Tailored instructional methods for students with diverse levels of computer knowledge and skills

The purpose of this online course is to ensure new nursing graduate students know how to use computer technologies required to complete academic and research activities. Powerful computers, high speed internet, digitalized resources and databases are widely available in educational institutes. New renovation and updates are being released at faster pace than ever. All these developments are necessary for a student to utilize computer programs and synthesize large amount of data in a limited time for any given academic research project. [See PDF for complete abstract]

A process evaluation of the childhood lead poisoning prevention program in Houston, Texas, 1992--1995

A process evaluation of the Houston Childhood Lead Poisoning Prevention Program, 1992-1995, was conducted. The Program's goal is to reduce lead poisoning prevalence. The study proposed to determine to what extent the Program was implemented as planned by measuring how well Program services were actually: (1) received by the intended target population; (2) delivered to children with elevated blood lead levels; (3) delivered in compliance with the Centers for Disease Control and Prevention and Program guidelines and timetables; and (4) able to reduce lead poisoning prevalence among those rescreened. Utilizing a program monitoring design, the Program's pre-collected computer records were reviewed. The study sample consisted of 820 children whose blood lead levels were above 15 micrograms per deciLiter, representing approximately 2.9% of the 28,406 screened over this period. Three blood lead levels from each participant were examined: the initial elevated result; the confirmatory result; and the next rescreen result, after the elevated confirmatory level. Results showed that the Program screened approximately 18% (28,406 of 161,569) of Houston's children under age 6 years for lead poisoning. Based on Chi-square tests of significance, results also showed that lead-poisoned participants were more likely to be younger than 3 years, male and Hispanic, compared to those not lead poisoned. The age, gender and ethnic differences observed were statistically significant (p =.01, p =.00, p =.00). Four of the six Program services: medical evaluations, rescreening, environmental inspections and confirmation, had satisfactory delivery completion rates of 71%-98%. Delivery timetable compliance rates for three of the six services examined: outreach contacts, home visits and environmental inspections were below 32%. However, dangerously elevated blood lead levels fell and lead poisoning prevalence dropped from 3.3% at initial screening to 1.2% among those rescreened, after intervention. From a public health perspective, reductions in lead poisoning prevalence are very meaningful. Based on these findings, the following are recommendations for future research: (1) integrate Program database files by utilizing a computer database management program; (2) target services at Hispanic male children under age 3 years living in the highest risk neighborhoods; (3) increase resources to: improve tracking and documentation of service delivery and provide more non-medical case management and environmental services; and (4) share the evaluation methodology/findings with the Centers for Disease Control and Prevention administrators; the implications may be relevant to other program managers conducting such assessments. ^

Modified 3+3 design for phase I clinical trials

Phase I clinical trial is mainly designed to determine the maximum tolerated dose (MTD) of a new drug. Optimization of phase I trial design is crucial to minimize the number of enrolled patients exposed to unsafe dose levels and to provide reliable information to the later phases of clinical trials. Although it has been criticized about its inefficient MTD estimation, nowadays the traditional 3+3 method remains dominant in practice due to its simplicity and conservative estimation. There are many new designs that have been proven to generate more credible MTD estimation, such as the Continual Reassessment Method (CRM). Despite its accepted better performance, the CRM design is still not widely used in real trials. There are several factors that contribute to the difficulties of CRM adaption in practice. First, CRM is not widely accepted by the regulatory agencies such as FDA in terms of safety. It is considered to be less conservative and tend to expose more patients above the MTD level than the traditional design. Second, CRM is relatively complex and not intuitive for the clinicians to fully understand. Third, the CRM method take much more time and need statistical experts and computer programs throughout the trial. The current situation is that the clinicians still tend to follow the trial process that they are comfortable with. This situation is not likely to change in the near future. Based on this situation, we have the motivation to improve the accuracy of MTD selection while follow the procedure of the traditional design to maintain simplicity. We found that in 3+3 method, the dose transition and the MTD determination are relatively independent. Thus we proposed to separate the two stages. The dose transition rule remained the same as 3+3 method. After getting the toxicity information from the dose transition stage, we combined the isotonic transformation to ensure the monotonic increasing order before selecting the optimal MTD. To compare the operating characteristics of the proposed isotonic method and the other designs, we carried out 10,000 simulation trials under different dose setting scenarios to compare the design characteristics of the isotonic modified method with standard 3+3 method, CRM, biased coin design (BC) and k-in-a-row design (KIAW). The isotonic modified method improved MTD estimation of the standard 3+3 in 39 out of 40 scenarios. The improvement is much greater when the target is 0.3 other than 0.25. The modified design is also competitive when comparing with other selected methods. A CRM method performed better in general but was not as stable as the isotonic method throughout the different dose settings. The results demonstrated that our proposed isotonic modified method is not only easily conducted using the same procedure as 3+3 but also outperforms the conventional 3+3 design. It can also be applied to determine MTD for any given TTL. These features make the isotonic modified method of practical value in phase I clinical trials.^

A MANAGEMENT INFORMATION SYSTEM AND EVALUATION SCHEME FOR THE UNIVERSITY OF TEXAS EMPLOYEE ASSISTANCE PROGRAMS

Early Employee Assistance Programs (EAPs) had their origin in humanitarian motives, and there was little concern for their cost/benefit ratios; however, as some programs began accumulating data and analyzing it over time, even with single variables such as absenteeism, it became apparent that the humanitarian reasons for a program could be reinforced by cost savings particularly when the existence of the program was subject to justification.^ Today there is general agreement that cost/benefit analyses of EAPs are desirable, but the specific models for such analyses, particularly those making use of sophisticated but simple computer based data management systems, are few.^ The purpose of this research and development project was to develop a method, a design, and a prototype for gathering managing and presenting information about EAPS. This scheme provides information retrieval and analyses relevant to such aspects of EAP operations as: (1) EAP personnel activities, (2) Supervisory training effectiveness, (3) Client population demographics, (4) Assessment and Referral Effectiveness, (5) Treatment network efficacy, (6) Economic worth of the EAP.^ This scheme has been implemented and made operational at The University of Texas Employee Assistance Programs for more than three years.^ Application of the scheme in the various programs has defined certain variables which remained necessary in all programs. Depending on the degree of aggressiveness for data acquisition maintained by program personnel, other program specific variables are also defined. ^

A systematic review and meta-analysis of diabetes disease management programs

Context. Despite the rapid growth of disease management programs, there are still questions about their efficacy and effectiveness for improving patient outcomes and their ability to reduce costs associated with chronic disease. ^ Objective. To determine the effectiveness of disease management programs on improving the results of HbA1c tests, lipid profiles and systolic blood pressure (SBP) readings among diabetics. These three quantitative measures are widely accepted methods of determining the quality of a patient's diabetes management and the potential for future complications. ^ Data Sources. MEDLINE and CINAHL were searched from 1950 to June 2008 using MeSH terms designed to capture all relevant studies. Scopus pearling and hand searching were also done. Only English language articles were selected. ^ Study Selection. Titles and abstracts for the 2347 articles were screened against predetermined inclusion and exclusion criteria, yielding 217 articles for full screening. After full article screening, 29 studies were selected for inclusion in the review. ^ Data Extraction. From the selected studies, data extraction included sample size, mean change over baseline, and standard deviation for each control and experimental arm. ^ Results. The pooled results show a mean HbA1c reduction of 0.64%, 95% CI (-0.83 to -0.44), mean SBP reduction of 7.39 mmHg (95% CI to -11.58 to -3.2), mean total cholesterol reduction of 5.74 mg/dL (95% CI, -10.01 to -1.43), and mean LDL cholesterol reduction of 3.74 mg/dL (95% CI, -8.34 to 0.87). Results for HbA1c, SBP and total cholesterol were statistically significant, while the results for LDL cholesterol were not. ^ Conclusions. The findings suggest that disease management programs utilizing five hallmarks of care can be effective at improving intermediate outcomes among diabetics. However, given the significant heterogeneity present, there may be fundamental differences with respect to study-specific interventions and populations that render them inappropriate for meta-analysis. ^

Texas electronics waste management: A policy analysis for the 21st century

Electronic waste is a fairly new and largely unknown phenomenon. Accordingly, governments have only recently acknowledged electronic waste as a threat to the environment and public health. In attempting to mitigate the hazards associated with this rapidly growing toxic waste stream, governments at all levels have started to implement e-waste management programs. The legislation enacted to create these programs is based on extended producer responsibility or EPR policy. ^ EPR shifts the burden of final disposal of e-waste from the consumer or municipal solid waste system to the manufacturer of electronic equipment. Applying an EPR policy is intended to send signals up the production chain to the manufacturer. The desired outcome is to change the methods of production in order to reduce production outputs/inputs with the ultimate goal of changing product design. This thesis performs a policy analysis of the current e-waste policies at the federal and state level of government, focusing specifically on Texas e-waste policies. ^ The Texas e-waste law known, as HB 2714 or the Texas Computer TakeBack Law, requires manufacturers to provide individual consumers with a free and convenient method for returning their used computers to manufacturers. The law is based on individual producer responsibility and shared responsibility among consumer, retailers, recyclers, and the TCEQ. ^ Using a set of evaluation criteria created by the Organization for Economic Co-operation and Development, the Texas e-waste law was examined to determine its effectiveness at reducing the threat of e-waste in Texas. Based on the outcomes of the analysis certain recommendations were made for the legislature to incorporate into HB 2714. ^ The results of the policy analysis show that HB 2714 is a poorly constructed law and does not provide the desired results seen in other states with EPR policies. The TakeBack Law does little to change the collection methods of manufacturers and even less to change their production habits. If the e-waste problem is to be taken seriously, HB 2714 must be amended to reflect the proposed changes in this thesis.^