The Effects of Feeding a Live Microbial Product on Feedlot Performance and Carcass Value of Finishing Steers Fed Wet Corn Gluten Feed

This experiment was conducted to evaluate the efficacy of daily feeding a live microbial preparation containing two live organisms to finishing cattle. One organism was a lactobacillus, and the other was a propionibacterium, thought to work in concert to improve fermentation in the rumen and overall digestion. The study was conducted with Angus steers with an average initial weight of 550 lbs that were fed a finishing ration containing 50% wet corn gluten feed on a dry basis for 184 days. Feeding the microbial product improved daily gain and feed efficiency 1.7% and 2.4%, respectively, but the differences were not statistically significant. The microbial preparation increased carcass weights 1% but had no effects on quality or yield grades. It is concluded that potential benefits of this product are more likely to be greater when cattle are fed high grain rations rather than diets containing high concentrations of corn gluten feed.

Relative Feeding Value of Wet Corn Distillers Solubles as a Feed for Finishing Cattle

For 126 days, 850 lb. steers were fed diets of corn, corn silage, and ground hay containing either 0%, 4%, or 8% wet distillers solubles obtained from an Iowa dry mill ethanol plant. Addition of distillers solubles resulted in a linear decrease in feed consumption. Gains were increased 3.2% and decreased 6.4% by feeding 4% and 8% distillers solubles, respectively. Compared to the control diet, feed required per pound of gain was reduced 5% by low levels of distillers solubles and 1.5% by high levels. Feeding distillers solubles had no effect on carcass measurements. It was concluded that wet distillers solubles has value as a feed for cattle and can replace a portion of corn grain and supplemental nitrogen in a corn-based finishing diet for beef cattle. The decreased performance of steers fed the 8% level suggests that there might be a maximum amount of wet distiller solubles that can be fed to finishing cattle.

Potential Value of Ultrasound to Sort Feeder Cattle into More Uniform Groups for Finishing and Marketing

Cattle in three experiments were scanned with ultrasound as feeders to measure ribeye area and thickness of fat cover to determine if cattle could be sorted into outcome groups with respect to carcass yield. Sorting the cattle into low fat cover or large ribeye groups resulted in improved carcass yield grades. There were no effects on carcass quality grades related to sorting of the cattle. Cattle with greater fat cover at the beginning of the feeding period were heavier, seemed to be more mature and had less muscle growth during the finishing period. There were no significant differences in gain among the groups, but cattle with more fat cover had poorer feed efficiency. Ultrasound seems to have potential to sort feeder cattle, but before it can be used in practice, growth curves need to be developed to predict final end points of individual cattle.

Effects of Initial Body Condition, Frame Size and Concentration of Dietary Energy on Carcass Value of Finished Steers

Yearling steers were sorted into four groups based on hip height and fat cover at the start of the finishing period. Each group of sorted steers was fed diets containing 0.59 or 0.64 Mcal NEg per pound of diet. The value of each carcass was determined by use of the Oklahoma State University Boxed Beef Calculator. Sorting to increase hip height decreased the percentage of Choice carcasses and fat cover, increased ribeye area, and had no effect on carcass weight or yield grades 1 and 2. Sorting to decrease initial fat cover decreased carcass weight, carcass fat cover, and percentage of choice carcasses and increased the proportion of yield grades 1 and 2 carcasses. Concentration of energy in the finishing diet had no effect on carcass measurements. Increasing the percentage of yield grades 1 and 2 carcasses did not result in increased economic value of the carcasses when quality grades were lower and when there was a wide spread between Choice and Select carcasses, as occurred in 1996. With less spread between Choice and Select, as in 1997, sorting the cattle to increase yield grades 1 and 2 resulted in increased value, especially for close-trim boxed beef. The results of this study emphasize the importance of knowing how carcasses will grade before selecting a valuebased market for selling cattle.

Value of High-Oil Corn Grain for Finishing Steers

Rolled high-oil corn in comparison with rolled isogenetic control corn was fed to finishing steers as 33%, 66% and 100% of the corn grain in their diet in a 134-day feeding trial. During the first 75 days of the trial, steers fed highoil corn had numerically lower rates of gain and tended to have poorer feed conversions compared with the control corn. At the end of the trial, there were not statistically significant differences in performance or carcass measurements of the steers fed the different amounts of high-oil or control corns. The results of this study indicated that the steers did not respond to the higher energy content of high-oil corn.

Value of High-Oil and High-Protein Corn Grains for Finishing Cattle

Three specialty corns, high oil, high protein and high oil with high protein, were compared with control corn in a 113-day steer feeding trial. During the first 63 days of the study, steers fed the corns containing more oil had slower gain and poorer feed conversion compared with the control corn. At the end of the trial there were no statistically significant differences in performance of steers fed the different corns. Steers fed the high protein corn tended to have higher grading carcasses compared with those fed the control corn. Otherwise there were no differences in carcass measurements due to source of corn fed the steers. Feed cost of gain was reduced with the high-protein corn and the corn with high fat and high protein compared with the control corn because of similar feed conversions and the reduced amount of soybean meal needed to supplement the specialty corns.

Strategies for Optimizing Value of Finished Cattle in Value-Based Marketing Grids

Performance and carcass data from 624 steers in three experiments were used to evaluate potential strategies that might be used with incoming feeders to remove animals that produce low value carcasses when cattle are sold in a valuebased grid. Removing 10% of the carcasses with the lowest net value from each group increased the overall average net value of the remaining carcasses $17.50 to $21.09. Carcass weight was found to be the most significant factor determining net value of the carcass. Gain of the steers during the first 3 to 5 weeks of the feeding period was significantly related to average final gain and carcass value, but accounted for a small portion of the overall variation in gain or carcass value. Use of initial gain was successful in identifying ten of the sixty-four carcasses with least net value in a value-based grid. Adding frame score and measurement of initial thickness of backfat along with initial gain did not significantly improve identification of the low-value carcasses. Sorting the steers as feeders based on frame score and initial thickness of backfat resulted in differences in performance and carcass measurements. The low-value carcasses tended to be concentrated in the smaller-framed steers.

Effects of Feeding Cobalt Dextro Lac (CDL) on Feedlot Performance and Carcass Value of Finishing Steers Fed Wet Corn Gluten Feed

A 192-day experiment involving 144 young Angus steers fed growing and finishing diets containing 20% corn gluten feed was conducted to evaluate feeding a soluble source of readily available cobalt. No benefits were observed in rate of gain, feed intake or carcass value by feeding the available source of cobalt.

Relative Feeding Value of Wet Corn Steep Liquor When Fed to Finishing Cattle

Corn steep liquor is a liquid by-product containing condensed steep water and condensed distillers solubles from a wet corn milling plant. Finishing steers weighing nine hundred and seventy-five pounds were fed cornbased finishing diets containing 0%, 6%, or 12% corn steep liquor for 84 days. Feeding corn steep liquor did not affect performance of the steers or carcass characteristics. Based on value of feeds replaced in the diet, steep liquor had a value of $55 to $60/ton (50% dry matter) when used to replace corn and supplemental protein in a corn-based finishing diet.

Relative Value of White Corn When Fed to Finishing Cattle and Its Effects on Color of Carcass Fat

White corn was compared with yellow corn in a 180-day finishing trial with 600 lb. Angus steers fed 90% concentrate diets. Steers fed yellow corn consumed 3.3% less feed and were 3.8% more efficient in feed utilization. Rate of gain and carcass characteristics were similar for steers fed white or yellow corn. The color of subcutaneous fat over the ribs was significantly whiter from carcasses of steers fed white corn compared with those fed yellow corn. The results of this study indicate that white corn may be used instead of barley to produce whiter fat in beef carcasses.

Nutritive Value of the Crop Residues from bt-Corn Hybrids and Their Effects on Performance of Grazing Beef Cows

One non bt-corn hybrid (Pioneer 3489) and three btcorn hyrids (Pioneer 34RO7, Novartis NX6236, and Novartis N64-Z4) were planted in replicated 7.1-acre fields. After grain harvest, fields were stocked with 3 mature cows in midgestation to be strip-grazed as four paddocks over 126 days. Six similar cows were allotted to replicated drylots. All cows were fed hay as necessary to maintain a condition score of 5 on a 9-point scale. Cows were condition-scored biweekly and weighed monthly. Forage yield and weathering losses were determined by sampling one 4-m2 location per grazed or ungrazed paddock in each field with a minimum total of 2 locations of grazed or ungrazed forage per field. To measure forage selection during grazing, samples of grazed forage were collected from the rumen of one fistulated steer that grazed for 2 hours after ruminal evacuation. Non-bt-corn hybrids had greater (P<.05) infestation of corn borers in the upper stalk, lower stalk and ear shank than bt-corn hybrids. However, there were no differences in grain yields or dropped grain between hybrids. Crop residue dry matter, organic matter and in vitro digestible dry matter yields at the initiation of grazing did not differ between corn hybrids. Dry matter, organic matter and in vitro digestible dry matter losses tended (P<.10) to be greater from the NX6236 and N64-Z4 hybrids than from the 3489 and 34RO7 hybrids and were greater (P<.05) from grazed than non-grazed areas of the fields. At the initiation of grazing, dry matter concentrations of the crop residues from the NX6236 and N64-Z4 hybrids tended to be lower than those from the 3489 and 34RO7 hybrids. Crop residues from the NX6236 and N64-74 hybrids had lower concentrations of acid detergent fiber (P<.05) and acid detergent lignin (P=.07) and higher concentrations of in vitro digestible organic matter than the 3489 and 34RO7 hybrids. Over the grazing season, corn hybrid did not affect mean rates of change in forage composition. The concentration of in vitro digestible organic matter in forage selected by steers after two weeks of grazing did not differ. However, steers grazing corn crop residues consumed forage with higher (P<.05) concentrations of neutral detergent fiber, acid detergent fiber, and acid detergent insoluble nitrogen than steers fed hay. The acid detergent fiber concentration of forage selected by steers grazing the 3489 and N64-Z4 hybrids was lower (P < .05) than concentrations from the 34RO7 and NX6236 hybrids. In order to maintain similar body condition score changes, cows grazing crop residues from the 3489, 34RO7, NX6236, and N64-Z4 hybrids required 650, 628, 625, and 541 kg hay DM/cow compared with a hay requirement of 1447 kg hay DM/cow for cows maintained in a drylot.

Estimating the Value of Source Verification in Iowa Feeder Cattle Markets

Source verification and pooling of feeder cattle into larger lots resulted in higher selling prices compared to more typical sales at a southern Iowa auction market. After higher prices due to larger lot sizes were accounted for, cattle that received a specified management program and were source verified as to origin received additional price premiums. The data do not distinguish between the value of the specific management program and the value of the source verification process. However, cow–calf producers participating in the program took home more money.

Estimating the Value of Source Verification in Iowa Feeder Cattle Markets

Source verification and pooling of feeder cattle into larger lots resulted in higher selling prices compared with more typical sales at a southern Iowa auction market. After accounting for higher prices due to larger lot sizes, cattle that received a specified management program and were source verified as to origin received additional price premiums. The data do not distinguish between the value of the specific management program and the value of the source verification process. However, cow-calf producers participating in the program took home more money.