and mineralogy, 12 major lithologic units are recognized in the section, ranging from 39.5 to 354 m thick. The principal lithologies include troctolite, troctolitic gabbro, olivine gabbro and microgabbro, gabbro, gabbronorite and Fe-Ti oxide gabbro, gabbronorite, and microgabbro. Highly deformed mylonites, cataclasites, and amphibole gneisses are locally present, as are small quantities of pyroxenite, anorthositic gabbro, and trondhjemite. Downhole variations in mineral composition, particularly for olivine and clinopyroxene, show a number of cyclic variations. Plagioclase compositions show the widest variations and correspond to different degrees of deformation and alteration as well as primary processes. Downhole chemical variations correspond reasonably well with variations in mineral compositions. Iron and titanium mainly reflect the presence of Fe-Ti oxide gabbros but show some cyclical variations in the lower part of the core where oxide gabbros are sparse. CaO is highly variable but shows a small but consistent increase downhole. MgO is more uniform than CaO and shows a very small downward increase. Sulfur and CO2 contents are generally low, but S shows significant enrichment in lithologic Unit IV, which consists of Fe-Ti oxide gabbro, reflecting the presence of sulfide minerals in the sequence. The lithologic, mineralogical, and geochemical data provided here will allow detailed comparisons with ophiolite sections as well as sections of in situ ocean crust drilled in the future.