X-ray fluorescence scanning of discrete samples on the Schwalbenberg II loess-paleosol sequence, raw data, magnetic susceptibility, organic carbon and U-ratio as grainsize index

The Schwalbenberg II loess-paleosol sequence (LPS) denotes a key site for Marine Isotope Stage (MIS 3) in Western Europe owing to eight succeeding cambisols, which primarily constitute the Ahrgau Subformation. Therefore, this LPS qualifies as a test candidate for the potential of temporal high-resolution geochemical data obtained X-ray fluorescence (XRF) scanning of discrete samplesproviding a fast and non-destructive tool for determining the element composition. The geochemical data is first contextualized to existing proxy data such as magnetic susceptibility (MS) and organic carbon (Corg) and then aggregated to element log ratios characteristic for weathering intensity [LOG (Ca/Sr), LOG (Rb/Sr), LOG (Ba/Sr), LOG (Rb/K)] and dust provenance [LOG (Ti/Zr), LOG (Ti/Al), LOG (Si/Al)]. Generally, an interpretation of rock magnetic particles is challenged in western Europe, where not only magnetic enhancement but also depletion plays a role. Our data indicates leaching and top-soil erosion induced MS depletion at the Schwalbenberg II LPS. Besides weathering, LOG (Ca/Sr) is susceptible for secondary calcification. Thus, also LOG (Rb/Sr) and LOG (Ba/Sr) are shown to be influenced by calcification dynamics. Consequently, LOG (Rb/K) seems to be the most suitable weathering index identifying the Sinzig Soils S1 and S2 as the most pronounced paleosols for this site. Sinzig Soil S3 is enclosed by gelic gleysols and in contrast to S1 and S2 only initially weathered pointing to colder climate conditions. Also the Remagen Soils are characterized by subtle to moderate positive excursions in the weathering indices. Comparing the Schwalbenberg II LPS with the nearby Eifel Lake Sediment Archive (ELSA) and other more distant German, Austrian and Czech LPS while discussing time and climate as limiting factors for pedogenesis, we suggest that the lithologically determined paleosols are in-situ soil formations. The provenance indices document a Zr-enrichment at the transition from the Ahrgau to the Hesbaye Subformation. This is explained by a conceptual model incorporating multiple sediment recycling and sorting effects in eolian and fluvial domains.

Grain size composition and age of ODP Hole 167-1017E sediments

Siliciclastic sedimentation at Ocean Drilling Program Site 1017 on the southern slope of the Santa Lucia Bank, central California margin, responded closely to oceanographic and climatic change over the past ~130 ka. Variation in mean grain-size and sediment sorting within the ~25-m-thick succession from Hole 1017E show Milankovitch-band to submillenial-scale variation. Mean grain size of the "sortable silt" fraction (10-63 µm) ranges from 17.6 to 33.9 µm (average 24.8 µm) and is inversely correlated with the degree of sorting. Much of the sediment has a bimodal or trimodal grain-size distribution that is composed of distinct fine silt, coarse silt to fine sand, and clay-size components. The position of the mode and the sorting of each component changes through the succession, but the primary variation is in the presence or abundance of the coarse silt fraction that controls the overall mean grain size and sorting of the sample. The occurrence of the best-sorted, finest grained sediment at high stands of sea level (Holocene, marine isotope Substages 5c and 5e) reflect the linkage between global climate and the sedimentary record at Site 1017 and suggest that the efficiency of off-shelf transport is a key control of sedimentation on the Santa Lucia Slope. It is not clear what proportion of the variation in grain size and sorting may also be caused by variations in bottom current strength and in situ hydrodynamic sorting.

Mineralogy, and composition of turbidites and background samples at ODP Sites 166-1003 and 166-1007

The lower slope and toe-of-slope sediments of the western flank of the Great Bahama Bank (Sites 1003 and 1007) are characterized by an intercalation of turbidites and periplatform ooze. In general, turbidites form up to 12% of the total mass of the sedimentary column. Based primarily on data from the Bahamas, it has been postulated that steep-sided carbonate platforms shed most of their sediments into the basin during sea-level highstands when the platforms are flooded. This highstand shedding is assumed to be less pronounced along platforms with a ramp-like depositional profile where sediment production is not restricted to sea-level highstand. Miocene to Pliocene sediments recovered in five drill holes during Leg 166 at the western margin of the Great Bahama Bank reveal that turbidite distribution follows a complex pattern that is dependent on several factors such as sedimentation rates, sea-level changes, and slope morphology. To identify the depositional sequences in the cores, the depths of seismic-sequence boundaries were used. The distribution of turbidites within sedimentary sequences varies strongly. Generally, turbidites are clustered at the upper and/or lower portions of the sequences indicating deposition of carbonate turbidites during both highstand and lowstand of sea level. Analyses of the Miocene turbidites show that (1) during high sea level, 60% of all turbidites were deposited at Site 1003 (309 out of 518 turbidites), while during low sea level, two thirds of all turbidites were deposited at Site 1007 (332 out of 486 turbidites); (2) the average thickness of highstand turbidites is 1.5 times higher than the average thickness of lowstand turbidites; and (3) the turbidites display slight differences in composition and sorting. In general, highstand turbidites are less sorted and contain an abundant amount of shallow-water constituents such as green algae, red algae, shallow-water benthic foraminifers (miliolids), and intraclasts. The lowstand turbidites are better sorted and contain abundant planktonic foraminifers and micrite. To complicate matters, highstand and lowstand turbidites seem to be deposited at different locations on the slope. At the lower slope (Site 1003), more turbidites were deposited during highstands, while at the toe of the slope, turbidites were dominantly deposited during sea-level lowstands. The result is a slope section with laterally discontinuous turbidite lenses within periplatform ooze, which is controlled by the interplay of sea-level changes, sediment production, and platform morphology.

Grains size and components distribution in turbidite layesr of ODP Leg 101

Textural and compositional differences were found between gravity-flow sheets in an open-ocean environment on the northern slope of Little Bahama Bank (Site 628, Pliocene turbidite sequence) and in a closed-basin depositional setting (Site 632, Quaternary turbidite sequence). Mud-supported debris-flow sheets were cored at Site 628. Average mean grain size of the turbidite samples was lower, mud content was higher, and sorting was poorer than in comparable samples from Site 632. This reflects the deposition of proximal, low-energy turbidity currents and debris flows on a base-ofslope carbonate apron. No mud-supported debris-flow sheets were deposited in the investigated sediment sequence of Hole 632A. Many larger turbidity currents from around the margins of Exuma Sound may have reached this central basin setting, depositing sediments that had been transported over longer distances. Planktonic components dominate in the grain-sized fraction (500-1000 µm) of turbidite samples from Hole 628A, while platform detritus is rare. We interpreted this as resulting from the erosion and reworking of a large area of open-ocean slope sediments by gravity flows. In contrast, large amounts of benthic and platform components were found in the turbidite samples of Hole 632A. This may be explained by the fact that the slopes of the enclosed Exuma Sound are steep, and turbidity currents bypassed much of these slopes through pronounced channels, delivering more shallow-water detritus to the deep basin. Erosion of slope sediments, a possible source area of planktonic detritus, is assumed to be low. The small slope area in relation to the larger surrounding platform areas and lower production of planktonic components in the enclosed waters of Exuma Sound may also explain the observed low number of planktonic components at Hole 632A. Turbidite material from both open-ocean and enclosed-basin environments was deposited at Site 635.

Bottom sediment of the Western Baltic Sea - sheet Darß

The sheet "Darß" of the Western Baltic sediment distribution map displays several features of the late- and postglacial sediments in the area between 54°00? and 54°30? northern latitude and 12°00? and 13°00? eastern longitude on a scale of 1: 100,000. The main map shows the surface deposits in this area. Special attention is given to a detailed presentation of the granulometric characteristics of the sandy sedimens which are prevailing here. For this purpose a new way of visualization of grain size data was developed. Six insets provide information on water depth, positions of the sampling sites, areal distribution of median and sorting of sands, depth of the till surface thickness of the late- and postglacial sediments on top of the uppermost till and the bathymetry.

(Table 2) Sorting and mineral composition of sediment obtained near Sylt, North Sea

Carefully selected sea bottom surface fine sand samples were studied from two sand ribbons normal to the shore. Possible sediment transport along these sand ribbons were investigated from interpretation of the sediment patterns. Simple grain size parameters were obtained and results of heavy mineral and feldspar analysis were compared. On one ribbon offshore sediment movement was indicated, while conversely on the other, onshore movement is proposed.

Results of the sorting of the mikronekton and zooplankton material sampled by the German Antarctic Expedition 1975/1976

A description is given of the taxa sorted out of the zooplanktion and mikronekton material of the 1st German Antarctic Expedition 1975/76 by the Kiel sorting center. The methods employed in the sorting center are describined in detail. Notes for further use of the material are also given.

Description and chemical composition of ferromanganese deposits from Trout Lake, northern Wisconsin

Sediments were collected with Eckman and Petersen dredges from the bottom of Trout Lake, northern Wisconsin, at 221 stations. Sampling was done with a spud sampler at 32 stations, and core samples were obtained with a Jenkins and Mortimer and a Twenhofel sampler at 17 stations. The shore and offshore deposits of the shores of Trout Lake and the shores of the islands are described. Megascopic descriptions are given of the samples collected with the Eckman and Petersen dredges. Sediments on bottoms of about 10 meters or deeper are mainly gyttja, or crusts composed of mixtures of organic matter, ferric hydroxide, and some form of manganese oxide. The latter deposits are extensive. Detailed descriptions of some of the samples of sands are given, and generalizations respecting size and distribution are made. Tables showing quartiles, medians, and coefficients of sorting and skewness of the coarse sediments collected from the bottom are given in tables. Mechanical analyses of all fine sediments, mainly gyttja, were not made, as previous experience seems to have demonstrated that results have no sedimentational value. Organic matter of the gyttja was determined and also the percentages of lignin in the organic matter. Core samples are composed almost entirely of fine materials, mainly gyttja, and determinations were made on these samples in the same way as on the samples obtained with the Eckman and Petersen dredges. Studies of the core samples show that the fine sediments usually contain in excess of 90 per cent moisture and there is very little change in the moisture content from top to bottom of cores. A map shows the distribution of the iron and manganese deposits. These deposits were found to contain 10 to 20 per cent of organic matter, 11 to 16 per cent of metallic iron, and 12 to 30 per cent of metallic manganese. No stratification of any kind was found in any of the deep-water sediments of Trout Lake except in the iron and manganese crusts. Absence of stratification is considered to be due to the slow rate of deposition and the mixing of sediments by organisms which dwell in them. The data indicate that the rate of deposition in the deep waters of Trout Lake is of the order of 1 foot in 15,000 years.

Clay mineralogy and multi-element chemistry of surface sediments on the Aiberian-Arctic Shelf

Clay mineral and bulk chemical (Si, Al, K, Mg, Sr, La, Ce, Nd) analyses of terrigenous surface sediments on the Siberian-Arctic shelf indicate that there are five regions with distinct, or endmember, sedimentary compositions. The formation of these geochemical endmembers is controlled by sediment provenance and grain size sorting. (1) The shale endmember (Al, K and REE rich sediment) is eroded from fine-grained marine sedimentary rocks of the Verkhoyansk Mountains and Kolyma-Omolon superterrain, and discharged to the shelf by the Lena, Yana, Indigirka and Kolyma Rivers. (2) The basalt endmember (Mg rich) originates from NE Siberia's Okhotsk-Chukotsk volcanic belt and Bering Strait inflow, and is prevalent in Chukchi Sea Sediments. Concentrations of the volcanically derived clay mineral smectite are elevated in Chukchi fine-fraction sediments, corroborating the conclusion that Chukchi sediments are volcanic in origin. (3) The mature sandstone endmember (Si rich) is found proximal to Wrangel Island and sections of the Chukchi Sea's Siberian coast and is derived from the sedimentary Chukotka terrain that comprises these landmasses. (4) The immature sandstone endmember (Sr rich) is abundant in the New Siberian Island region and reflects inputs from sedimentary rocks that comprise the islands. (5) The immature sandstone endmember is also prevalent in the western Laptev Sea, where it is eroded from sedimentary deposits blanketing the Siberian platform that are compositionally similar to those on the New Siberian Islands. Western Laptev can be distinguished from New Siberian Island region sediments by their comparatively elevated smectite concentrations and the presence of the basalt endmember, which indicate Siberian platform flood basalts are also a source of western Laptev sediments. In certain locations grain size sorting noticeably affects shelf sediment chemistry. (1) Erosion of fines by currents and sediment ice rafting contributes to the formation of the coarse-grained sandstone endmembers. (2) Bathymetrically controlled grain size sorting, in which fines preferentially accumulate offshore in deeper, less energetic water, helps distribute the fine-grained shale and basalt endmembers. An important implication of these results is that the observed sedimentary geochemical endmembers provide new markers of sediment provenance, which can be used to track sediment transport, ice-rafted debris dispersal or the movement of particle-reactive contaminants.