In vitro staining effects of stannous fluoride and sodium fluoride on ceramic material.

STATEMENT OF PROBLEM: Long-term fluoride application on the teeth of patients receiving radiation therapy for head and neck tumors results in excessive staining and roughening of ceramic restorations. PURPOSE: The purpose of this in vitro study was to compare the staining effects of 2 fluoride treatments on ceramic disks by simulating 1 year of clinical exposure at 10 minutes per day. In addition, 2 different surface preparations were tested. MATERIAL AND METHODS: Eighty ceramic disks (IPS Empress), 20 x 2 mm, were fabricated. Half of the disks were glazed, and the remaining disks were polished. All disks were brushed for 3 minutes with a soft-bristle power toothbrush and mild dentifrice (baseline) and were immersed in 1 of the 2 fluoride products (0.4% SnF(2), Gel-Kam Gel, or 1.1% NaF, Prevident 5000) for 10 days (n=20). Means and standard deviations of color change (Delta E), surface roughness (Ra, um), and surface gloss (GU) of the ceramic material were measured with a reflection spectrophotometer, a profilometer, and a gloss meter, respectively, at baseline and after fluoride treatment. Two- and 3-way ANOVA (alpha=.05), with surface preparation (polished vs. glazed) and fluoride treatment (0.4% SnF(2) or 1.1% NaF) as independent variables and condition (baseline vs. after fluoride treatment) as a repeated measure, was used to analyze the data. Fisher's PLSD intervals (alpha=.05) were calculated for comparisons among the means. RESULTS: The polished specimens had significantly higher Delta E values, significantly higher surface gloss values, and significantly lower surface roughness values than the glazed specimens before fluoride treatment (P<.001). After both fluoride treatments, ceramic disks exhibited significantly higher surface roughness values when polished and significantly lower surface gloss values when glazed or polished (P<.001). The glazed specimens presented significantly higher surface roughness (P<.001) and lower surface gloss values (P<.001) when treated with 0.4% SnF(2) as compared to NaF. For the polished specimens, there was no significant difference in surface roughness and surface gloss values between the 2 fluoride treatments. CONCLUSIONS: Use of 0.4% SnF(2) and 1.1% NaF gels, in vitro, caused significant color change in the polished IPS Empress ceramic disks. Polishing of the ceramic surface before immersion in either fluoride agent caused the ceramic tested to be more resistant to etching by the 2 solutions tested. The NaF caused less deterioration of the porcelain surface and was less stain inducing than SnF(2).

Fast magnetic resonance temperature imaging for focused ultrasound thermal therapy

The current standard for temperature sensitive imaging using magnetic resonance (MR) is 2-D, spoiled, fast gradient-echo (fGRE) phase-difference imaging exploiting temperature dependent changes in the proton resonance frequency (PRF). The echo-time (TE) for optimal sensitivity is larger than the typical repetition time (TR) of an fGRE sequence. Since TE must be less than TR in the fGRE sequence, this limits the technique's achievable sensitivity, spatial, and temporal resolution. This adversely affects both accuracy and volume coverage of the measurements. Accurate measurement of the rapid temperature changes associated with pulsed thermal therapies, such as high-intensity focused ultrasound (FUS), at optimal temperature sensitivity requires faster acquisition times than those currently available. ^ Use of fast MR acquisition strategies, such as interleaved echo-planar and spiral imaging, can provide the necessary increase in temporal performance and sensitivity while maintaining adequate signal-to-noise and in-plane spatial resolution. This research explored the adaptation and optimization of several fast MR acquisition methods for thermal monitoring of pulsed FUS thermal therapy. Temperature sensitivity, phase-difference noise and phase-difference to phase-difference-to noise ratio for the different pulse sequences were evaluated under varying imaging parameters in an agar gel phantom to establish optimal sequence parameters for temperature monitoring. The temperature sensitivity coefficient of the gel phantom was measured, allowing quantitative temperature extrapolations. ^ Optimized fast sequences were compared based on the ability to accurately monitor temperature changes at the focus of a high-intensity focused ultrasound unit, volume coverage, and contrast-to-noise ratio in the temperature maps. Operating parameters, which minimize complex phase-difference measurement errors introduced by use of the fast-imaging methods, were established. ^

The role of suppressor factors in the regulation of immune responses by ultraviolet radiation -induced suppressor T lymphocytes

The purpose of these studies was to determine the role of suppressor factors (TsF) in the regulation of immune responses by ultraviolet radiation-induced suppressor T lymphocytes (Ts). The Ts were induced following epicutaneous sensitization with contact allergens to an unirradiated site on mice irradiated five days earlier with 40 kJ/m$\sp2$ UVB (280-320 nm) radiation. The spleens of such mice contain afferent, hapten-specific, Thy-1$\sp+$, Lyt-1$\sp+$,2$\sp-$ Ts that suppress in vivo contact hypersensitivity (CHS) and antibody responses and the in vitro generation of cytotoxic T lymphocytes (CTL). Four approaches were used to determine the role of TsF. First, lysates produced from sonically-disrupted Ts were injected i.v. into normal animals; they inhibited CHS in vivo in a nonspecific manner. The lysates suppressed the induction and elicitation of CHS, and they inhibited the in vitro generation of CTL. Lysates prepared from splenocytes obtained from unirradiated mice or UV-irradiated, unsensitized mice failed to inhibit either response. Second, supernatants from cultures containing Ts, normal syngeneic responder lymphocytes, and hapten-modified stimulator cells were injected i.v. into normal recipients. They inhibited the induction of CHS and did so in a hapten-specific manner. Cellular and kinetic requirements were observed for the generation of suppressive activity. Splenocytes from mice treated with Ts supernatants suppressed CHS when transferred into normal animals. The supernatants also suppressed the in vitro generation of specific CTL. Third, the TsF-specific B16G monoclonal antibody was tested for its ability to modulate the effects of UV radiation in vivo. The i.v. injection of B16G into UV-irradiated mice reduced the suppression of CHS. Splenocytes of B16G-treated mice transferred into normal recipients, and they suppressed CHS, indicating that the Ts were not depleted. Fourth, B16G was used to isolate a putative TsF by antibody immunoadsorbance. When the B16G-bound fraction was eluted and injected i.v. into normal animals, it suppressed CHS and represented a 900-fold enrichment of activity over the starting material, based on specific activity. By SDS-PAGE, the B16G-bound material contained nondisulfide-linked 45- and 50-kDa components. These results suggest that TsF may play an immunoregulatory role in CHS. The isolation of a UV radiation-induced TsF lends credence to the involvement of such molecules. ^