A comparison of worker risk of injury while working on fully automated side loaders and other residential collection trucks at a large solid waste collection company

The study aim was to determine whether using automated side loader (ASL) trucks in higher proportions compared to other types of trucks for residential waste collection results in lower injury rates (from all causes). The primary hypothesis was that the risk of injury to workers was lower for those who work with ASL trucks than for workers who work with other types of trucks used in residential waste collection. To test this hypothesis, data were collected from one of the nation’s largest companies in the solid waste management industry. Different local operating units (i.e. facilities) in the company used different types of trucks to varying degrees, which created a special opportunity to examine refuse collection injuries and illnesses and the risk reduction potential of ASL trucks.^ The study design was ecological and analyzed end-of-year data provided by the company for calendar year 2007. During 2007, there were a total of 345 facilities which provided residential services. Each facility represented one observation.^ The dependent variable – injury and illness rate, was defined as a facility’s total case incidence rate (TCIR) recorded in accordance with federal OSHA requirements for the year 2007. The TCIR is the rate of total recordable injury and illness cases per 100 full-time workers. The independent variable, percent of ASL trucks, was calculated by dividing the number of ASL trucks by the total number of residential trucks at each facility.^ Multiple linear regression models were estimated for the impact of the percent of ASL trucks on TCIR per facility. Adjusted analyses included three covariates: median number of hours worked per week for residential workers; median number of months of work experience for residential workers; and median age of residential workers. All analyses were performed with the statistical software, Stata IC (version 11.0).^ The analyses included three approaches to classifying exposure, percent of ASL trucks. The first approach included two levels of exposure: (1) 0% and (2) >0 - <100%. The second approach included three levels of exposure: (1) 0%, (2) ≥ 1 - < 100%, and (3) 100%. The third approach included six levels of exposure to improve detection of a dose-response relationship: (1) 0%, (2) 1 to <25%, (3) 25 to <50%, (4) 50 to <75%, (5) 75 to <100%, and (6) 100%. None of the relationships between injury and illness rate and percent ASL trucks exposure levels was statistically significant (i.e., p<0.05), even after adjustment for all three covariates.^ In summary, the present study shows that there is some risk reduction impact of ASL trucks but not statistically significant. The covariates demonstrated a varied yet more modest impact on the injury and illness rate but again, none of the relationships between injury and illness rate and the covariates were statistically significant (i.e., p<0.05). However, as an ecological study, the present study also has the limitations inherent in such designs and warrants replication in an individual level cohort design. Any stronger conclusions are not suggested.^

Texas electronics waste management: A policy analysis for the 21st century

Electronic waste is a fairly new and largely unknown phenomenon. Accordingly, governments have only recently acknowledged electronic waste as a threat to the environment and public health. In attempting to mitigate the hazards associated with this rapidly growing toxic waste stream, governments at all levels have started to implement e-waste management programs. The legislation enacted to create these programs is based on extended producer responsibility or EPR policy. ^ EPR shifts the burden of final disposal of e-waste from the consumer or municipal solid waste system to the manufacturer of electronic equipment. Applying an EPR policy is intended to send signals up the production chain to the manufacturer. The desired outcome is to change the methods of production in order to reduce production outputs/inputs with the ultimate goal of changing product design. This thesis performs a policy analysis of the current e-waste policies at the federal and state level of government, focusing specifically on Texas e-waste policies. ^ The Texas e-waste law known, as HB 2714 or the Texas Computer TakeBack Law, requires manufacturers to provide individual consumers with a free and convenient method for returning their used computers to manufacturers. The law is based on individual producer responsibility and shared responsibility among consumer, retailers, recyclers, and the TCEQ. ^ Using a set of evaluation criteria created by the Organization for Economic Co-operation and Development, the Texas e-waste law was examined to determine its effectiveness at reducing the threat of e-waste in Texas. Based on the outcomes of the analysis certain recommendations were made for the legislature to incorporate into HB 2714. ^ The results of the policy analysis show that HB 2714 is a poorly constructed law and does not provide the desired results seen in other states with EPR policies. The TakeBack Law does little to change the collection methods of manufacturers and even less to change their production habits. If the e-waste problem is to be taken seriously, HB 2714 must be amended to reflect the proposed changes in this thesis.^

Environmental sustainability and the human element: Decision making in National Cancer Institute-designated cancer centers and Practice Greenhealth subscribing institutions

Background. Various aspects of sustainability have taken root in the hospital environment; however, decisions to pursue sustainable practices within the framework of a master plan are not fully developed in National Cancer Institute (NCI) -designated cancer centers and subscribing institutions to the Practice Greenhealth (PGH) listserv.^ Methods. This cross sectional study was designed to identify the organizational characteristics each study group pursed to implement sustainability practices, describe the barriers they encountered and reasons behind their choices for undertaking certain sustainability practices. A web-based questionnaire was pilot tested, and then sent out to 64 NCI-designated cancer centers and 1638 subscribing institutions to the PGH listserv.^ Results. Complete responses were received from 39 NCI-designated cancer centers and 58 subscribing institutions to the PGH listserv. NCI-designated cancer centers reported greater progress in integrating sustainability criteria into design and construction projects than hospitals of institutions subscribing to the PHG listserv (p-value = <0.05). Statistically significant differences were also identified between these two study groups in undertaking work life options, conducting energy usage assessments, developing energy conservation and optimization plans, implementing solid waste and hazardous waste minimization programs, using energy efficient vehicles and reporting sustainability progress to external stakeholders. NCI-designated cancer centers were further along in implementing these programs (p-value = <0.05). In comparing the self-identified NCI-designated cancer centers to centers that indicated they were both and NCI and PGH, the later had made greater progress in using their collective buying power to pursue sustainable purchasing practices within the medical community (p-value = <0.05). In both study groups, recycling programs were well developed.^ Conclusions. Employee involvement was viewed as the most important reason for both study groups to pursue recycling initiatives and incorporated environmental criteria into purchasing decisions. A written sustainability commitment did not readily translate into a high percentage that had developed a sustainability master plan. Coordination of sustainability programs through a designated sustainability professional was not being undertaken by a large number of institutions within each study group. This may be due to the current economic downturn or management's attention to the emerging health care legislation being debated in congress. ^ Lifecycle assessments, an element of a carbon footprint, are seen as emerging areas of opportunity for health care institutions that can be used to evaluate the total lifecycle costs of products and services.^

STRATEGIES FOR THE TRANSFER OF APPROPRIATE TECHNOLOGY TO DEVELOPING COUNTRIES: THE IMPLEMENTATION AND DEVELOPMENT OF ENVIRONMENTAL HEALTH PROGRAMS IN TUNISIA

This dissertation focuses on Project HOPE, an American medical aid agency, and its work in Tunisia. More specifically this is a study of the implementation strategies of those HOPE sponsored projects and programs designed to solve the problems of high morbidity and infant mortality rates due to environmentally related diarrheal and enteric diseases. Several environmental health programs and projects developed in cooperation with Tunisian counterparts are described and analyzed. These include (1) a paramedical manpower training program; (2) a national hospital sanitation and infection control program; (3) a community sewage disposal project; (4) a well reconstruction project; and (5) a solid-waste disposal project for a hospital.^ After independence, Tunisia, like many developing countries, encountered several difficulties which hindered progress toward solving basic environmental health problems and prompted a request for aid. This study discusses the need for all who work in development programs to recognize and assess those difficulties or constraints which affect the program planning process, including those latent cultural and political constraints which not only exist within the host country but within the aid agency as well. For example, failure to recognize cultural differences may adversely affect the attitudes of the host staff towards their work and towards the aid agency and its task. These factors, therefore, play a significant role in influencing program development decisions and must be taken into account in order to maximize the probability of successful outcomes.^ In 1969 Project HOPE was asked by the Tunisian government to assist the Ministry of Health in solving its health manpower problems. HOPE responded with several programs, one of which concerned the training of public health nurses, sanitary technicians, and aids at Tunisia's school of public health in Nabeul. The outcome of that program as well as the strategies used in its development are analyzed. Also, certain questions are addressed such as, what should the indicators of success be, and when is the time right to phase out?^ Another HOPE program analyzed involved hospital sanitation and infection control. Certain generic aspects of basic hospital sanitation procedures were documented and presented in the form of a process model which was later used as a "microplan" in setting up similar programs in other Tunisian hospitals. In this study the details of the "microplan" are discussed. The development of a nation-wide program without any further need of external assistance illustrated the success of HOPE's implementation strategies.^ Finally, although it is known that the high incidence of enteric disease in developing countries is due to poor environmental sanitation and poor hygiene practices, efforts by aid agencies to correct these conditions have often resulted in failure. Project HOPE's strategy was to maximize limited resources by using a systems approach to program development and by becoming actively involved in the design and implementation of environmental health projects utilizing "appropriate" technology. Three innovative projects and their implementation strategies (including technical specifications) are described.^ It is advocated that if aid agencies are to make any progress in helping developing countries basic sanitation problems, they must take an interdisciplinary approach to progrm development and play an active role in helping counterparts seek and identify appropriate technologies which are socially and economically acceptable. ^