Tab 1-4 Weight and volume reduction as well as surface subsidence during abrasion experiments

Antarctic land surfaces in South Victoria Land, all without a covering of vegetation, are actively formed by winds which often reach velocities of more than 100 km/h. Consequently, deflation and abrasion are essential factors in the process of slope formation. Water erosion, active only during the very short summer period, is limited to a few localities in South Victoria Land. Experiments in a wind tunnel proved that ventifacts in the Dry Valleys can be formed within a few decades or at the most, a few centuries. Yearly corrasion rates average around a maximum of a few millimeters. Considerable variability is caused by the different exposures of ventifacts within the micro relief end the varying resistance of the rocks. The importance of ice crystals (snow) for abrasion processes should not be overestimated.

Age determinations from Bykovsky Peninsula, Siberia

A wide variety of environmental records is necessary for analysing and understanding the complex Late Quaternary dynamics of permafrost-dominated Arctic landscapes. A NE Siberian periglacial key region was studied in detail using sediment records, remote sensing data, and terrain modelling, all incorporated in a geographical information system (GIS). The study area consists of the Bykovsky Peninsula and the adjacent Khorogor Valley in the Kharaulakh Ridge situated a few kilometres southeast of the Lena Delta. In this study a comprehensive cryolithological database containing information from 176 sites was compiled. The information from these sites is based on the review of previously published borehole data, outcrop profiles, surface samples, and our own field data. These archives cover depositional records of three periods: from Pliocene to Early Pleistocene, the Late Pleistocene and the Holocene. The main sediment sequences on the Bykovsky Peninsula consist of up to 50 m thick ice-rich permafrost deposits (Ice Complex) that were accumulated during the Late Pleistocene. They were formed as a result of nival processes around extensive snowfields in the Kharaulakh Ridge, slope processes in these mountains (such as in the Khorogor Valley), and alluvial/proluvial sedimentation in a flat accumulation plain dominated by polygonal tundra in the mountain foreland (Bykovsky Peninsula). During the early to middle Holocene warming, a general landscape transformation occurred from an extensive Late Pleistocene accumulation plain to a strongly thermokarst-dominated relief dissected by numerous depressions. Thermokarst subsidence had an enormous influence on the periglacial hydrological patterns, the sediment deposition, and on the composition and distribution of habitats. Climate deterioration, lake drainage, and talik refreezing occurred during the middle to late Holocene. The investigated region was reached by the post-glacial sea level rise during the middle Holocene, triggering thermo-abrasion of ice-rich coasts and the marine inundation of thermokarst depressions.

(Table 1) Frequency of wind direction reportings and duration of wave action in Mittelgrund, Eckernfoerder Bay, Germany

A detailed survey of the Mittelgrund in Eckernförde Bay shows slope breaks at 10-12 m and 15-16 m water depth. They are thought to be mainly the result of marine abrasion. Utilizing records from the Edgerton mud-penetrator, a map of holocene sediment thickness has been drawn. From the pattern of bottom echos 4 types of stratification can be recognized. An interpretation of them is attempted, as they are supposed to serve as models for other transgression contacts.

Mechanical behavior of ODP Hole 137-504B basalts

Core samples of basalt collected from Hole 504B during Leg 137 were investigated regarding their mechanical behavior. The rock samples were measured for hardness, compression strength, and modulus of elasticity. Abrasion loss of weight and Shore sclerometer methods were used for determining hardness. Static and dynamic methods were used for calculating modulus of elasticity. Test results were compared with shipboard measurements of ultrasonic velocity and dry-bulk density. Test results were interpreted statistically to provide data not only on mechanical behavior changes of the rock but also on the precision of the methods used.

(Table 1) Sea level during storm surges at various sites along the german Baltic Sea coast

A seawall was constructed in 1897 along the steep coast of Streckelsberg, Usedom Island to stop the cliff retreat. It was destroyed several times by storm induced sea floods, reconstructed and gradually extended to a length of 450 m. After the severe storm event of 1/2.3.1949, no more repair work was implemented. The ruins were no longer capable of preventing further erosion of the Streckelsberg cliff. A new protective structure became a necessity against ongoing erosion, and to check the lowering of the abrasion platform. The construction of three breakwaters began in 1995. A severe storm occurred on 3/4.11.1995 before their completion. Coastal bottom sediment mapping using a sidescan-sonar carried out two days later showed that a channel system down to a depth of 1.5 m was cut into the sand layer covering the sea floor on both sides of the Koserow Bank. The bottom of these channels was paved with gravel and boulders. This layer was encountered in the whole surveyed area below a mobile sand layer. Discharged bodies of fine sand half a meter high and erosional cavities several m2 in diameter around boulders led to the conclusion that an intensive sediment movement down to a depth of 11 m had taken place during the storm. A storm related direction of sediment discharge could not be identified. The existing section of the breakwaters withstood the severe storm.

Fragmentation and dissolution of benthic foraminifera in Kiel Bight, Baltic Sea, Germany

Early diagenetic ultrastructural alterations of benthic foraminifers of the genera Elphidium and Ophthalmina from the shallow water sediments of the Kiel Bight were investigated by scanning electron microscopy. Pure solution patterns were deduced from supplementary experiments.//Several carbonate destroying processes can be specified by ultrastructural patterns of the shell surfaces. Based on these patterns three zones are established, each showing different mechanisms of shell fragmentation: 1) zone of abrasion, 2) zone of disintegration, 3) zone of corrosion. This zonation depends on the water depth and is caused primarily by water agitation and by under saturation of the bottom water with respect to carbonate.

(Table 1) Calcium carbonate content of boulder clays sampled along the baltic coast of Schleswig-Holstein, Germany

The carbonate contents in the boulder clay ('Geschiebemergel') of abrasion cliffs were investigated along the Baltic coast of Schleswig-Holstein, northern West Germany. The calcareous boulder clay and stratified drift in the cliffs are interbedded with compressed thrust sheets of Cretaceous limestone, Tertiary Tarras clay, and Eemian clay. According to chemical analyses of 173 boulder clay samples, the amount of carbonate varies mostly between 6 and 17%. Owing to the small number of samples no definite conclusion could be drawn on the distribution of Danish Cretaceous limestones in the boulder clay, nor on the different directions of movement of Weichselian glaciers.

Magnetic and gravity measurements on North-South profiles across the Grosse Meteor Bank, North Atlantic

During the first section of the "Meteor" cruise No. 2 a profile was run from the Azores to the south across the flanks of the Mid-Atlantic Ridge with a chain of seamounts. The profile extended between the Cruiser (living) and the Hyeres seamounts, which, according to our soundings, form a connected massif, and across the centre of the Grosse Meteor Bank (30°N, 28.5 °W). These seamounts rise from a depth of more than 4000 m up till close to the surface of the sea forming there a large almost flat plateau. In the case of the Grosse Meteor Bank, this plateau has a N-S extension of approx. 30 nautical miles and an E-W extension of approx. 20 nautical miles and reaches a height of 275 m in water depth. The gravity measurements yielded a density of the topographic masses of 2.6 g/cm**3 for the Grosse Meteor Bank. Magnitude and shape of the measured free-air anomaly are very well shown in a model computation with this density. The theoretical gravity effects of the seismically detected swell of cristalline rock and of the Moho depression (mountain root) are not indicated by the observational data. It can, therefore, be assumed that the latter two neutralize each other. It seems, accordingly, that there is no local isostatic compensation of the topographic masses. Hence, the density of 2.6 g/cm**3 obtained would be about the true density of rock. In connection with the mean velocity of P waves (Aric et al., 1968) obtained by seismic refraction methods it must be concluded that the material of the 1200-4000 m thick surface layer of the Grosse Meteor Bank consists of consolidated sediments. This finding is supported by the total intensity of the Earth's magnetic field over the Grosse Meteor Bank. On the assumption of a homogeneous magnetization in the direction of the present Earth's field, the computed anomaly of the massif deviates considerably from the measured anomaly while the magnetic field of the seismically detected crystalline body is capable of interpreting the observed data. Deviating from the prevailing interpretation of the seamounts' plateau as a volcanic cone with submarine abrasion, the Grosse Meteor Bank and the seamounts in the vicinity are assumed to be of continental origin. The questions whether these seamounts submerged later on or whether the sealevel has risen subsequently are, therefore, largely nonexistent.

Grain size distributions of the Bossons glacier (France)

The study presented in this PhD memory aim at better define and quantify the present timeerosion processes in glacial and proglacial domain. The Glacier des Bossons, situated in theMont-Blanc massif (Haute-Savoie, France), is a good example of a natural and nonanthropizedsystem which allows us to study this topic. This glacier lies on two mainlithologies (the Mont-Blanc granite and the metamorphic bedrock) and this peculiarity is usedto determine the origin of the glacial sediments. The sediments were sampled at the glaciersurface and at the glacier sole and also in the subglacial streams in order to understand themechanisms of mechanical erosion and particle transportation in glacial domain. The study ofthe granulometric distribution and the origin of the sediments were performed by a lithologicanalysis at macro-scale (naked-eye) and a geochemical analysis at micro-scale (U-Pb datingof zircons). These analyses allowed specifying the characteristics of glacial erosion andtransport. (1) the supraglacial sediments derived from the erosion of the rocky valley sides aremainly coarse and the glacial transport does not mix these clasts with those derived from thesub-glacial erosion, except in the lower tongue; (2) the sub-glacial erosion rates areinhomogeneous, erosion under the temperate glacier (0.4-0.8 mm/yr) is at least sixteen timesmore efficient than the erosion under the cold glacier (0.025-0.05 mm/yr); (3) the sub-glacialsediments contain a silty and sandy fraction, resulting from processes of abrasion andcrushing, which is evacuated by sub-glacial streams. The high-resolution temporal acquisitionof hydro-sedimentary data during the 2010 melt season, between the May 5th and theSeptember 17th, allowed defining the seasonal behavior of the hydrologic and sedimentaryfluxes. The sediment exportation occurs mainly during the melt season therefore, quantify thesediment fluxes in the Bossons stream and measure regularly the topographic evolution of thefluvio-glacial system allows to perform a sedimentary balance of the erosion of glacial andnon-glacial domains. During the year 2010, about 3000 tons of sediments were eroded with430 tons settled on the fluvio-glacial system. By analyzing the evolution of suspendedparticulate matter concentrations in the Bossons stream upstream and downstream the fluvioglacialsystem, the part of glacial erosion and non-glacial denudation in the sedimentarybalance could be proportioned. The erosion during the stormy events of the uncoveredmoraines, confining the fluvio-glacial system of the Bossons stream, furnishes at least 59% ofthe sediments exported by the Bossons stream and glacial erosion (41% of the flux) istherefore less efficient comparatively. The long-term evolution of the glacial systems inperiod of global warming would show a sustained erosion of proglacial environments(mountain sides and moraines) recently exposed and therefore an increasing of the detritalfluxes. The Glacier des Bossons protects the summit of the Mont-Blanc, the differentialerosion between zones under the ice and non-glacial could lead to an increase of thedifference of altitude between valleys and summits.

Sulfur-isotope analyses of gypsium samples from the Southeast Greenland margin, southern Alaska and Gulf of Alaska (Table 1)

Gypsum grains were identified in Miocene-Pleistocene sediment cores from two deep-water ODP sites, Site 918 off the SE Greenland margin and Site 887 in the Gulf of Alaska, and in Holocene sediment cores from shallow-water localities in Disenchantment Bay and Muir Inlet in southern Alaska. Although initial morphologic and textural observations suggested a complex system in which the gypsum may have had more than one origin, quantitative sulfur isotope analyses of the gypsum provide evidence of its detrital nature. d34S values in gypsum from southern Alaska range between +0.0 and +7.1 per mil. Gypsum has d34S values between -27.1 and -27.5 per mil in the Gulf of Alaska and values between -28.5 and +0.2 per mil off the SE Greenland margin. All of these isotopic signatures are too highly depleted in d34S to have precipitated from seawater, present or past. In addition there is no significant change in d34S values for gypsum crystals with differing physical characteristics (abraded vs. unabraded) from the same stratigraphic horizon, suggesting all the gypsum is detrital regardless of the degree of abrasion. The isotopic and physical evidence, in combination with the onshore geology the environmental setting, and site characteristics of the gypsum-bearing marine localities, lead us to propose that the ultimate source of the gypsum is precipitation from freeze-induced terrestrial sediment or soil brines. Furthermore the combined evidence suggests that the subsequent occurrence of gypsum in glacimarine sediments results from ice-rafting (by icebergs or sea ice) of the frozen regolith and/or, in the proximal glacimarine setting of southern Alaska, very rapid burial via turbidity currents.

Tab. 3: Differentiation of eroded material in the Arctic Russian Seas

Volumes of Holocene (10 000 years) terrigenous sediments and annnal sediment supply in the Laptev Sea were evaluated from average thickness of the Holocene veneer. Volumes of deposits supplied from various sediment sourees and by different proeesses (abrasion of hinterland and island shores, river discharge, eolian input, drifting ice) were diseriminating of deposition in the eoastal zone, at river/sea barrier, and in the shelf basin itself. Accumulation by drifting iee and the role of local sea bottom erosion were also considered. Total amount of sediments transported from the Laptev Sea shelf to Amundsen and Nansen Basins of the Aretie Ocean was compared with other Russian Aretie seas.

Morphology and surface texture of quartz grains from ODP Site 105-645

The shapes and surface textures of sand-sized quartz grains from the sediments cored at Site 645 in southern Baffin Bay during ODP Leg 105 were studied to characterize the terrigenous materials and the settling processes involved in the deposition of these sediments. Here, we show a homogeneous sand fraction that results from mixing grains from various provenances. The characteristics inherited from terrestrial processes (varying degrees of wear; fluviatile, aeolian, and diagenetic features) dominate the characteristics that result from evolution in a high-energy marine environment. Thus, the influence of the last stage of sedimentation in a deep-marine environment was difficult to distinguish. However, fluctuations in the relative proportions of particular features reveal that the terrigenous material derived from sedimentary formations of Baffin Island and East Greenland or from direct abrasion of the crystalline shield, which changed through time as the dominant settling processes evolved. In particular, this study confirms the onset of major ice rafting as old as late Miocene.