RELATIONSHIP OF MOUSE IMMUNOGLOBULIN GENES TO INVERTED REPETITIVE DNA SEQUENCES

The purpose of this study was to examine the relationship of immunoglobulin genes, more specifically the C regions, to the inverted repetitive sequences found in the mouse genome. Total mRNA as well as mRNA for light chain kappa was purified from mouse plasmacytoma MOPC 321 cells. Complementary DNA molecules were synthesized from the mRNA templates and hybridized to DNA fractionated on hydroxyapatite columns. This fractionation separates DNA according to the presence of inverted repetitive sequences which will be retained by hydroxyapatite while the remaining fraction will be unbound.^ The results obtained during the course of this investigation suggested the following conclusions. Firstly, it was shown that inverted sequences were not found within the transcribed DNA region. Secondly, inverted sequences are not found within the kappa gene. And finally, it was shown that the inverted sequences may not be representative of all the sequences found in MOPC 321 DNA. ^

RANGE ADAPTIVE PROTON THERAPY FOR PROSTATE CANCER

Purpose: The rapid distal falloff of a proton beam allows for sparing of normal tissues distal to the target. However proton beams that aim directly towards critical structures are avoided due to concerns of range uncertainties, such as CT number conversion and anatomy variations. We propose to eliminate range uncertainty and enable prostate treatment with a single anterior beam by detecting the proton’s range at the prostate-rectal interface and adaptively adjusting the range in vivo and in real-time. Materials and Methods: A prototype device, consisting of an endorectal liquid scintillation detector and dual-inverted Lucite wedges for range compensation, was designed to test the feasibility and accuracy of the technique. Liquid scintillation filled volume was fitted with optical fiber and placed inside the rectum of an anthropomorphic pelvic phantom. Photodiode-generated current signal was generated as a function of proton beam distal depth, and the spatial resolution of this technique was calculated by relating the variance in detecting proton spills to its maximum penetration depth. The relative water-equivalent thickness of the wedges was measured in a water phantom and prospectively tested to determine the accuracy of range corrections. Treatment simulation studies were performed to test the potential dosimetric benefit in sparing the rectum. Results: The spatial resolution of the detector in phantom measurement was 0.5 mm. The precision of the range correction was 0.04 mm. The residual margin to ensure CTV coverage was 1.1 mm. The composite distal margin for 95% treatment confidence was 2.4 mm. Planning studies based on a previously estimated 2mm margin (90% treatment confidence) for 27 patients showed a rectal sparing up to 51% at 70 Gy and 57% at 40 Gy relative to IMRT and bilateral proton treatment. Conclusion: We demonstrated the feasibility of our design. Use of this technique allows for proton treatment using a single anterior beam, significantly reducing the rectal dose.

Influence of blood contamination on bond strength of a self-etching system.

OBJECTIVES: To detect the influence of blood contamination (BC) on the bond strength (BS) of a self-etching bonding system (SES) to enamel and dentine. METHODS: 25 human molars were longitudinally sectioned on the mesio-distal axis in order to obtain 50 specimens, which were embedded in acrylic resin. At first, the specimens were ground to expose a flat surface of enamel, and a bond strength test was performed. Afterwards, the samples were ground again in order to obtain a flat surface of dentine. Ten groups (total: n=100) were assigned according to substrate (enamel and dentine), step in the bonding sequence when contamination occurred (before the acidic primer and after the bonding resin), and contamination treatment (dry or rinse and dry procedure). Fresh human blood was introduced either before or after SES application (Clearfil SE Bond) and treated with air drying, or by rinsing and drying following application. Composite resin (Filtek Z-250,3M ESPE) was applied as inverted, truncated cured cones that were debonded in tension. RESULTS: The mean tensile BS values (MPa) for enamel/dentine were 19.4/23.0 and 17.1/10.0 for rinse-and-dry treatment (contamination before and after SES, respectively); while the measurements for the dry treatment, 16.2/23.3 and 0.0/0.0 contamination before and after SES, respectively. CONCLUSIONS: It was determined that blood contamination impaired adhesion to enamel and dentine when it occurred after bond light curing. Among the tested contamination treatments, the rinse-and-dry treatment produced the highest bond strength with BC after SES application, but it was not sufficient to recover the BS in the contamination-free group.

Quantification of the spatiotemporal microstructural organization of the human brain association, projection and commissural pathways across the lifespan using diffusion tensor tractography.

Using diffusion tensor tractography, we quantified the microstructural changes in the association, projection, and commissural compact white matter pathways of the human brain over the lifespan in a cohort of healthy right-handed children and adults aged 6-68 years. In both males and females, the diffusion tensor radial diffusivity of the bilateral arcuate fasciculus, inferior longitudinal fasciculus, inferior fronto-occipital fasciculus, uncinate fasciculus, corticospinal, somatosensory tracts, and the corpus callosum followed a U-curve with advancing age; fractional anisotropy in the same pathways followed an inverted U-curve. Our study provides useful baseline data for the interpretation of data collected from patients.

Defining the regions of homology between human chromosome 16p12--13 and mouse chromosomes

In this study, the evolutionary relationship between human chromosome 16p12-p13 and mouse chromosomes was investigated by determining the order of marker loci in the region and then identifying the chromosomal locations of the homologous loci in mice. Eighteen genes from human 16 were mapped to fifteen subchromosomal regions by a variety of mapping approaches.^ Thirteen of the genes were mapped in the mouse. Linkage analysis with backcross mice and segregation analysis in a mouse - Chinese Hamster Ovary (CHO) somatic cell hybrid panel informative for different regions of mouse genome were used. The results assigned the thirteen genes to three different mouse chromosomes.^ A group of six genes on mouse 16 was found to be closely linked to Scid. The order of Myh11 and Mrp remains ambiguous since no recombination was detected in backcross analysis. Their relative position in human is also uncertain since they were shown to be very close to each other. For the other mouse loci, an unambiguous gene order could be determined and was found to be identical to that in human. Therefore, they comprise a new conserved linkage group between the two species. The orientation of the group was inverted relative to the centromeres, i.e. the proximal loci in one species become distal in another. The size of the group was estimated to be from 4.4 to 8 Mb and 10 to 32 cM in human. In mouse, it was about 21 cM in the backcross analysis. The two boundaries of the conserved linkage were defined within a 1 Mb range. It is now possible to predict the locations of mouse homologs for some human disease genes based on their locations on human 16p.^ The six human 16p genes that map to MMU7 showed a different gene order in mouse than in human. No recombination was found between Crym and Umod while Crym was distal to D16S79A and proximal to D16S92. The location of Stp and Cdr2 with respect to the above four loci was not determined since they were not mapped in the same set of backcross mice. These genes greatly expanded an existing conserved synteny group between the human 16p12-p13 region and the MMU7. It now consists of eleven loci that span a region of probably more than 10 Mb in human. The gene order derived from this study provided further evidence for chromosomal rearrangements within the conserved synteny. (Abstract shortened by UMI.) ^

Protein-protein interaction between phototaxis receptor sensory Rhodopsin I and its transducer HtrI

The molecular complex containing the seven transmembrane helix photoreceptor S&barbelow;ensory R&barbelow;hodopsin I&barbelow; (SRI) and transducer protein HtrI (H&barbelow;alobacterial Transducer for SRI&barbelow;) mediates color-sensitive phototaxis responses in the archaeon Halobacterium salinarum. Orange light causes an attractant response by a one-photon reaction and white light (orange + UV light) a repellent response by a two-photon reaction. Three aspects of SRI-HtrI structure/function and the signal transduction pathway were explored. First, the coupling of HtrI to the photoactive site of SRI was analyzed by mutagenesis and kinetic spectroscopy. Second, SRI-HtrI mutations and suppressors were selected and characterized to elucidate the color-sensing mechanism. Third, the signal relay through the transducer-bound histidine kinase was analyzed using an in vitro reconstitution system with known and newly identified taxis components. ^ Twenty-one mutations on HtrI were introduced by site-directed mutagenesis. Several replacements of charged residues perturbed the photochemical kinetics of SRI which led to the finding of a cluster of residues at the membrane/cytoplasm interface in HtrI electrostatically coupled to the photoactive site of SRI. We found by laser-flash kinetic spectroscopy that the transducer and these residues have specific effects on the light-induced proton transfer between the retinal chromophore and the protein. ^ One of the mutations showed an unusual mutant phenotype we called “inverted” signaling, in which the cell produces a repellent response to normally attractant light. Therefore, this mutant (E56Q of HtrI) had lost the color-discrimination by the SRI-HtrI complex. We used suppressor analysis to better understand the phenotype. Certain suppressors resulted in return of attractant responses to orange light but with inversion of the normally repellent response to white light to an attractant response. To explain this and other results, we formulated the Conformational Shuttling model in which the HtrI-SRI complex is poised in a metastable equilibrium of two conformations shifted in opposite directions by orange and white light. We tested this model by behavioral analysis (computerized cell tracking and motion study) of double mutants of inverting and suppressing mutations and the results confirmed the equilibrium-shift explanation. ^ We developed an in vitro system for measuring the effect of purified transducer on the histidine-kinase CheAH that controls the flagellar motor switch. The rate of kinase autophosphorylation was stimulated >2 fold in the reconstitution of the complete signal transduction system from purified components from H. salinarum. The in vitro assay also showed that the kinase activity was reduced in the absence and in the presence of high levels of linker protein CheWH. (Abstract shortened by UMI.) ^

Variables affecting the stability of multiple cloning sites and hairpin structures in retroviral vectors

Retroviruses are RNA viruses that replicate through a double-stranded DNA intermediate. The viral enzyme reverse transcriptase copies the retroviral genomic RNA into this DNA intermediate through the process of reverse transcription. Many variables can affect the fidelity of reverse transcriptase during reverse transcription, including specific sequences within the retroviral genome. ^ Previous studies have observed that multiple cloning sites (MCS) and sequences predicted to form stable hairpin structures are hotspots for deletion during retroviral replication. The studies described in this dissertation were performed to elucidate the variables that affect the stability of MCS and hairpin structures in retroviral vectors. Two series of retroviral vectors were constructed and characterized in these studies. ^ Spleen necrosis virus-based vectors were constructed containing separate MCS insertions of varying length, orientation, and symmetry. The only MCS that was a hotspot for deletion formed a stable hairpin structure. Upon more detailed study, the MCS previously reported as a hotspot for deletion was found to contain a tandem linker insertion that formed a hairpin structure. Murine leukemia virus-based vectors were constructed containing separate sequence insertions of either inverted repeat symmetry (122IR) that could form a hairpin structure, or little symmetry (122c) that would form a less stable structure. These insertions were made into either the neomycin resistance marker ( neo) or the hygromycin resistance marker (hyg) of the vector. 122c was stable in both neo and hyg, while 122IR was preferentially deleted in neo and was remarkably unstable in hyg. ^ These results suggest that MCS are hotspots for deletion in retroviral vectors if they can form hairpin structures, and that hairpin structures can be highly unstable at certain locations in retroviral vectors. This information may contribute to improved design of retroviral vectors for such uses as human gene therapy, and will contribute to a greater understanding of the basic science of retroviral reverse transcription. ^

Role of phosphatidylethanolamine in the function and assembly of phenylalanine-specific permease of Escherichia coli

Transmembrane segments of polytopic membrane proteins once inserted are generally considered stably oriented due to the large free energy barrier for topological reorientation of adjacent extra-membrane domains. However, proper topology and function of the polytopic membrane protein lactose permease (LacY) of Escherichia coli is dependent on the membrane phospholipid composition revealing topological dynamics of transmembrane domains (Bogdanov, M., Heacock, P. N., and Dowhan, W. (2002) EMBO J. 21, 2107–2116). The high affinity phenylalanine permease PheP shares many topological similarities with LacY. In this study, mutant E. coli cells lacking phosphatidylethanolamine (PE) as a membrane component were used to evaluate the role of PE in the function and assembly of PheP. Active transport of phenylalanine by cells lacking PE was severely inhibited (both Vmax and Km were altered), whereas the PheP protein level in membranes was unaffected. Cysteine residues were introduced into predicted periplasmic or cytoplasmic segments of cysteine-less PheP, and the topology of the protein was explored using a membrane-impermeable thiol-specific biotinylated probe. Based on the biotinylation patterns of PheP in whole cells, the N-terminus and adjoining transmembrane hairpin of PheP adopted an inverted topological orientation in PE-lacking cells. Introduction of PE following the assembly of PheP triggered a reorientation of the N-terminus and adjacent hairpin to their native orientation associated with regain of wild type transport function. These results coupled with the results for LacY support a specific role for membrane lipid composition in determining topological organization and function of membrane proteins. Several other secondary symporters are compromised for activity in PE-lacking cells suggesting that lipid-assisted topogenesis is a general property of such transporters. The reversible orientation of these secondary transport proteins in response to a change of phospholipid composition might be a result of inherent conformational flexibility necessary for transport function or during protein assembly. ^

Lipid-dependent topogenesis and function of membrane proteins

Membranes are essential for the integrity and function of the cell. The collective property of the lipid bilayer is critical in providing an optimal functioning environment for membrane proteins. The simple yet well-characterized bacterium Escherichia coli serves an ideal model system to study the function of specific lipids since its lipid content can be easily manipulated. The most abundant lipid in E. coli membrane is phosphatidylethanolamine (PE, 70-80%). A PE-lacking E. coli mutant displays a complex mixture of deficient phenotypes, suggesting a profound role for PE in different aspects of cell function. A novel role of PE as a topological and functional determinant for membrane proteins has been established using lactose permease (LacY) as a model protein. PE is found to be required for energy-dependent uphill transport process of LacY. In PE-lacking membranes, LacY undergoes a dramatic conformational change, and the first half of the protein adopts an inverted topology with respect to the bilayer plane. ^ The work reported here was initiated to understand the molecular properties of lipids that enable their function as topological and functional determinants for membrane proteins. A glycolipid, monoglucosyldiacylglycerol (MGlcDAG) which shares physicochemical similarities with PE, was introduced to PE-lacking E. coli membranes. The introduction of MGlcDAG suppresses many of the PE-deficient phenotypes, and in particular supports the function and native topology of LacY. ^ The lipid-sensitive topogenic signals encoded in the amino acid sequence of LacY were also identified. Native LacY adopts an inverted topology when synthesized without PE, but mutation of specific acidic residues in the cytoplasmic extra-membrane domains can prevent this inversion and supports a native topological organization of LacY in PE-lacking membranes. These results suggest that it is the interplay between the collective charge properties of the lipid bilayer and extra-membrane loops of protein that determines the final orientation of transmembrane domains. By comparing the similarities as well as differences between these two lipids, we established how specific physical and chemical properties of lipids influence various cell functions and elucidated the molecular basis for the novel role of lipids in determining membrane protein topology. ^

Development and Characterization of an in vitro Four-species Anaerobic Dental Biofilm Model

Dental caries is the most common chronic disease worldwide. It is characterized by the demineralization of tooth enamel caused by acid produced by cariogenic dental bacteria growing on tooth surfaces, termed bacterial biofilms. Cariogenesis is a complex biological process that is influence by multiple factors and is not attributed to a sole causative agent. Instead, caries is associated with multispecies microbial biofilm communities composed of some bacterial species that directly influence the development of a caries lesion and other species that are seemingly benign but must contribute to the community in an uncharacterized way. Clinical analysis of dental caries and its microbial populations is challenging due to many factors including low sensitivity of clinical measurement tools, variability in saliva chemistry, and variation in the microbiota. Our laboratory has developed an in vitro anaerobic biofilm model for dental carries to facilitate both clinical and basic research-based analyses of the multispecies dynamics and individual factors that contribute to cariogenicity. The rational for development of this system was to improve upon the current models that lack key elements. This model places an emphasis on physiological relevance and ease of maintenance and reproducibility. The uniqueness of the model is based on integrating four critical elements: 1) a biofilm community composed of four distinct and representative species typically associated with dental caries, 2) a semi-defined synthetic growth medium designed to mimic saliva, 3) physiologically relevant biofilm growth substrates, and 4) a novel biofilm reactor device designed to facilitate the maintenance and analysis. Specifically, human tooth sections or hydroxyapatite discs embedded into poly(methyl methacrylate) (PMMA) discs are incubated for an initial 24 hr in a static inverted removable substrate (SIRS) biofilm reactor at 37°C under anaerobic conditions in artificial saliva (CAMM) without sucrose in the presence of 1 X 106 cells/ml of each Actinomyces odontolyticus, Fusobacterium nucleatum, Streptococcus mutans, and Veillonella dispar. During days 2 and 3 the samples are maintained continually in CAMM with various exposures to 0.2% sucrose; all of the discs are transferred into fresh medium every 24 hr. To validate that this model is an appropriate in vitro representation of a caries-associated multispecies biofilm, research aims were designed to test the following overarching hypothesis: an in vitro anaerobic biofilm composed of four species (S. mutans, V. dispar, A. odontolyticus, and F. nucleatum) will form a stable biofilm with a community profile that changes in response to environmental conditions and exhibits a cariogenic potential. For these experiments the biofilms as described above were exposed on days 2 and 3 to either CAMM lacking sucrose (no sucrose), CAMM with 0.2% sucrose (constant sucrose), or were transferred twice a day for 1 hr each time into 0.2% sucrose (intermittent sucrose). Four types of analysis were performed: 1) fluorescence microscopy of biofilms stained with Syto 9 and hexidium idodine to determine the biofilm architecture, 2) quantitative PCR (qPCR) to determine the cell number of each species per cm2, 3) vertical scanning interferometry (VSI) to determine the cariogenic potential of the biofilms, and 4) tomographic pH imaging using radiometric fluorescence microscopy after exposure to pH sensitive nanoparticles to measure the micro-environmental pH. The qualitative and quantitative results reveal the expected dynamics of the community profile when exposed to different sucrose conditions and the cariogenic potential of this in vitro four-species anaerobic biofilm model, thus confirming its usefulness for future analysis of primary and secondary dental caries.

Breast cancer -specific activation of topoisomerase IIalpha and its application in the tumor -targeting gene therapy

To ensure the success of systemic gene therapy, it is critical to enhance the tumor specificity and activity of the promoter. In the current study, we identified the breast cancer-specific activity of the topoisomerase IIα promoter. We further showed that cdk2 and cyclin A activate topoisomerase IIα promoter in a breast cancer-specific manner. An element containing an inverted CCAAT box (ICB) was shown to respond this signaling. When the ICB-harboring topoisomerase IIα minimal promoter was linked with an enhancer sequence from the cytomegalovirus immediate early gene promoter (CMV promoter), this composite promoter, CT90, exhibited activity comparable to or higher than the CMV promoter in breast cancer cells in vitro and in vivo, yet expresses much lower activity in normal cell lines and normal organs than the CMV promoter. A CT90-driven construct expressing BikDD, a potent pro-apoptotic gene, was shown to selectively kill breast cancer cells in vitro and to suppress mammary tumor development in an animal model of intravenously administrated, liposome-delivered gene therapy. Expression of BikDD was readily detectable in the tumors but not in the normal organs of CT90-BikDD-treated animals. Finally, we demonstrated that CT90-BikDD treatment potentially enhanced the sensitivity of breast cancer cells to chemotherapeutic agents, especially doxorubicin and taxol. The results indicate that liposomal CT90-BikDD is a novel and effective systemic breast cancer-targeting gene therapy, and its combination with chemotherapy may further improve the current adjuvant therapy for breast cancer. ^