Evaluation of Dietary Laidlomycin Propionate and Synovex Plus Implants for Enhancing Performance of Feedlot Steers

One hundred fifty crossbred yearling steers with an average weight of 876 pounds were used in a 111-day experiment. Steers received either 1) no implant and no ionophore, 2) Synovex Plus¨ and no ionophore, 3) Cattlyst¨ and no implant, 4) Synovex Plus¨ and Cattlyst¨, or 5) Revalor S¨ and Rumensin¨. Implanting steers with ) Synovex Plus¨ increased gain and improved feed efficiency compared with control steers. Compared with steers not implanted, steers implanted with Synovex Plus¨ had heavier carcasses and larger ribeye areas, but similar fat thickness and yield grades. Feeding Cattlyst¨ alone did not increase gain or improve feed conversion, but there was some improvement in feedlot performance when Cattlyst¨ was fed to steers implanted with Synovex Plus¨. Steers implanted with Synovex Plus¨ and fed Cattlyst¨ had superior gains to steers implanted with Revalor S¨ and fed Rumensin¨.

Evaluation of Wet Distillers Grains in Finishing Diets for Yearling Steers

A feeding trial was conducted with 940-lb yearling steers fed 113 days to determine the feeding value of distillers grains relative to corn grain. Replacing corn and urea with wet distillers grains for 20% of the diet dry matter tended to increase gain with no increase in feed consumption, resulting in improved feed conversion. Replacing 40% of diet dry matter with wet distillers grains decreased feed intake without affecting gains, and improved feed efficiency. The overall average estimated net energy value of wet distillers grains was 1.20 Mcal NEg per pound dry matter. This experiment confirmed the observations in previous cattle feeding experiments, that for finishing cattle wet distillers grains have a high energy value compared with cracked corn grain. Another objective of the study was to determine if cattle being fed wet distillers grains could be suddenly changed to a different diet if the supply of wet feed was suddenly disrupted. It was found that if intake is managed during the change, that distillers grains portion of the diet can be suddenly changed from wet to dry and then changed back to wet after a week, without sacrificing performance of the cattle.

Evaluation of Condensed Porcine Solubles as a Source of Supplemental Nitrogen in Corn-Based Finishing Diets for Yearling Steers

A feeding trial was conducted with 860-lb yearling steers fed 121 days to evaluate Condensed Porcine Solubles (Porcine Solubles) as a source of supplemental nitrogen for finishing cattle. Diets containing 5% soybean meal, 1.46% urea, and 2% or 4% Porcine Solubles were compared. When first offered, cattle did not want to consume feed containing the Porcine Solubles. Following adaptation, feed containing up to 4% Porcine Solubles was readily consumed. During the first 56 days, steers fed soybean meal gained faster and were more efficient than steers fed urea or Porcine Solubles. At the end of the trial there were no differences among the nitrogen supplements in feed intake, gain, or feed conversion. There were no significant differences in carcass weight or measures of carcass quality.

Effects of Initial Body Condition, Frame Size and Concentration of Dietary Energy on Performance of Finishing Steers

Steers were sorted into four groups based on hip height and fat cover at the start of the finishing period. Each group of sorted steers was fed a diet containing 0.59 or 0.64 Mcal NEg per pound of diet. Steers with less initial fat cover (.08 in.) gained slightly faster, consumed less feed, and therefore tended to be more efficient than steers with greater finish (.16 in.). Steers fed the lower-energy diet consumed more feed, gained similarly, and were less efficient than steers fed the higher-energy diet. The NRC computer model to evaluate beef cattle diets underpredicted performance of cattle in this experiment, but accurately predicted the differences in gain and feed efficiency observed between the leaner and fatter steers and between the two diets. In this study, the shorter steers (49.4 vs 52.2 in. initial height at the hip) gained faster with slightly greater feed intake and the same feed conversion.

Effect of Optimum® High Oil Corn on Performance and Carcass Characteristics of Finishing Yearling Steers

Steers fed Optimum® high oil corn had statistically similar live performance as steers fed isogenetic control corn or the control corn + fat. Numerically steers fed high oil corn gained 3% faster during the 107-day study with similar feed conversion. During the first half of the experiment, steers fed high oil corn did not perform as well as those fed control corn. During the second half of the experiment, steers fed high oil corn gained 21% faster and were 17% more efficient. There were no effects of feeding high oil corn on carcass characteristics, except there were more Choice carcasses from the steers fed high oil corn as compared with control corn (57% vs. 43% Choice).

Value of High-Oil and High-Protein Corn Grains for Finishing Cattle

Three specialty corns, high oil, high protein and high oil with high protein, were compared with control corn in a 113-day steer feeding trial. During the first 63 days of the study, steers fed the corns containing more oil had slower gain and poorer feed conversion compared with the control corn. At the end of the trial there were no statistically significant differences in performance of steers fed the different corns. Steers fed the high protein corn tended to have higher grading carcasses compared with those fed the control corn. Otherwise there were no differences in carcass measurements due to source of corn fed the steers. Feed cost of gain was reduced with the high-protein corn and the corn with high fat and high protein compared with the control corn because of similar feed conversions and the reduced amount of soybean meal needed to supplement the specialty corns.

Evaluation of Wet Distillers Grains for Finishing Cattle

A feeding trial was conducted with 870-lb steers fed 137 days to evaluate replacing cracked corn with dry and wet distillers grains with solubles (DGS) as feed for finishing cattle. Dry DGS was evaluated at 16% of diet dry matter. Wet DGS (WDGS) was evaluated at 14.6%, 26.2%, and 37.5% of diet dry matter. Control diets were supplemented with urea or a combination of urea and soybean meal. Feeding 16% dry DGS or 14.6% wet DGS increased rate of gain and tended to increase carcass fatness. Increasing the amount of wet DGS in the diet decreased feed intake, reduced gain, and improved feed conversion. The calculated net energy for gain values for dry and wet DGS were .92 and 1.5 times the energy value of corn grain. Economic returns declined slightly as the percentage of wet DGS increased in the diet, but remained above the two diets without DGS. The average benefits from feeding wet DGS averaged $25, $21, and $19 per head for steers fed 14.6%, 26.2%, and 35.7%, respectively, based on a formula price for wet DGS related to price of corn and including a charge for transportation of the wet feed.

Effect of Frame Size and Hormone Implant on Performance and Carcass Characteristics of Finishing Yearling Heifers: Returns to a Value-Based Market

Four groups of yearling heifers representing different frame sizes—small, medium, and large Angus and medium Simmental—were fed high-grain finishing diets to average Low Choice quality grade. Half the heifers were implanted with estrogen and trenbolone acetate. Backfat and ribeye area were measured by ultrasound four times during the study to assess growth of muscle and fat. Increasing frame size resulted in increased feed intake, greater rates of gain, and a trend towards reduced feed conversion. Greater returns would have been realized from each of the four groups had they been sold in a premium market based on yield grade rather than the conventional grade and yield market. Increasing frame size resulted in greater returns to the value-based market. Implants increased rate of gain and improved feed conversion but did not result in significantly greater returns to the value-based market compared with the grade and yield market. Ribeye area and backfat increased with body weight and time on feed. Increase in ribeye area was linear with time, whereas accumulation of backfat was exponential. Rate of increase in area of ribeye tended to increase and backfat tended to decrease as frame size increased. Implants increased rate of increase in ribeye area but had no effect on rate of deposition of subcutaneous fat. Equations describing growth of ribeye area and backfat for each group predicted average growth for the heifers but did not predict growth of individual heifers. Final carcass yield grade was related to initial thickness of backfat but not to initial ribeye area. These results indicate that the type of cattle selected to be fed for a premium market based on yield grade is important to the success of the program. More work is needed to develop growth equations from ultrasound measurements, but ultrasound will likely be a useful tool in selecting feeder cattle for a value-based market.