Magma-Driven Multiple Dike Propagation and Fracture Toughness of Crustal Rocks

Dike swarms consisting of tens to thousands of subparallel dikes are commonly observed at Earth's surface, raising the possibility of simultaneous propagation of two or more dikes at various stages of a swarm's development. The behavior of multiple propagating dikes differs from that of a single dike owing to the interacting stress fields associated with each dike. We analyze an array of parallel, periodically spaced dikes that grow simultaneously from an overpressured source into a semi-infinite, linear elastic host rock. To simplify the analysis, we assume steady state (constant velocity) magma flow and dike propagation. We use a perturbation method to analyze the coupled, nonlinear problem of multiple dike propagation and magma transport. The stress intensity factor at the dike tips and the opening displacements of the dike surfaces are calculated. The numerical results show that dike spacing has a profound effect on the behavior of dike propagation. The stress intensity factors at the tips of parallel dikes decrease with a decrease in dike spacing and are significantly smaller than that for a single dike with the same length. The reduced stress intensity factor indicates that, compared to a single dike, propagation of parallel dikes is more likely to be arrested under otherwise the same conditions. It also implies that fracture toughness of the host rock in a high confining pressure environment may not be as high as inferred from the propagation of a single dike. Our numerical results suggest fracture toughness values on the order of 100 MPa root m. The opening displacements for parallel dikes are smaller than that for a single dike, which results in higher magma pressure gradients in parallel dikes and lower flux of magma transport.

Lithothamnion Prolifer Foslie: A Common Non-Geniculate Coralline Alga (Rhodophyta: Corallinaceae) from the Tropical and Subtropical Indo-Pacific

A little-known, but ecologically important non-geniculate coralline, Lithothamnion prolifer, is recorded from a number of tropical Indo-Pacific sites, including Fiji, Australia, Kiribati and Indonesia. The species occurs primarily on vertical walls of caves and overhangs in Fiji and Australia, but was also found as rhodoliths in Kiribati. Lithothamnion prolifer is characterized by the combination of characters which follow. The thallus is extremely glossy, smooth, and rosy coloured. Thalli usually produce complanate protuberances, but protuberances become terete when growing on well lit, horizontal substrata, when unattached, or when growing on loose substrata. Conceptacles occur mainly on the tips of protuberances, and tetra/bisporangial conceptacles are large (to 1300 mu m external diameter, with chambers up to 1100 mu m diameter). The tetra/bisporangial conceptacles are flush or only slightly raised, and often extensive and irregularly shaped (resembling small sori). They lack a raised rim, and have flattened pore plates. The rosette cells surrounding the tetra/bisporangial pore appear somewhat sunken below the surrounding roof cells in SEM, and the cells of filaments lining the pore canals of tetra/bisporangial conceptacles do not differ from the cells of filaments making up the rest of the roof. Old conceptacles persist and become buried in the thallus, and are then usually completely filled in by irregularly arranged calcified cells.

Deformation Studies of Tungsten-Gold Contacts at the Nanometer Scale.

The deformation behavior of atomically clean, nanometer sized tungsten / gold contacts was studied at room temperature in ultra-high vacuum. An instrument that combines atomic force microscopy (AFM), scanning tunneling microscopy (STM), and field ion microscopy (FIM) into a single experimental apparatus was designed, constructed, and calibrated. A cross-hair force sensor having a spring constant of - 442 N/m was developed and its motion was monitored during indentation experiments with a differential interferometer. Tungsten tips of controlled size (12.8 nm < tip radius < 2 1.6 nm) were first shaped and characterized using FIM and then indented into a Au (1 10) single crystal to depths ranging from 1.5 nrn to 18 nm using the force sensor. Continuum mechanics models were found to be valid in predicting elastic deformation during initial contact and plastic zone depths despite our small size regime. Multiple discrete yielding events lasting < 1.5 ms were observed during the plastic deformation regime; at the yield points a maximum value for the principal shear stress was measured to be 5 + 1 GPa. During tip withdrawal, "pop-out" events relating to material relaxation within the contact were observed. Adhesion between the tip and sample led to experimental signatures that suggest neck formation prior to the break of contact. STM images of indentation holes revealed various shapes that can be attributed to the (1 1 1 ) (1 10) crystallographic slip system in gold. FIM images of the tip after indentation showed no evidence of tip damage